Логотип exploitDog
Консоль
Логотип exploitDog

exploitDog

fstec логотип

BDU:2026-02219

Опубликовано: 26 мая 2022
Источник: fstec
CVSS3: 5.5
CVSS2: 4.6
EPSS Низкий

Описание

Уязвимость функции gpio_keys_quiesce_key() модуля drivers/input/keyboard/gpio_keys.c драйвера поддержки клавиатуры ядра операционной системы Linux связана с некорректной инициализацией. Эксплуатация уязвимости может позволить нарушителю вызвать отказ в обслуживании

Вендор

Canonical Ltd.
Red Hat Inc.
Сообщество свободного программного обеспечения

Наименование ПО

Ubuntu
Red Hat Enterprise Linux
Linux

Версия ПО

20.04 LTS (Ubuntu)
22.04 LTS (Ubuntu)
9 (Red Hat Enterprise Linux)
от 5.16 до 5.17.13 включительно (Linux)
от 5.18 до 5.18.2 включительно (Linux)
от 5.13 до 5.15.45 включительно (Linux)

Тип ПО

Операционная система

Операционные системы и аппаратные платформы

Canonical Ltd. Ubuntu 20.04 LTS
Canonical Ltd. Ubuntu 22.04 LTS
Red Hat Inc. Red Hat Enterprise Linux 9
Сообщество свободного программного обеспечения Linux от 5.16 до 5.17.13 включительно
Сообщество свободного программного обеспечения Linux от 5.18 до 5.18.2 включительно
Сообщество свободного программного обеспечения Linux от 5.13 до 5.15.45 включительно

Уровень опасности уязвимости

Средний уровень опасности (базовая оценка CVSS 2.0 составляет 4,6)
Средний уровень опасности (базовая оценка CVSS 3.1 составляет 5,5)

Возможные меры по устранению уязвимости

В условиях отсутствия обновлений безопасности от производителя рекомендуется придерживаться "Рекомендаций по безопасной настройке операционных систем LINUX", изложенных в методическом документе ФСТЭК России, утверждённом 25 декабря 2022 года.
Использование рекомендаций:
Для Linux:
https://git.kernel.org/stable/c/4160e09619086fc155b51ccdb3462a3f233a5f4b
https://git.kernel.org/stable/c/8b1ae300c2953257c146b5f0757537935c0b6027
https://git.kernel.org/stable/c/96c460687813915dedca9dd7d04ae0e90607fd79
https://www.cve.org/CVERecord?id=CVE-2022-49430
https://lore.kernel.org/linux-cve-announce/2025022655-CVE-2022-49430-3b17@gregkh/
https://git.kernel.org/linus/cee409bbba0d1bd3fb73064fb480ff365f453b5d
https://kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.46
https://kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.17.14
https://kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.18.3
Для программных продуктов Red Hat Inc.:
https://access.redhat.com/security/cve/cve-2022-49430
Для Ubuntu:
https://ubuntu.com/security/CVE-2022-49430

Статус уязвимости

Подтверждена производителем

Наличие эксплойта

Данные уточняются

Информация об устранении

Уязвимость устранена

Идентификаторы других систем описаний уязвимостей

EPSS

Процентиль: 17%
0.00256
Низкий

5.5 Medium

CVSS3

4.6 Medium

CVSS2

Связанные уязвимости

CVSS3: 5.5
ubuntu
больше 1 года назад

In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - cancel delayed work only in case of GPIO gpio_keys module can either accept gpios or interrupts. The module initializes delayed work in case of gpios only and is only used if debounce timer is not used, so make sure cancel_delayed_work_sync() is called only when its gpio-backed and debounce_use_hrtimer is false. This fixes the issue seen below when the gpio_keys module is unloaded and an interrupt pin is used instead of GPIO: [ 360.297569] ------------[ cut here ]------------ [ 360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470 [ 360.310531] Modules linked in: gpio_keys(-) [ 360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166 [ 360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT) [ 360.331270] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 360.338318] pc : __flu...

CVSS3: 5.5
redhat
больше 1 года назад

In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - cancel delayed work only in case of GPIO gpio_keys module can either accept gpios or interrupts. The module initializes delayed work in case of gpios only and is only used if debounce timer is not used, so make sure cancel_delayed_work_sync() is called only when its gpio-backed and debounce_use_hrtimer is false. This fixes the issue seen below when the gpio_keys module is unloaded and an interrupt pin is used instead of GPIO: [ 360.297569] ------------[ cut here ]------------ [ 360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470 [ 360.310531] Modules linked in: gpio_keys(-) [ 360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166 [ 360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT) [ 360.331270] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 360.338318] pc : __flu...

CVSS3: 5.5
nvd
больше 1 года назад

In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - cancel delayed work only in case of GPIO gpio_keys module can either accept gpios or interrupts. The module initializes delayed work in case of gpios only and is only used if debounce timer is not used, so make sure cancel_delayed_work_sync() is called only when its gpio-backed and debounce_use_hrtimer is false. This fixes the issue seen below when the gpio_keys module is unloaded and an interrupt pin is used instead of GPIO: [ 360.297569] ------------[ cut here ]------------ [ 360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470 [ 360.310531] Modules linked in: gpio_keys(-) [ 360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166 [ 360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT) [ 360.331270] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 360.338318] pc : __fl

CVSS3: 5.5
debian
больше 1 года назад

In the Linux kernel, the following vulnerability has been resolved: I ...

CVSS3: 5.5
github
10 месяцев назад

In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - cancel delayed work only in case of GPIO gpio_keys module can either accept gpios or interrupts. The module initializes delayed work in case of gpios only and is only used if debounce timer is not used, so make sure cancel_delayed_work_sync() is called only when its gpio-backed and debounce_use_hrtimer is false. This fixes the issue seen below when the gpio_keys module is unloaded and an interrupt pin is used instead of GPIO: [ 360.297569] ------------[ cut here ]------------ [ 360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470 [ 360.310531] Modules linked in: gpio_keys(-) [ 360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166 [ 360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT) [ 360.331270] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 360.338318] pc : _...

EPSS

Процентиль: 17%
0.00256
Низкий

5.5 Medium

CVSS3

4.6 Medium

CVSS2