Описание
Уязвимость функции __cdns3_gadget_init() модуля drivers/usb/cdns3/cdns3-gadget.c драйвера устройств шины USB ядра операционной системы Linux связана с некорректным определением внутреннего состояния. Эксплуатация уязвимости может позволить нарушителю оказать воздействие на конфиденциальность, целостность и доступность защищаемой информации
Вендор
Наименование ПО
Версия ПО
Тип ПО
Операционные системы и аппаратные платформы
Уровень опасности уязвимости
Возможные меры по устранению уязвимости
Статус уязвимости
Наличие эксплойта
Информация об устранении
Ссылки на источники
Идентификаторы других систем описаний уязвимостей
- CVE
EPSS
7 High
CVSS3
6 Medium
CVSS2
Связанные уязвимости
In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix state inconsistency on gadget init failure When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode while software state remains INACTIVE, creating hardware/software state inconsistency. When switching to host mode via sysfs: echo host > /sys/class/usb_role/13180000.usb-role-switch/role The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error, so cdns_role_stop() skips cleanup because state is still INACTIVE. This violates the DRD controller design specification (Figure22), which requires returning to idle state before switching roles. This leads to a synchronous external abort in xhci_gen_setup() when setting up the host controller: [ 516.440698] configfs-gadget 13180000.usb: failed to start g1: -19 [ 516.442035] cdns-usb3 13180000.usb: Failed to add gadget [ 516.443278] cdns-usb3 13180000.usb: set role 2 has failed ... [ 1301.375722] xhci-hcd xhci-hcd.1.auto: ...
In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix state inconsistency on gadget init failure When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode while software state remains INACTIVE, creating hardware/software state inconsistency. When switching to host mode via sysfs: echo host > /sys/class/usb_role/13180000.usb-role-switch/role The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error, so cdns_role_stop() skips cleanup because state is still INACTIVE. This violates the DRD controller design specification (Figure22), which requires returning to idle state before switching roles. This leads to a synchronous external abort in xhci_gen_setup() when setting up the host controller: [ 516.440698] configfs-gadget 13180000.usb: failed to start g1: -19 [ 516.442035] cdns-usb3 13180000.usb: Failed to add gadget [ 516.443278] cdns-usb3 13180000.usb: set role 2 has failed ... [ 1301.375722] xhci-hcd xhci-hcd.1.auto: ...
In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix state inconsistency on gadget init failure When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode while software state remains INACTIVE, creating hardware/software state inconsistency. When switching to host mode via sysfs: echo host > /sys/class/usb_role/13180000.usb-role-switch/role The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error, so cdns_role_stop() skips cleanup because state is still INACTIVE. This violates the DRD controller design specification (Figure22), which requires returning to idle state before switching roles. This leads to a synchronous external abort in xhci_gen_setup() when setting up the host controller: [ 516.440698] configfs-gadget 13180000.usb: failed to start g1: -19 [ 516.442035] cdns-usb3 13180000.usb: Failed to add gadget [ 516.443278] cdns-usb3 13180000.usb: set role 2 has failed ... [ 1301.375722] xhci-hcd xhci-hcd.1.a
In the Linux kernel, the following vulnerability has been resolved: u ...
In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix state inconsistency on gadget init failure When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode while software state remains INACTIVE, creating hardware/software state inconsistency. When switching to host mode via sysfs: echo host > /sys/class/usb_role/13180000.usb-role-switch/role The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error, so cdns_role_stop() skips cleanup because state is still INACTIVE. This violates the DRD controller design specification (Figure22), which requires returning to idle state before switching roles. This leads to a synchronous external abort in xhci_gen_setup() when setting up the host controller: [ 516.440698] configfs-gadget 13180000.usb: failed to start g1: -19 [ 516.442035] cdns-usb3 13180000.usb: Failed to add gadget [ 516.443278] cdns-usb3 13180000.usb: set role 2 has failed ... [ 1301.375722] xhci-hcd xhci-hcd....
EPSS
7 High
CVSS3
6 Medium
CVSS2