Описание
Уязвимость функции xhci_irq() модуля drivers/usb/host/xhci-ring.c драйвера устройств шины USB ядра операционной системы Linux связана с ошибками управления состоянием. Эксплуатация уязвимости может позволить нарушителю вызвать отказ в обслуживании
Вендор
Наименование ПО
Версия ПО
Тип ПО
Операционные системы и аппаратные платформы
Уровень опасности уязвимости
Возможные меры по устранению уязвимости
Статус уязвимости
Наличие эксплойта
Информация об устранении
Ссылки на источники
Идентификаторы других систем описаний уязвимостей
- CVE
EPSS
5.5 Medium
CVSS3
4.6 Medium
CVSS2
Связанные уязвимости
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Prevent interrupt storm on host controller error (HCE) The xHCI controller reports a Host Controller Error (HCE) in UAS Storage Device plug/unplug scenarios on Android devices. HCE is checked in xhci_irq() function and causes an interrupt storm (since the interrupt isn’t cleared), leading to severe system-level faults. When the xHC controller reports HCE in the interrupt handler, the driver only logs a warning and assumes xHC activity will stop as stated in xHCI specification. An interrupt storm does however continue on some hosts even after HCE, and only ceases after manually disabling xHC interrupt and stopping the controller by calling xhci_halt(). Add xhci_halt() to xhci_irq() function where STS_HCE status is checked, mirroring the existing error handling pattern used for STS_FATAL errors. This only fixes the interrupt storm. Proper HCE recovery requires resetting and re-initializing the xHC.
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Prevent interrupt storm on host controller error (HCE) The xHCI controller reports a Host Controller Error (HCE) in UAS Storage Device plug/unplug scenarios on Android devices. HCE is checked in xhci_irq() function and causes an interrupt storm (since the interrupt isn’t cleared), leading to severe system-level faults. When the xHC controller reports HCE in the interrupt handler, the driver only logs a warning and assumes xHC activity will stop as stated in xHCI specification. An interrupt storm does however continue on some hosts even after HCE, and only ceases after manually disabling xHC interrupt and stopping the controller by calling xhci_halt(). Add xhci_halt() to xhci_irq() function where STS_HCE status is checked, mirroring the existing error handling pattern used for STS_FATAL errors. This only fixes the interrupt storm. Proper HCE recovery requires resetting and re-initializing the xHC.
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Prevent interrupt storm on host controller error (HCE) The xHCI controller reports a Host Controller Error (HCE) in UAS Storage Device plug/unplug scenarios on Android devices. HCE is checked in xhci_irq() function and causes an interrupt storm (since the interrupt isn’t cleared), leading to severe system-level faults. When the xHC controller reports HCE in the interrupt handler, the driver only logs a warning and assumes xHC activity will stop as stated in xHCI specification. An interrupt storm does however continue on some hosts even after HCE, and only ceases after manually disabling xHC interrupt and stopping the controller by calling xhci_halt(). Add xhci_halt() to xhci_irq() function where STS_HCE status is checked, mirroring the existing error handling pattern used for STS_FATAL errors. This only fixes the interrupt storm. Proper HCE recovery requires resetting and re-initializing the xHC.
In the Linux kernel, the following vulnerability has been resolved: u ...
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Prevent interrupt storm on host controller error (HCE) The xHCI controller reports a Host Controller Error (HCE) in UAS Storage Device plug/unplug scenarios on Android devices. HCE is checked in xhci_irq() function and causes an interrupt storm (since the interrupt isn’t cleared), leading to severe system-level faults. When the xHC controller reports HCE in the interrupt handler, the driver only logs a warning and assumes xHC activity will stop as stated in xHCI specification. An interrupt storm does however continue on some hosts even after HCE, and only ceases after manually disabling xHC interrupt and stopping the controller by calling xhci_halt(). Add xhci_halt() to xhci_irq() function where STS_HCE status is checked, mirroring the existing error handling pattern used for STS_FATAL errors. This only fixes the interrupt storm. Proper HCE recovery requires resetting and re-initializing the xHC.
EPSS
5.5 Medium
CVSS3
4.6 Medium
CVSS2