Логотип exploitDog
Консоль
Логотип exploitDog

exploitDog

nvd логотип

CVE-2026-43466

Опубликовано: 08 мая 2026
Источник: nvd
CVSS3: 8.2
EPSS Низкий

Описание

In the Linux kernel, the following vulnerability has been resolved:

net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery

In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer.

After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery.

The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched.

Remove the 'dma_fifo_cc = 0' reset.

This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tu

Уязвимые конфигурации

Конфигурация 1

Одно из

cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
Версия от 4.17 (включая) до 5.10.253 (исключая)
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
Версия от 5.11 (включая) до 5.15.203 (исключая)
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
Версия от 5.16 (включая) до 6.1.167 (исключая)
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
Версия от 6.2 (включая) до 6.6.130 (исключая)
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
Версия от 6.7 (включая) до 6.12.78 (исключая)
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
Версия от 6.13 (включая) до 6.18.19 (исключая)
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
Версия от 6.19 (включая) до 6.19.9 (исключая)
cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*
cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*
cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*

EPSS

Процентиль: 25%
0.00329
Низкий

8.2 High

CVSS3

Дефекты

NVD-CWE-noinfo

Связанные уязвимости

CVSS3: 8.2
ubuntu
3 месяца назад

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_...

CVSS3: 5.5
redhat
3 месяца назад

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_...

CVSS3: 8.2
debian
3 месяца назад

In the Linux kernel, the following vulnerability has been resolved: n ...

CVSS3: 8.2
github
3 месяца назад

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl...

CVSS3: 8.2
fstec
3 месяца назад

Уязвимость функции mlx5e_reset_txqsq_cc_pc() драйвера mlx5e ядра операционных систем Linux, позволяющая нарушителю вызвать отказ в обслуживании

EPSS

Процентиль: 25%
0.00329
Низкий

8.2 High

CVSS3

Дефекты

NVD-CWE-noinfo