Логотип exploitDog
Консоль
Логотип exploitDog

exploitDog

redhat логотип

CVE-2026-43371

Опубликовано: 08 мая 2026
Источник: redhat

Описание

In the Linux kernel, the following vulnerability has been resolved: net: macb: Shuffle the tx ring before enabling tx Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board, the rootfs may take an extended time to recover after a suspend. Upon investigation, it was determined that the issue originates from a problem in the macb driver. According to the Zynq UltraScale TRM [1], when transmit is disabled, the transmit buffer queue pointer resets to point to the address specified by the transmit buffer queue base address register. In the current implementation, the code merely resets queue->tx_head and queue->tx_tail to '0'. This approach presents several issues:

  • Packets already queued in the tx ring are silently lost, leading to memory leaks since the associated skbs cannot be released.
  • Concurrent write access to queue->tx_head and queue->tx_tail may occur from macb_tx_poll() or macb_start_xmit() when these values are reset to '0'.
  • The transmission may become stuck on a packet that has already been sent out, with its 'TX_USED' bit set, but has not yet been processed. However, due to the manipulation of 'queue->tx_head' and 'queue->tx_tail', macb_tx_poll() incorrectly assumes there are no packets to handle because queue->tx_head == queue->tx_tail. This issue is only resolved when a new packet is placed at this position. This is the root cause of the prolonged recovery time observed for the NFS root filesystem. To resolve this issue, shuffle the tx ring and tx skb array so that the first unsent packet is positioned at the start of the tx ring. Additionally, ensure that updates to queue->tx_head and queue->tx_tail are properly protected with the appropriate lock. [1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm

    A flaw was found in the Linux kernel's macb driver. When the transmit function is disabled, the driver incorrectly resets the transmit queue pointers without properly handling packets already in the queue. This can lead to silent loss of queued packets, memory leaks, and potential race conditions during concurrent access to the queue pointers. The most significant impact is a prolonged system recovery time, effectively causing a Denial of Service (DoS) for affected systems, such as those using an NFS (Network File System) root filesystem after a suspend operation.

Затронутые пакеты

ПлатформаПакетСостояниеРекомендацияРелиз
Red Hat Enterprise Linux 10kernelNot affected
Red Hat Enterprise Linux 6kernelNot affected
Red Hat Enterprise Linux 7kernelNot affected
Red Hat Enterprise Linux 7kernel-rtNot affected
Red Hat Enterprise Linux 8kernelNot affected
Red Hat Enterprise Linux 8kernel-rtNot affected
Red Hat Enterprise Linux 9kernelNot affected
Red Hat Enterprise Linux 9kernel-rtNot affected

Показывать по

Дополнительная информация

Дефект:
CWE-413
https://bugzilla.redhat.com/show_bug.cgi?id=2468220kernel: net: macb: Shuffle the tx ring before enabling tx

Связанные уязвимости

CVSS3: 5.5
ubuntu
3 месяца назад

In the Linux kernel, the following vulnerability has been resolved: net: macb: Shuffle the tx ring before enabling tx Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board, the rootfs may take an extended time to recover after a suspend. Upon investigation, it was determined that the issue originates from a problem in the macb driver. According to the Zynq UltraScale TRM [1], when transmit is disabled, the transmit buffer queue pointer resets to point to the address specified by the transmit buffer queue base address register. In the current implementation, the code merely resets `queue->tx_head` and `queue->tx_tail` to '0'. This approach presents several issues: - Packets already queued in the tx ring are silently lost, leading to memory leaks since the associated skbs cannot be released. - Concurrent write access to `queue->tx_head` and `queue->tx_tail` may occur from `macb_tx_poll()` or `macb_start_xmit()` when these values are reset to '0'. - The transmission ma...

CVSS3: 5.5
nvd
3 месяца назад

In the Linux kernel, the following vulnerability has been resolved: net: macb: Shuffle the tx ring before enabling tx Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board, the rootfs may take an extended time to recover after a suspend. Upon investigation, it was determined that the issue originates from a problem in the macb driver. According to the Zynq UltraScale TRM [1], when transmit is disabled, the transmit buffer queue pointer resets to point to the address specified by the transmit buffer queue base address register. In the current implementation, the code merely resets `queue->tx_head` and `queue->tx_tail` to '0'. This approach presents several issues: - Packets already queued in the tx ring are silently lost, leading to memory leaks since the associated skbs cannot be released. - Concurrent write access to `queue->tx_head` and `queue->tx_tail` may occur from `macb_tx_poll()` or `macb_start_xmit()` when these values are reset to '0'. - The trans

CVSS3: 5.5
debian
3 месяца назад

In the Linux kernel, the following vulnerability has been resolved: n ...

CVSS3: 5.5
github
3 месяца назад

In the Linux kernel, the following vulnerability has been resolved: net: macb: Shuffle the tx ring before enabling tx Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board, the rootfs may take an extended time to recover after a suspend. Upon investigation, it was determined that the issue originates from a problem in the macb driver. According to the Zynq UltraScale TRM [1], when transmit is disabled, the transmit buffer queue pointer resets to point to the address specified by the transmit buffer queue base address register. In the current implementation, the code merely resets `queue->tx_head` and `queue->tx_tail` to '0'. This approach presents several issues: - Packets already queued in the tx ring are silently lost, leading to memory leaks since the associated skbs cannot be released. - Concurrent write access to `queue->tx_head` and `queue->tx_tail` may occur from `macb_tx_poll()` or `macb_start_xmit()` when these values are reset to '0'. - The tr...

oracle-oval
26 дней назад

ELSA-2026-50372: Unbreakable Enterprise kernel security update (IMPORTANT)