Описание
In the Linux kernel, the following vulnerability has been resolved:
i2c: stub: Reject I2C block transfers with invalid length
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().
A flaw was found in the Linux kernel's i2c-stub driver. A local user with access to the /dev/i2c-* device can exploit this vulnerability by issuing an I2C System Management Bus (SMBus) input/output control (ioctl) command with a specially crafted block transfer length. This invalid length can cause the driver to read or write beyond the allocated buffer, leading to a stack-out-of-bounds error and a system crash, resulting in a Denial of Service (DoS).
Затронутые пакеты
| Платформа | Пакет | Состояние | Рекомендация | Релиз |
|---|---|---|---|---|
| Red Hat Enterprise Linux 10 | kernel | Affected | ||
| Red Hat Enterprise Linux 6 | kernel | Not affected | ||
| Red Hat Enterprise Linux 7 | kernel | Affected | ||
| Red Hat Enterprise Linux 7 | kernel-rt | Affected | ||
| Red Hat Enterprise Linux 8 | kernel | Affected | ||
| Red Hat Enterprise Linux 8 | kernel-rt | Affected | ||
| Red Hat Enterprise Linux 9 | kernel | Affected | ||
| Red Hat Enterprise Linux 9 | kernel-rt | Affected |
Показывать по
Дополнительная информация
Статус:
EPSS
7 High
CVSS3
Связанные уязвимости
In the Linux kernel, the following vulnerability has been resolved: i2c: stub: Reject I2C block transfers with invalid length The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0] as the transfer length. The existing check only clamps it to avoid overrunning the chip->words[256] register array, but does not validate it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union i2c_smbus_data.block buffer (34 bytes total). The driver is a development/test tool (CONFIG_I2C_STUB=m, not built by default) that must be loaded with a chip_addr= parameter. A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing stub_xfer() to read or write past the end of the union i2c_smbus_data.block buffer: BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223) Read of size 1 at addr ffff88800abcfd92 by task exploit/81 Call Trace: <TASK> stub_xfer (drivers/i2c/i2c-stub.c:223) __i2c_smbus_xf...
In the Linux kernel, the following vulnerability has been resolved: i2c: stub: Reject I2C block transfers with invalid length The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0] as the transfer length. The existing check only clamps it to avoid overrunning the chip->words[256] register array, but does not validate it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union i2c_smbus_data.block buffer (34 bytes total). The driver is a development/test tool (CONFIG_I2C_STUB=m, not built by default) that must be loaded with a chip_addr= parameter. A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing stub_xfer() to read or write past the end of the union i2c_smbus_data.block buffer: BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223) Read of size 1 at addr ffff88800abcfd92 by task exploit/81 Call Trace: <TASK> stub_xfer (drivers/i2c/i2c-stub.c:223) __i2
In the Linux kernel, the following vulnerability has been resolved: i ...
In the Linux kernel, the following vulnerability has been resolved: i2c: stub: Reject I2C block transfers with invalid length The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0] as the transfer length. The existing check only clamps it to avoid overrunning the chip->words[256] register array, but does not validate it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union i2c_smbus_data.block buffer (34 bytes total). The driver is a development/test tool (CONFIG_I2C_STUB=m, not built by default) that must be loaded with a chip_addr= parameter. A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing stub_xfer() to read or write past the end of the union i2c_smbus_data.block buffer: BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223) Read of size 1 at addr ffff88800abcfd92 by task exploit/81 Call Trace: <TASK> stub_xfer (drivers/i2c/i2c-stub.c:223) _...
EPSS
7 High
CVSS3