Описание
In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.
Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.
Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.
The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range.
A flaw was found in the i2c-imx driver of the Linux kernel. When an I2C slave device performs an SMBus block-read operation with a byte count of zero, the atomic (polling) path in the driver fails to properly release the I2C bus. This can cause the bus to become stuck, requiring a power cycle of the I2C controller to restore functionality. This issue leads to a denial of service for the affected system.
Отчет
A low severity denial of service flaw was found in the i2c-imx driver of the Linux kernel, affecting the kernel and kernel-rt packages in Red Hat Enterprise Linux 9 and 10 and Red Hat In-Vehicle OS. When an SMBus block-read transaction returns a byte count of zero, or a count above I2C_SMBUS_BLOCK_MAX, the atomic (polling) path of the i2c-imx driver returns an error without issuing a NACK and STOP to terminate the transfer. Because the next receive cycle has already been armed, the I2C target keeps holding SDA, leaving the I2C bus locked until the i2c controller is power cycled, resulting in a denial of service limited to the affected I2C bus and controller. The flaw is local in nature (CVSS:3.1 AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H, base score 5.5) and has no impact on confidentiality or integrity. Red Hat Enterprise Linux 6, 7, and 8 are not affected because the vulnerable code is not present in those releases. Given the low severity of this issue, the fix for the affected Red Hat Enterprise Linux 9, Red Hat Enterprise Linux 10, and Red Hat In-Vehicle OS streams is deferred to a future update; the residual risk is a local denial of service confined to the I2C bus and controller of the affected system.
Меры по смягчению последствий
Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base, or stability.
Затронутые пакеты
| Платформа | Пакет | Состояние | Рекомендация | Релиз |
|---|---|---|---|---|
| Red Hat Enterprise Linux 10 | kernel | Fix deferred | ||
| Red Hat Enterprise Linux 6 | kernel | Not affected | ||
| Red Hat Enterprise Linux 7 | kernel | Not affected | ||
| Red Hat Enterprise Linux 7 | kernel-rt | Not affected | ||
| Red Hat Enterprise Linux 8 | kernel | Not affected | ||
| Red Hat Enterprise Linux 8 | kernel-rt | Not affected | ||
| Red Hat Enterprise Linux 9 | kernel | Fix deferred | ||
| Red Hat Enterprise Linux 9 | kernel-rt | Fix deferred |
Показывать по
Дополнительная информация
Статус:
EPSS
5.5 Medium
CVSS3
Связанные уязвимости
In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (atomic) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic (polling) path rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle for this i2c controller. Reading I2DR to obtain the count likewise arms the next byte on the count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly and left the bus held. Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so the existing last-byte handling emits STOP; the dummy byte is discarded. A count of 0 is a valid empty block read; a count above I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus has been released. The interrupt-driven path has the same flaw from a later commit and is fixed separately, as it carries a different Fixes: t...
In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (atomic) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic (polling) path rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle for this i2c controller. Reading I2DR to obtain the count likewise arms the next byte on the count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly and left the bus held. Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so the existing last-byte handling emits STOP; the dummy byte is discarded. A count of 0 is a valid empty block read; a count above I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus has been released. The interrupt-driven path has the same flaw from a later commit and is fixed separately, as it carries a different Fixes:
In the Linux kernel, the following vulnerability has been resolved: i ...
In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (atomic) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic (polling) path rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle for this i2c controller. Reading I2DR to obtain the count likewise arms the next byte on the count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly and left the bus held. Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so the existing last-byte handling emits STOP; the dummy byte is discarded. A count of 0 is a valid empty block read; a count above I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus has been released. The interrupt-driven path has the same flaw from a later commit and is fixed separately, as it carries a different Fix...
EPSS
5.5 Medium
CVSS3