Описание
In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Validate the ITT reflected in a Reject PDU
A Reject PDU carries a copy of the header it rejects, and
iscsi_handle_reject() takes the ITT out of that copy to find the task to
clean up:
memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr));
...
task = iscsi_itt_to_task(conn, rejected_pdu.itt);
That value is whatever the target put there. iscsi_itt_to_task() bounds
the index against cmds_max and checks nothing else, so any task in the
pool can be named, and iscsi_nop_out_rsp() then completes it.
An index that has never been used gives a NULL task->conn: the pool is
zeroed at session setup and conn is assigned only when a task is
allocated. If the task was used and returned, iscsi_complete_task() hits
its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount
underflows. An in-flight SCSI command is completed as successful - a 1
MiB read returned 1048576 with none of its buffer written and no
warning.
Validate the reflected ITT the way iscsi_itt_to_ctask() validates a
command ITT, and require the task to be in flight and not a SCSI
command.
[ 6.248477] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI
[ 6.249357] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
[ 6.249951] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy)
[ 6.250718] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 6.251616] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160
[ 6.252043] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00
[ 6.252813] RSP: 0018:ffff88806c907b80 EFLAGS: 00010206
[ 6.253042] RAX: dffffc0000000000 RBX: ffff88800607e000 RCX: ffffffff8d571a25
[ 6.253345] RDX: 000000000000000c RSI: ffff88806c907c38 RDI: 0000000000000060
[ 6.253642] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff235a504
[ 6.253947] R10: 0000000000000003 R11: 7463656e6e6f6320 R12: 0000000000000000
[ 6.254251] R13: 0000000000000000 R14: ffff88806c907c38 R15: 0000000000000000
[ 6.254549] FS: 0000000000000000(0000) GS:ffff8880d95bc000(0000) knlGS:0000000000000000
[ 6.254887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.255140] CR2: 00007fc393e8ffc0 CR3: 0000000005252006 CR4: 0000000000770ef0
[ 6.255439] PKRU: 55555554
[ 6.255564] Call Trace:
[ 6.255674]
[ 6.255768] __iscsi_complete_pdu+0x18bf/0x22a0
[ 6.256733] iscsi_complete_pdu+0x54/0xa0
[ 6.256905] iscsi_tcp_data_recv_done+0xf4/0x250
[ 6.257103] iscsi_tcp_recv_skb+0x31e/0xec0
[ 6.257680] iscsi_sw_tcp_recv+0x12f/0x390
[ 6.258061] __tcp_read_sock+0x1ab/0x810
[ 6.258853] iscsi_sw_tcp_data_ready+0x18b/0x510
[ 6.259808] tcp_data_queue+0x1f13/0x4cd0
[ 6.260567] tcp_rcv_established+0x8a5/0x3a00
[ 6.261931] tcp_v4_do_rcv+0x449/0x960
[ 6.262269] tcp_v4_rcv+0x2245/0x3bc0
A flaw was found in the Linux kernel's SCSI subsystem within the libiscsi module. A malicious or compromised iSCSI storage target can trigger a denial of service (DoS) or data integrity issues by sending a crafted Reject Protocol Data Unit (PDU) containing an unvalidated Initiator Task Tag (ITT). Because the kernel fails to verify that the reflected task identifier corresponds to a valid in-flight request, it may attempt to process an uninitialized or freed task. This improper handling leads to a null-pointer dereference and a kernel crash, or causes read operations to complete without receiving actual data.
Отчет
This vulnerability is rated as Important severity because an untrusted or compromised storage target can remotely induce a host kernel panic or corrupt data over the network without requiring prior local credentials. Red Hat Enterprise Linux systems are only vulnerable if configured as an iSCSI initiator and actively connected to a malicious or rogue target node. Because iSCSI initiator connectivity is not enabled or established by default on standard installations, exposure is limited to hosts utilizing networked iSCSI storage.
Затронутые пакеты
| Платформа | Пакет | Состояние | Рекомендация | Релиз |
|---|---|---|---|---|
| Red Hat Enterprise Linux 10 | kernel | Affected | ||
| Red Hat Enterprise Linux 6 | kernel | Affected | ||
| Red Hat Enterprise Linux 7 | kernel | Affected | ||
| Red Hat Enterprise Linux 7 | kernel-rt | Affected | ||
| Red Hat Enterprise Linux 8 | kernel | Affected | ||
| Red Hat Enterprise Linux 8 | kernel-rt | Affected | ||
| Red Hat Enterprise Linux 9 | kernel | Affected | ||
| Red Hat Enterprise Linux 9 | kernel-rt | Affected | ||
| Red Hat OpenShift Container Platform 4 | openshift/ose-rhel-coreos-8 | Affected | ||
| Red Hat OpenShift Container Platform 4 | openshift/ose-rhel-coreos-9 | Affected |
Показывать по
Ссылки на источники
Дополнительная информация
Статус:
EPSS
7.5 High
CVSS3
Связанные уязвимости
In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the ITT reflected in a Reject PDU A Reject PDU carries a copy of the header it rejects, and iscsi_handle_reject() takes the ITT out of that copy to find the task to clean up: memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); ... task = iscsi_itt_to_task(conn, rejected_pdu.itt); That value is whatever the target put there. iscsi_itt_to_task() bounds the index against cmds_max and checks nothing else, so any task in the pool can be named, and iscsi_nop_out_rsp() then completes it. An index that has never been used gives a NULL task->conn: the pool is zeroed at session setup and conn is assigned only when a task is allocated. If the task was used and returned, iscsi_complete_task() hits its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount underflows. An in-flight SCSI command is completed as successful - a 1 MiB read returned 1048576 with none of its buffer written and no warn...
In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the ITT reflected in a Reject PDU A Reject PDU carries a copy of the header it rejects, and iscsi_handle_reject() takes the ITT out of that copy to find the task to clean up: memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); ... task = iscsi_itt_to_task(conn, rejected_pdu.itt); That value is whatever the target put there. iscsi_itt_to_task() bounds the index against cmds_max and checks nothing else, so any task in the pool can be named, and iscsi_nop_out_rsp() then completes it. An index that has never been used gives a NULL task->conn: the pool is zeroed at session setup and conn is assigned only when a task is allocated. If the task was used and returned, iscsi_complete_task() hits its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount underflows. An in-flight SCSI command is completed as successful - a 1 MiB read returned 1048576 with none of its buffer
In the Linux kernel, the following vulnerability has been resolved: s ...
In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the ITT reflected in a Reject PDU A Reject PDU carries a copy of the header it rejects, and iscsi_handle_reject() takes the ITT out of that copy to find the task to clean up: memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); ... task = iscsi_itt_to_task(conn, rejected_pdu.itt); That value is whatever the target put there. iscsi_itt_to_task() bounds the index against cmds_max and checks nothing else, so any task in the pool can be named, and iscsi_nop_out_rsp() then completes it. An index that has never been used gives a NULL task->conn: the pool is zeroed at session setup and conn is assigned only when a task is allocated. If the task was used and returned, iscsi_complete_task() hits its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount underflows. An in-flight SCSI command is completed as successful - a 1 MiB read returned 1048576 with none of its buf...
EPSS
7.5 High
CVSS3