Описание
In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Fix bounce buffer overflow
High-speed devices with out of spec 1024 byte bulk endpoints exist and
are allowed by USB core, but xhci-hcd always sets packet size to 512.
The exact nature of these devices isn't documented, commit fb5ee84ea72c
("USB: Accept bulk endpoints with 1024-byte maxpacket") only states
that they "don't work with xHCI host controllers", whatever it means.
But somebody (or a malicious device) can try, and then the driver will
allocate a 512 byte bounce buffer for this endpoint and may write up to
1024 bytes into it if particular scatter-gather URBs are used, because
xhci_align_td() obtains packet size from the descriptor. Fix this.
As a side effect, TRBs will be aligned to the packet size chosen by the
driver on all endpoints of all speeds. Alignment serves the xHC, not
device, so this is fine. Only out of spec devices are affected anyway.
A flaw was found in the Linux kernel's USB eXtensible Host Controller Interface (xHCI) driver. An attacker with physical access could connect a malicious USB device configured with out-of-specification endpoint sizes to trigger a buffer overflow during data transfer operations. This issue occurs because the driver allocates a smaller bounce buffer than indicated by the device descriptor, leading to memory corruption. A successful exploit could result in a system crash, causing a Denial of Service (DoS), or potentially allow arbitrary code execution.
Отчет
This vulnerability is rated as Moderate severity because exploitation requires physical access to attach a malicious or non-compliant USB peripheral, or access to pass through an emulated device in virtualized environments. While an out-of-spec endpoint descriptor can trigger memory corruption within the kernel host controller subsystem resulting in a crash or privilege escalation, the prerequisite of local hardware or hypervisor access significantly limits exposure for standard server deployments.
Затронутые пакеты
| Платформа | Пакет | Состояние | Рекомендация | Релиз |
|---|---|---|---|---|
| Red Hat Enterprise Linux 10 | kernel | Fix deferred | ||
| Red Hat Enterprise Linux 6 | kernel | Out of support scope | ||
| Red Hat Enterprise Linux 7 | kernel | Fix deferred | ||
| Red Hat Enterprise Linux 7 | kernel-rt | Fix deferred | ||
| Red Hat Enterprise Linux 8 | kernel | Fix deferred | ||
| Red Hat Enterprise Linux 8 | kernel-rt | Fix deferred | ||
| Red Hat Enterprise Linux 9 | kernel | Fix deferred | ||
| Red Hat Enterprise Linux 9 | kernel-rt | Fix deferred | ||
| Red Hat OpenShift Container Platform 4 | openshift/ose-rhel-coreos-8 | Fix deferred | ||
| Red Hat OpenShift Container Platform 4 | openshift/ose-rhel-coreos-9 | Fix deferred |
Показывать по
Ссылки на источники
Дополнительная информация
Статус:
EPSS
6.8 Medium
CVSS3
Связанные уязвимости
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix bounce buffer overflow High-speed devices with out of spec 1024 byte bulk endpoints exist and are allowed by USB core, but xhci-hcd always sets packet size to 512. The exact nature of these devices isn't documented, commit fb5ee84ea72c ("USB: Accept bulk endpoints with 1024-byte maxpacket") only states that they "don't work with xHCI host controllers", whatever it means. But somebody (or a malicious device) can try, and then the driver will allocate a 512 byte bounce buffer for this endpoint and may write up to 1024 bytes into it if particular scatter-gather URBs are used, because xhci_align_td() obtains packet size from the descriptor. Fix this. As a side effect, TRBs will be aligned to the packet size chosen by the driver on all endpoints of all speeds. Alignment serves the xHC, not device, so this is fine. Only out of spec devices are affected anyway.
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix bounce buffer overflow High-speed devices with out of spec 1024 byte bulk endpoints exist and are allowed by USB core, but xhci-hcd always sets packet size to 512. The exact nature of these devices isn't documented, commit fb5ee84ea72c ("USB: Accept bulk endpoints with 1024-byte maxpacket") only states that they "don't work with xHCI host controllers", whatever it means. But somebody (or a malicious device) can try, and then the driver will allocate a 512 byte bounce buffer for this endpoint and may write up to 1024 bytes into it if particular scatter-gather URBs are used, because xhci_align_td() obtains packet size from the descriptor. Fix this. As a side effect, TRBs will be aligned to the packet size chosen by the driver on all endpoints of all speeds. Alignment serves the xHC, not device, so this is fine. Only out of spec devices are affected anyway.
In the Linux kernel, the following vulnerability has been resolved: u ...
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix bounce buffer overflow High-speed devices with out of spec 1024 byte bulk endpoints exist and are allowed by USB core, but xhci-hcd always sets packet size to 512. The exact nature of these devices isn't documented, commit fb5ee84ea72c ("USB: Accept bulk endpoints with 1024-byte maxpacket") only states that they "don't work with xHCI host controllers", whatever it means. But somebody (or a malicious device) can try, and then the driver will allocate a 512 byte bounce buffer for this endpoint and may write up to 1024 bytes into it if particular scatter-gather URBs are used, because xhci_align_td() obtains packet size from the descriptor. Fix this. As a side effect, TRBs will be aligned to the packet size chosen by the driver on all endpoints of all speeds. Alignment serves the xHC, not device, so this is fine. Only out of spec devices are affected anyway.
EPSS
6.8 Medium
CVSS3