SUSE-SU-2025:02923-1

Описание

TSX Asynchronous Abort condition on some CPUs utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2019-11135.html
  CVE-2019-11135
• https://bugzilla.suse.com/1139073
  SUSE Bug 1139073
• https://bugzilla.suse.com/1152497
  SUSE Bug 1152497
• https://bugzilla.suse.com/1152505
  SUSE Bug 1152505
• https://bugzilla.suse.com/1152506
  SUSE Bug 1152506
• https://bugzilla.suse.com/1160120
  SUSE Bug 1160120
• https://bugzilla.suse.com/1201877
  SUSE Bug 1201877

Описание

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Only free buffer VA that is not NULL In the MediaTek vcodec driver, while mtk_vcodec_mem_free() is mostly called only when the buffer to free exists, there are some instances that didn't do the check and triggered warnings in practice. We believe those checks were forgotten unintentionally. Add the checks back to fix the warnings.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2023-52888.html
  CVE-2023-52888
• https://bugzilla.suse.com/1228557
  SUSE Bug 1228557

Описание

In the Linux kernel, the following vulnerability has been resolved: media: dw2102: Fix null-ptr-deref in dw2102_i2c_transfer() In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach dw2102_i2c_transfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 950e252cb469 ("[media] dw2102: limit messages to buffer size")

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2023-53146.html
  CVE-2023-53146
• https://bugzilla.suse.com/1220112
  SUSE Bug 1220112

Описание

In the Linux kernel, the following vulnerability has been resolved: net/handshake: Fix handshake_req_destroy_test1 Recently, handshake_req_destroy_test1 started failing: Expected handshake_req_destroy_test == req, but handshake_req_destroy_test == 0000000000000000 req == 0000000060f99b40 not ok 11 req_destroy works This is because "sock_release(sock)" was replaced with "fput(filp)" to address a memory leak. Note that sock_release() is synchronous but fput() usually delays the final close and clean-up. The delay is not consequential in the other cases that were changed but handshake_req_destroy_test1 is testing that handshake_req_cancel() followed by closing the file actually does call the ->hp_destroy method. Thus the PTR_EQ test at the end has to be sure that the final close is complete before it checks the pointer. We cannot use a completion here because if ->hp_destroy is never called (ie, there is an API bug) then the test will hang. Reported by: Guenter Roeck <linux@roeck-us.net>

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-26831.html
  CVE-2024-26831
• https://bugzilla.suse.com/1223008
  SUSE Bug 1223008

Описание

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio() When I did memory failure tests recently, below warning occurs: DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 8 PID: 1011 at kernel/locking/lockdep.c:232 __lock_acquire+0xccb/0x1ca0 Modules linked in: mce_inject hwpoison_inject CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:__lock_acquire+0xccb/0x1ca0 RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082 RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0 RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10 R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004 FS: 00007ff9f32aa740(0000) GS:ffffa1ce5fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff9f3134ba0 CR3: 00000008484e4000 CR4: 00000000000006f0 Call Trace: <TASK> lock_acquire+0xbe/0x2d0 _raw_spin_lock_irqsave+0x3a/0x60 hugepage_subpool_put_pages.part.0+0xe/0xc0 free_huge_folio+0x253/0x3f0 dissolve_free_huge_page+0x147/0x210 __page_handle_poison+0x9/0x70 memory_failure+0x4e6/0x8c0 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x380/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xbc/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff9f3114887 RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887 RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001 RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00 </TASK> Kernel panic - not syncing: kernel: panic_on_warn set ... CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> panic+0x326/0x350 check_panic_on_warn+0x4f/0x50 __warn+0x98/0x190 report_bug+0x18e/0x1a0 handle_bug+0x3d/0x70 exc_invalid_op+0x18/0x70 asm_exc_invalid_op+0x1a/0x20 RIP: 0010:__lock_acquire+0xccb/0x1ca0 RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082 RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0 RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10 R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004 lock_acquire+0xbe/0x2d0 _raw_spin_lock_irqsave+0x3a/0x60 hugepage_subpool_put_pages.part.0+0xe/0xc0 free_huge_folio+0x253/0x3f0 dissolve_free_huge_page+0x147/0x210 __page_handle_poison+0x9/0x70 memory_failure+0x4e6/0x8c0 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x380/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xbc/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff9f3114887 RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887 RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001 RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00 </TASK> After git bisecting and digging into the code, I believe the root cause is that _deferred_list field of folio is unioned with _hugetlb_subpool field. In __update_and_free_hugetlb_folio(), folio->_deferred_ ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-36028.html
  CVE-2024-36028
• https://bugzilla.suse.com/1225707
  SUSE Bug 1225707

Описание

A transient execution vulnerability in some AMD processors may allow a user process to infer the control registers speculatively even if UMIP feature is enabled, potentially resulting in information leakage.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-36348.html
  CVE-2024-36348
• https://bugzilla.suse.com/1238896
  SUSE Bug 1238896

Описание

A transient execution vulnerability in some AMD processors may allow a user process to infer TSC_AUX even when such a read is disabled, potentially resulting in information leakage.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-36349.html
  CVE-2024-36349
• https://bugzilla.suse.com/1238896
  SUSE Bug 1238896

Описание

A transient execution vulnerability in some AMD processors may allow an attacker to infer data from previous stores, potentially resulting in the leakage of privileged information.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-36350.html
  CVE-2024-36350
• https://bugzilla.suse.com/1238896
  SUSE Bug 1238896

Описание

A transient execution vulnerability in some AMD processors may allow an attacker to infer data in the L1D cache, potentially resulting in the leakage of sensitive information across privileged boundaries.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-36357.html
  CVE-2024-36357
• https://bugzilla.suse.com/1238896
  SUSE Bug 1238896

Описание

In the Linux kernel, the following vulnerability has been resolved: perf: Fix event leak upon exec and file release The perf pending task work is never waited upon the matching event release. In the case of a child event, released via free_event() directly, this can potentially result in a leaked event, such as in the following scenario that doesn't even require a weak IRQ work implementation to trigger: schedule() prepare_task_switch() =======> <NMI> perf_event_overflow() event->pending_sigtrap = ... irq_work_queue(&event->pending_irq) <======= </NMI> perf_event_task_sched_out() event_sched_out() event->pending_sigtrap = 0; atomic_long_inc_not_zero(&event->refcount) task_work_add(&event->pending_task) finish_lock_switch() =======> <IRQ> perf_pending_irq() //do nothing, rely on pending task work <======= </IRQ> begin_new_exec() perf_event_exit_task() perf_event_exit_event() // If is child event free_event() WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1) // event is leaked Similar scenarios can also happen with perf_event_remove_on_exec() or simply against concurrent perf_event_release(). Fix this with synchonizing against the possibly remaining pending task work while freeing the event, just like is done with remaining pending IRQ work. This means that the pending task callback neither need nor should hold a reference to the event, preventing it from ever beeing freed.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-43869.html
  CVE-2024-43869
• https://bugzilla.suse.com/1229491
  SUSE Bug 1229491

Описание

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not BUG_ON() when freeing tree block after error When freeing a tree block, at btrfs_free_tree_block(), if we fail to create a delayed reference we don't deal with the error and just do a BUG_ON(). The error most likely to happen is -ENOMEM, and we have a comment mentioning that only -ENOMEM can happen, but that is not true, because in case qgroups are enabled any error returned from btrfs_qgroup_trace_extent_post() (can be -EUCLEAN or anything returned from btrfs_search_slot() for example) can be propagated back to btrfs_free_tree_block(). So stop doing a BUG_ON() and return the error to the callers and make them abort the transaction to prevent leaking space. Syzbot was triggering this, likely due to memory allocation failure injection.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-44963.html
  CVE-2024-44963
• https://bugzilla.suse.com/1230216
  SUSE Bug 1230216

Описание

In the Linux kernel, the following vulnerability has been resolved: net/smc: check v2_ext_offset/eid_cnt/ism_gid_cnt when receiving proposal msg When receiving proposal msg in server, the fields v2_ext_offset/ eid_cnt/ism_gid_cnt in proposal msg are from the remote client and can not be fully trusted. Especially the field v2_ext_offset, once exceed the max value, there has the chance to access wrong address, and crash may happen. This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt before using them.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-49568.html
  CVE-2024-49568
• https://bugzilla.suse.com/1235728
  SUSE Bug 1235728

Описание

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix helper writes to read-only maps Lonial found an issue that despite user- and BPF-side frozen BPF map (like in case of .rodata), it was still possible to write into it from a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT} as arguments. In check_func_arg() when the argument is as mentioned, the meta->raw_mode is never set. Later, check_helper_mem_access(), under the case of PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the subsequent call to check_map_access_type() and given the BPF map is read-only it succeeds. The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT when results are written into them as opposed to read out of them. The latter indicates that it's okay to pass a pointer to uninitialized memory as the memory is written to anyway. However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM just with additional alignment requirement. So it is better to just get rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the fixed size memory types. For this, add MEM_ALIGNED to additionally ensure alignment given these helpers write directly into the args via *<ptr> = val. The .arg*_size has been initialized reflecting the actual sizeof(*<ptr>). MEM_ALIGNED can only be used in combination with MEM_FIXED_SIZE annotated argument types, since in !MEM_FIXED_SIZE cases the verifier does not know the buffer size a priori and therefore cannot blindly write *<ptr> = val.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-49861.html
  CVE-2024-49861
• https://bugzilla.suse.com/1232254
  SUSE Bug 1232254

Описание

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix race between laundromat and free_stateid There is a race between laundromat handling of revoked delegations and a client sending free_stateid operation. Laundromat thread finds that delegation has expired and needs to be revoked so it marks the delegation stid revoked and it puts it on a reaper list but then it unlock the state lock and the actual delegation revocation happens without the lock. Once the stid is marked revoked a racing free_stateid processing thread does the following (1) it calls list_del_init() which removes it from the reaper list and (2) frees the delegation stid structure. The laundromat thread ends up not calling the revoke_delegation() function for this particular delegation but that means it will no release the lock lease that exists on the file. Now, a new open for this file comes in and ends up finding that lease list isn't empty and calls nfsd_breaker_owns_lease() which ends up trying to derefence a freed delegation stateid. Leading to the followint use-after-free KASAN warning: kernel: ================================================================== kernel: BUG: KASAN: slab-use-after-free in nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: Read of size 8 at addr ffff0000e73cd0c8 by task nfsd/6205 kernel: kernel: CPU: 2 UID: 0 PID: 6205 Comm: nfsd Kdump: loaded Not tainted 6.11.0-rc7+ #9 kernel: Hardware name: Apple Inc. Apple Virtualization Generic Platform, BIOS 2069.0.0.0.0 08/03/2024 kernel: Call trace: kernel: dump_backtrace+0x98/0x120 kernel: show_stack+0x1c/0x30 kernel: dump_stack_lvl+0x80/0xe8 kernel: print_address_description.constprop.0+0x84/0x390 kernel: print_report+0xa4/0x268 kernel: kasan_report+0xb4/0xf8 kernel: __asan_report_load8_noabort+0x1c/0x28 kernel: nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: nfsd_file_do_acquire+0xb3c/0x11d0 [nfsd] kernel: nfsd_file_acquire_opened+0x84/0x110 [nfsd] kernel: nfs4_get_vfs_file+0x634/0x958 [nfsd] kernel: nfsd4_process_open2+0xa40/0x1a40 [nfsd] kernel: nfsd4_open+0xa08/0xe80 [nfsd] kernel: nfsd4_proc_compound+0xb8c/0x2130 [nfsd] kernel: nfsd_dispatch+0x22c/0x718 [nfsd] kernel: svc_process_common+0x8e8/0x1960 [sunrpc] kernel: svc_process+0x3d4/0x7e0 [sunrpc] kernel: svc_handle_xprt+0x828/0xe10 [sunrpc] kernel: svc_recv+0x2cc/0x6a8 [sunrpc] kernel: nfsd+0x270/0x400 [nfsd] kernel: kthread+0x288/0x310 kernel: ret_from_fork+0x10/0x20 This patch proposes a fixed that's based on adding 2 new additional stid's sc_status values that help coordinate between the laundromat and other operations (nfsd4_free_stateid() and nfsd4_delegreturn()). First to make sure, that once the stid is marked revoked, it is not removed by the nfsd4_free_stateid(), the laundromat take a reference on the stateid. Then, coordinating whether the stid has been put on the cl_revoked list or we are processing FREE_STATEID and need to make sure to remove it from the list, each check that state and act accordingly. If laundromat has added to the cl_revoke list before the arrival of FREE_STATEID, then nfsd4_free_stateid() knows to remove it from the list. If nfsd4_free_stateid() finds that operations arrived before laundromat has placed it on cl_revoke list, it marks the state freed and then laundromat will no longer add it to the list. Also, for nfsd4_delegreturn() when looking for the specified stid, we need to access stid that are marked removed or freeable, it means the laundromat has started processing it but hasn't finished and this delegreturn needs to return nfserr_deleg_revoked and not nfserr_bad_stateid. The latter will not trigger a FREE_STATEID and the lack of it will leave this stid on the cl_revoked list indefinitely.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-50106.html
  CVE-2024-50106
• https://bugzilla.suse.com/1232882
  SUSE Bug 1232882

Описание

In the Linux kernel, the following vulnerability has been resolved: sched/numa: fix memory leak due to the overwritten vma->numab_state [Problem Description] When running the hackbench program of LTP, the following memory leak is reported by kmemleak. # /opt/ltp/testcases/bin/hackbench 20 thread 1000 Running with 20*40 (== 800) tasks. # dmesg | grep kmemleak ... kmemleak: 480 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 665 new suspected memory leaks (see /sys/kernel/debug/kmemleak) # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff888cd8ca2c40 (size 64): comm "hackbench", pid 17142, jiffies 4299780315 hex dump (first 32 bytes): ac 74 49 00 01 00 00 00 4c 84 49 00 01 00 00 00 .tI.....L.I..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc bff18fd4): [<ffffffff81419a89>] __kmalloc_cache_noprof+0x2f9/0x3f0 [<ffffffff8113f715>] task_numa_work+0x725/0xa00 [<ffffffff8110f878>] task_work_run+0x58/0x90 [<ffffffff81ddd9f8>] syscall_exit_to_user_mode+0x1c8/0x1e0 [<ffffffff81dd78d5>] do_syscall_64+0x85/0x150 [<ffffffff81e0012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e ... This issue can be consistently reproduced on three different servers: * a 448-core server * a 256-core server * a 192-core server [Root Cause] Since multiple threads are created by the hackbench program (along with the command argument 'thread'), a shared vma might be accessed by two or more cores simultaneously. When two or more cores observe that vma->numab_state is NULL at the same time, vma->numab_state will be overwritten. Although current code ensures that only one thread scans the VMAs in a single 'numa_scan_period', there might be a chance for another thread to enter in the next 'numa_scan_period' while we have not gotten till numab_state allocation [1]. Note that the command `/opt/ltp/testcases/bin/hackbench 50 process 1000` cannot the reproduce the issue. It is verified with 200+ test runs. [Solution] Use the cmpxchg atomic operation to ensure that only one thread executes the vma->numab_state assignment. [1] https://lore.kernel.org/lkml/1794be3c-358c-4cdc-a43d-a1f841d91ef7@amd.com/

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-56613.html
  CVE-2024-56613
• https://bugzilla.suse.com/1244176
  SUSE Bug 1244176

Описание

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix potential double remove of hotplug slot In commit 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the device") the zpci_exit_slot() was moved from zpci_device_reserved() to zpci_release_device() with the intention of keeping the hotplug slot around until the device is actually removed. Now zpci_release_device() is only called once all references are dropped. Since the zPCI subsystem only drops its reference once the device is in the reserved state it follows that zpci_release_device() must only deal with devices in the reserved state. Despite that it contains code to tear down from both configured and standby state. For the standby case this already includes the removal of the hotplug slot so would cause a double removal if a device was ever removed in either configured or standby state. Instead of causing a potential double removal in a case that should never happen explicitly WARN_ON() if a device in non-reserved state is released and get rid of the dead code cases.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-56699.html
  CVE-2024-56699
• https://bugzilla.suse.com/1235490
  SUSE Bug 1235490

Описание

In the Linux kernel, the following vulnerability has been resolved: vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages() Fix an unwind issue in mlx5vf_add_migration_pages(). If a set of pages is allocated but fails to be added to the SG table, they need to be freed to prevent a memory leak. Any pages successfully added to the SG table will be freed as part of mlx5vf_free_data_buffer().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-56742.html
  CVE-2024-56742
• https://bugzilla.suse.com/1235613
  SUSE Bug 1235613

Описание

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_set_pipapo: fix initial map fill The initial buffer has to be inited to all-ones, but it must restrict it to the size of the first field, not the total field size. After each round in the map search step, the result and the fill map are swapped, so if we have a set where f->bsize of the first element is smaller than m->bsize_max, those one-bits are leaked into future rounds result map. This makes pipapo find an incorrect matching results for sets where first field size is not the largest. Followup patch adds a test case to nft_concat_range.sh selftest script. Thanks to Stefano Brivio for pointing out that we need to zero out the remainder explicitly, only correcting memset() argument isn't enough.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-57947.html
  CVE-2024-57947
• https://bugzilla.suse.com/1236333
  SUSE Bug 1236333
• https://bugzilla.suse.com/1245799
  SUSE Bug 1245799

Описание

In the Linux kernel, the following vulnerability has been resolved: xfrm: state: fix out-of-bounds read during lookup lookup and resize can run in parallel. The xfrm_state_hash_generation seqlock ensures a retry, but the hash functions can observe a hmask value that is too large for the new hlist array. rehash does: rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..] net->xfrm.state_hmask = nhashmask; While state lookup does: h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family); hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) { This is only safe in case the update to state_bydst is larger than net->xfrm.xfrm_state_hmask (or if the lookup function gets serialized via state spinlock again). Fix this by prefetching state_hmask and the associated pointers. The xfrm_state_hash_generation seqlock retry will ensure that the pointer and the hmask will be consistent. The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side, add lockdep assertions to document that they are only safe for insert side. xfrm_state_lookup_byaddr() uses the spinlock rather than RCU. AFAICS this is an oversight from back when state lookup was converted to RCU, this lock should be replaced with RCU in a future patch.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-57982.html
  CVE-2024-57982
• https://bugzilla.suse.com/1237913
  SUSE Bug 1237913

Описание

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix handling of received connection abort Fix the handling of a connection abort that we've received. Though the abort is at the connection level, it needs propagating to the calls on that connection. Whilst the propagation bit is performed, the calls aren't then woken up to go and process their termination, and as no further input is forthcoming, they just hang. Also add some tracing for the logging of connection aborts.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-58053.html
  CVE-2024-58053
• https://bugzilla.suse.com/1238982
  SUSE Bug 1238982

Описание

In the Linux kernel, the following vulnerability has been resolved: bpf: track changes_pkt_data property for global functions When processing calls to certain helpers, verifier invalidates all packet pointers in a current state. For example, consider the following program: __attribute__((__noinline__)) long skb_pull_data(struct __sk_buff *sk, __u32 len) { return bpf_skb_pull_data(sk, len); } SEC("tc") int test_invalidate_checks(struct __sk_buff *sk) { int *p = (void *)(long)sk->data; if ((void *)(p + 1) > (void *)(long)sk->data_end) return TCX_DROP; skb_pull_data(sk, 0); *p = 42; return TCX_PASS; } After a call to bpf_skb_pull_data() the pointer 'p' can't be used safely. See function filter.c:bpf_helper_changes_pkt_data() for a list of such helpers. At the moment verifier invalidates packet pointers when processing helper function calls, and does not traverse global sub-programs when processing calls to global sub-programs. This means that calls to helpers done from global sub-programs do not invalidate pointers in the caller state. E.g. the program above is unsafe, but is not rejected by verifier. This commit fixes the omission by computing field bpf_subprog_info->changes_pkt_data for each sub-program before main verification pass. changes_pkt_data should be set if: - subprogram calls helper for which bpf_helper_changes_pkt_data returns true; - subprogram calls a global function, for which bpf_subprog_info->changes_pkt_data should be set. The verifier.c:check_cfg() pass is modified to compute this information. The commit relies on depth first instruction traversal done by check_cfg() and absence of recursive function calls: - check_cfg() would eventually visit every call to subprogram S in a state when S is fully explored; - when S is fully explored: - every direct helper call within S is explored (and thus changes_pkt_data is set if needed); - every call to subprogram S1 called by S was visited with S1 fully explored (and thus S inherits changes_pkt_data from S1). The downside of such approach is that dead code elimination is not taken into account: if a helper call inside global function is dead because of current configuration, verifier would conservatively assume that the call occurs for the purpose of the changes_pkt_data computation.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-58098.html
  CVE-2024-58098
• https://bugzilla.suse.com/1242565
  SUSE Bug 1242565

Описание

In the Linux kernel, the following vulnerability has been resolved: vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame Andrew and Nikolay reported connectivity issues with Cilium's service load-balancing in case of vmxnet3. If a BPF program for native XDP adds an encapsulation header such as IPIP and transmits the packet out the same interface, then in case of vmxnet3 a corrupted packet is being sent and subsequently dropped on the path. vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp() through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address: page = virt_to_page(xdpf->data); tbi->dma_addr = page_pool_get_dma_addr(page) + VMXNET3_XDP_HEADROOM; dma_sync_single_for_device(&adapter->pdev->dev, tbi->dma_addr, buf_size, DMA_TO_DEVICE); The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP BPF program could have moved xdp->data. While the passed buf_size is correct (xdpf->len), the dma_addr needs to have a dynamic offset which can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data - xdp->data_hard_start.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-58099.html
  CVE-2024-58099
• https://bugzilla.suse.com/1242035
  SUSE Bug 1242035

Описание

In the Linux kernel, the following vulnerability has been resolved: bpf: check changes_pkt_data property for extension programs When processing calls to global sub-programs, verifier decides whether to invalidate all packet pointers in current state depending on the changes_pkt_data property of the global sub-program. Because of this, an extension program replacing a global sub-program must be compatible with changes_pkt_data property of the sub-program being replaced. This commit: - adds changes_pkt_data flag to struct bpf_prog_aux: - this flag is set in check_cfg() for main sub-program; - in jit_subprogs() for other sub-programs; - modifies bpf_check_attach_btf_id() to check changes_pkt_data flag; - moves call to check_attach_btf_id() after the call to check_cfg(), because it needs changes_pkt_data flag to be set: bpf_check: ... ... - check_attach_btf_id resolve_pseudo_ldimm64 resolve_pseudo_ldimm64 --> bpf_prog_is_offloaded bpf_prog_is_offloaded check_cfg check_cfg + check_attach_btf_id ... ... The following fields are set by check_attach_btf_id(): - env->ops - prog->aux->attach_btf_trace - prog->aux->attach_func_name - prog->aux->attach_func_proto - prog->aux->dst_trampoline - prog->aux->mod - prog->aux->saved_dst_attach_type - prog->aux->saved_dst_prog_type - prog->expected_attach_type Neither of these fields are used by resolve_pseudo_ldimm64() or bpf_prog_offload_verifier_prep() (for netronome and netdevsim drivers), so the reordering is safe.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-58100.html
  CVE-2024-58100
• https://bugzilla.suse.com/1242564
  SUSE Bug 1242564

Описание

In the Linux kernel, the following vulnerability has been resolved: bpf: consider that tail calls invalidate packet pointers Tail-called programs could execute any of the helpers that invalidate packet pointers. Hence, conservatively assume that each tail call invalidates packet pointers. Making the change in bpf_helper_changes_pkt_data() automatically makes use of check_cfg() logic that computes 'changes_pkt_data' effect for global sub-programs, such that the following program could be rejected: int tail_call(struct __sk_buff *sk) { bpf_tail_call_static(sk, &jmp_table, 0); return 0; } SEC("tc") int not_safe(struct __sk_buff *sk) { int *p = (void *)(long)sk->data; ... make p valid ... tail_call(sk); *p = 42; /* this is unsafe */ ... } The tc_bpf2bpf.c:subprog_tc() needs change: mark it as a function that can invalidate packet pointers. Otherwise, it can't be freplaced with tailcall_freplace.c:entry_freplace() that does a tail call.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-58237.html
  CVE-2024-58237
• https://bugzilla.suse.com/1242574
  SUSE Bug 1242574

Описание

In the Linux kernel, the following vulnerability has been resolved: net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets The blamed commit disabled hardware offoad of IPv6 packets with extension headers on devices that advertise NETIF_F_IPV6_CSUM, based on the definition of that feature in skbuff.h: * * - %NETIF_F_IPV6_CSUM * - Driver (device) is only able to checksum plain * TCP or UDP packets over IPv6. These are specifically * unencapsulated packets of the form IPv6|TCP or * IPv6|UDP where the Next Header field in the IPv6 * header is either TCP or UDP. IPv6 extension headers * are not supported with this feature. This feature * cannot be set in features for a device with * NETIF_F_HW_CSUM also set. This feature is being * DEPRECATED (see below). The change causes skb_warn_bad_offload to fire for BIG TCP packets. [ 496.310233] WARNING: CPU: 13 PID: 23472 at net/core/dev.c:3129 skb_warn_bad_offload+0xc4/0xe0 [ 496.310297] ? skb_warn_bad_offload+0xc4/0xe0 [ 496.310300] skb_checksum_help+0x129/0x1f0 [ 496.310303] skb_csum_hwoffload_help+0x150/0x1b0 [ 496.310306] validate_xmit_skb+0x159/0x270 [ 496.310309] validate_xmit_skb_list+0x41/0x70 [ 496.310312] sch_direct_xmit+0x5c/0x250 [ 496.310317] __qdisc_run+0x388/0x620 BIG TCP introduced an IPV6_TLV_JUMBO IPv6 extension header to communicate packet length, as this is an IPv6 jumbogram. But, the feature is only enabled on devices that support BIG TCP TSO. The header is only present for PF_PACKET taps like tcpdump, and not transmitted by physical devices. For this specific case of extension headers that are not transmitted, return to the situation before the blamed commit and support hardware offload. ipv6_has_hopopt_jumbo() tests not only whether this header is present, but also that it is the only extension header before a terminal (L4) header.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-21629.html
  CVE-2025-21629
• https://bugzilla.suse.com/1235968
  SUSE Bug 1235968
• https://bugzilla.suse.com/1244722
  SUSE Bug 1244722

Описание

In the Linux kernel, the following vulnerability has been resolved: btrfs: avoid NULL pointer dereference if no valid extent tree [BUG] Syzbot reported a crash with the following call trace: BTRFS info (device loop0): scrub: started on devid 1 BUG: kernel NULL pointer dereference, address: 0000000000000208 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206 Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs] Call Trace: <TASK> scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs] scrub_simple_mirror+0x175/0x260 [btrfs] scrub_stripe+0x5d4/0x6c0 [btrfs] scrub_chunk+0xbb/0x170 [btrfs] scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs] btrfs_scrub_dev+0x240/0x600 [btrfs] btrfs_ioctl+0x1dc8/0x2fa0 [btrfs] ? do_sys_openat2+0xa5/0xf0 __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x4f/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> [CAUSE] The reproducer is using a corrupted image where extent tree root is corrupted, thus forcing to use "rescue=all,ro" mount option to mount the image. Then it triggered a scrub, but since scrub relies on extent tree to find where the data/metadata extents are, scrub_find_fill_first_stripe() relies on an non-empty extent root. But unfortunately scrub_find_fill_first_stripe() doesn't really expect an NULL pointer for extent root, it use extent_root to grab fs_info and triggered a NULL pointer dereference. [FIX] Add an extra check for a valid extent root at the beginning of scrub_find_fill_first_stripe(). The new error path is introduced by 42437a6386ff ("btrfs: introduce mount option rescue=ignorebadroots"), but that's pretty old, and later commit b979547513ff ("btrfs: scrub: introduce helper to find and fill sector info for a scrub_stripe") changed how we do scrub. So for kernels older than 6.6, the fix will need manual backport.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-21658.html
  CVE-2025-21658
• https://bugzilla.suse.com/1236208
  SUSE Bug 1236208

Описание

In the Linux kernel, the following vulnerability has been resolved: xfrm: delete intermediate secpath entry in packet offload mode Packets handled by hardware have added secpath as a way to inform XFRM core code that this path was already handled. That secpath is not needed at all after policy is checked and it is removed later in the stack. However, in the case of IP forwarding is enabled (/proc/sys/net/ipv4/ip_forward), that secpath is not removed and packets which already were handled are reentered to the driver TX path with xfrm_offload set. The following kernel panic is observed in mlx5 in such case: mlx5_core 0000:04:00.0 enp4s0f0np0: Link up mlx5_core 0000:04:00.1 enp4s0f1np1: Link up Initializing XFRM netlink socket IPsec XFRM device driver BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: Oops: 0010 [#1] PREEMPT SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc1-alex #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffb87380003800 EFLAGS: 00010206 RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00 RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010 R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00 R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0 Call Trace: <IRQ> ? show_regs+0x63/0x70 ? __die_body+0x20/0x60 ? __die+0x2b/0x40 ? page_fault_oops+0x15c/0x550 ? do_user_addr_fault+0x3ed/0x870 ? exc_page_fault+0x7f/0x190 ? asm_exc_page_fault+0x27/0x30 mlx5e_ipsec_handle_tx_skb+0xe7/0x2f0 [mlx5_core] mlx5e_xmit+0x58e/0x1980 [mlx5_core] ? __fib_lookup+0x6a/0xb0 dev_hard_start_xmit+0x82/0x1d0 sch_direct_xmit+0xfe/0x390 __dev_queue_xmit+0x6d8/0xee0 ? __fib_lookup+0x6a/0xb0 ? internal_add_timer+0x48/0x70 ? mod_timer+0xe2/0x2b0 neigh_resolve_output+0x115/0x1b0 __neigh_update+0x26a/0xc50 neigh_update+0x14/0x20 arp_process+0x2cb/0x8e0 ? __napi_build_skb+0x5e/0x70 arp_rcv+0x11e/0x1c0 ? dev_gro_receive+0x574/0x820 __netif_receive_skb_list_core+0x1cf/0x1f0 netif_receive_skb_list_internal+0x183/0x2a0 napi_complete_done+0x76/0x1c0 mlx5e_napi_poll+0x234/0x7a0 [mlx5_core] __napi_poll+0x2d/0x1f0 net_rx_action+0x1a6/0x370 ? atomic_notifier_call_chain+0x3b/0x50 ? irq_int_handler+0x15/0x20 [mlx5_core] handle_softirqs+0xb9/0x2f0 ? handle_irq_event+0x44/0x60 irq_exit_rcu+0xdb/0x100 common_interrupt+0x98/0xc0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 RIP: 0010:pv_native_safe_halt+0xb/0x10 Code: 09 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 22 0f 1f 84 00 00 00 00 00 90 eb 07 0f 00 2d 7f e9 36 00 fb 40 00 83 ff 07 77 21 89 ff ff 24 fd 88 3d a1 bd 0f 21 f8 RSP: 0018:ffffffffbe603de8 EFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000f92f46680 RDX: 0000000000000037 RSI: 00000000ffffffff RDI: 00000000000518d4 RBP: ffffffffbe603df0 R08: 000000cd42e4dffb R09: ffffffffbe603d70 R10: 0000004d80d62680 R11: 0000000000000001 R12: ffffffffbe60bf40 R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffbe60aff8 ? default_idle+0x9/0x20 arch_cpu_idle+0x9/0x10 default_idle_call+0x29/0xf0 do_idle+0x1f2/0x240 cpu_startup_entry+0x2c/0x30 rest_init+0xe7/0x100 start_kernel+0x76b/0xb90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xc0/0x110 ? setup_ghcb+0xe/0x130 common_startup_64+0x13e/0x141 </TASK> Modules linked in: esp4_offload esp4 xfrm_interface xfrm6_tunnel tunnel4 tunnel6 xfrm_user xfrm_algo binf ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-21720.html
  CVE-2025-21720
• https://bugzilla.suse.com/1238859
  SUSE Bug 1238859

Описание

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop Move the conditional loading of hardware DR6 with the guest's DR6 value out of the core .vcpu_run() loop to fix a bug where KVM can load hardware with a stale vcpu->arch.dr6. When the guest accesses a DR and host userspace isn't debugging the guest, KVM disables DR interception and loads the guest's values into hardware on VM-Enter and saves them on VM-Exit. This allows the guest to access DRs at will, e.g. so that a sequence of DR accesses to configure a breakpoint only generates one VM-Exit. For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest) and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop. But for DR6, the guest's value doesn't need to be loaded into hardware for KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas VMX requires software to manually load the guest value, and so loading the guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done _inside_ the core run loop. Unfortunately, saving the guest values on VM-Exit is initiated by common x86, again outside of the core run loop. If the guest modifies DR6 (in hardware, when DR interception is disabled), and then the next VM-Exit is a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and clobber the guest's actual value. The bug shows up primarily with nested VMX because KVM handles the VMX preemption timer in the fastpath, and the window between hardware DR6 being modified (in guest context) and DR6 being read by guest software is orders of magnitude larger in a nested setup. E.g. in non-nested, the VMX preemption timer would need to fire precisely between #DB injection and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the window where hardware DR6 is "dirty" extends all the way from L1 writing DR6 to VMRESUME (in L1). L1's view: ========== <L1 disables DR interception> CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0 A: L1 Writes DR6 CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1 B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec D: L1 reads DR6, arch.dr6 = 0 CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0 CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0 L2 reads DR6, L1 disables DR interception CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216 CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0 CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0 L2 detects failure CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT L1 reads DR6 (confirms failure) CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0 L0's view: ========== L2 reads DR6, arch.dr6 = 0 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 L2 => L1 nested VM-Exit CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410. ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-21839.html
  CVE-2025-21839
• https://bugzilla.suse.com/1239061
  SUSE Bug 1239061

Описание

In the Linux kernel, the following vulnerability has been resolved: sockmap, vsock: For connectible sockets allow only connected sockmap expects all vsocks to have a transport assigned, which is expressed in vsock_proto::psock_update_sk_prot(). However, there is an edge case where an unconnected (connectible) socket may lose its previously assigned transport. This is handled with a NULL check in the vsock/BPF recv path. Another design detail is that listening vsocks are not supposed to have any transport assigned at all. Which implies they are not supported by the sockmap. But this is complicated by the fact that a socket, before switching to TCP_LISTEN, may have had some transport assigned during a failed connect() attempt. Hence, we may end up with a listening vsock in a sockmap, which blows up quickly: KASAN: null-ptr-deref in range [0x0000000000000120-0x0000000000000127] CPU: 7 UID: 0 PID: 56 Comm: kworker/7:0 Not tainted 6.14.0-rc1+ Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:vsock_read_skb+0x4b/0x90 Call Trace: sk_psock_verdict_data_ready+0xa4/0x2e0 virtio_transport_recv_pkt+0x1ca8/0x2acc vsock_loopback_work+0x27d/0x3f0 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x35a/0x700 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30 For connectible sockets, instead of relying solely on the state of vsk->transport, tell sockmap to only allow those representing established connections. This aligns with the behaviour for AF_INET and AF_UNIX.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-21854.html
  CVE-2025-21854
• https://bugzilla.suse.com/1239470
  SUSE Bug 1239470

Описание

In the Linux kernel, the following vulnerability has been resolved: net: allow small head cache usage with large MAX_SKB_FRAGS values Sabrina reported the following splat: WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0 Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48 RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6 RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168 R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007 FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> gro_cells_init+0x1ba/0x270 xfrm_input_init+0x4b/0x2a0 xfrm_init+0x38/0x50 ip_rt_init+0x2d7/0x350 ip_init+0xf/0x20 inet_init+0x406/0x590 do_one_initcall+0x9d/0x2e0 do_initcalls+0x23b/0x280 kernel_init_freeable+0x445/0x490 kernel_init+0x20/0x1d0 ret_from_fork+0x46/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> irq event stamp: 584330 hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0 hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0 softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470 softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0 on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024) is smaller than GRO_MAX_HEAD. Such built additionally contains the revert of the single page frag cache so that napi_get_frags() ends up using the page frag allocator, triggering the splat. Note that the underlying issue is independent from the mentioned revert; address it ensuring that the small head cache will fit either TCP and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb() to select kmalloc() usage for any allocation fitting such cache.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-21868.html
  CVE-2025-21868
• https://bugzilla.suse.com/1240180
  SUSE Bug 1240180

Описание

In the Linux kernel, the following vulnerability has been resolved: efi: Don't map the entire mokvar table to determine its size Currently, when validating the mokvar table, we (re)map the entire table on each iteration of the loop, adding space as we discover new entries. If the table grows over a certain size, this fails due to limitations of early_memmap(), and we get a failure and traceback: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220 ... Call Trace: <TASK> ? __early_ioremap+0xef/0x220 ? __warn.cold+0x93/0xfa ? __early_ioremap+0xef/0x220 ? report_bug+0xff/0x140 ? early_fixup_exception+0x5d/0xb0 ? early_idt_handler_common+0x2f/0x3a ? __early_ioremap+0xef/0x220 ? efi_mokvar_table_init+0xce/0x1d0 ? setup_arch+0x864/0xc10 ? start_kernel+0x6b/0xa10 ? x86_64_start_reservations+0x24/0x30 ? x86_64_start_kernel+0xed/0xf0 ? common_startup_64+0x13e/0x141 </TASK> ---[ end trace 0000000000000000 ]--- mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187. Mapping the entire structure isn't actually necessary, as we don't ever need more than one entry header mapped at once. Changes efi_mokvar_table_init() to only map each entry header, not the entire table, when determining the table size. Since we're not mapping any data past the variable name, it also changes the code to enforce that each variable name is NUL terminated, rather than attempting to verify it in place.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-21872.html
  CVE-2025-21872
• https://bugzilla.suse.com/1240323
  SUSE Bug 1240323

Описание

In the Linux kernel, the following vulnerability has been resolved: ftrace: Avoid potential division by zero in function_stat_show() Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64} produce zero and skip stddev computation in that case. For now don't care about rec->counter * rec->counter overflow because rec->time * rec->time overflow will likely happen earlier.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-21898.html
  CVE-2025-21898
• https://bugzilla.suse.com/1240610
  SUSE Bug 1240610

Описание

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix bad hist from corrupting named_triggers list The following commands causes a crash: ~# cd /sys/kernel/tracing/events/rcu/rcu_callback ~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=bad:keys=common_pid' > trigger Because the following occurs: event_trigger_write() { trigger_process_regex() { event_hist_trigger_parse() { data = event_trigger_alloc(..); event_trigger_register(.., data) { cmd_ops->reg(.., data, ..) [hist_register_trigger()] { data->ops->init() [event_hist_trigger_init()] { save_named_trigger(name, data) { list_add(&data->named_list, &named_triggers); } } } } ret = create_actions(); (return -EINVAL) if (ret) goto out_unreg; [..] ret = hist_trigger_enable(data, ...) { list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!) [..] out_unreg: event_hist_unregister(.., data) { cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] { list_for_each_entry(iter, &file->triggers, list) { if (!hist_trigger_match(data, iter, named_data, false)) <- never matches continue; [..] test = iter; } if (test && test->ops->free) <<<-- test is NULL test->ops->free(test) [event_hist_trigger_free()] { [..] if (data->name) del_named_trigger(data) { list_del(&data->named_list); <<<<-- NEVER gets removed! } } } } [..] kfree(data); <<<-- frees item but it is still on list The next time a hist with name is registered, it causes an u-a-f bug and the kernel can crash. Move the code around such that if event_trigger_register() succeeds, the next thing called is hist_trigger_enable() which adds it to the list. A bunch of actions is called if get_named_trigger_data() returns false. But that doesn't need to be called after event_trigger_register(), so it can be moved up, allowing event_trigger_register() to be called just before hist_trigger_enable() keeping them together and allowing the file->triggers to be properly populated.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-21899.html
  CVE-2025-21899
• https://bugzilla.suse.com/1240577
  SUSE Bug 1240577

Описание

In the Linux kernel, the following vulnerability has been resolved: vlan: enforce underlying device type Currently, VLAN devices can be created on top of non-ethernet devices. Besides the fact that it doesn't make much sense, this also causes a bug which leaks the address of a kernel function to usermode. When creating a VLAN device, we initialize GARP (garp_init_applicant) and MRP (mrp_init_applicant) for the underlying device. As part of the initialization process, we add the multicast address of each applicant to the underlying device, by calling dev_mc_add. __dev_mc_add uses dev->addr_len to determine the length of the new multicast address. This causes an out-of-bounds read if dev->addr_len is greater than 6, since the multicast addresses provided by GARP and MRP are only 6 bytes long. This behaviour can be reproduced using the following commands: ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo ip l set up dev gretest ip link add link gretest name vlantest type vlan id 100 Then, the following command will display the address of garp_pdu_rcv: ip maddr show | grep 01:80:c2:00:00:21 Fix the bug by enforcing the type of the underlying device during VLAN device initialization.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-21920.html
  CVE-2025-21920
• https://bugzilla.suse.com/1240686
  SUSE Bug 1240686

Описание

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr If multiple connection requests attempt to create an implicit mptcp endpoint in parallel, more than one caller may end up in mptcp_pm_nl_append_new_local_addr because none found the address in local_addr_list during their call to mptcp_pm_nl_get_local_id. In this case, the concurrent new_local_addr calls may delete the address entry created by the previous caller. These deletes use synchronize_rcu, but this is not permitted in some of the contexts where this function may be called. During packet recv, the caller may be in a rcu read critical section and have preemption disabled. An example stack: BUG: scheduling while atomic: swapper/2/0/0x00000302 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1)) dump_stack (lib/dump_stack.c:124) __schedule_bug (kernel/sched/core.c:5943) schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33 kernel/sched/core.c:5970) __schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207 kernel/sched/features.h:29 kernel/sched/core.c:6621) schedule (arch/x86/include/asm/preempt.h:84 kernel/sched/core.c:6804 kernel/sched/core.c:6818) schedule_timeout (kernel/time/timer.c:2160) wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116 kernel/sched/completion.c:127 kernel/sched/completion.c:148) __wait_rcu_gp (include/linux/rcupdate.h:311 kernel/rcu/update.c:444) synchronize_rcu (kernel/rcu/tree.c:3609) mptcp_pm_nl_append_new_local_addr (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061) mptcp_pm_nl_get_local_id (net/mptcp/pm_netlink.c:1164) mptcp_pm_get_local_id (net/mptcp/pm.c:420) subflow_check_req (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213) subflow_v4_route_req (net/mptcp/subflow.c:305) tcp_conn_request (net/ipv4/tcp_input.c:7216) subflow_v4_conn_request (net/mptcp/subflow.c:651) tcp_rcv_state_process (net/ipv4/tcp_input.c:6709) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2334) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1)) ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234) ip_local_deliver (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254) ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580) ip_sublist_rcv (net/ipv4/ip_input.c:640) ip_list_rcv (net/ipv4/ip_input.c:675) __netif_receive_skb_list_core (net/core/dev.c:5583 net/core/dev.c:5631) netif_receive_skb_list_internal (net/core/dev.c:5685 net/core/dev.c:5774) napi_complete_done (include/linux/list.h:37 include/net/gro.h:449 include/net/gro.h:444 net/core/dev.c:6114) igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb __napi_poll (net/core/dev.c:6582) net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787) handle_softirqs (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636) irq_exit_rcu (kernel/softirq.c:651) common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14)) </IRQ> This problem seems particularly prevalent if the user advertises an endpoint that has a different external vs internal address. In the case where the external address is advertised and multiple connections already exist, multiple subflow SYNs arrive in parallel which tends to trigger the race during creation of the first local_addr_list entries which have the internal address instead. Fix by skipping the replacement of an existing implicit local address if called via mptcp_pm_nl_get_local_id.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-21938.html
  CVE-2025-21938
• https://bugzilla.suse.com/1240723
  SUSE Bug 1240723

Описание

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree() Since commit b36e4523d4d5 ("netfilter: nf_conncount: fix garbage collection confirm race"), `cpu` and `jiffies32` were introduced to the struct nf_conncount_tuple. The commit made nf_conncount_add() initialize `conn->cpu` and `conn->jiffies32` when allocating the struct. In contrast, count_tree() was not changed to initialize them. By commit 34848d5c896e ("netfilter: nf_conncount: Split insert and traversal"), count_tree() was split and the relevant allocation code now resides in insert_tree(). Initialize `conn->cpu` and `conn->jiffies32` in insert_tree(). BUG: KMSAN: uninit-value in find_or_evict net/netfilter/nf_conncount.c:117 [inline] BUG: KMSAN: uninit-value in __nf_conncount_add+0xd9c/0x2850 net/netfilter/nf_conncount.c:143 find_or_evict net/netfilter/nf_conncount.c:117 [inline] __nf_conncount_add+0xd9c/0x2850 net/netfilter/nf_conncount.c:143 count_tree net/netfilter/nf_conncount.c:438 [inline] nf_conncount_count+0x82f/0x1e80 net/netfilter/nf_conncount.c:521 connlimit_mt+0x7f6/0xbd0 net/netfilter/xt_connlimit.c:72 __nft_match_eval net/netfilter/nft_compat.c:403 [inline] nft_match_eval+0x1a5/0x300 net/netfilter/nft_compat.c:433 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x426/0x2290 net/netfilter/nf_tables_core.c:288 nft_do_chain_ipv4+0x1a5/0x230 net/netfilter/nft_chain_filter.c:23 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_slow_list+0x24d/0x860 net/netfilter/core.c:663 NF_HOOK_LIST include/linux/netfilter.h:350 [inline] ip_sublist_rcv+0x17b7/0x17f0 net/ipv4/ip_input.c:633 ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:669 __netif_receive_skb_list_ptype net/core/dev.c:5936 [inline] __netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5983 __netif_receive_skb_list net/core/dev.c:6035 [inline] netif_receive_skb_list_internal+0x1085/0x1700 net/core/dev.c:6126 netif_receive_skb_list+0x5a/0x460 net/core/dev.c:6178 xdp_recv_frames net/bpf/test_run.c:280 [inline] xdp_test_run_batch net/bpf/test_run.c:361 [inline] bpf_test_run_xdp_live+0x2e86/0x3480 net/bpf/test_run.c:390 bpf_prog_test_run_xdp+0xf1d/0x1ae0 net/bpf/test_run.c:1316 bpf_prog_test_run+0x5e5/0xa30 kernel/bpf/syscall.c:4407 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5813 __do_sys_bpf kernel/bpf/syscall.c:5902 [inline] __se_sys_bpf kernel/bpf/syscall.c:5900 [inline] __ia32_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5900 ia32_sys_call+0x394d/0x4180 arch/x86/include/generated/asm/syscalls_32.h:358 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0xb0/0x110 arch/x86/entry/common.c:387 do_fast_syscall_32+0x38/0x80 arch/x86/entry/common.c:412 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:450 entry_SYSENTER_compat_after_hwframe+0x84/0x8e Uninit was created at: slab_post_alloc_hook mm/slub.c:4121 [inline] slab_alloc_node mm/slub.c:4164 [inline] kmem_cache_alloc_noprof+0x915/0xe10 mm/slub.c:4171 insert_tree net/netfilter/nf_conncount.c:372 [inline] count_tree net/netfilter/nf_conncount.c:450 [inline] nf_conncount_count+0x1415/0x1e80 net/netfilter/nf_conncount.c:521 connlimit_mt+0x7f6/0xbd0 net/netfilter/xt_connlimit.c:72 __nft_match_eval net/netfilter/nft_compat.c:403 [inline] nft_match_eval+0x1a5/0x300 net/netfilter/nft_compat.c:433 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x426/0x2290 net/netfilter/nf_tables_core.c:288 nft_do_chain_ipv4+0x1a5/0x230 net/netfilter/nft_chain_filter.c:23 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_slow_list+0x24d/0x860 net/netfilter/core.c:663 NF_HOOK_LIST include/linux/netfilter.h:350 [inline] ip_sublist_rcv+0x17b7/0x17f0 net/ipv4/ip_input.c:633 ip_list_rcv+0x9ef/0xa40 net/ip ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-21959.html
  CVE-2025-21959
• https://bugzilla.suse.com/1240814
  SUSE Bug 1240814

Описание

In the Linux kernel, the following vulnerability has been resolved: xsk: fix an integer overflow in xp_create_and_assign_umem() Since the i and pool->chunk_size variables are of type 'u32', their product can wrap around and then be cast to 'u64'. This can lead to two different XDP buffers pointing to the same memory area. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-21997.html
  CVE-2025-21997
• https://bugzilla.suse.com/1240823
  SUSE Bug 1240823

Описание

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw(). fib_check_nh_v6_gw() expects that fib6_nh_init() cleans up everything when it fails. Commit 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh") moved fib_nh_common_init() before alloc_percpu_gfp() within fib6_nh_init() but forgot to add cleanup for fib6_nh->nh_common.nhc_pcpu_rth_output in case it fails to allocate fib6_nh->rt6i_pcpu, resulting in memleak. Let's call fib_nh_common_release() and clear nhc_pcpu_rth_output in the error path. Note that we can remove the fib6_nh_release() call in nh_create_ipv6() later in net-next.git.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-22005.html
  CVE-2025-22005
• https://bugzilla.suse.com/1240866
  SUSE Bug 1240866

Описание

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free in print_graph_function_flags during tracer switching Kairui reported a UAF issue in print_graph_function_flags() during ftrace stress testing [1]. This issue can be reproduced if puting a 'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(), and executing the following script: $ echo function_graph > current_tracer $ cat trace > /dev/null & $ sleep 5 # Ensure the 'cat' reaches the 'mdelay(10)' point $ echo timerlat > current_tracer The root cause lies in the two calls to print_graph_function_flags within print_trace_line during each s_show(): * One through 'iter->trace->print_line()'; * Another through 'event->funcs->trace()', which is hidden in print_trace_fmt() before print_trace_line returns. Tracer switching only updates the former, while the latter continues to use the print_line function of the old tracer, which in the script above is print_graph_function_flags. Moreover, when switching from the 'function_graph' tracer to the 'timerlat' tracer, s_start only calls graph_trace_close of the 'function_graph' tracer to free 'iter->private', but does not set it to NULL. This provides an opportunity for 'event->funcs->trace()' to use an invalid 'iter->private'. To fix this issue, set 'iter->private' to NULL immediately after freeing it in graph_trace_close(), ensuring that an invalid pointer is not passed to other tracers. Additionally, clean up the unnecessary 'iter->private = NULL' during each 'cat trace' when using wakeup and irqsoff tracers. [1] https://lore.kernel.org/all/20231112150030.84609-1-ryncsn@gmail.com/

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-22035.html
  CVE-2025-22035
• https://bugzilla.suse.com/1241544
  SUSE Bug 1241544

Описание

In the Linux kernel, the following vulnerability has been resolved: ASoC: imx-card: Add NULL check in imx_card_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, imx_card_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-22066.html
  CVE-2025-22066
• https://bugzilla.suse.com/1241340
  SUSE Bug 1241340

Описание

In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: Fix handling of multiple calls to vhost_scsi_set_endpoint If vhost_scsi_set_endpoint is called multiple times without a vhost_scsi_clear_endpoint between them, we can hit multiple bugs found by Haoran Zhang: 1. Use-after-free when no tpgs are found: This fixes a use after free that occurs when vhost_scsi_set_endpoint is called more than once and calls after the first call do not find any tpgs to add to the vs_tpg. When vhost_scsi_set_endpoint first finds tpgs to add to the vs_tpg array match=true, so we will do: vhost_vq_set_backend(vq, vs_tpg); ... kfree(vs->vs_tpg); vs->vs_tpg = vs_tpg; If vhost_scsi_set_endpoint is called again and no tpgs are found match=false so we skip the vhost_vq_set_backend call leaving the pointer to the vs_tpg we then free via: kfree(vs->vs_tpg); vs->vs_tpg = vs_tpg; If a scsi request is then sent we do: vhost_scsi_handle_vq -> vhost_scsi_get_req -> vhost_vq_get_backend which sees the vs_tpg we just did a kfree on. 2. Tpg dir removal hang: This patch fixes an issue where we cannot remove a LIO/target layer tpg (and structs above it like the target) dir due to the refcount dropping to -1. The problem is that if vhost_scsi_set_endpoint detects a tpg is already in the vs->vs_tpg array or if the tpg has been removed so target_depend_item fails, the undepend goto handler will do target_undepend_item on all tpgs in the vs_tpg array dropping their refcount to 0. At this time vs_tpg contains both the tpgs we have added in the current vhost_scsi_set_endpoint call as well as tpgs we added in previous calls which are also in vs->vs_tpg. Later, when vhost_scsi_clear_endpoint runs it will do target_undepend_item on all the tpgs in the vs->vs_tpg which will drop their refcount to -1. Userspace will then not be able to remove the tpg and will hang when it tries to do rmdir on the tpg dir. 3. Tpg leak: This fixes a bug where we can leak tpgs and cause them to be un-removable because the target name is overwritten when vhost_scsi_set_endpoint is called multiple times but with different target names. The bug occurs if a user has called VHOST_SCSI_SET_ENDPOINT and setup a vhost-scsi device to target/tpg mapping, then calls VHOST_SCSI_SET_ENDPOINT again with a new target name that has tpgs we haven't seen before (target1 has tpg1 but target2 has tpg2). When this happens we don't teardown the old target tpg mapping and just overwrite the target name and the vs->vs_tpg array. Later when we do vhost_scsi_clear_endpoint, we are passed in either target1 or target2's name and we will only match that target's tpgs when we loop over the vs->vs_tpg. We will then return from the function without doing target_undepend_item on the tpgs. Because of all these bugs, it looks like being able to call vhost_scsi_set_endpoint multiple times was never supported. The major user, QEMU, already has checks to prevent this use case. So to fix the issues, this patch prevents vhost_scsi_set_endpoint from being called if it's already successfully added tpgs. To add, remove or change the tpg config or target name, you must do a vhost_scsi_clear_endpoint first.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-22083.html
  CVE-2025-22083
• https://bugzilla.suse.com/1241414
  SUSE Bug 1241414

Описание

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Don't expose hw_counters outside of init net namespace Commit 467f432a521a ("RDMA/core: Split port and device counter sysfs attributes") accidentally almost exposed hw counters to non-init net namespaces. It didn't expose them fully, as an attempt to read any of those counters leads to a crash like this one: [42021.807566] BUG: kernel NULL pointer dereference, address: 0000000000000028 [42021.814463] #PF: supervisor read access in kernel mode [42021.819549] #PF: error_code(0x0000) - not-present page [42021.824636] PGD 0 P4D 0 [42021.827145] Oops: 0000 [#1] SMP PTI [42021.830598] CPU: 82 PID: 2843922 Comm: switchto-defaul Kdump: loaded Tainted: G S W I XXX [42021.841697] Hardware name: XXX [42021.849619] RIP: 0010:hw_stat_device_show+0x1e/0x40 [ib_core] [42021.855362] Code: 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 49 89 d0 4c 8b 5e 20 48 8b 8f b8 04 00 00 48 81 c7 f0 fa ff ff <48> 8b 41 28 48 29 ce 48 83 c6 d0 48 c1 ee 04 69 d6 ab aa aa aa 48 [42021.873931] RSP: 0018:ffff97fe90f03da0 EFLAGS: 00010287 [42021.879108] RAX: ffff9406988a8c60 RBX: ffff940e1072d438 RCX: 0000000000000000 [42021.886169] RDX: ffff94085f1aa000 RSI: ffff93c6cbbdbcb0 RDI: ffff940c7517aef0 [42021.893230] RBP: ffff97fe90f03e70 R08: ffff94085f1aa000 R09: 0000000000000000 [42021.900294] R10: ffff94085f1aa000 R11: ffffffffc0775680 R12: ffffffff87ca2530 [42021.907355] R13: ffff940651602840 R14: ffff93c6cbbdbcb0 R15: ffff94085f1aa000 [42021.914418] FS: 00007fda1a3b9700(0000) GS:ffff94453fb80000(0000) knlGS:0000000000000000 [42021.922423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [42021.928130] CR2: 0000000000000028 CR3: 00000042dcfb8003 CR4: 00000000003726f0 [42021.935194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [42021.942257] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [42021.949324] Call Trace: [42021.951756] <TASK> [42021.953842] [<ffffffff86c58674>] ? show_regs+0x64/0x70 [42021.959030] [<ffffffff86c58468>] ? __die+0x78/0xc0 [42021.963874] [<ffffffff86c9ef75>] ? page_fault_oops+0x2b5/0x3b0 [42021.969749] [<ffffffff87674b92>] ? exc_page_fault+0x1a2/0x3c0 [42021.975549] [<ffffffff87801326>] ? asm_exc_page_fault+0x26/0x30 [42021.981517] [<ffffffffc0775680>] ? __pfx_show_hw_stats+0x10/0x10 [ib_core] [42021.988482] [<ffffffffc077564e>] ? hw_stat_device_show+0x1e/0x40 [ib_core] [42021.995438] [<ffffffff86ac7f8e>] dev_attr_show+0x1e/0x50 [42022.000803] [<ffffffff86a3eeb1>] sysfs_kf_seq_show+0x81/0xe0 [42022.006508] [<ffffffff86a11134>] seq_read_iter+0xf4/0x410 [42022.011954] [<ffffffff869f4b2e>] vfs_read+0x16e/0x2f0 [42022.017058] [<ffffffff869f50ee>] ksys_read+0x6e/0xe0 [42022.022073] [<ffffffff8766f1ca>] do_syscall_64+0x6a/0xa0 [42022.027441] [<ffffffff8780013b>] entry_SYSCALL_64_after_hwframe+0x78/0xe2 The problem can be reproduced using the following steps: ip netns add foo ip netns exec foo bash cat /sys/class/infiniband/mlx4_0/hw_counters/* The panic occurs because of casting the device pointer into an ib_device pointer using container_of() in hw_stat_device_show() is wrong and leads to a memory corruption. However the real problem is that hw counters should never been exposed outside of the non-init net namespace. Fix this by saving the index of the corresponding attribute group (it might be 1 or 2 depending on the presence of driver-specific attributes) and zeroing the pointer to hw_counters group for compat devices during the initialization. With this fix applied hw_counters are not available in a non-init net namespace: find /sys/class/infiniband/mlx4_0/ -name hw_counters /sys/class/infiniband/mlx4_0/ports/1/hw_counters /sys/class/infiniband/mlx4_0/ports/2/hw_counters /sys/class/infiniband/mlx4_0/hw_counters ip netns add foo ip netns exec foo bash find /sys/class/infiniband/mlx4_0/ -name hw_counters

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-22089.html
  CVE-2025-22089
• https://bugzilla.suse.com/1241538
  SUSE Bug 1241538

Описание

In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range() If track_pfn_copy() fails, we already added the dst VMA to the maple tree. As fork() fails, we'll cleanup the maple tree, and stumble over the dst VMA for which we neither performed any reservation nor copied any page tables. Consequently untrack_pfn() will see VM_PAT and try obtaining the PAT information from the page table -- which fails because the page table was not copied. The easiest fix would be to simply clear the VM_PAT flag of the dst VMA if track_pfn_copy() fails. However, the whole thing is about "simply" clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy() and performed a reservation, but copying the page tables fails, we'll simply clear the VM_PAT flag, not properly undoing the reservation ... which is also wrong. So let's fix it properly: set the VM_PAT flag only if the reservation succeeded (leaving it clear initially), and undo the reservation if anything goes wrong while copying the page tables: clearing the VM_PAT flag after undoing the reservation. Note that any copied page table entries will get zapped when the VMA will get removed later, after copy_page_range() succeeded; as VM_PAT is not set then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be happy. Note that leaving these page tables in place without a reservation is not a problem, as we are aborting fork(); this process will never run. A reproducer can trigger this usually at the first try: https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110 Modules linked in: ... CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:get_pat_info+0xf6/0x110 ... Call Trace: <TASK> ... untrack_pfn+0x52/0x110 unmap_single_vma+0xa6/0xe0 unmap_vmas+0x105/0x1f0 exit_mmap+0xf6/0x460 __mmput+0x4b/0x120 copy_process+0x1bf6/0x2aa0 kernel_clone+0xab/0x440 __do_sys_clone+0x66/0x90 do_syscall_64+0x95/0x180 Likely this case was missed in: d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed") ... and instead of undoing the reservation we simply cleared the VM_PAT flag. Keep the documentation of these functions in include/linux/pgtable.h, one place is more than sufficient -- we should clean that up for the other functions like track_pfn_remap/untrack_pfn separately.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-22090.html
  CVE-2025-22090
• https://bugzilla.suse.com/1241537
  SUSE Bug 1241537

Описание

In the Linux kernel, the following vulnerability has been resolved: PCI: brcmstb: Fix error path after a call to regulator_bulk_get() If the regulator_bulk_get() returns an error and no regulators are created, we need to set their number to zero. If we don't do this and the PCIe link up fails, a call to the regulator_bulk_free() will result in a kernel panic. While at it, print the error value, as we cannot return an error upwards as the kernel will WARN() on an error from add_bus(). [kwilczynski: commit log, use comma in the message to match style with other similar messages]

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-22095.html
  CVE-2025-22095
• https://bugzilla.suse.com/1241519
  SUSE Bug 1241519

Описание

In the Linux kernel, the following vulnerability has been resolved: net: Remove RTNL dance for SIOCBRADDIF and SIOCBRDELIF. SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to br_ioctl_call(), which causes unnecessary RTNL dance and the splat below [0] under RTNL pressure. Let's say Thread A is trying to detach a device from a bridge and Thread B is trying to remove the bridge. In dev_ioctl(), Thread A bumps the bridge device's refcnt by netdev_hold() and releases RTNL because the following br_ioctl_call() also re-acquires RTNL. In the race window, Thread B could acquire RTNL and try to remove the bridge device. Then, rtnl_unlock() by Thread B will release RTNL and wait for netdev_put() by Thread A. Thread A, however, must hold RTNL after the unlock in dev_ifsioc(), which may take long under RTNL pressure, resulting in the splat by Thread B. Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR) ---------------------- ---------------------- sock_ioctl sock_ioctl `- sock_do_ioctl `- br_ioctl_call `- dev_ioctl `- br_ioctl_stub |- rtnl_lock | |- dev_ifsioc ' ' |- dev = __dev_get_by_name(...) |- netdev_hold(dev, ...) . / |- rtnl_unlock ------. | | |- br_ioctl_call `---> |- rtnl_lock Race | | `- br_ioctl_stub |- br_del_bridge Window | | | |- dev = __dev_get_by_name(...) | | | May take long | `- br_dev_delete(dev, ...) | | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...) | | | | `- rtnl_unlock \ | |- rtnl_lock <-' `- netdev_run_todo | |- ... `- netdev_run_todo | `- rtnl_unlock |- __rtnl_unlock | |- netdev_wait_allrefs_any |- netdev_put(dev, ...) <----------------' Wait refcnt decrement and log splat below To avoid blocking SIOCBRDELBR unnecessarily, let's not call dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF. In the dev_ioctl() path, we do the following: 1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl() 2. Check CAP_NET_ADMIN in dev_ioctl() 3. Call dev_load() in dev_ioctl() 4. Fetch the master dev from ifr.ifr_name in dev_ifsioc() 3. can be done by request_module() in br_ioctl_call(), so we move 1., 2., and 4. to br_ioctl_stub(). Note that 2. is also checked later in add_del_if(), but it's better performed before RTNL. SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since the pre-git era, and there seems to be no specific reason to process them there. [0]: unregister_netdevice: waiting for wpan3 to become free. Usage count = 2 ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4282 [inline] netdev_hold include/linux/netdevice.h:4311 [inline] dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624 dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826 sock_do_ioctl+0x1ca/0x260 net/socket.c:1213 sock_ioctl+0x23a/0x6c0 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-22111.html
  CVE-2025-22111
• https://bugzilla.suse.com/1241572
  SUSE Bug 1241572

Описание

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid journaling sb update on error if journal is destroying Presently we always BUG_ON if trying to start a transaction on a journal marked with JBD2_UNMOUNT, since this should never happen. However, while ltp running stress tests, it was observed that in case of some error handling paths, it is possible for update_super_work to start a transaction after the journal is destroyed eg: (umount) ext4_kill_sb kill_block_super generic_shutdown_super sync_filesystem /* commits all txns */ evict_inodes /* might start a new txn */ ext4_put_super flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */ jbd2_journal_destroy journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; jbd2_journal_commit_transaction jbd2_journal_get_descriptor_buffer jbd2_journal_bmap ext4_journal_bmap ext4_map_blocks ... ext4_inode_error ext4_handle_error schedule_work(&sbi->s_sb_upd_work) /* work queue kicks in */ update_super_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT) Hence, introduce a new mount flag to indicate journal is destroying and only do a journaled (and deferred) update of sb if this flag is not set. Otherwise, just fallback to an un-journaled commit. Further, in the journal destroy path, we have the following sequence: 1. Set mount flag indicating journal is destroying 2. force a commit and wait for it 3. flush pending sb updates This sequence is important as it ensures that, after this point, there is no sb update that might be journaled so it is safe to update the sb outside the journal. (To avoid race discussed in 2d01ddc86606) Also, we don't need a similar check in ext4_grp_locked_error since it is only called from mballoc and AFAICT it would be always valid to schedule work here.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-22113.html
  CVE-2025-22113
• https://bugzilla.suse.com/1241617
  SUSE Bug 1241617

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: init wiphy_work before allocating rfkill fails syzbort reported a uninitialize wiphy_work_lock in cfg80211_dev_free. [1] After rfkill allocation fails, the wiphy release process will be performed, which will cause cfg80211_dev_free to access the uninitialized wiphy_work related data. Move the initialization of wiphy_work to before rfkill initialization to avoid this issue. [1] INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 UID: 0 PID: 5935 Comm: syz-executor550 Not tainted 6.14.0-rc6-syzkaller-00103-g4003c9e78778 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 assign_lock_key kernel/locking/lockdep.c:983 [inline] register_lock_class+0xc39/0x1240 kernel/locking/lockdep.c:1297 __lock_acquire+0x135/0x3c40 kernel/locking/lockdep.c:5103 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3a/0x60 kernel/locking/spinlock.c:162 cfg80211_dev_free+0x30/0x3d0 net/wireless/core.c:1196 device_release+0xa1/0x240 drivers/base/core.c:2568 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1e4/0x5a0 lib/kobject.c:737 put_device+0x1f/0x30 drivers/base/core.c:3774 wiphy_free net/wireless/core.c:1224 [inline] wiphy_new_nm+0x1c1f/0x2160 net/wireless/core.c:562 ieee80211_alloc_hw_nm+0x1b7a/0x2260 net/mac80211/main.c:835 mac80211_hwsim_new_radio+0x1d6/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5185 hwsim_new_radio_nl+0xb42/0x12b0 drivers/net/wireless/virtual/mac80211_hwsim.c:6242 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2533 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1882 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg net/socket.c:733 [inline] ____sys_sendmsg+0xaaf/0xc90 net/socket.c:2573 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2627 __sys_sendmsg+0x16e/0x220 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 Close: https://syzkaller.appspot.com/bug?extid=aaf0488c83d1d5f4f029

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-22119.html
  CVE-2025-22119
• https://bugzilla.suse.com/1241576
  SUSE Bug 1241576
• https://bugzilla.suse.com/1241577
  SUSE Bug 1241577

Описание

In the Linux kernel, the following vulnerability has been resolved: ext4: goto right label 'out_mmap_sem' in ext4_setattr() Otherwise, if ext4_inode_attach_jinode() fails, a hung task will happen because filemap_invalidate_unlock() isn't called to unlock mapping->invalidate_lock. Like this: EXT4-fs error (device sda) in ext4_setattr:5557: Out of memory INFO: task fsstress:374 blocked for more than 122 seconds. Not tainted 6.14.0-rc1-next-20250206-xfstests-dirty #726 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:fsstress state:D stack:0 pid:374 tgid:374 ppid:373 task_flags:0x440140 flags:0x00000000 Call Trace: <TASK> __schedule+0x2c9/0x7f0 schedule+0x27/0xa0 schedule_preempt_disabled+0x15/0x30 rwsem_down_read_slowpath+0x278/0x4c0 down_read+0x59/0xb0 page_cache_ra_unbounded+0x65/0x1b0 filemap_get_pages+0x124/0x3e0 filemap_read+0x114/0x3d0 vfs_read+0x297/0x360 ksys_read+0x6c/0xe0 do_syscall_64+0x4b/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-22120.html
  CVE-2025-22120
• https://bugzilla.suse.com/1241592
  SUSE Bug 1241592

Описание

In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: fix wrong bitmap_limit for clustermd when write sb In clustermd, separate write-intent-bitmaps are used for each cluster node: 0 4k 8k 12k ------------------------------------------------------------------- | idle | md super | bm super [0] + bits | | bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] | | bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits | | bm bits [3, contd] | | | So in node 1, pg_index in __write_sb_page() could equal to bitmap->storage.file_pages. Then bitmap_limit will be calculated to 0. md_super_write() will be called with 0 size. That means the first 4k sb area of node 1 will never be updated through filemap_write_page(). This bug causes hang of mdadm/clustermd_tests/01r1_Grow_resize. Here use (pg_index % bitmap->storage.file_pages) to make calculation of bitmap_limit correct.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-22124.html
  CVE-2025-22124
• https://bugzilla.suse.com/1241595
  SUSE Bug 1241595

Описание

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses Acquire a lock on kvm->srcu when userspace is getting MP state to handle a rather extreme edge case where "accepting" APIC events, i.e. processing pending INIT or SIPI, can trigger accesses to guest memory. If the vCPU is in L2 with INIT *and* a TRIPLE_FAULT request pending, then getting MP state will trigger a nested VM-Exit by way of ->check_nested_events(), and emuating the nested VM-Exit can access guest memory. The splat was originally hit by syzkaller on a Google-internal kernel, and reproduced on an upstream kernel by hacking the triple_fault_event_test selftest to stuff a pending INIT, store an MSR on VM-Exit (to generate a memory access on VMX), and do vcpu_mp_state_get() to trigger the scenario. ============================= WARNING: suspicious RCU usage 6.14.0-rc3-b112d356288b-vmx/pi_lockdep_false_pos-lock #3 Not tainted ----------------------------- include/linux/kvm_host.h:1058 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by triple_fault_ev/1256: #0: ffff88810df5a330 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x8b/0x9a0 [kvm] stack backtrace: CPU: 11 UID: 1000 PID: 1256 Comm: triple_fault_ev Not tainted 6.14.0-rc3-b112d356288b-vmx #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x7f/0x90 lockdep_rcu_suspicious+0x144/0x190 kvm_vcpu_gfn_to_memslot+0x156/0x180 [kvm] kvm_vcpu_read_guest+0x3e/0x90 [kvm] read_and_check_msr_entry+0x2e/0x180 [kvm_intel] __nested_vmx_vmexit+0x550/0xde0 [kvm_intel] kvm_check_nested_events+0x1b/0x30 [kvm] kvm_apic_accept_events+0x33/0x100 [kvm] kvm_arch_vcpu_ioctl_get_mpstate+0x30/0x1d0 [kvm] kvm_vcpu_ioctl+0x33e/0x9a0 [kvm] __x64_sys_ioctl+0x8b/0xb0 do_syscall_64+0x6c/0x170 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK>

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23141.html
  CVE-2025-23141
• https://bugzilla.suse.com/1242782
  SUSE Bug 1242782

Описание

In the Linux kernel, the following vulnerability has been resolved: sctp: detect and prevent references to a freed transport in sendmsg sctp_sendmsg() re-uses associations and transports when possible by doing a lookup based on the socket endpoint and the message destination address, and then sctp_sendmsg_to_asoc() sets the selected transport in all the message chunks to be sent. There's a possible race condition if another thread triggers the removal of that selected transport, for instance, by explicitly unbinding an address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have been set up and before the message is sent. This can happen if the send buffer is full, during the period when the sender thread temporarily releases the socket lock in sctp_wait_for_sndbuf(). This causes the access to the transport data in sctp_outq_select_transport(), when the association outqueue is flushed, to result in a use-after-free read. This change avoids this scenario by having sctp_transport_free() signal the freeing of the transport, tagging it as "dead". In order to do this, the patch restores the "dead" bit in struct sctp_transport, which was removed in commit 47faa1e4c50e ("sctp: remove the dead field of sctp_transport"). Then, in the scenario where the sender thread has released the socket lock in sctp_wait_for_sndbuf(), the bit is checked again after re-acquiring the socket lock to detect the deletion. This is done while holding a reference to the transport to prevent it from being freed in the process. If the transport was deleted while the socket lock was relinquished, sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the send. The bug was found by a private syzbot instance (see the error report [1] and the C reproducer that triggers it [2]).

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23142.html
  CVE-2025-23142
• https://bugzilla.suse.com/1242760
  SUSE Bug 1242760

Описание

In the Linux kernel, the following vulnerability has been resolved: backlight: led_bl: Hold led_access lock when calling led_sysfs_disable() Lockdep detects the following issue on led-backlight removal: [ 142.315935] ------------[ cut here ]------------ [ 142.315954] WARNING: CPU: 2 PID: 292 at drivers/leds/led-core.c:455 led_sysfs_enable+0x54/0x80 ... [ 142.500725] Call trace: [ 142.503176] led_sysfs_enable+0x54/0x80 (P) [ 142.507370] led_bl_remove+0x80/0xa8 [led_bl] [ 142.511742] platform_remove+0x30/0x58 [ 142.515501] device_remove+0x54/0x90 ... Indeed, led_sysfs_enable() has to be called with the led_access lock held. Hold the lock when calling led_sysfs_disable().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23144.html
  CVE-2025-23144
• https://bugzilla.suse.com/1242568
  SUSE Bug 1242568

Описание

In the Linux kernel, the following vulnerability has been resolved: mfd: ene-kb3930: Fix a potential NULL pointer dereference The off_gpios could be NULL. Add missing check in the kb3930_probe(). This is similar to the issue fixed in commit b1ba8bcb2d1f ("backlight: hx8357: Fix potential NULL pointer dereference"). This was detected by our static analysis tool.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23146.html
  CVE-2025-23146
• https://bugzilla.suse.com/1242559
  SUSE Bug 1242559

Описание

In the Linux kernel, the following vulnerability has been resolved: i3c: Add NULL pointer check in i3c_master_queue_ibi() The I3C master driver may receive an IBI from a target device that has not been probed yet. In such cases, the master calls `i3c_master_queue_ibi()` to queue an IBI work task, leading to "Unable to handle kernel read from unreadable memory" and resulting in a kernel panic. Typical IBI handling flow: 1. The I3C master scans target devices and probes their respective drivers. 2. The target device driver calls `i3c_device_request_ibi()` to enable IBI and assigns `dev->ibi = ibi`. 3. The I3C master receives an IBI from the target device and calls `i3c_master_queue_ibi()` to queue the target device driver's IBI handler task. However, since target device events are asynchronous to the I3C probe sequence, step 3 may occur before step 2, causing `dev->ibi` to be `NULL`, leading to a kernel panic. Add a NULL pointer check in `i3c_master_queue_ibi()` to prevent accessing an uninitialized `dev->ibi`, ensuring stability.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23147.html
  CVE-2025-23147
• https://bugzilla.suse.com/1242530
  SUSE Bug 1242530

Описание

In the Linux kernel, the following vulnerability has been resolved: soc: samsung: exynos-chipid: Add NULL pointer check in exynos_chipid_probe() soc_dev_attr->revision could be NULL, thus, a pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02 ("ice: Fix some null pointer dereference issues in ice_ptp.c"). This issue is found by our static analysis tool.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23148.html
  CVE-2025-23148
• https://bugzilla.suse.com/1242578
  SUSE Bug 1242578

Описание

In the Linux kernel, the following vulnerability has been resolved: tpm: do not start chip while suspended Checking TPM_CHIP_FLAG_SUSPENDED after the call to tpm_find_get_ops() can lead to a spurious tpm_chip_start() call: [35985.503771] i2c i2c-1: Transfer while suspended [35985.503796] WARNING: CPU: 0 PID: 74 at drivers/i2c/i2c-core.h:56 __i2c_transfer+0xbe/0x810 [35985.503802] Modules linked in: [35985.503808] CPU: 0 UID: 0 PID: 74 Comm: hwrng Tainted: G W 6.13.0-next-20250203-00005-gfa0cb5642941 #19 9c3d7f78192f2d38e32010ac9c90fdc71109ef6f [35985.503814] Tainted: [W]=WARN [35985.503817] Hardware name: Google Morphius/Morphius, BIOS Google_Morphius.13434.858.0 10/26/2023 [35985.503819] RIP: 0010:__i2c_transfer+0xbe/0x810 [35985.503825] Code: 30 01 00 00 4c 89 f7 e8 40 fe d8 ff 48 8b 93 80 01 00 00 48 85 d2 75 03 49 8b 16 48 c7 c7 0a fb 7c a7 48 89 c6 e8 32 ad b0 fe <0f> 0b b8 94 ff ff ff e9 33 04 00 00 be 02 00 00 00 83 fd 02 0f 5 [35985.503828] RSP: 0018:ffffa106c0333d30 EFLAGS: 00010246 [35985.503833] RAX: 074ba64aa20f7000 RBX: ffff8aa4c1167120 RCX: 0000000000000000 [35985.503836] RDX: 0000000000000000 RSI: ffffffffa77ab0e4 RDI: 0000000000000001 [35985.503838] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [35985.503841] R10: 0000000000000004 R11: 00000001000313d5 R12: ffff8aa4c10f1820 [35985.503843] R13: ffff8aa4c0e243c0 R14: ffff8aa4c1167250 R15: ffff8aa4c1167120 [35985.503846] FS: 0000000000000000(0000) GS:ffff8aa4eae00000(0000) knlGS:0000000000000000 [35985.503849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [35985.503852] CR2: 00007fab0aaf1000 CR3: 0000000105328000 CR4: 00000000003506f0 [35985.503855] Call Trace: [35985.503859] <TASK> [35985.503863] ? __warn+0xd4/0x260 [35985.503868] ? __i2c_transfer+0xbe/0x810 [35985.503874] ? report_bug+0xf3/0x210 [35985.503882] ? handle_bug+0x63/0xb0 [35985.503887] ? exc_invalid_op+0x16/0x50 [35985.503892] ? asm_exc_invalid_op+0x16/0x20 [35985.503904] ? __i2c_transfer+0xbe/0x810 [35985.503913] tpm_cr50_i2c_transfer_message+0x24/0xf0 [35985.503920] tpm_cr50_i2c_read+0x8e/0x120 [35985.503928] tpm_cr50_request_locality+0x75/0x170 [35985.503935] tpm_chip_start+0x116/0x160 [35985.503942] tpm_try_get_ops+0x57/0x90 [35985.503948] tpm_find_get_ops+0x26/0xd0 [35985.503955] tpm_get_random+0x2d/0x80 Don't move forward with tpm_chip_start() inside tpm_try_get_ops(), unless TPM_CHIP_FLAG_SUSPENDED is not set. tpm_find_get_ops() will return NULL in such a failure case.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23149.html
  CVE-2025-23149
• https://bugzilla.suse.com/1242758
  SUSE Bug 1242758

Описание

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Fix race between unprepare and queue_buf A client driver may use mhi_unprepare_from_transfer() to quiesce incoming data during the client driver's tear down. The client driver might also be processing data at the same time, resulting in a call to mhi_queue_buf() which will invoke mhi_gen_tre(). If mhi_gen_tre() runs after mhi_unprepare_from_transfer() has torn down the channel, a panic will occur due to an invalid dereference leading to a page fault. This occurs because mhi_gen_tre() does not verify the channel state after locking it. Fix this by having mhi_gen_tre() confirm the channel state is valid, or return error to avoid accessing deinitialized data. [mani: added stable tag]

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23151.html
  CVE-2025-23151
• https://bugzilla.suse.com/1242512
  SUSE Bug 1242512

Описание

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Fix accessing freed irq affinity_hint The cpumask should not be a local variable, since its pointer is saved to irq_desc and may be accessed from procfs. To fix it, use the persistent mask cpumask_of(cpu#).

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23155.html
  CVE-2025-23155
• https://bugzilla.suse.com/1242573
  SUSE Bug 1242573

Описание

In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi_parser: refactor hfi packet parsing logic words_count denotes the number of words in total payload, while data points to payload of various property within it. When words_count reaches last word, data can access memory beyond the total payload. This can lead to OOB access. With this patch, the utility api for handling individual properties now returns the size of data consumed. Accordingly remaining bytes are calculated before parsing the payload, thereby eliminates the OOB access possibilities.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23156.html
  CVE-2025-23156
• https://bugzilla.suse.com/1242569
  SUSE Bug 1242569

Описание

In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi_parser: add check to avoid out of bound access There is a possibility that init_codecs is invoked multiple times during manipulated payload from video firmware. In such case, if codecs_count can get incremented to value more than MAX_CODEC_NUM, there can be OOB access. Reset the count so that it always starts from beginning.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23157.html
  CVE-2025-23157
• https://bugzilla.suse.com/1242532
  SUSE Bug 1242532

Описание

In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: add check to handle incorrect queue size qsize represents size of shared queued between driver and video firmware. Firmware can modify this value to an invalid large value. In such situation, empty_space will be bigger than the space actually available. Since new_wr_idx is not checked, so the following code will result in an OOB write. ... qsize = qhdr->q_size if (wr_idx >= rd_idx) empty_space = qsize - (wr_idx - rd_idx) .... if (new_wr_idx < qsize) { memcpy(wr_ptr, packet, dwords << 2) --> OOB write Add check to ensure qsize is within the allocated size while reading and writing packets into the queue.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23158.html
  CVE-2025-23158
• https://bugzilla.suse.com/1242531
  SUSE Bug 1242531

Описание

In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: add a check to handle OOB in sfr region sfr->buf_size is in shared memory and can be modified by malicious user. OOB write is possible when the size is made higher than actual sfr data buffer. Cap the size to allocated size for such cases.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23159.html
  CVE-2025-23159
• https://bugzilla.suse.com/1242529
  SUSE Bug 1242529

Описание

In the Linux kernel, the following vulnerability has been resolved: PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type The access to the PCI config space via pci_ops::read and pci_ops::write is a low-level hardware access. The functions can be accessed with disabled interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this purpose. A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in the same context as the pci_lock. Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with interrupts disabled. This was reported as: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 Call Trace: rt_spin_lock+0x4e/0x130 vmd_pci_read+0x8d/0x100 [vmd] pci_user_read_config_byte+0x6f/0xe0 pci_read_config+0xfe/0x290 sysfs_kf_bin_read+0x68/0x90 [bigeasy: reword commit message] Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> [kwilczynski: commit log] [bhelgaas: add back report info from https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/]

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23161.html
  CVE-2025-23161
• https://bugzilla.suse.com/1242792
  SUSE Bug 1242792

Описание

In the Linux kernel, the following vulnerability has been resolved: net: vlan: don't propagate flags on open With the device instance lock, there is now a possibility of a deadlock: [ 1.211455] ============================================ [ 1.211571] WARNING: possible recursive locking detected [ 1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted [ 1.211823] -------------------------------------------- [ 1.211936] ip/184 is trying to acquire lock: [ 1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0 [ 1.212207] [ 1.212207] but task is already holding lock: [ 1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0 [ 1.212487] [ 1.212487] other info that might help us debug this: [ 1.212626] Possible unsafe locking scenario: [ 1.212626] [ 1.212751] CPU0 [ 1.212815] ---- [ 1.212871] lock(&dev->lock); [ 1.212944] lock(&dev->lock); [ 1.213016] [ 1.213016] *** DEADLOCK *** [ 1.213016] [ 1.213143] May be due to missing lock nesting notation [ 1.213143] [ 1.213294] 3 locks held by ip/184: [ 1.213371] #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0 [ 1.213543] #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0 [ 1.213727] #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0 [ 1.213895] [ 1.213895] stack backtrace: [ 1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 [ 1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 1.213994] Call Trace: [ 1.213995] <TASK> [ 1.213996] dump_stack_lvl+0x8e/0xd0 [ 1.214000] print_deadlock_bug+0x28b/0x2a0 [ 1.214020] lock_acquire+0xea/0x2a0 [ 1.214027] __mutex_lock+0xbf/0xd40 [ 1.214038] dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI [ 1.214040] vlan_dev_open+0xa5/0x170 # ndo_open on vlandev [ 1.214042] __dev_open+0x145/0x270 [ 1.214046] __dev_change_flags+0xb0/0x1e0 [ 1.214051] netif_change_flags+0x22/0x60 # IFF_UP vlandev [ 1.214053] dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info [ 1.214055] vlan_device_event+0x766/0x7c0 # on netdevsim0 [ 1.214058] notifier_call_chain+0x78/0x120 [ 1.214062] netif_open+0x6d/0x90 [ 1.214064] dev_open+0x5b/0xb0 # locks netdevsim0 [ 1.214066] bond_enslave+0x64c/0x1230 [ 1.214075] do_set_master+0x175/0x1e0 # on netdevsim0 [ 1.214077] do_setlink+0x516/0x13b0 [ 1.214094] rtnl_newlink+0xaba/0xb80 [ 1.214132] rtnetlink_rcv_msg+0x440/0x490 [ 1.214144] netlink_rcv_skb+0xeb/0x120 [ 1.214150] netlink_unicast+0x1f9/0x320 [ 1.214153] netlink_sendmsg+0x346/0x3f0 [ 1.214157] __sock_sendmsg+0x86/0xb0 [ 1.214160] ____sys_sendmsg+0x1c8/0x220 [ 1.214164] ___sys_sendmsg+0x28f/0x2d0 [ 1.214179] __x64_sys_sendmsg+0xef/0x140 [ 1.214184] do_syscall_64+0xec/0x1d0 [ 1.214190] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 1.214191] RIP: 0033:0x7f2d1b4a7e56 Device setup: netdevsim0 (down) ^ ^ bond netdevsim1.100@netdevsim1 allmulticast=on (down) When we enslave the lower device (netdevsim0) which has a vlan, we propagate vlan's allmuti/promisc flags during ndo_open. This causes (re)locking on of the real_dev. Propagate allmulti/promisc on flags change, not on the open. There is a slight semantics change that vlans that are down now propagate the flags, but this seems unlikely to result in the real issues. Reproducer: echo 0 1 > /sys/bus/netdevsim/new_device dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*) dev=$(echo $dev_path | rev | cut -d/ -f1 | rev) ip link set dev $dev name netdevsim0 ip link set dev netdevsim0 up ip link add link netdevsim0 name netdevsim0.100 type vlan id 100 ip link set dev netdevsim0.100 allm ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-23163.html
  CVE-2025-23163
• https://bugzilla.suse.com/1242837
  SUSE Bug 1242837

Описание

In the Linux kernel, the following vulnerability has been resolved: ext4: ignore xattrs past end Once inside 'ext4_xattr_inode_dec_ref_all' we should ignore xattrs entries past the 'end' entry. This fixes the following KASAN reported issue: ================================================================== BUG: KASAN: slab-use-after-free in ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 Read of size 4 at addr ffff888012c120c4 by task repro/2065 CPU: 1 UID: 0 PID: 2065 Comm: repro Not tainted 6.13.0-rc2+ #11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1fd/0x300 ? tcp_gro_dev_warn+0x260/0x260 ? _printk+0xc0/0x100 ? read_lock_is_recursive+0x10/0x10 ? irq_work_queue+0x72/0xf0 ? __virt_addr_valid+0x17b/0x4b0 print_address_description+0x78/0x390 print_report+0x107/0x1f0 ? __virt_addr_valid+0x17b/0x4b0 ? __virt_addr_valid+0x3ff/0x4b0 ? __phys_addr+0xb5/0x160 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 kasan_report+0xcc/0x100 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 ext4_xattr_inode_dec_ref_all+0xb8c/0xe90 ? ext4_xattr_delete_inode+0xd30/0xd30 ? __ext4_journal_ensure_credits+0x5f0/0x5f0 ? __ext4_journal_ensure_credits+0x2b/0x5f0 ? inode_update_timestamps+0x410/0x410 ext4_xattr_delete_inode+0xb64/0xd30 ? ext4_truncate+0xb70/0xdc0 ? ext4_expand_extra_isize_ea+0x1d20/0x1d20 ? __ext4_mark_inode_dirty+0x670/0x670 ? ext4_journal_check_start+0x16f/0x240 ? ext4_inode_is_fast_symlink+0x2f2/0x3a0 ext4_evict_inode+0xc8c/0xff0 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0 ? do_raw_spin_unlock+0x53/0x8a0 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0 evict+0x4ac/0x950 ? proc_nr_inodes+0x310/0x310 ? trace_ext4_drop_inode+0xa2/0x220 ? _raw_spin_unlock+0x1a/0x30 ? iput+0x4cb/0x7e0 do_unlinkat+0x495/0x7c0 ? try_break_deleg+0x120/0x120 ? 0xffffffff81000000 ? __check_object_size+0x15a/0x210 ? strncpy_from_user+0x13e/0x250 ? getname_flags+0x1dc/0x530 __x64_sys_unlinkat+0xc8/0xf0 do_syscall_64+0x65/0x110 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x434ffd Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8 RSP: 002b:00007ffc50fa7b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000107 RAX: ffffffffffffffda RBX: 00007ffc50fa7e18 RCX: 0000000000434ffd RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 00007ffc50fa7be0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffc50fa7e08 R14: 00000000004bbf30 R15: 0000000000000001 </TASK> The buggy address belongs to the object at ffff888012c12000 which belongs to the cache filp of size 360 The buggy address is located 196 bytes inside of freed 360-byte region [ffff888012c12000, ffff888012c12168) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12c12 head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x40(head|node=0|zone=0) page_type: f5(slab) raw: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004 raw: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000 head: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004 head: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000 head: 0000000000000001 ffffea00004b0481 ffffffffffffffff 0000000000000000 head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888012c11f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888012c12000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888012c12080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888012c12100: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc ffff888012c12180: fc fc fc fc fc fc fc fc fc ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37738.html
  CVE-2025-37738
• https://bugzilla.suse.com/1242846
  SUSE Bug 1242846

Описание

In the Linux kernel, the following vulnerability has been resolved: jfs: add sanity check for agwidth in dbMount The width in dmapctl of the AG is zero, it trigger a divide error when calculating the control page level in dbAllocAG. To avoid this issue, add a check for agwidth in dbAllocAG.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37740.html
  CVE-2025-37740
• https://bugzilla.suse.com/1243006
  SUSE Bug 1243006

Описание

In the Linux kernel, the following vulnerability has been resolved: jfs: Prevent copying of nlink with value 0 from disk inode syzbot report a deadlock in diFree. [1] When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4, which does not match the mounted loop device, causing the mapping of the mounted loop device to be invalidated. When creating the directory and creating the inode of iag in diReadSpecial(), read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the metapage data it returns is corrupted, which causes the nlink value of 0 to be assigned to the iag inode when executing copy_from_dinode(), which ultimately causes a deadlock when entering diFree(). To avoid this, first check the nlink value of dinode before setting iag inode. [1] WARNING: possible recursive locking detected 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted -------------------------------------------- syz-executor301/5309 is trying to acquire lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 but task is already holding lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(imap->im_aglock[index])); lock(&(imap->im_aglock[index])); *** DEADLOCK *** May be due to missing lock nesting notation 5 locks held by syz-executor301/5309: #0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline] #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026 #2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669 stack backtrace: CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037 check_deadlock kernel/locking/lockdep.c:3089 [inline] validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891 __lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156 evict+0x4e8/0x9b0 fs/inode.c:725 diFreeSpecial fs/jfs/jfs_imap.c:552 [inline] duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022 diNewIAG fs/jfs/jfs_imap.c:2597 [inline] diAllocExt fs/jfs/jfs_imap.c:1905 [inline] diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669 diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56 jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdirat fs/namei.c:4295 [inline] __se_sys_mkdirat fs/namei.c:4293 [inline] __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293 do_syscall_x64 arch/x86/en ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37741.html
  CVE-2025-37741
• https://bugzilla.suse.com/1243015
  SUSE Bug 1243015

Описание

In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uninit-value access of imap allocated in the diMount() function syzbot reports that hex_dump_to_buffer is using uninit-value: ===================================================== BUG: KMSAN: uninit-value in hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171 hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171 print_hex_dump+0x13d/0x3e0 lib/hexdump.c:276 diFree+0x5ba/0x4350 fs/jfs/jfs_imap.c:876 jfs_evict_inode+0x510/0x550 fs/jfs/inode.c:156 evict+0x723/0xd10 fs/inode.c:796 iput_final fs/inode.c:1946 [inline] iput+0x97b/0xdb0 fs/inode.c:1972 txUpdateMap+0xf3e/0x1150 fs/jfs/jfs_txnmgr.c:2367 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x627/0x11d0 fs/jfs/jfs_txnmgr.c:2733 kthread+0x6b9/0xef0 kernel/kthread.c:464 ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_post_alloc_hook mm/slub.c:4121 [inline] slab_alloc_node mm/slub.c:4164 [inline] __kmalloc_cache_noprof+0x8e3/0xdf0 mm/slub.c:4320 kmalloc_noprof include/linux/slab.h:901 [inline] diMount+0x61/0x7f0 fs/jfs/jfs_imap.c:105 jfs_mount+0xa8e/0x11d0 fs/jfs/jfs_mount.c:176 jfs_fill_super+0xa47/0x17c0 fs/jfs/super.c:523 get_tree_bdev_flags+0x6ec/0x910 fs/super.c:1636 get_tree_bdev+0x37/0x50 fs/super.c:1659 jfs_get_tree+0x34/0x40 fs/jfs/super.c:635 vfs_get_tree+0xb1/0x5a0 fs/super.c:1814 do_new_mount+0x71f/0x15e0 fs/namespace.c:3560 path_mount+0x742/0x1f10 fs/namespace.c:3887 do_mount fs/namespace.c:3900 [inline] __do_sys_mount fs/namespace.c:4111 [inline] __se_sys_mount+0x71f/0x800 fs/namespace.c:4088 __x64_sys_mount+0xe4/0x150 fs/namespace.c:4088 x64_sys_call+0x39bf/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:166 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ===================================================== The reason is that imap is not properly initialized after memory allocation. It will cause the snprintf() function to write uninitialized data into linebuf within hex_dump_to_buffer(). Fix this by using kzalloc instead of kmalloc to clear its content at the beginning in diMount().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37742.html
  CVE-2025-37742
• https://bugzilla.suse.com/1243011
  SUSE Bug 1243011

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid memory leak while enabling statistics Driver uses monitor destination rings for extended statistics mode and standalone monitor mode. In extended statistics mode, TLVs are parsed from the buffer received from the monitor destination ring and assigned to the ppdu_info structure to update per-packet statistics. In standalone monitor mode, along with per-packet statistics, the packet data (payload) is captured, and the driver updates per MSDU to mac80211. When the AP interface is enabled, only extended statistics mode is activated. As part of enabling monitor rings for collecting statistics, the driver subscribes to HAL_RX_MPDU_START TLV in the filter configuration. This TLV is received from the monitor destination ring, and kzalloc for the mon_mpdu object occurs, which is not freed, leading to a memory leak. The kzalloc for the mon_mpdu object is only required while enabling the standalone monitor interface. This causes a memory leak while enabling extended statistics mode in the driver. Fix this memory leak by removing the kzalloc for the mon_mpdu object in the HAL_RX_MPDU_START TLV handling. Additionally, remove the standalone monitor mode handlings in the HAL_MON_BUF_ADDR and HAL_RX_MSDU_END TLVs. These TLV tags will be handled properly when enabling standalone monitor mode in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37743.html
  CVE-2025-37743
• https://bugzilla.suse.com/1242163
  SUSE Bug 1242163

Описание

In the Linux kernel, the following vulnerability has been resolved: perf: Fix hang while freeing sigtrap event Perf can hang while freeing a sigtrap event if a related deferred signal hadn't managed to be sent before the file got closed: perf_event_overflow() task_work_add(perf_pending_task) fput() task_work_add(____fput()) task_work_run() ____fput() perf_release() perf_event_release_kernel() _free_event() perf_pending_task_sync() task_work_cancel() -> FAILED rcuwait_wait_event() Once task_work_run() is running, the list of pending callbacks is removed from the task_struct and from this point on task_work_cancel() can't remove any pending and not yet started work items, hence the task_work_cancel() failure and the hang on rcuwait_wait_event(). Task work could be changed to remove one work at a time, so a work running on the current task can always cancel a pending one, however the wait / wake design is still subject to inverted dependencies when remote targets are involved, as pictured by Oleg: T1 T2 fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid); close(fd) close(fd) <IRQ> <IRQ> perf_event_overflow() perf_event_overflow() task_work_add(perf_pending_task) task_work_add(perf_pending_task) </IRQ> </IRQ> fput() fput() task_work_add(____fput()) task_work_add(____fput()) task_work_run() task_work_run() ____fput() ____fput() perf_release() perf_release() perf_event_release_kernel() perf_event_release_kernel() _free_event() _free_event() perf_pending_task_sync() perf_pending_task_sync() rcuwait_wait_event() rcuwait_wait_event() Therefore the only option left is to acquire the event reference count upon queueing the perf task work and release it from the task work, just like it was done before 3a5465418f5f ("perf: Fix event leak upon exec and file release") but without the leaks it fixed. Some adjustments are necessary to make it work: * A child event might dereference its parent upon freeing. Care must be taken to release the parent last. * Some places assuming the event doesn't have any reference held and therefore can be freed right away must instead put the reference and let the reference counting to its job.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37747.html
  CVE-2025-37747
• https://bugzilla.suse.com/1242520
  SUSE Bug 1242520

Описание

In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: move the limit validation It is not sufficient to directly validate the limit on the data that the user passes as it can be updated based on how the other parameters are changed. Move the check at the end of the configuration update process to also catch scenarios where the limit is indirectly updated, for example with the following configurations: tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 depth 1 tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 divisor 1 This fixes the following syzkaller reported crash: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:203:6 index 65535 is out of range for type 'struct sfq_head[128]' CPU: 1 UID: 0 PID: 3037 Comm: syz.2.16 Not tainted 6.14.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x201/0x300 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_out_of_bounds+0xf5/0x120 lib/ubsan.c:429 sfq_link net/sched/sch_sfq.c:203 [inline] sfq_dec+0x53c/0x610 net/sched/sch_sfq.c:231 sfq_dequeue+0x34e/0x8c0 net/sched/sch_sfq.c:493 sfq_reset+0x17/0x60 net/sched/sch_sfq.c:518 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035 tbf_reset+0x41/0x110 net/sched/sch_tbf.c:339 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035 dev_reset_queue+0x100/0x1b0 net/sched/sch_generic.c:1311 netdev_for_each_tx_queue include/linux/netdevice.h:2590 [inline] dev_deactivate_many+0x7e5/0xe70 net/sched/sch_generic.c:1375

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37752.html
  CVE-2025-37752
• https://bugzilla.suse.com/1242504
  SUSE Bug 1242504
• https://bugzilla.suse.com/1245776
  SUSE Bug 1245776

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/i915/huc: Fix fence not released on early probe errors HuC delayed loading fence, introduced with commit 27536e03271da ("drm/i915/huc: track delayed HuC load with a fence"), is registered with object tracker early on driver probe but unregistered only from driver remove, which is not called on early probe errors. Since its memory is allocated under devres, then released anyway, it may happen to be allocated again to the fence and reused on future driver probes, resulting in kernel warnings that taint the kernel: <4> [309.731371] ------------[ cut here ]------------ <3> [309.731373] ODEBUG: init destroyed (active state 0) object: ffff88813d7dd2e0 object type: i915_sw_fence hint: sw_fence_dummy_notify+0x0/0x20 [i915] <4> [309.731575] WARNING: CPU: 2 PID: 3161 at lib/debugobjects.c:612 debug_print_object+0x93/0xf0 ... <4> [309.731693] CPU: 2 UID: 0 PID: 3161 Comm: i915_module_loa Tainted: G U 6.14.0-CI_DRM_16362-gf0fd77956987+ #1 ... <4> [309.731700] RIP: 0010:debug_print_object+0x93/0xf0 ... <4> [309.731728] Call Trace: <4> [309.731730] <TASK> ... <4> [309.731949] __debug_object_init+0x17b/0x1c0 <4> [309.731957] debug_object_init+0x34/0x50 <4> [309.732126] __i915_sw_fence_init+0x34/0x60 [i915] <4> [309.732256] intel_huc_init_early+0x4b/0x1d0 [i915] <4> [309.732468] intel_uc_init_early+0x61/0x680 [i915] <4> [309.732667] intel_gt_common_init_early+0x105/0x130 [i915] <4> [309.732804] intel_root_gt_init_early+0x63/0x80 [i915] <4> [309.732938] i915_driver_probe+0x1fa/0xeb0 [i915] <4> [309.733075] i915_pci_probe+0xe6/0x220 [i915] <4> [309.733198] local_pci_probe+0x44/0xb0 <4> [309.733203] pci_device_probe+0xf4/0x270 <4> [309.733209] really_probe+0xee/0x3c0 <4> [309.733215] __driver_probe_device+0x8c/0x180 <4> [309.733219] driver_probe_device+0x24/0xd0 <4> [309.733223] __driver_attach+0x10f/0x220 <4> [309.733230] bus_for_each_dev+0x7d/0xe0 <4> [309.733236] driver_attach+0x1e/0x30 <4> [309.733239] bus_add_driver+0x151/0x290 <4> [309.733244] driver_register+0x5e/0x130 <4> [309.733247] __pci_register_driver+0x7d/0x90 <4> [309.733251] i915_pci_register_driver+0x23/0x30 [i915] <4> [309.733413] i915_init+0x34/0x120 [i915] <4> [309.733655] do_one_initcall+0x62/0x3f0 <4> [309.733667] do_init_module+0x97/0x2a0 <4> [309.733671] load_module+0x25ff/0x2890 <4> [309.733688] init_module_from_file+0x97/0xe0 <4> [309.733701] idempotent_init_module+0x118/0x330 <4> [309.733711] __x64_sys_finit_module+0x77/0x100 <4> [309.733715] x64_sys_call+0x1f37/0x2650 <4> [309.733719] do_syscall_64+0x91/0x180 <4> [309.733763] entry_SYSCALL_64_after_hwframe+0x76/0x7e <4> [309.733792] </TASK> ... <4> [309.733806] ---[ end trace 0000000000000000 ]--- That scenario is most easily reproducible with igt@i915_module_load@reload-with-fault-injection. Fix the issue by moving the cleanup step to driver release path. (cherry picked from commit 795dbde92fe5c6996a02a5b579481de73035e7bf)

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37754.html
  CVE-2025-37754
• https://bugzilla.suse.com/1242524
  SUSE Bug 1242524

Описание

In the Linux kernel, the following vulnerability has been resolved: net: tls: explicitly disallow disconnect syzbot discovered that it can disconnect a TLS socket and then run into all sort of unexpected corner cases. I have a vague recollection of Eric pointing this out to us a long time ago. Supporting disconnect is really hard, for one thing if offload is enabled we'd need to wait for all packets to be _acked_. Disconnect is not commonly used, disallow it. The immediate problem syzbot run into is the warning in the strp, but that's just the easiest bug to trigger: WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 Call Trace: <TASK> tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363 tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043 inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678 sock_recvmsg_nosec net/socket.c:1023 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1045 __sys_recvfrom+0x202/0x380 net/socket.c:2237

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37756.html
  CVE-2025-37756
• https://bugzilla.suse.com/1242515
  SUSE Bug 1242515

Описание

In the Linux kernel, the following vulnerability has been resolved: tipc: fix memory leak in tipc_link_xmit In case the backlog transmit queue for system-importance messages is overloaded, tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to memory leak and failure when a skb is allocated. This commit fixes this issue by purging the skb list before tipc_link_xmit() returns.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37757.html
  CVE-2025-37757
• https://bugzilla.suse.com/1242521
  SUSE Bug 1242521

Описание

In the Linux kernel, the following vulnerability has been resolved: ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe() devm_ioremap() returns NULL on error. Currently, pxa_ata_probe() does not check for this case, which can result in a NULL pointer dereference. Add NULL check after devm_ioremap() to prevent this issue.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37758.html
  CVE-2025-37758
• https://bugzilla.suse.com/1242514
  SUSE Bug 1242514

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: prime: fix ttm_bo_delayed_delete oops Fix an oops in ttm_bo_delayed_delete which results from dererencing a dangling pointer: Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP CPU: 4 UID: 0 PID: 1082 Comm: kworker/u65:2 Not tainted 6.14.0-rc4-00267-g505460b44513-dirty #216 Hardware name: LENOVO 82N6/LNVNB161216, BIOS GKCN65WW 01/16/2024 Workqueue: ttm ttm_bo_delayed_delete [ttm] RIP: 0010:dma_resv_iter_first_unlocked+0x55/0x290 Code: 31 f6 48 c7 c7 00 2b fa aa e8 97 bd 52 ff e8 a2 c1 53 00 5a 85 c0 74 48 e9 88 01 00 00 4c 89 63 20 4d 85 e4 0f 84 30 01 00 00 <41> 8b 44 24 10 c6 43 2c 01 48 89 df 89 43 28 e8 97 fd ff ff 4c 8b RSP: 0018:ffffbf9383473d60 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffffbf9383473d88 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffbf9383473d78 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 6b6b6b6b6b6b6b6b R13: ffffa003bbf78580 R14: ffffa003a6728040 R15: 00000000000383cc FS: 0000000000000000(0000) GS:ffffa00991c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000758348024dd0 CR3: 000000012c259000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x26 ? die_addr+0x3d/0x70 ? exc_general_protection+0x159/0x460 ? asm_exc_general_protection+0x27/0x30 ? dma_resv_iter_first_unlocked+0x55/0x290 dma_resv_wait_timeout+0x56/0x100 ttm_bo_delayed_delete+0x69/0xb0 [ttm] process_one_work+0x217/0x5c0 worker_thread+0x1c8/0x3d0 ? apply_wqattrs_cleanup.part.0+0xc0/0xc0 kthread+0x10b/0x240 ? kthreads_online_cpu+0x140/0x140 ret_from_fork+0x40/0x70 ? kthreads_online_cpu+0x140/0x140 ret_from_fork_asm+0x11/0x20 </TASK> The cause of this is: - drm_prime_gem_destroy calls dma_buf_put(dma_buf) which releases the reference to the shared dma_buf. The reference count is 0, so the dma_buf is destroyed, which in turn decrements the corresponding amdgpu_bo reference count to 0, and the amdgpu_bo is destroyed - calling drm_gem_object_release then dma_resv_fini (which destroys the reservation object), then finally freeing the amdgpu_bo. - nouveau_bo obj->bo.base.resv is now a dangling pointer to the memory formerly allocated to the amdgpu_bo. - nouveau_gem_object_del calls ttm_bo_put(&nvbo->bo) which calls ttm_bo_release, which schedules ttm_bo_delayed_delete. - ttm_bo_delayed_delete runs and dereferences the dangling resv pointer, resulting in a general protection fault. Fix this by moving the drm_prime_gem_destroy call from nouveau_gem_object_del to nouveau_bo_del_ttm. This ensures that it will be run after ttm_bo_delayed_delete.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37765.html
  CVE-2025-37765
• https://bugzilla.suse.com/1242761
  SUSE Bug 1242761

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37766.html
  CVE-2025-37766
• https://bugzilla.suse.com/1242785
  SUSE Bug 1242785

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37767.html
  CVE-2025-37767
• https://bugzilla.suse.com/1242501
  SUSE Bug 1242501

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37768.html
  CVE-2025-37768
• https://bugzilla.suse.com/1242567
  SUSE Bug 1242567

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm/smu11: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. (cherry picked from commit da7dc714a8f8e1c9fc33c57cd63583779a3bef71)

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37769.html
  CVE-2025-37769
• https://bugzilla.suse.com/1242587
  SUSE Bug 1242587

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37770.html
  CVE-2025-37770
• https://bugzilla.suse.com/1242764
  SUSE Bug 1242764

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37771.html
  CVE-2025-37771
• https://bugzilla.suse.com/1242781
  SUSE Bug 1242781

Описание

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix workqueue crash in cma_netevent_work_handler struct rdma_cm_id has member "struct work_struct net_work" that is reused for enqueuing cma_netevent_work_handler()s onto cma_wq. Below crash[1] can occur if more than one call to cma_netevent_callback() occurs in quick succession, which further enqueues cma_netevent_work_handler()s for the same rdma_cm_id, overwriting any previously queued work-item(s) that was just scheduled to run i.e. there is no guarantee the queued work item may run between two successive calls to cma_netevent_callback() and the 2nd INIT_WORK would overwrite the 1st work item (for the same rdma_cm_id), despite grabbing id_table_lock during enqueue. Also drgn analysis [2] indicates the work item was likely overwritten. Fix this by moving the INIT_WORK() to __rdma_create_id(), so that it doesn't race with any existing queue_work() or its worker thread. [1] Trimmed crash stack: ============================================= BUG: kernel NULL pointer dereference, address: 0000000000000008 kworker/u256:6 ... 6.12.0-0... Workqueue: cma_netevent_work_handler [rdma_cm] (rdma_cm) RIP: 0010:process_one_work+0xba/0x31a Call Trace: worker_thread+0x266/0x3a0 kthread+0xcf/0x100 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1a/0x30 ============================================= [2] drgn crash analysis: >>> trace = prog.crashed_thread().stack_trace() >>> trace (0) crash_setup_regs (./arch/x86/include/asm/kexec.h:111:15) (1) __crash_kexec (kernel/crash_core.c:122:4) (2) panic (kernel/panic.c:399:3) (3) oops_end (arch/x86/kernel/dumpstack.c:382:3) ... (8) process_one_work (kernel/workqueue.c:3168:2) (9) process_scheduled_works (kernel/workqueue.c:3310:3) (10) worker_thread (kernel/workqueue.c:3391:4) (11) kthread (kernel/kthread.c:389:9) Line workqueue.c:3168 for this kernel version is in process_one_work(): 3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN); >>> trace[8]["work"] *(struct work_struct *)0xffff92577d0a21d8 = { .data = (atomic_long_t){ .counter = (s64)536870912, <=== Note }, .entry = (struct list_head){ .next = (struct list_head *)0xffff924d075924c0, .prev = (struct list_head *)0xffff924d075924c0, }, .func = (work_func_t)cma_netevent_work_handler+0x0 = 0xffffffffc2cec280, } Suspicion is that pwq is NULL: >>> trace[8]["pwq"] (struct pool_workqueue *)<absent> In process_one_work(), pwq is assigned from: struct pool_workqueue *pwq = get_work_pwq(work); and get_work_pwq() is: static struct pool_workqueue *get_work_pwq(struct work_struct *work) { unsigned long data = atomic_long_read(&work->data); if (data & WORK_STRUCT_PWQ) return work_struct_pwq(data); else return NULL; } WORK_STRUCT_PWQ is 0x4: >>> print(repr(prog['WORK_STRUCT_PWQ'])) Object(prog, 'enum work_flags', value=4) But work->data is 536870912 which is 0x20000000. So, get_work_pwq() returns NULL and we crash in process_one_work(): 3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN); =============================================

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37772.html
  CVE-2025-37772
• https://bugzilla.suse.com/1242563
  SUSE Bug 1242563

Описание

In the Linux kernel, the following vulnerability has been resolved: i2c: cros-ec-tunnel: defer probe if parent EC is not present When i2c-cros-ec-tunnel and the EC driver are built-in, the EC parent device will not be found, leading to NULL pointer dereference. That can also be reproduced by unbinding the controller driver and then loading i2c-cros-ec-tunnel module (or binding the device). [ 271.991245] BUG: kernel NULL pointer dereference, address: 0000000000000058 [ 271.998215] #PF: supervisor read access in kernel mode [ 272.003351] #PF: error_code(0x0000) - not-present page [ 272.008485] PGD 0 P4D 0 [ 272.011022] Oops: Oops: 0000 [#1] SMP NOPTI [ 272.015207] CPU: 0 UID: 0 PID: 3859 Comm: insmod Tainted: G S 6.15.0-rc1-00004-g44722359ed83 #30 PREEMPT(full) 3c7fb39a552e7d949de2ad921a7d6588d3a4fdc5 [ 272.030312] Tainted: [S]=CPU_OUT_OF_SPEC [ 272.034233] Hardware name: HP Berknip/Berknip, BIOS Google_Berknip.13434.356.0 05/17/2021 [ 272.042400] RIP: 0010:ec_i2c_probe+0x2b/0x1c0 [i2c_cros_ec_tunnel] [ 272.048577] Code: 1f 44 00 00 41 57 41 56 41 55 41 54 53 48 83 ec 10 65 48 8b 05 06 a0 6c e7 48 89 44 24 08 4c 8d 7f 10 48 8b 47 50 4c 8b 60 78 <49> 83 7c 24 58 00 0f 84 2f 01 00 00 48 89 fb be 30 06 00 00 4c 9 [ 272.067317] RSP: 0018:ffffa32082a03940 EFLAGS: 00010282 [ 272.072541] RAX: ffff969580b6a810 RBX: ffff969580b68c10 RCX: 0000000000000000 [ 272.079672] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff969580b68c00 [ 272.086804] RBP: 00000000fffffdfb R08: 0000000000000000 R09: 0000000000000000 [ 272.093936] R10: 0000000000000000 R11: ffffffffc0600000 R12: 0000000000000000 [ 272.101067] R13: ffffffffa666fbb8 R14: ffffffffc05b5528 R15: ffff969580b68c10 [ 272.108198] FS: 00007b930906fc40(0000) GS:ffff969603149000(0000) knlGS:0000000000000000 [ 272.116282] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 272.122024] CR2: 0000000000000058 CR3: 000000012631c000 CR4: 00000000003506f0 [ 272.129155] Call Trace: [ 272.131606] <TASK> [ 272.133709] ? acpi_dev_pm_attach+0xdd/0x110 [ 272.137985] platform_probe+0x69/0xa0 [ 272.141652] really_probe+0x152/0x310 [ 272.145318] __driver_probe_device+0x77/0x110 [ 272.149678] driver_probe_device+0x1e/0x190 [ 272.153864] __driver_attach+0x10b/0x1e0 [ 272.157790] ? driver_attach+0x20/0x20 [ 272.161542] bus_for_each_dev+0x107/0x150 [ 272.165553] bus_add_driver+0x15d/0x270 [ 272.169392] driver_register+0x65/0x110 [ 272.173232] ? cleanup_module+0xa80/0xa80 [i2c_cros_ec_tunnel 3a00532f3f4af4a9eade753f86b0f8dd4e4e5698] [ 272.182617] do_one_initcall+0x110/0x350 [ 272.186543] ? security_kernfs_init_security+0x49/0xd0 [ 272.191682] ? __kernfs_new_node+0x1b9/0x240 [ 272.195954] ? security_kernfs_init_security+0x49/0xd0 [ 272.201093] ? __kernfs_new_node+0x1b9/0x240 [ 272.205365] ? kernfs_link_sibling+0x105/0x130 [ 272.209810] ? kernfs_next_descendant_post+0x1c/0xa0 [ 272.214773] ? kernfs_activate+0x57/0x70 [ 272.218699] ? kernfs_add_one+0x118/0x160 [ 272.222710] ? __kernfs_create_file+0x71/0xa0 [ 272.227069] ? sysfs_add_bin_file_mode_ns+0xd6/0x110 [ 272.232033] ? internal_create_group+0x453/0x4a0 [ 272.236651] ? __vunmap_range_noflush+0x214/0x2d0 [ 272.241355] ? __free_frozen_pages+0x1dc/0x420 [ 272.245799] ? free_vmap_area_noflush+0x10a/0x1c0 [ 272.250505] ? load_module+0x1509/0x16f0 [ 272.254431] do_init_module+0x60/0x230 [ 272.258181] __se_sys_finit_module+0x27a/0x370 [ 272.262627] do_syscall_64+0x6a/0xf0 [ 272.266206] ? do_syscall_64+0x76/0xf0 [ 272.269956] ? irqentry_exit_to_user_mode+0x79/0x90 [ 272.274836] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 272.279887] RIP: 0033:0x7b9309168d39 [ 272.283466] Code: 5b 41 5c 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d af 40 0c 00 f7 d8 64 89 01 8 [ 272.302210] RSP: 002b:00007fff50f1a288 EFLAGS: 00000246 ORIG_RAX: 000 ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37781.html
  CVE-2025-37781
• https://bugzilla.suse.com/1242575
  SUSE Bug 1242575

Описание

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37782.html
  CVE-2025-37782
• https://bugzilla.suse.com/1242770
  SUSE Bug 1242770

Описание

In the Linux kernel, the following vulnerability has been resolved: net: dsa: free routing table on probe failure If complete = true in dsa_tree_setup(), it means that we are the last switch of the tree which is successfully probing, and we should be setting up all switches from our probe path. After "complete" becomes true, dsa_tree_setup_cpu_ports() or any subsequent function may fail. If that happens, the entire tree setup is in limbo: the first N-1 switches have successfully finished probing (doing nothing but having allocated persistent memory in the tree's dst->ports, and maybe dst->rtable), and switch N failed to probe, ending the tree setup process before anything is tangible from the user's PoV. If switch N fails to probe, its memory (ports) will be freed and removed from dst->ports. However, the dst->rtable elements pointing to its ports, as created by dsa_link_touch(), will remain there, and will lead to use-after-free if dereferenced. If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely possible because that is where ds->ops->setup() is, we get a kasan report like this: ================================================================== BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568 Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42 Call trace: __asan_report_load8_noabort+0x20/0x30 mv88e6xxx_setup_upstream_port+0x240/0x568 mv88e6xxx_setup+0xebc/0x1eb0 dsa_register_switch+0x1af4/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Allocated by task 42: __kasan_kmalloc+0x84/0xa0 __kmalloc_cache_noprof+0x298/0x490 dsa_switch_touch_ports+0x174/0x3d8 dsa_register_switch+0x800/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Freed by task 42: __kasan_slab_free+0x48/0x68 kfree+0x138/0x418 dsa_register_switch+0x2694/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 The simplest way to fix the bug is to delete the routing table in its entirety. dsa_tree_setup_routing_table() has no problem in regenerating it even if we deleted links between ports other than those of switch N, because dsa_link_touch() first checks whether the port pair already exists in dst->rtable, allocating if not. The deletion of the routing table in its entirety already exists in dsa_tree_teardown(), so refactor that into a function that can also be called from the tree setup error path. In my analysis of the commit to blame, it is the one which added dsa_link elements to dst->rtable. Prior to that, each switch had its own ds->rtable which is freed when the switch fails to probe. But the tree is potentially persistent memory.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37786.html
  CVE-2025-37786
• https://bugzilla.suse.com/1242725
  SUSE Bug 1242725

Описание

In the Linux kernel, the following vulnerability has been resolved: cxgb4: fix memory leak in cxgb4_init_ethtool_filters() error path In the for loop used to allocate the loc_array and bmap for each port, a memory leak is possible when the allocation for loc_array succeeds, but the allocation for bmap fails. This is because when the control flow goes to the label free_eth_finfo, only the allocations starting from (i-1)th iteration are freed. Fix that by freeing the loc_array in the bmap allocation error path.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37788.html
  CVE-2025-37788
• https://bugzilla.suse.com/1242766
  SUSE Bug 1242766

Описание

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: Prevent potential NULL dereference The btrtl_initialize() function checks that rtl_load_file() either had an error or it loaded a zero length file. However, if it loaded a zero length file then the error code is not set correctly. It results in an error pointer vs NULL bug, followed by a NULL pointer dereference. This was detected by Smatch: drivers/bluetooth/btrtl.c:592 btrtl_initialize() warn: passing zero to 'ERR_PTR'

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37792.html
  CVE-2025-37792
• https://bugzilla.suse.com/1242591
  SUSE Bug 1242591

Описание

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, avs_component_probe() does not check for this case, which results in a NULL pointer dereference.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37793.html
  CVE-2025-37793
• https://bugzilla.suse.com/1242584
  SUSE Bug 1242584

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Purge vif txq in ieee80211_do_stop() After ieee80211_do_stop() SKB from vif's txq could still be processed. Indeed another concurrent vif schedule_and_wake_txq call could cause those packets to be dequeued (see ieee80211_handle_wake_tx_queue()) without checking the sdata current state. Because vif.drv_priv is now cleared in this function, this could lead to driver crash. For example in ath12k, ahvif is store in vif.drv_priv. Thus if ath12k_mac_op_tx() is called after ieee80211_do_stop(), ahvif->ah can be NULL, leading the ath12k_warn(ahvif->ah,...) call in this function to trigger the NULL deref below. Unable to handle kernel paging request at virtual address dfffffc000000001 KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] batman_adv: bat0: Interface deactivated: brbh1337 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfffffc000000001] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] SMP CPU: 1 UID: 0 PID: 978 Comm: lbd Not tainted 6.13.0-g633f875b8f1e #114 Hardware name: HW (DT) pstate: 10000005 (nzcV daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] lr : ath12k_mac_op_tx+0x174/0x29b8 [ath12k] sp : ffffffc086ace450 x29: ffffffc086ace450 x28: 0000000000000000 x27: 1ffffff810d59ca4 x26: ffffff801d05f7c0 x25: 0000000000000000 x24: 000000004000001e x23: ffffff8009ce4926 x22: ffffff801f9c0800 x21: ffffff801d05f7f0 x20: ffffff8034a19f40 x19: 0000000000000000 x18: ffffff801f9c0958 x17: ffffff800bc0a504 x16: dfffffc000000000 x15: ffffffc086ace4f8 x14: ffffff801d05f83c x13: 0000000000000000 x12: ffffffb003a0bf03 x11: 0000000000000000 x10: ffffffb003a0bf02 x9 : ffffff8034a19f40 x8 : ffffff801d05f818 x7 : 1ffffff0069433dc x6 : ffffff8034a19ee0 x5 : ffffff801d05f7f0 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000008 Call trace: ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] (P) ieee80211_handle_wake_tx_queue+0x16c/0x260 ieee80211_queue_skb+0xeec/0x1d20 ieee80211_tx+0x200/0x2c8 ieee80211_xmit+0x22c/0x338 __ieee80211_subif_start_xmit+0x7e8/0xc60 ieee80211_subif_start_xmit+0xc4/0xee0 __ieee80211_subif_start_xmit_8023.isra.0+0x854/0x17a0 ieee80211_subif_start_xmit_8023+0x124/0x488 dev_hard_start_xmit+0x160/0x5a8 __dev_queue_xmit+0x6f8/0x3120 br_dev_queue_push_xmit+0x120/0x4a8 __br_forward+0xe4/0x2b0 deliver_clone+0x5c/0xd0 br_flood+0x398/0x580 br_dev_xmit+0x454/0x9f8 dev_hard_start_xmit+0x160/0x5a8 __dev_queue_xmit+0x6f8/0x3120 ip6_finish_output2+0xc28/0x1b60 __ip6_finish_output+0x38c/0x638 ip6_output+0x1b4/0x338 ip6_local_out+0x7c/0xa8 ip6_send_skb+0x7c/0x1b0 ip6_push_pending_frames+0x94/0xd0 rawv6_sendmsg+0x1a98/0x2898 inet_sendmsg+0x94/0xe0 __sys_sendto+0x1e4/0x308 __arm64_sys_sendto+0xc4/0x140 do_el0_svc+0x110/0x280 el0_svc+0x20/0x60 el0t_64_sync_handler+0x104/0x138 el0t_64_sync+0x154/0x158 To avoid that, empty vif's txq at ieee80211_do_stop() so no packet could be dequeued after ieee80211_do_stop() (new packets cannot be queued because SDATA_STATE_RUNNING is cleared at this point).

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37794.html
  CVE-2025-37794
• https://bugzilla.suse.com/1242566
  SUSE Bug 1242566

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: at76c50x: fix use after free access in at76_disconnect The memory pointed to by priv is freed at the end of at76_delete_device function (using ieee80211_free_hw). But the code then accesses the udev field of the freed object to put the USB device. This may also lead to a memory leak of the usb device. Fix this by using udev from interface.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37796.html
  CVE-2025-37796
• https://bugzilla.suse.com/1242727
  SUSE Bug 1242727

Описание

In the Linux kernel, the following vulnerability has been resolved: codel: remove sch->q.qlen check before qdisc_tree_reduce_backlog() After making all ->qlen_notify() callbacks idempotent, now it is safe to remove the check of qlen!=0 from both fq_codel_dequeue() and codel_qdisc_dequeue().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37798.html
  CVE-2025-37798
• https://bugzilla.suse.com/1242414
  SUSE Bug 1242414
• https://bugzilla.suse.com/1242417
  SUSE Bug 1242417

Описание

In the Linux kernel, the following vulnerability has been resolved: driver core: fix potential NULL pointer dereference in dev_uevent() If userspace reads "uevent" device attribute at the same time as another threads unbinds the device from its driver, change to dev->driver from a valid pointer to NULL may result in crash. Fix this by using READ_ONCE() when fetching the pointer, and take bus' drivers klist lock to make sure driver instance will not disappear while we access it. Use WRITE_ONCE() when setting the driver pointer to ensure there is no tearing.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37800.html
  CVE-2025-37800
• https://bugzilla.suse.com/1242849
  SUSE Bug 1242849

Описание

In the Linux kernel, the following vulnerability has been resolved: spi: spi-imx: Add check for spi_imx_setupxfer() Add check for the return value of spi_imx_setupxfer(). spi_imx->rx and spi_imx->tx function pointer can be NULL when spi_imx_setupxfer() return error, and make NULL pointer dereference. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: 0x0 spi_imx_pio_transfer+0x50/0xd8 spi_imx_transfer_one+0x18c/0x858 spi_transfer_one_message+0x43c/0x790 __spi_pump_transfer_message+0x238/0x5d4 __spi_sync+0x2b0/0x454 spi_write_then_read+0x11c/0x200

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37801.html
  CVE-2025-37801
• https://bugzilla.suse.com/1242850
  SUSE Bug 1242850

Описание

In the Linux kernel, the following vulnerability has been resolved: sound/virtio: Fix cancel_sync warnings on uninitialized work_structs Betty reported hitting the following warning: [ 8.709131][ T221] WARNING: CPU: 2 PID: 221 at kernel/workqueue.c:4182 ... [ 8.713282][ T221] Call trace: [ 8.713365][ T221] __flush_work+0x8d0/0x914 [ 8.713468][ T221] __cancel_work_sync+0xac/0xfc [ 8.713570][ T221] cancel_work_sync+0x24/0x34 [ 8.713667][ T221] virtsnd_remove+0xa8/0xf8 [virtio_snd ab15f34d0dd772f6d11327e08a81d46dc9c36276] [ 8.713868][ T221] virtsnd_probe+0x48c/0x664 [virtio_snd ab15f34d0dd772f6d11327e08a81d46dc9c36276] [ 8.714035][ T221] virtio_dev_probe+0x28c/0x390 [ 8.714139][ T221] really_probe+0x1bc/0x4c8 ... It seems we're hitting the error path in virtsnd_probe(), which triggers a virtsnd_remove() which iterates over the substreams calling cancel_work_sync() on the elapsed_period work_struct. Looking at the code, from earlier in: virtsnd_probe()->virtsnd_build_devs()->virtsnd_pcm_parse_cfg() We set snd->nsubstreams, allocate the snd->substreams, and if we then hit an error on the info allocation or something in virtsnd_ctl_query_info() fails, we will exit without having initialized the elapsed_period work_struct. When that error path unwinds we then call virtsnd_remove() which as long as the substreams array is allocated, will iterate through calling cancel_work_sync() on the uninitialized work struct hitting this warning. Takashi Iwai suggested this fix, which initializes the substreams structure right after allocation, so that if we hit the error paths we avoid trying to cleanup uninitialized data. Note: I have not yet managed to reproduce the issue myself, so this patch has had limited testing. Feedback or thoughts would be appreciated!

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37805.html
  CVE-2025-37805
• https://bugzilla.suse.com/1242930
  SUSE Bug 1242930

Описание

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: check that event count does not exceed event buffer length The event count is read from register DWC3_GEVNTCOUNT. There is a check for the count being zero, but not for exceeding the event buffer length. Check that event count does not exceed event buffer length, avoiding an out-of-bounds access when memcpy'ing the event. Crash log: Unable to handle kernel paging request at virtual address ffffffc0129be000 pc : __memcpy+0x114/0x180 lr : dwc3_check_event_buf+0xec/0x348 x3 : 0000000000000030 x2 : 000000000000dfc4 x1 : ffffffc0129be000 x0 : ffffff87aad60080 Call trace: __memcpy+0x114/0x180 dwc3_interrupt+0x24/0x34

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37810.html
  CVE-2025-37810
• https://bugzilla.suse.com/1242906
  SUSE Bug 1242906

Описание

In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: ci_hdrc_imx: fix usbmisc handling usbmisc is an optional device property so it is totally valid for the corresponding data->usbmisc_data to have a NULL value. Check that before dereferencing the pointer. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37811.html
  CVE-2025-37811
• https://bugzilla.suse.com/1242907
  SUSE Bug 1242907

Описание

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: Fix deadlock when using NCM gadget The cdns3 driver has the same NCM deadlock as fixed in cdnsp by commit 58f2fcb3a845 ("usb: cdnsp: Fix deadlock issue during using NCM gadget"). Under PREEMPT_RT the deadlock can be readily triggered by heavy network traffic, for example using "iperf --bidir" over NCM ethernet link. The deadlock occurs because the threaded interrupt handler gets preempted by a softirq, but both are protected by the same spinlock. Prevent deadlock by disabling softirq during threaded irq handler.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37812.html
  CVE-2025-37812
• https://bugzilla.suse.com/1242908
  SUSE Bug 1242908

Описание

In the Linux kernel, the following vulnerability has been resolved: misc: microchip: pci1xxxx: Fix Kernel panic during IRQ handler registration Resolve kernel panic while accessing IRQ handler associated with the generated IRQ. This is done by acquiring the spinlock and storing the current interrupt state before handling the interrupt request using generic_handle_irq. A previous fix patch was submitted where 'generic_handle_irq' was replaced with 'handle_nested_irq'. However, this change also causes the kernel panic where after determining which GPIO triggered the interrupt and attempting to call handle_nested_irq with the mapped IRQ number, leads to a failure in locating the registered handler.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37815.html
  CVE-2025-37815
• https://bugzilla.suse.com/1242871
  SUSE Bug 1242871

Описание

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode() With ACPI in place, gicv2m_get_fwnode() is registered with the pci subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime during a PCI host bridge probe. But, the call back is wrongly marked as __init, causing it to be freed, while being registered with the PCI subsystem and could trigger: Unable to handle kernel paging request at virtual address ffff8000816c0400 gicv2m_get_fwnode+0x0/0x58 (P) pci_set_bus_msi_domain+0x74/0x88 pci_register_host_bridge+0x194/0x548 This is easily reproducible on a Juno board with ACPI boot. Retain the function for later use.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37819.html
  CVE-2025-37819
• https://bugzilla.suse.com/1242873
  SUSE Bug 1242873

Описание

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix reference leak in pci_register_host_bridge() If device_register() fails, call put_device() to give up the reference to avoid a memory leak, per the comment at device_register(). Found by code review. [bhelgaas: squash Dan Carpenter's double free fix from https://lore.kernel.org/r/db806a6c-a91b-4e5a-a84b-6b7e01bdac85@stanley.mountain]

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37836.html
  CVE-2025-37836
• https://bugzilla.suse.com/1242957
  SUSE Bug 1242957

Описание

In the Linux kernel, the following vulnerability has been resolved: jbd2: remove wrong sb->s_sequence check Journal emptiness is not determined by sb->s_sequence == 0 but rather by sb->s_start == 0 (which is set a few lines above). Furthermore 0 is a valid transaction ID so the check can spuriously trigger. Remove the invalid WARN_ON.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37839.html
  CVE-2025-37839
• https://bugzilla.suse.com/1242990
  SUSE Bug 1242990

Описание

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: fix PM resume warning Fixed warning on PM resume as shown below caused due to uninitialized struct nand_operation that checks chip select field : WARN_ON(op->cs >= nanddev_ntargets(&chip->base) [ 14.588522] ------------[ cut here ]------------ [ 14.588529] WARNING: CPU: 0 PID: 1392 at drivers/mtd/nand/raw/internals.h:139 nand_reset_op+0x1e0/0x1f8 [ 14.588553] Modules linked in: bdc udc_core [ 14.588579] CPU: 0 UID: 0 PID: 1392 Comm: rtcwake Tainted: G W 6.14.0-rc4-g5394eea10651 #16 [ 14.588590] Tainted: [W]=WARN [ 14.588593] Hardware name: Broadcom STB (Flattened Device Tree) [ 14.588598] Call trace: [ 14.588604] dump_backtrace from show_stack+0x18/0x1c [ 14.588622] r7:00000009 r6:0000008b r5:60000153 r4:c0fa558c [ 14.588625] show_stack from dump_stack_lvl+0x70/0x7c [ 14.588639] dump_stack_lvl from dump_stack+0x18/0x1c [ 14.588653] r5:c08d40b0 r4:c1003cb0 [ 14.588656] dump_stack from __warn+0x84/0xe4 [ 14.588668] __warn from warn_slowpath_fmt+0x18c/0x194 [ 14.588678] r7:c08d40b0 r6:c1003cb0 r5:00000000 r4:00000000 [ 14.588681] warn_slowpath_fmt from nand_reset_op+0x1e0/0x1f8 [ 14.588695] r8:70c40dff r7:89705f41 r6:36b4a597 r5:c26c9444 r4:c26b0048 [ 14.588697] nand_reset_op from brcmnand_resume+0x13c/0x150 [ 14.588714] r9:00000000 r8:00000000 r7:c24f8010 r6:c228a3f8 r5:c26c94bc r4:c26b0040 [ 14.588717] brcmnand_resume from platform_pm_resume+0x34/0x54 [ 14.588735] r5:00000010 r4:c0840a50 [ 14.588738] platform_pm_resume from dpm_run_callback+0x5c/0x14c [ 14.588757] dpm_run_callback from device_resume+0xc0/0x324 [ 14.588776] r9:c24f8054 r8:c24f80a0 r7:00000000 r6:00000000 r5:00000010 r4:c24f8010 [ 14.588779] device_resume from dpm_resume+0x130/0x160 [ 14.588799] r9:c22539e4 r8:00000010 r7:c22bebb0 r6:c24f8010 r5:c22539dc r4:c22539b0 [ 14.588802] dpm_resume from dpm_resume_end+0x14/0x20 [ 14.588822] r10:c2204e40 r9:00000000 r8:c228a3fc r7:00000000 r6:00000003 r5:c228a414 [ 14.588826] r4:00000010 [ 14.588828] dpm_resume_end from suspend_devices_and_enter+0x274/0x6f8 [ 14.588848] r5:c228a414 r4:00000000 [ 14.588851] suspend_devices_and_enter from pm_suspend+0x228/0x2bc [ 14.588868] r10:c3502910 r9:c3501f40 r8:00000004 r7:c228a438 r6:c0f95e18 r5:00000000 [ 14.588871] r4:00000003 [ 14.588874] pm_suspend from state_store+0x74/0xd0 [ 14.588889] r7:c228a438 r6:c0f934c8 r5:00000003 r4:00000003 [ 14.588892] state_store from kobj_attr_store+0x1c/0x28 [ 14.588913] r9:00000000 r8:00000000 r7:f09f9f08 r6:00000004 r5:c3502900 r4:c0283250 [ 14.588916] kobj_attr_store from sysfs_kf_write+0x40/0x4c [ 14.588936] r5:c3502900 r4:c0d92a48 [ 14.588939] sysfs_kf_write from kernfs_fop_write_iter+0x104/0x1f0 [ 14.588956] r5:c3502900 r4:c3501f40 [ 14.588960] kernfs_fop_write_iter from vfs_write+0x250/0x420 [ 14.588980] r10:c0e14b48 r9:00000000 r8:c25f5780 r7:00443398 r6:f09f9f68 r5:c34f7f00 [ 14.588983] r4:c042a88c [ 14.588987] vfs_write from ksys_write+0x74/0xe4 [ 14.589005] r10:00000004 r9:c25f5780 r8:c02002fA0 r7:00000000 r6:00000000 r5:c34f7f00 [ 14.589008] r4:c34f7f00 [ 14.589011] ksys_write from sys_write+0x10/0x14 [ 14.589029] r7:00000004 r6:004421c0 r5:00443398 r4:00000004 [ 14.589032] sys_write from ret_fast_syscall+0x0/0x5c [ 14.589044] Exception stack(0xf09f9fa8 to 0xf09f9ff0) [ 14.589050] 9fa0: 00000004 00443398 00000004 00443398 00000004 00000001 [ 14.589056] 9fc0: 00000004 00443398 004421c0 00000004 b6ecbd58 00000008 bebfbc38 0043eb78 [ 14.589062] 9fe0: 00440eb0 bebfbaf8 b6de18a0 b6e579e8 [ 14.589065] ---[ end trace 0000000000000000 ]--- The fix uses the higher level nand_reset(chip, chipnr); where chipnr = 0, when doing PM resume operation in compliance with the controller support for single die nand chip. Switching from nand_reset_op() to nan ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37840.html
  CVE-2025-37840
• https://bugzilla.suse.com/1242953
  SUSE Bug 1242953

Описание

In the Linux kernel, the following vulnerability has been resolved: pm: cpupower: bench: Prevent NULL dereference on malloc failure If malloc returns NULL due to low memory, 'config' pointer can be NULL. Add a check to prevent NULL dereference.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37841.html
  CVE-2025-37841
• https://bugzilla.suse.com/1242974
  SUSE Bug 1242974

Описание

In the Linux kernel, the following vulnerability has been resolved: cifs: avoid NULL pointer dereference in dbg call cifs_server_dbg() implies server to be non-NULL so move call under condition to avoid NULL pointer dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37844.html
  CVE-2025-37844
• https://bugzilla.suse.com/1242946
  SUSE Bug 1242946

Описание

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Tear down vGIC on failed vCPU creation If kvm_arch_vcpu_create() fails to share the vCPU page with the hypervisor, we propagate the error back to the ioctl but leave the vGIC vCPU data initialised. Note only does this leak the corresponding memory when the vCPU is destroyed but it can also lead to use-after-free if the redistributor device handling tries to walk into the vCPU. Add the missing cleanup to kvm_arch_vcpu_create(), ensuring that the vGIC vCPU structures are destroyed on error.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37849.html
  CVE-2025-37849
• https://bugzilla.suse.com/1243000
  SUSE Bug 1243000

Описание

In the Linux kernel, the following vulnerability has been resolved: pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config() With CONFIG_COMPILE_TEST && !CONFIG_HAVE_CLK, pwm_mediatek_config() has a divide-by-zero in the following line: do_div(resolution, clk_get_rate(pc->clk_pwms[pwm->hwpwm])); due to the fact that the !CONFIG_HAVE_CLK version of clk_get_rate() returns zero. This is presumably just a theoretical problem: COMPILE_TEST overrides the dependency on RALINK which would select COMMON_CLK. Regardless it's a good idea to check for the error explicitly to avoid divide-by-zero. Fixes the following warning: drivers/pwm/pwm-mediatek.o: warning: objtool: .text: unexpected end of section [ukleinek: s/CONFIG_CLK/CONFIG_HAVE_CLK/]

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37850.html
  CVE-2025-37850
• https://bugzilla.suse.com/1242955
  SUSE Bug 1242955

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: omapfb: Add 'plane' value check Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB of the enum parameter plane. The value of this parameter is initialized in dss_init_overlays and in the current state of the code it cannot take this value so it's not a real problem. For the purposes of defensive coding it wouldn't be superfluous to check the parameter value, because some functions down the call stack process this value correctly and some not. For example, in dispc_ovl_setup_global_alpha it may lead to buffer overflow. Add check for this value. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37851.html
  CVE-2025-37851
• https://bugzilla.suse.com/1242977
  SUSE Bug 1242977

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: handle amdgpu_cgs_create_device() errors in amd_powerplay_create() Add error handling to propagate amdgpu_cgs_create_device() failures to the caller. When amdgpu_cgs_create_device() fails, release hwmgr and return -ENOMEM to prevent null pointer dereference. [v1]->[v2]: Change error code from -EINVAL to -ENOMEM. Free hwmgr.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37852.html
  CVE-2025-37852
• https://bugzilla.suse.com/1243074
  SUSE Bug 1243074

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: debugfs hang_hws skip GPU with MES debugfs hang_hws is used by GPU reset test with HWS, for MES this crash the kernel with NULL pointer access because dqm->packet_mgr is not setup for MES path. Skip GPU with MES for now, MES hang_hws debugfs interface will be supported later.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37853.html
  CVE-2025-37853
• https://bugzilla.suse.com/1243076
  SUSE Bug 1243076

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix mode1 reset crash issue If HW scheduler hangs and mode1 reset is used to recover GPU, KFD signal user space to abort the processes. After process abort exit, user queues still use the GPU to access system memory before h/w is reset while KFD cleanup worker free system memory and free VRAM. There is use-after-free race bug that KFD allocate and reuse the freed system memory, and user queue write to the same system memory to corrupt the data structure and cause driver crash. To fix this race, KFD cleanup worker terminate user queues, then flush reset_domain wq to wait for any GPU ongoing reset complete, and then free outstanding BOs.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37854.html
  CVE-2025-37854
• https://bugzilla.suse.com/1243082
  SUSE Bug 1243082

Описание

In the Linux kernel, the following vulnerability has been resolved: btrfs: harden block_group::bg_list against list_del() races As far as I can tell, these calls of list_del_init() on bg_list cannot run concurrently with btrfs_mark_bg_unused() or btrfs_mark_bg_to_reclaim(), as they are in transaction error paths and situations where the block group is readonly. However, if there is any chance at all of racing with mark_bg_unused(), or a different future user of bg_list, better to be safe than sorry. Otherwise we risk the following interleaving (bg_list refcount in parens) T1 (some random op) T2 (btrfs_mark_bg_unused) !list_empty(&bg->bg_list); (1) list_del_init(&bg->bg_list); (1) list_move_tail (1) btrfs_put_block_group (0) btrfs_delete_unused_bgs bg = list_first_entry list_del_init(&bg->bg_list); btrfs_put_block_group(bg); (-1) Ultimately, this results in a broken ref count that hits zero one deref early and the real final deref underflows the refcount, resulting in a WARNING.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37856.html
  CVE-2025-37856
• https://bugzilla.suse.com/1243068
  SUSE Bug 1243068

Описание

In the Linux kernel, the following vulnerability has been resolved: fs/jfs: Prevent integer overflow in AG size calculation The JFS filesystem calculates allocation group (AG) size using 1 << l2agsize in dbExtendFS(). When l2agsize exceeds 31 (possible with >2TB aggregates on 32-bit systems), this 32-bit shift operation causes undefined behavior and improper AG sizing. On 32-bit architectures: - Left-shifting 1 by 32+ bits results in 0 due to integer overflow - This creates invalid AG sizes (0 or garbage values) in sbi->bmap->db_agsize - Subsequent block allocations would reference invalid AG structures - Could lead to: - Filesystem corruption during extend operations - Kernel crashes due to invalid memory accesses - Security vulnerabilities via malformed on-disk structures Fix by casting to s64 before shifting: bmp->db_agsize = (s64)1 << l2agsize; This ensures 64-bit arithmetic even on 32-bit architectures. The cast matches the data type of db_agsize (s64) and follows similar patterns in JFS block calculation code. Found by Linux Verification Center (linuxtesting.org) with SVACE.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37858.html
  CVE-2025-37858
• https://bugzilla.suse.com/1243049
  SUSE Bug 1243049

Описание

In the Linux kernel, the following vulnerability has been resolved: page_pool: avoid infinite loop to schedule delayed worker We noticed the kworker in page_pool_release_retry() was waken up repeatedly and infinitely in production because of the buggy driver causing the inflight less than 0 and warning us in page_pool_inflight()[1]. Since the inflight value goes negative, it means we should not expect the whole page_pool to get back to work normally. This patch mitigates the adverse effect by not rescheduling the kworker when detecting the inflight negative in page_pool_release_retry(). [1] [Mon Feb 10 20:36:11 2025] ------------[ cut here ]------------ [Mon Feb 10 20:36:11 2025] Negative(-51446) inflight packet-pages ... [Mon Feb 10 20:36:11 2025] Call Trace: [Mon Feb 10 20:36:11 2025] page_pool_release_retry+0x23/0x70 [Mon Feb 10 20:36:11 2025] process_one_work+0x1b1/0x370 [Mon Feb 10 20:36:11 2025] worker_thread+0x37/0x3a0 [Mon Feb 10 20:36:11 2025] kthread+0x11a/0x140 [Mon Feb 10 20:36:11 2025] ? process_one_work+0x370/0x370 [Mon Feb 10 20:36:11 2025] ? __kthread_cancel_work+0x40/0x40 [Mon Feb 10 20:36:11 2025] ret_from_fork+0x35/0x40 [Mon Feb 10 20:36:11 2025] ---[ end trace ebffe800f33e7e34 ]--- Note: before this patch, the above calltrace would flood the dmesg due to repeated reschedule of release_dw kworker.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37859.html
  CVE-2025-37859
• https://bugzilla.suse.com/1243051
  SUSE Bug 1243051

Описание

In the Linux kernel, the following vulnerability has been resolved: HID: pidff: Fix null pointer dereference in pidff_find_fields This function triggered a null pointer dereference if used to search for a report that isn't implemented on the device. This happened both for optional and required reports alike. The same logic was applied to pidff_find_special_field and although pidff_init_fields should return an error earlier if one of the required reports is missing, future modifications could change this logic and resurface this possible null pointer dereference again. LKML bug report: https://lore.kernel.org/all/CAL-gK7f5=R0nrrQdPtaZZr1fd-cdAMbDMuZ_NLA8vM0SX+nGSw@mail.gmail.com

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37862.html
  CVE-2025-37862
• https://bugzilla.suse.com/1242982
  SUSE Bug 1242982

Описание

In the Linux kernel, the following vulnerability has been resolved: net: dsa: clean up FDB, MDB, VLAN entries on unbind As explained in many places such as commit b117e1e8a86d ("net: dsa: delete dsa_legacy_fdb_add and dsa_legacy_fdb_del"), DSA is written given the assumption that higher layers have balanced additions/deletions. As such, it only makes sense to be extremely vocal when those assumptions are violated and the driver unbinds with entries still present. But Ido Schimmel points out a very simple situation where that is wrong: https://lore.kernel.org/netdev/ZDazSM5UsPPjQuKr@shredder/ (also briefly discussed by me in the aforementioned commit). Basically, while the bridge bypass operations are not something that DSA explicitly documents, and for the majority of DSA drivers this API simply causes them to go to promiscuous mode, that isn't the case for all drivers. Some have the necessary requirements for bridge bypass operations to do something useful - see dsa_switch_supports_uc_filtering(). Although in tools/testing/selftests/net/forwarding/local_termination.sh, we made an effort to popularize better mechanisms to manage address filters on DSA interfaces from user space - namely macvlan for unicast, and setsockopt(IP_ADD_MEMBERSHIP) - through mtools - for multicast, the fact is that 'bridge fdb add ... self static local' also exists as kernel UAPI, and might be useful to someone, even if only for a quick hack. It seems counter-productive to block that path by implementing shim .ndo_fdb_add and .ndo_fdb_del operations which just return -EOPNOTSUPP in order to prevent the ndo_dflt_fdb_add() and ndo_dflt_fdb_del() from running, although we could do that. Accepting that cleanup is necessary seems to be the only option. Especially since we appear to be coming back at this from a different angle as well. Russell King is noticing that the WARN_ON() triggers even for VLANs: https://lore.kernel.org/netdev/Z_li8Bj8bD4-BYKQ@shell.armlinux.org.uk/ What happens in the bug report above is that dsa_port_do_vlan_del() fails, then the VLAN entry lingers on, and then we warn on unbind and leak it. This is not a straight revert of the blamed commit, but we now add an informational print to the kernel log (to still have a way to see that bugs exist), and some extra comments gathered from past years' experience, to justify the logic.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37864.html
  CVE-2025-37864
• https://bugzilla.suse.com/1242965
  SUSE Bug 1242965

Описание

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported Russell King reports that on the ZII dev rev B, deleting a bridge VLAN from a user port fails with -ENOENT: https://lore.kernel.org/netdev/Z_lQXNP0s5-IiJzd@shell.armlinux.org.uk/ This comes from mv88e6xxx_port_vlan_leave() -> mv88e6xxx_mst_put(), which tries to find an MST entry in &chip->msts associated with the SID, but fails and returns -ENOENT as such. But we know that this chip does not support MST at all, so that is not surprising. The question is why does the guard in mv88e6xxx_mst_put() not exit early: if (!sid) return 0; And the answer seems to be simple: the sid comes from vlan.sid which supposedly was previously populated by mv88e6xxx_vtu_get(). But some chip->info->ops->vtu_getnext() implementations do not populate vlan.sid, for example see mv88e6185_g1_vtu_getnext(). In that case, later in mv88e6xxx_port_vlan_leave() we are using a garbage sid which is just residual stack memory. Testing for sid == 0 covers all cases of a non-bridge VLAN or a bridge VLAN mapped to the default MSTI. For some chips, SID 0 is valid and installed by mv88e6xxx_stu_setup(). A chip which does not support the STU would implicitly only support mapping all VLANs to the default MSTI, so although SID 0 is not valid, it would be sufficient, if we were to zero-initialize the vlan structure, to fix the bug, due to the coincidence that a test for vlan.sid == 0 already exists and leads to the same (correct) behavior. Another option which would be sufficient would be to add a test for mv88e6xxx_has_stu() inside mv88e6xxx_mst_put(), symmetric to the one which already exists in mv88e6xxx_mst_get(). But that placement means the caller will have to dereference vlan.sid, which means it will access uninitialized memory, which is not nice even if it ignores it later. So we end up making both modifications, in order to not rely just on the sid == 0 coincidence, but also to avoid having uninitialized structure fields which might get temporarily accessed.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37865.html
  CVE-2025-37865
• https://bugzilla.suse.com/1242954
  SUSE Bug 1242954

Описание

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Silence oversized kvmalloc() warning syzkaller triggered an oversized kvmalloc() warning. Silence it by adding __GFP_NOWARN. syzkaller log: WARNING: CPU: 7 PID: 518 at mm/util.c:665 __kvmalloc_node_noprof+0x175/0x180 CPU: 7 UID: 0 PID: 518 Comm: c_repro Not tainted 6.11.0-rc6+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:__kvmalloc_node_noprof+0x175/0x180 RSP: 0018:ffffc90001e67c10 EFLAGS: 00010246 RAX: 0000000000000100 RBX: 0000000000000400 RCX: ffffffff8149d46b RDX: 0000000000000000 RSI: ffff8881030fae80 RDI: 0000000000000002 RBP: 000000712c800000 R08: 0000000000000100 R09: 0000000000000000 R10: ffffc90001e67c10 R11: 0030ae0601000000 R12: 0000000000000000 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007fde79159740(0000) GS:ffff88813bdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000105eb4005 CR4: 00000000003706b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ib_umem_odp_get+0x1f6/0x390 mlx5_ib_reg_user_mr+0x1e8/0x450 ib_uverbs_reg_mr+0x28b/0x440 ib_uverbs_write+0x7d3/0xa30 vfs_write+0x1ac/0x6c0 ksys_write+0x134/0x170 ? __sanitizer_cov_trace_pc+0x1c/0x50 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37867.html
  CVE-2025-37867
• https://bugzilla.suse.com/1242948
  SUSE Bug 1242948

Описание

In the Linux kernel, the following vulnerability has been resolved: nfsd: decrease sc_count directly if fail to queue dl_recall A deadlock warning occurred when invoking nfs4_put_stid following a failed dl_recall queue operation: T1 T2 nfs4_laundromat nfs4_get_client_reaplist nfs4_anylock_blockers __break_lease spin_lock // ctx->flc_lock spin_lock // clp->cl_lock nfs4_lockowner_has_blockers locks_owner_has_blockers spin_lock // flctx->flc_lock nfsd_break_deleg_cb nfsd_break_one_deleg nfs4_put_stid refcount_dec_and_lock spin_lock // clp->cl_lock When a file is opened, an nfs4_delegation is allocated with sc_count initialized to 1, and the file_lease holds a reference to the delegation. The file_lease is then associated with the file through kernel_setlease. The disassociation is performed in nfsd4_delegreturn via the following call chain: nfsd4_delegreturn --> destroy_delegation --> destroy_unhashed_deleg --> nfs4_unlock_deleg_lease --> kernel_setlease --> generic_delete_lease The corresponding sc_count reference will be released after this disassociation. Since nfsd_break_one_deleg executes while holding the flc_lock, the disassociation process becomes blocked when attempting to acquire flc_lock in generic_delete_lease. This means: 1) sc_count in nfsd_break_one_deleg will not be decremented to 0; 2) The nfs4_put_stid called by nfsd_break_one_deleg will not attempt to acquire cl_lock; 3) Consequently, no deadlock condition is created. Given that sc_count in nfsd_break_one_deleg remains non-zero, we can safely perform refcount_dec on sc_count directly. This approach effectively avoids triggering deadlock warnings.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37871.html
  CVE-2025-37871
• https://bugzilla.suse.com/1242949
  SUSE Bug 1242949

Описание

In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: fix missing ring index trim on error path Commit under Fixes converted tx_prod to be free running but missed masking it on the Tx error path. This crashes on error conditions, for example when DMA mapping fails.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-37873.html
  CVE-2025-37873
• https://bugzilla.suse.com/1242961
  SUSE Bug 1242961

Описание

In the Linux kernel, the following vulnerability has been resolved: net: ngbe: fix memory leak in ngbe_probe() error path When ngbe_sw_init() is called, memory is allocated for wx->rss_key in wx_init_rss_key(). However, in ngbe_probe() function, the subsequent error paths after ngbe_sw_init() don't free the rss_key. Fix that by freeing it in error path along with wx->mac_table. Also change the label to which execution jumps when ngbe_sw_init() fails, because otherwise, it could lead to a double free for rss_key, when the mac_table allocation fails in wx_sw_init().

Затронутые продукты