SUSE-SU-2026:5091-1

Описание

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2023-7356.html
  CVE-2023-7356
• https://bugzilla.suse.com/1286744
  SUSE Bug 1286744

Описание

In the Linux kernel, the following vulnerability has been resolved: NFSD: Limit the number of concurrent async COPY operations Nothing appears to limit the number of concurrent async COPY operations that clients can start. In addition, AFAICT each async COPY can copy an unlimited number of 4MB chunks, so can run for a long time. Thus IMO async COPY can become a DoS vector. Add a restriction mechanism that bounds the number of concurrent background COPY operations. Start simple and try to be fair -- this patch implements a per-namespace limit. An async COPY request that occurs while this limit is exceeded gets NFS4ERR_DELAY. The requesting client can choose to send the request again after a delay or fall back to a traditional read/write style copy. If there is need to make the mechanism more sophisticated, we can visit that in future patches.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-49974.html
  CVE-2024-49974
• https://bugzilla.suse.com/1232383
  SUSE Bug 1232383
• https://bugzilla.suse.com/1232384
  SUSE Bug 1232384

Описание

In the Linux kernel, the following vulnerability has been resolved: NFSD: Initialize struct nfsd4_copy earlier Ensure the refcount and async_copies fields are initialized early. cleanup_async_copy() will reference these fields if an error occurs in nfsd4_copy(). If they are not correctly initialized, at the very least, a refcount underflow occurs.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-50241.html
  CVE-2024-50241
• https://bugzilla.suse.com/1233187
  SUSE Bug 1233187

Описание

In the Linux kernel, the following vulnerability has been resolved: NFSD: Never decrement pending_async_copies on error The error flow in nfsd4_copy() calls cleanup_async_copy(), which already decrements nn->pending_async_copies.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2024-53073.html
  CVE-2024-53073
• https://bugzilla.suse.com/1233565
  SUSE Bug 1233565

Описание

In the Linux kernel, the following vulnerability has been resolved: media: platform: exynos4-is: Add hardware sync wait to fimc_is_hw_change_mode() In fimc_is_hw_change_mode(), the function changes camera modes without waiting for hardware completion, risking corrupted data or system hangs if subsequent operations proceed before the hardware is ready. Add fimc_is_hw_wait_intmsr0_intmsd0() after mode configuration, ensuring hardware state synchronization and stable interrupt handling.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-38237.html
  CVE-2025-38237
• https://bugzilla.suse.com/1246086
  SUSE Bug 1246086

Описание

In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: Make EEH driver device hotplug safe Multiple race conditions existed between the PCIe hotplug driver and the EEH driver, leading to a variety of kernel oopses of the same general nature: <pcie device unplug> <eeh driver trigger> <hotplug removal trigger> <pcie tree reconfiguration> <eeh recovery next step> <oops in EEH driver bus iteration loop> A second class of oops is also seen when the underlying bus disappears during device recovery. Refactor the EEH module to be PCI rescan and remove safe. Also clean up a few minor formatting / readability issues.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-38576.html
  CVE-2025-38576
• https://bugzilla.suse.com/1248354
  SUSE Bug 1248354

Описание

In the Linux kernel, the following vulnerability has been resolved: cifs: fix memory leak in smb3_fs_context_parse_param error path Add proper cleanup of ctx->source and fc->source to the cifs_parse_mount_err error handler. This ensures that memory allocated for the source strings is correctly freed on all error paths, matching the cleanup already performed in the success path by smb3_cleanup_fs_context_contents(). Pointers are also set to NULL after freeing to prevent potential double-free issues. This change fixes a memory leak originally detected by syzbot. The leak occurred when processing Opt_source mount options if an error happened after ctx->source and fc->source were successfully allocated but before the function completed. The specific leak sequence was: 1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory 2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory 3. A subsequent error jumps to cifs_parse_mount_err 4. The old error handler freed passwords but not the source strings, causing the memory to leak. This issue was not addressed by commit e8c73eb7db0a ("cifs: client: fix memory leak in smb3_fs_context_parse_param"), which only fixed leaks from repeated fsconfig() calls but not this error path. Patch updated with minor change suggested by kernel test robot

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-68219.html
  CVE-2025-68219
• https://bugzilla.suse.com/1255222
  SUSE Bug 1255222

Описание

In the Linux kernel, the following vulnerability has been resolved: Input: lkkbd - disable pending work before freeing device lkkbd_interrupt() schedules lk->tq via schedule_work(), and the work handler lkkbd_reinit() dereferences the lkkbd structure and its serio/input_dev fields. lkkbd_disconnect() and error paths in lkkbd_connect() free the lkkbd structure without preventing the reinit work from being queued again until serio_close() returns. This can allow the work handler to run after the structure has been freed, leading to a potential use-after-free. Use disable_work_sync() instead of cancel_work_sync() to ensure the reinit work cannot be re-queued, and call it both in lkkbd_disconnect() and in lkkbd_connect() error paths after serio_open().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71073.html
  CVE-2025-71073
• https://bugzilla.suse.com/1256632
  SUSE Bug 1256632

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mei: pass correct argument to function The first argument to iwl_mei_write_cyclic_buf() should be the cldev but the q_head pointer is passed instead. Fix it.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-100078.html
  CVE-2026-100078
• https://bugzilla.suse.com/1282885
  SUSE Bug 1282885

Описание

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: unregister debugfs entries on teardown ucsi_register() creates per-instance debugfs entries, but ucsi_unregister() keeps them around until ucsi_destroy(). Drivers like ucsi_glink that unregister/register the same UCSI instance across remoteproc restart then try to create an already existing debugfs directory and log: debugfs: 'pmic_glink.ucsi.0' already exists in 'ucsi' Unregister debugfs entries as part of ucsi_unregister(), and clear ucsi->debugfs after freeing it so repeated unregister paths remain safe.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-100079.html
  CVE-2026-100079
• https://bugzilla.suse.com/1282920
  SUSE Bug 1282920

Описание

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Sanitize payload size to prevent member overflow In qla27xx_copy_fpin_pkt() and qla27xx_copy_multiple_pkt(), the frame_size reported by firmware is used to calculate the copy length into item->iocb. However, the iocb member is defined as a fixed-size 64-byte array within struct purex_item. If the reported frame_size exceeds 64 bytes, subsequent memcpy calls will overflow the iocb member boundary. While extra memory might be allocated, this cross-member write is unsafe and triggers warnings under CONFIG_FORTIFY_SOURCE. Fix this by capping total_bytes to the size of the iocb member (64 bytes) before allocation and copying. This ensures all copies remain within the bounds of the destination structure member.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23059.html
  CVE-2026-23059
• https://bugzilla.suse.com/1257737
  SUSE Bug 1257737

Описание

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec nvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDU length or offset exceeds sg_cnt and then use bogus sg->length/offset values, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remaining entries, and sg->length/offset before building the bvec.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23112.html
  CVE-2026-23112
• https://bugzilla.suse.com/1258184
  SUSE Bug 1258184

Описание

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL and the default QUERY_INFO path. The QUERY_INFO branch clamps qi.input_buffer_length to the server-reported OutputBufferLength and then copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but it never verifies that the flexible-array payload actually fits within rsp_iov[1].iov_len. A malicious server can return OutputBufferLength larger than the actual QUERY_INFO response, causing copy_to_user() to walk past the response buffer and expose adjacent kernel heap to userspace. Guard the QUERY_INFO copy with a bounds check on the actual Buffer payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length) rather than an open-coded addition so the guard cannot overflow on 32-bit builds.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-31708.html
  CVE-2026-31708
• https://bugzilla.suse.com/1264022
  SUSE Bug 1264022
• https://bugzilla.suse.com/1264139
  SUSE Bug 1264139

Описание

In the Linux kernel, the following vulnerability has been resolved: smb: client: validate the whole DACL before rewriting it in cifsacl build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a server-supplied dacloffset and then use the incoming ACL to rebuild the chmod/chown security descriptor. The original fix only checked that the struct smb_acl header fits before reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate header-field OOB read, but the rewrite helpers still walk ACEs based on pdacl->num_aces with no structural validation of the incoming DACL body. A malicious server can return a truncated DACL that still contains a header, claims one or more ACEs, and then drive replace_sids_and_copy_aces() or set_chmod_dacl() past the validated extent while they compare or copy attacker-controlled ACEs. Factor the DACL structural checks into validate_dacl(), extend them to validate each ACE against the DACL bounds, and use the shared validator before the chmod/chown rebuild paths. parse_dacl() reuses the same validator so the read-side parser and write-side rewrite paths agree on what constitutes a well-formed incoming DACL.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-31709.html
  CVE-2026-31709
• https://bugzilla.suse.com/1264024
  SUSE Bug 1264024
• https://bugzilla.suse.com/1264140
  SUSE Bug 1264140

Описание

In the Linux kernel, the following vulnerability has been resolved: smb: client: require a full NFS mode SID before reading mode bits parse_dacl() treats an ACE SID matching sid_unix_NFS_mode as an NFS mode SID and reads sid.sub_auth[2] to recover the mode bits. That assumes the ACE carries three subauthorities, but compare_sids() only compares min(a, b) subauthorities. A malicious server can return an ACE with num_subauth = 2 and sub_auth[] = {88, 3}, which still matches sid_unix_NFS_mode and then drives the sub_auth[2] read four bytes past the end of the ACE. Require num_subauth >= 3 before treating the ACE as an NFS mode SID. This keeps the fix local to the special-SID mode path without changing compare_sids() semantics for the rest of cifsacl.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-43350.html
  CVE-2026-43350
• https://bugzilla.suse.com/1264985
  SUSE Bug 1264985
• https://bugzilla.suse.com/1264986
  SUSE Bug 1264986

Описание

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down context entry When tearing down a context entry, the current implementation zeros the entire 128-bit entry using multiple 64-bit writes. This creates a window where the hardware can fetch a "torn" entry - where some fields are already zeroed while the 'Present' bit is still set - leading to unpredictable behavior or spurious faults. While x86 provides strong write ordering, the compiler may reorder writes to the two 64-bit halves of the context entry. Even without compiler reordering, the hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. Align with the "Guidance to Software for Invalidations" in the VT-d spec (Section 6.5.3.3) by implementing the recommended ownership handshake: 1. Clear only the 'Present' (P) bit of the context entry first to signal the transition of ownership from hardware to software. 2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU. 3. Perform the required cache and context-cache invalidation to ensure hardware no longer has cached references to the entry. 4. Fully zero out the entry only after the invalidation is complete. Also, add a dma_wmb() to context_set_present() to ensure the entry is fully initialized before the 'Present' bit becomes visible.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-45944.html
  CVE-2026-45944
• https://bugzilla.suse.com/1267203
  SUSE Bug 1267203

Описание

In the Linux kernel, the following vulnerability has been resolved: media: rc: igorplugusb: heed coherency rules In a control request, the USB request structure can be subject to DMA on some HCs. Hence it must obey the rules for DMA coherency. Allocate it separately.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-46091.html
  CVE-2026-46091
• https://bugzilla.suse.com/1267238
  SUSE Bug 1267238

Описание

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix race between ICReq handling and queue teardown nvmet_tcp_handle_icreq() updates queue->state after sending an Initialization Connection Response (ICResp), but it does so without serializing against target-side queue teardown. If an NVMe/TCP host sends an Initialization Connection Request (ICReq) and immediately closes the connection, target-side teardown may start in softirq context before io_work drains the already buffered ICReq. In that case, nvmet_tcp_schedule_release_queue() sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue reference under state_lock. If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and allows a later socket state change to re-enter teardown and issue a second kref_put() on an already released queue. The ICResp send failure path has the same problem. If teardown has already moved the queue to DISCONNECTING, a send error can still overwrite the state with NVMET_TCP_Q_FAILED, again reopening the window for a second teardown path to drop the queue reference. Fix this by serializing both post-send state transitions with state_lock and bailing out if teardown has already started. Use -ESHUTDOWN as an internal sentinel for that bail-out path rather than propagating it as a transport error like -ECONNRESET. Keep nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before honoring that sentinel so receive-side parsing stays quiesced until the existing release path completes.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-46135.html
  CVE-2026-46135
• https://bugzilla.suse.com/1267373
  SUSE Bug 1267373
• https://bugzilla.suse.com/1267374
  SUSE Bug 1267374

Описание

In the Linux kernel, the following vulnerability has been resolved: smb/client: fix out-of-bounds read in smb2_compound_op() If a server sends a truncated response but a large OutputBufferLength, and terminates the EA list early, check_wsl_eas() returns success without validating that the entire OutputBufferLength fits within iov_len. Then smb2_compound_op() does: memcpy(idata->wsl.eas, data[0], size[0]); Where size[0] is OutputBufferLength. If iov_len is smaller than size[0], memcpy can read beyond the end of the rsp_iov allocation and leak adjacent kernel heap memory.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-46155.html
  CVE-2026-46155
• https://bugzilla.suse.com/1267720
  SUSE Bug 1267720
• https://bugzilla.suse.com/1267721
  SUSE Bug 1267721

Описание

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: fix GAIT table indexing due to double-scaling pointer arithmetic kvm_s390_pci_aif_enable(), kvm_s390_pci_aif_disable(), and aen_host_forward() index the GAIT by manually multiplying the index with sizeof(struct zpci_gaite). Since aift->gait is already a struct zpci_gaite pointer, this double-scales the offset, accessing element aisb*16 instead of aisb. This causes out-of-bounds accesses when aisb >= 32 (with ZPCI_NR_DEVICES=512) Fix by removing the erroneous sizeof multiplication.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-52968.html
  CVE-2026-52968
• https://bugzilla.suse.com/1269182
  SUSE Bug 1269182
• https://bugzilla.suse.com/1270386
  SUSE Bug 1270386

Описание

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: propagate nvmet_tcp_build_pdu_iovec() errors to its callers Currently, when nvmet_tcp_build_pdu_iovec() detects an out-of-bounds PDU length or offset, it triggers nvmet_tcp_fatal_error(cmd->queue) and returns early. However, because the function returns void, the callers are entirely unaware that a fatal error has occurred and that the cmd->recv_msg.msg_iter was left uninitialized. Callers such as nvmet_tcp_handle_h2c_data_pdu() proceed to blindly overwrite the queue state with queue->rcv_state = NVMET_TCP_RECV_DATA Consequently, the socket receiving loop may attempt to read incoming network data into the uninitialized iterator. Fix this by shifting the error handling responsibility to the callers.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-52989.html
  CVE-2026-52989
• https://bugzilla.suse.com/1269364
  SUSE Bug 1269364
• https://bugzilla.suse.com/1270382
  SUSE Bug 1270382

Описание

In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-53059.html
  CVE-2026-53059
• https://bugzilla.suse.com/1269655
  SUSE Bug 1269655
• https://bugzilla.suse.com/1270376
  SUSE Bug 1270376

Описание

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix ld_{abs,ind} failure path analysis in subprogs Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types. The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed. This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-53090.html
  CVE-2026-53090
• https://bugzilla.suse.com/1269532
  SUSE Bug 1269532

Описание

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix buffer over-read in rtw_update_protection rtw_update_protection() is called with a pointer offset into the ies buffer but the full ie_length is passed, causing a potential buffer over-read.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-53179.html
  CVE-2026-53179
• https://bugzilla.suse.com/1269264
  SUSE Bug 1269264

Описание

In the Linux kernel, the following vulnerability has been resolved: bpf: use kvfree() for replaced sysctl write buffer proc_sys_call_handler() allocates its temporary sysctl buffer with kvzalloc() and passes it to __cgroup_bpf_run_filter_sysctl(). Since kvzalloc() may fall back to vmalloc() for large allocations, freeing that buffer with kfree() is wrong and can corrupt memory. Use kvfree() to safely handle both kmalloc and kvzalloc()/vmalloc allocations. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc5. Reproduced the bug based on v7.1-rc4 in a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. To exercise the replacement path, the test tree also included the accompanying fix for the stale ret == 1 check in __cgroup_bpf_run_filter_sysctl(). The reproducer confines failslab injections to the proc_sys_call_handler() range, uses stacktrace-depth=32, and injects fail-nth=1 while writing 8191 bytes to /proc/sys/kernel/domainname from a task in the target cgroup. Under that setup, fail-nth=1 triggered the fault: BUG: unable to handle page fault for address: ffffeb0200024d48 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 SMP KASAN NOPTI CPU: 2 UID: 0 PID: 209 Comm: repro_proc_sys_ Not tainted 7.1.0-rc4-00686-g97625979a5d4 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:kfree+0x6e/0x510 ... Call Trace: <TASK> ? __cgroup_bpf_run_filter_sysctl+0x626/0xc30 __cgroup_bpf_run_filter_sysctl+0x74d/0xc30 ? __pfx___cgroup_bpf_run_filter_sysctl+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? __kvmalloc_node_noprof+0x345/0x870 ? proc_sys_call_handler+0x250/0x480 ? srso_return_thunk+0x5/0x5f proc_sys_call_handler+0x3a2/0x480 ? __pfx_proc_sys_call_handler+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? selinux_file_permission+0x39f/0x500 ? srso_return_thunk+0x5/0x5f ? lock_is_held_type+0x9e/0x120 vfs_write+0x98e/0x1000 ... </TASK> With this fix applied on top of the same test setup, rerunning the reproducer with fail-nth=1 yields no corresponding Oops reports.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-63809.html
  CVE-2026-63809
• https://bugzilla.suse.com/1272296
  SUSE Bug 1272296
• https://bugzilla.suse.com/1272624
  SUSE Bug 1272624

Описание

In the Linux kernel, the following vulnerability has been resolved: media: rc: igorplugusb: fix control request setup packet Commit eac69475b01f ("media: rc: igorplugusb: heed coherency rules") changed the control request storage from an embedded struct to an allocated pointer so it can obey DMA coherency rules. However, the driver still passes &ir->request to usb_fill_control_urb(). That points the URB setup packet at the pointer field itself rather than at the allocated struct usb_ctrlrequest. USB core then interprets pointer bytes as the setup packet. This can produce an invalid bRequestType and trigger the control direction warning reported by syzbot: usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0 Pass ir->request itself as the setup packet.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-64240.html
  CVE-2026-64240
• https://bugzilla.suse.com/1273839
  SUSE Bug 1273839

Описание

In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference via get_pid() and stores it in timer.it.cpu.pid. If the subsequent posix_cpu_timer_set() call fails, the function returns immediately without calling posix_cpu_timer_del() to release the pid reference, causing a leak. Fix it by calling posix_cpu_timer_del() before the unlock-and-return on the error path, consistent with the other exit paths in the same function.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-64370.html
  CVE-2026-64370
• https://bugzilla.suse.com/1273805
  SUSE Bug 1273805

Описание

In the Linux kernel, the following vulnerability has been resolved: smb: client: harden POSIX SID length parsing posix_info_sid_size() reads sid[1] to obtain the subauthority count, but its existing boundary check still accepts buffers with only one remaining byte. Require two bytes before reading sid[1] so all client paths that reuse the helper reject truncated POSIX SIDs safely.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-64380.html
  CVE-2026-64380
• https://bugzilla.suse.com/1273557
  SUSE Bug 1273557

Описание

In the Linux kernel, the following vulnerability has been resolved: NTB: epf: Avoid calling pci_irq_vector() from hardirq context ntb_epf_vec_isr() calls pci_irq_vector() in hardirq context to derive the vector number. pci_irq_vector() calls msi_get_virq() that takes a mutex and can therefore trigger "scheduling while atomic" splats: BUG: scheduling while atomic: kworker/u33:0/55/0x00010001 ... Call trace: ... schedule+0x38/0x110 schedule_preempt_disabled+0x28/0x50 __mutex_lock.constprop.0+0x848/0x908 __mutex_lock_slowpath+0x18/0x30 mutex_lock+0x4c/0x60 msi_domain_get_virq+0xe8/0x138 pci_irq_vector+0x2c/0x60 ntb_epf_vec_isr+0x28/0x120 [ntb_hw_epf] __handle_irq_event_percpu+0x70/0x3a8 handle_irq_event+0x48/0x100 handle_edge_irq+0x100/0x1c8 ... Cache the Linux IRQ number for vector 0 when vectors are allocated and use it as a base in the ISR. Running the ISR in a threaded IRQ handler would also avoid the problem, but that would be unnecessary here.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-64430.html
  CVE-2026-64430
• https://bugzilla.suse.com/1274257
  SUSE Bug 1274257

Описание

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref l2cap_chan_timeout() runs asynchronously and accesses chan->conn. If the connection is torn down while the timer is running or pending, chan->conn can be freed, leading to a use-after-free when the timer worker attempts to lock conn->lock: | BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 [inline] | BUG: KASAN: slab-use-after-free in atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline] | BUG: KASAN: slab-use-after-free in __mutex_trylock_fast kernel/locking/mutex.c:161 [inline] | BUG: KASAN: slab-use-after-free in mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318 | Write of size 8 at addr ffff8881298d9550 by task kworker/2:1/83 | | CPU: 2 UID: 0 PID: 83 Comm: kworker/2:1 Not tainted 7.1.0-rc6-next-20260601-dirty #6 PREEMPT(full) | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 | Workqueue: events l2cap_chan_timeout | Call Trace: | <TASK> | instrument_atomic_read_write include/linux/instrumented.h:112 [inline] | atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline] | __mutex_trylock_fast kernel/locking/mutex.c:161 [inline] | mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318 | l2cap_chan_timeout+0x5d/0x1b0 net/bluetooth/l2cap_core.c:422 | process_one_work kernel/workqueue.c:3326 [inline] | process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409 | worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490 | kthread+0x346/0x430 kernel/kthread.c:436 | ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158 | ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 | </TASK> | | Allocated by task 320: | l2cap_conn_add+0xa7/0x820 net/bluetooth/l2cap_core.c:7075 | l2cap_connect_cfm+0xdb/0xd70 net/bluetooth/l2cap_core.c:7452 | hci_connect_cfm include/net/bluetooth/hci_core.h:2139 [inline] | hci_remote_features_evt+0x52f/0x9f0 net/bluetooth/hci_event.c:3760 | hci_event_func net/bluetooth/hci_event.c:7796 [inline] | hci_event_packet+0x561/0xa70 net/bluetooth/hci_event.c:7847 | hci_rx_work+0x370/0x890 net/bluetooth/hci_core.c:4040 | process_one_work kernel/workqueue.c:3326 [inline] | process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409 | worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490 | kthread+0x346/0x430 kernel/kthread.c:436 | ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158 | ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 | | Freed by task 322: | hci_disconn_cfm include/net/bluetooth/hci_core.h:2154 [inline] | hci_conn_hash_flush+0x101/0x1f0 net/bluetooth/hci_conn.c:2736 | hci_dev_close_sync+0x889/0xde0 net/bluetooth/hci_sync.c:5405 | hci_dev_do_close net/bluetooth/hci_core.c:502 [inline] | hci_unregister_dev+0x1f7/0x370 net/bluetooth/hci_core.c:2679 | vhci_release+0x12a/0x180 drivers/bluetooth/hci_vhci.c:690 | __fput+0x369/0x890 fs/file_table.c:510 | task_work_run+0x160/0x1d0 kernel/task_work.c:233 | get_signal+0xf5b/0x1120 kernel/signal.c:2810 | arch_do_signal_or_restart+0x4d/0x600 arch/x86/kernel/signal.c:337 | __exit_to_user_mode_loop kernel/entry/common.c:64 [inline] | exit_to_user_mode_loop+0x85/0x510 kernel/entry/common.c:98 | do_syscall_64+0x263/0x3d0 arch/x86/entry/syscall_64.c:100 | entry_SYSCALL_64_after_hwframe+0x77/0x7f | | The buggy address belongs to the object at ffff8881298d9400 | which belongs to the cache kmalloc-512 of size 512 | The buggy address is located 336 bytes inside of | freed 512-byte region [ffff8881298d9400, ffff8881298d9600) Fix it by having chan->conn hold a reference to l2cap_conn (via l2cap_conn_get) when the channel is added to the connection, and releasing it in the channel destructor. This ensures the l2cap_conn remains alive as long as the channel exists. A new FLAG_DEL channel flag is introduced to indicate that the ch ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-64434.html
  CVE-2026-64434
• https://bugzilla.suse.com/1273880
  SUSE Bug 1273880

Описание

In the Linux kernel, the following vulnerability has been resolved: audit: Fix data races of skb_queue_len() readers on audit_queue Multiple readers access audit_queue.qlen via skb_queue_len() without holding the queue lock or using READ_ONCE(), while kauditd writes to this field via the skb_dequeue() -> __skb_unlink() path with WRITE_ONCE() protected by a spinlock. This constitutes data races. All affected skb_queue_len(&audit_queue) call sites: - kauditd_thread() wait_event_freezable() condition - audit_receive_msg() AUDIT_GET handler (s.backlog assignment) - audit_receive() backlog check - audit_log_start() backlog check and pr_warn() KCSAN reports the following conflicting access pattern (one example): ================================================================== BUG: KCSAN: data-race in audit_log_start / skb_dequeue write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57: skb_dequeue+0x70/0xf0 kauditd_send_queue+0x71/0x220 kauditd_thread+0x1cb/0x430 kthread+0x1c2/0x210 ret_from_fork+0x162/0x1a0 ret_from_fork_asm+0x1a/0x30 read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1: audit_log_start+0x2a0/0x6b0 audit_core_dumps+0x64/0xa0 do_coredump+0x14b/0x1260 get_signal+0xeb2/0xf70 arch_do_signal_or_restart+0x41/0x170 exit_to_user_mode_loop+0xa2/0x1c0 do_syscall_64+0x1a3/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0xe0 value changed: 0x00000001 -> 0x00000000 ================================================================== Resolve the race by switching to lockless helper skb_queue_len_lockless(), which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE() write accesses already present on the writer side. [PM: line length tweak]

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-64435.html
  CVE-2026-64435
• https://bugzilla.suse.com/1274080
  SUSE Bug 1274080

Описание

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr() Three IE/attribute parsing functions have missing bounds checks. rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer without verifying that the header bytes (tag + length) are within the remaining buffer before reading them. Additionally, rtw_get_sec_ie() compares the 4-byte WPA OUI at cnt+2 without checking that at least 6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at cnt+6 without checking that at least 10 bytes remain. rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at entry, before verifying that wps_ielen is large enough to contain the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside the attribute loop, get_unaligned_be16() is called on attr_ptr and attr_ptr+2 without checking that 4 bytes remain in the buffer. Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie() and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum IE length requirement, add a wps_ielen < 6 early return in rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-64441.html
  CVE-2026-64441
• https://bugzilla.suse.com/1274261
  SUSE Bug 1274261

Описание

In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Enable IBPB flush on BPF JIT allocation Enable hardening against JIT spraying when Spectre-v2 mitigations are in use. Specifically, issue an IBPB flush on BPF JIT memory reuse. Skip enabling the IBPB flush if the BPF dispatcher is already using a retpoline sequence. This hardening applies only when BPF-JIT is in use. Guard the enabling under CONFIG_BPF_JIT so that bugs.c still builds with CONFIG_BPF_JIT=n.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-64507.html
  CVE-2026-64507
• https://bugzilla.suse.com/1273999
  SUSE Bug 1273999

Описание

In the Linux kernel, the following vulnerability has been resolved: bpf: Support for hardening against JIT spraying The BPF JIT allocator packs many small programs into larger executable allocations and reuses space within those allocations as programs are loaded and freed. When fresh code is written into space that a previous program occupied, an indirect jump into the new program can reuse a branch prediction left behind by the old one. Flush the indirect branch predictors before reusing JIT memory so that indirect jumps into a newly written program don't reuse predictions from an old program that occupied the same space. Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flush static call for flushing the branch predictors on JIT memory reuse. Architectures that need a flush, can update it to a predictor flush function. By default, its a NOP and does not emit any CALL. Allocations larger than a pack are not covered by this flush. That is safe because cBPF programs (the unprivileged attack surface) are bounded well below a pack size. Issue a warning if this assumption is ever violated while the flush is active.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-64508.html
  CVE-2026-64508
• https://bugzilla.suse.com/1273292
  SUSE Bug 1273292

Описание

In the Linux kernel, the following vulnerability has been resolved: xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit The struct pernet_operations docstring in include/net/net_namespace.h explicitly warns against blocking RCU primitives in .exit handlers: Exit methods using blocking RCU primitives, such as synchronize_rcu(), should be implemented via exit_batch. [...] Please, avoid synchronize_rcu() at all, where it's possible. Note that a combination of pre_exit() and exit() can be used, since a synchronize_rcu() is guaranteed between the calls. xfrm_policy_fini() violates this: it calls synchronize_rcu() before freeing the policy_bydst hash tables (so no RCU reader is mid- traversal at free time), but runs from xfrm_net_ops.exit -- once per namespace -- so a cleanup_net() of N namespaces pays N full RCU grace periods serially. Use the documented pre_exit/exit split. Move the policy flush (and the workqueue drains it depends on) into a new .pre_exit handler; xfrm_policy_fini() then runs in .exit and frees the hash tables after the synchronize_rcu_expedited() that cleanup_net() guarantees between the two phases. Providing O(1) RCU grace periods per batch instead of O(N). Observed on Linux 6.18 with a workload doing unshare(CLONE_NEWNET) at ~13/sec sustained: cleanup_net() and the netns_wq rescuer kthread both stuck in xfrm_policy_fini()'s synchronize_rcu(), >300k struct net accumulated in the cleanup queue, Percpu in /proc/meminfo climbed to 130+ GB on 256-CPU hosts, and memcg OOMs followed. setup_net and __put_net counts were balanced, ruling out a refcount leak.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-64525.html
  CVE-2026-64525
• https://bugzilla.suse.com/1274292
  SUSE Bug 1274292

Описание

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path In nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected, nvmet_req_uninit() is called unconditionally. However, if the command arrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init() had returned false and percpu_ref_tryget_live() was never executed. The unconditional percpu_ref_put() inside nvmet_req_uninit() then causes a refcount underflow, leading to a WARNING in percpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, and eventually a permanent workqueue deadlock. Check cmd->flags & NVMET_TCP_F_INIT_FAILED before calling nvmet_req_uninit(), matching the existing pattern in nvmet_tcp_execute_request().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-64534.html
  CVE-2026-64534
• https://bugzilla.suse.com/1273803
  SUSE Bug 1273803

Описание

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Fix potential UAF when ddgst mismatch Shivam Kumar found via vulnerability testing: When data digest is enabled on an NVMe/TCP connection and a digest mismatch occurs on a non-final H2C_DATA PDU during an R2T-based data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst() calls nvmet_req_uninit() - which performs percpu_ref_put() on the submission queue - but does NOT mark the command as completed. It does not set cqe->status, does not modify rbytes_done, and does not clear any flag. When the subsequent fatal error triggers queue teardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands, checks nvmet_tcp_need_data_in() for each one, and finds that the already-uninited command still appears to need data (because rbytes_done < transfer_len and cqe->status == 0). It therefore calls nvmet_req_uninit() a second time on the same command - a double percpu_ref_put against a single percpu_ref_get.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-64535.html
  CVE-2026-64535
• https://bugzilla.suse.com/1273809
  SUSE Bug 1273809

Описание

In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: set have_execfd only once the interpreter is opened load_misc_binary() raises bprm->have_execfd as soon as it sees the 'O' (or 'C') flag. This happens well before it opens the interpreter. If that open fails the flag stays set on the bprm. binfmt_misc is at the head of the format list so an interpreter open failure that returns -ENOEXEC lets the search fall through to a later format. This means it runs the matched binary directly having never staged an interpreter. So bprm->executable is NULL while have_execfd falsely claims a descriptor is present. Consequently, begin_new_exec() dereferences the missing executable: would_dump(bprm, bprm->executable); and NULL derefs. Had it not, the hand-off later in the same function would have failed anyway. FD_ADD(0, bprm->executable) rejects a NULL file with -ENOMEM. Both sites are past the point of no return so the exec cannot be unwound either way. This can be reached by unprivileged users as binfmt_misc can be mounted in user namespaces. So a user can register an 'O' entry whose interpreter lives on a FUSE mount, have the FUSE server fail the open with -ENOEXEC and execute a native ELF file that matches the entry. have_execfd only means anything alongside the executable it describes which is not set until the interpreter has been opened and staged. So lets raise it there, next to execfd_creds, which is already set at that point. An open failure now leaves it clear, so the fallback format derives credentials from the binary and emits no AT_EXECFD, as it would for any native exec. The argv rewrite load_misc_binary() performs before the open is still not undone. This means the binary sees the interpreter path in argv[0] and its own path in argv[1] but that predates this change and only became observable once the exec stopped faulting.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-68186.html
  CVE-2026-68186
• https://bugzilla.suse.com/1274949
  SUSE Bug 1274949

Описание

In the Linux kernel, the following vulnerability has been resolved: smb/client: handle overlapping allocated ranges in fallocate smb3_simple_fallocate_range() can skip holes when an allocated range returned by the server starts before the current fallocate offset. The skipped hole is not zero-filled, but fallocate still returns success. A later write to that hole may therefore fail with ENOSPC. The function queries allocated ranges so that it can preserve existing contents and write zeroes only into holes. However, the server may return a range that starts before the current fallocate offset. For example, assume the fallocate request is [100, 400) and the only allocated range returned by the server is [0, 200): Request: [100, 400) Server range: [ 0, 200) allocated Correct: [100, 200) allocated data, skip [200, 400) hole, zero-fill Current: [100, 300) skipped [300, 400) zero-filled afterwards The current code adds the full server range length, 200, to the current offset 100 and moves to 300. As a result, the hole in [200, 300) is skipped without being zero-filled. Fix this by advancing only over the part of the allocated range that overlaps the current fallocate offset. Ignore ranges that end before the current offset and reject ranges whose end offset overflows. This also prevents a malformed range length from causing an out-of-bounds zero-buffer read.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-68388.html
  CVE-2026-68388
• https://bugzilla.suse.com/1274902
  SUSE Bug 1274902

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: use kvzalloc to allocate struct dc struct dc has grown large over time (most of it the two inlined dc_scratch_space copies) and now sits close to the page allocator's 4 MiB contiguous allocation limit. Its actual size is not fixed by the source alone, it also depends on the compiler and the .config, so it can easily cross 4 MiB, e.g. with a newer GCC or a config change. dc_create() allocates it with kzalloc(). Once struct dc exceeds 4 MiB the request is rounded up to order 11 (8 MiB), which is above MAX_PAGE_ORDER, so the page allocator warns and returns NULL. dc_create() then fails, DM init fails and amdgpu probe aborts with -EINVAL: WARNING: mm/page_alloc.c:5197 at __alloc_frozen_pages_noprof+0x2f9/0x380 dc_create+0x38/0x660 [amdgpu] amdgpu_dm_init+0x2d9/0x510 [amdgpu] dm_hw_init+0x1b/0x90 [amdgpu] amdgpu_device_init.cold+0x150d/0x1e13 [amdgpu] amdgpu_driver_load_kms+0x19/0x80 [amdgpu] amdgpu_pci_probe+0x1e2/0x4c0 [amdgpu] dc_create() then returns NULL and DM init fails, which aborts the whole GPU init and makes amdgpu probe fail with -EINVAL ("hw_init of IP block <dm> failed -22"), leaving the display unusable. The subsequent amdgpu_irq_put() warnings during teardown are just fallout of unwinding a half-initialized device. struct dc is a software-only bookkeeping structure that is never handed to hardware DMA and is only ever kept as an opaque pointer, so it does not require physically contiguous memory. Allocate it with kvzalloc() (and free it with kvfree()) so that the allocator can fall back to vmalloc() when a contiguous allocation of that size is not available, which also avoids the MAX_PAGE_ORDER warning entirely. v2: - Rebase to amd-staging-drm-next. (cherry picked from commit 991e0516a8072f2292681c6ae98a924ab0e32575)

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-68436.html
  CVE-2026-68436
• https://bugzilla.suse.com/1276275
  SUSE Bug 1276275

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size from hardware without bounding it to the allocated BO region. If the HW field is larger than the queue's control stack allocation, memcpy reads past the BO into adjacent GTT memory and can leak kernel data to userspace. Store the page-aligned control stack BO size in mqd_manager and clamp checkpoint copies and reported checkpoint sizes to min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound for multi-XCC v9.4.3 checkpoint layout. (cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3)

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-68447.html
  CVE-2026-68447
• https://bugzilla.suse.com/1276280
  SUSE Bug 1276280

Описание

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in f2fs_balance_fs() When the f2fs filesystem space is nearly exhausted, we encounter deadlock issues as below: INFO: task A:1890 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:A state:D stack:0 pid:1890 tgid:1626 ppid:1153 flags:0x00000204 Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 folio_wait_bit+0x20/0x38 folio_wait_writeback+0x54/0xc8 truncate_inode_partial_folio+0x70/0x1e0 truncate_inode_pages_range+0x1b0/0x450 truncate_pagecache+0x54/0x88 f2fs_file_write_iter+0x3e8/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task kworker/u8:11:2680853 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:11 state:D stack:0 pid:2680853 tgid:2680853 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 __filemap_get_folio+0x214/0x348 pagecache_get_page+0x20/0x70 f2fs_get_read_data_page+0x150/0x3e8 f2fs_get_lock_data_page+0x2c/0x160 move_data_page+0x50/0x478 do_garbage_collect+0xd38/0x1528 f2fs_gc+0x240/0x7e0 f2fs_balance_fs+0x1a0/0x208 f2fs_write_single_data_page+0x6e4/0x730 f2fs_write_cache_pages+0x378/0x9b0 f2fs_write_data_pages+0x2e4/0x388 do_writepages+0x8c/0x2c8 __writeback_single_inode+0x4c/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x200 INFO: task kworker/u8:8:2641297 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:8 state:D stack:0 pid:2641297 tgid:2641297 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_write_inode+0xf4/0x328 __writeback_single_inode+0x370/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x20 INFO: task B:1902 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:B state:D stack:0 pid:1902 tgid:1626 ppid:1153 flags:0x0000020c Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_map_blocks+0x94c/0x1110 f2fs_file_write_iter+0x228/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task sync:2769849 blocked for more than 120 seconds. Tainted: G ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-68460.html
  CVE-2026-68460
• https://bugzilla.suse.com/1276774
  SUSE Bug 1276774

Описание

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: lpc32xx_slc: fail DMA transfer on completion timeout lpc32xx_xmit_dma() waits for the DMA completion callback but ignores wait_for_completion_timeout(). A timed out DMA transfer is therefore unmapped and reported as successful to the NAND read/write path. Return -ETIMEDOUT when the completion wait expires. Terminate the DMA channel before unmapping the scatterlist so the timed out transfer cannot continue to access the buffer after the error is returned.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-68466.html
  CVE-2026-68466
• https://bugzilla.suse.com/1276476
  SUSE Bug 1276476

Описание

In the Linux kernel, the following vulnerability has been resolved: mtd: mchp23k256: use SPI match data for chip caps The driver stores chip capacity information in both the OF match table and the SPI id table. Probe currently uses of_device_get_match_data(), so a non-OF SPI modalias match falls back to mchp23k256_caps even when the SPI id table selected a different part. Use spi_get_device_match_data() so SPI id-table driver_data is consumed when OF match data is absent. This keeps the existing default fallback while avoiding the wrong MTD geometry for id-table-only matches.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-68467.html
  CVE-2026-68467
• https://bugzilla.suse.com/1276482
  SUSE Bug 1276482

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix permanently busy scans after multiple roam iterations In order for the firmware to sleep, the driver has to confirm a previously received sleep request. The normal sequence of evets goes like this: EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm -> SLEEP -> EVENT_AWAKE -> AWAKE. Before sending the sleep-confirm command, the driver must make sure there are no commands either running or waiting to be completed. mwifiex_ret_802_11_associate() unconditionally sets ps_state = PS_STATE_AWAKE when it processes the association command response, outside of the normal powersave management flow. If EVENT_SLEEP arrives while the association command is in flight, ps_state is PRE_SLEEP when the association command response is parsed, and the forced AWAKE overwrites it. The deferred sleep-confirm is never sent. A subsequent scan_start command is correctly acknowledged, but the firmware doesn't generate scan_result events. The scan request never finishes, and additional requests from userspace fail with -EBUSY. After testing on both IW412 and W8997, I could only trigger the bug on the IW412 and observed the firmwares behave differently. On the IW412 the firmware still sends EVENT_SLEEP while the authentication / association process is ongoing. A W8997 under the same conditions seems to suppress power-save for the duration of the association, so PRE_SLEEP never coincided with the association response even after extended periods of testing using the loops described below (>12hours). On the IW412, the delay between commands that triggers an EVENT_SLEEP was empirically determined to be ~20ms. This delay can naturally occur when the driver is outputting debugging information (debug_mask = 0x00000037), in which situation the busy scans issue is repeatable while running "test 1)" as described below. If the delay between commands is less than ~20ms, the firmware stays awake and the issue was not reproducible running the same test. The host_mlme=false path also behaves differently. In this case, the entire authentication / association transaction is executed by one command (HostCmd_CMD_802_11_ASSOCIATE), and the firmware doesn't emit EVENT_SLEEP while the command is running. Remove the assignment so the ps_state is only manipulated in the paths that are related to powersave event handling and on the main workqueue for correct sleep confirmation. The following loop tests were performed (with debugging output enabled): 1) force roaming between two AP's, one 5GHz and one 2.4GHz, same SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s between iterations. 2) force a disconnection to AP 1 and a connection to AP 2, test scan. Use wpa_cli to trigger the connection changes, sleep 2s between iterations. Each test ran in each device for at least 3 hours.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-68469.html
  CVE-2026-68469
• https://bugzilla.suse.com/1276499
  SUSE Bug 1276499

Описание

In the Linux kernel, the following vulnerability has been resolved: reset: sunxi: fix memory region leak on ioremap failure In sunxi_reset_init(), when ioremap() fails, the memory region obtained via request_mem_region() is not released, leading to a resource leak. Add an err_mem_region label to properly release the memory region before freeing the data structure.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-68475.html
  CVE-2026-68475
• https://bugzilla.suse.com/1276773
  SUSE Bug 1276773

Описание

In the Linux kernel, the following vulnerability has been resolved: memstick: ms_block: reject a card that reports too many blocks msb_ftl_initialize() computes the zone count from the card block count with no bound: msb->zone_count = msb->block_count / MS_BLOCKS_IN_ZONE; ... for (i = 0; i < msb->zone_count; i++) msb->free_block_count[i] = MS_BLOCKS_IN_ZONE; msb->block_count is a card value. msb_read_boot_blocks() reads number_of_blocks from the card boot page and byte swaps it. free_block_count is a fixed int[MS_MAX_ZONES]. MS_MAX_ZONES is 16, so the valid indices are 0 to 15. The init loop above indexes it by zone_count. msb_mark_block_used() and msb_mark_block_unused() index it by pba / MS_BLOCKS_IN_ZONE, for pba up to block_count - 1. A card may report up to 65535 blocks. A block_count above 8192 (MS_MAX_ZONES * MS_BLOCKS_IN_ZONE) lets the pba index reach 16. That writes past free_block_count[] and corrupts struct msb_data. A larger count runs the init loop past the end too. A real Memory Stick has at most 16 zones. So it has at most 8192 blocks. msb_ftl_initialize() now rejects a card that reports more than MS_MAX_ZONES * MS_BLOCKS_IN_ZONE blocks.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-68478.html
  CVE-2026-68478
• https://bugzilla.suse.com/1276576
  SUSE Bug 1276576

Описание

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: validate firmware patch bounds rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the firmware version. A malformed firmware patch shorter than the version field can make this subtraction underflow and turn the copy into an oversized read and write during Bluetooth setup. The existing patch_offset + patch_length check can also wrap on 32-bit architectures. Validate the patch length and range without arithmetic overflow before allocating or copying the patch.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-68479.html
  CVE-2026-68479
• https://bugzilla.suse.com/1276585
  SUSE Bug 1276585

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix memory leak in ieee80211_register_hw() If kmemdup() fails while copying supported band structures, the error path jumps to fail_rate. This skips rate_control_deinitialize() and leaks the initialized local->rate_ctrl. Fix this by adding a fail_band label that shares the rate-control cleanup path before falling through to the remaining teardown. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have a suitable mac80211 device/driver combination to test with, no runtime testing was able to be performed.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72004.html
  CVE-2026-72004
• https://bugzilla.suse.com/1276772
  SUSE Bug 1276772

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: avoid full teardown before work setup in probe rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for all probe failures. However, drv_data allocation and workqueue allocation can fail before intf_work, autowakeup_work and sleep_work have been initialized. Do not enter the full remove path until the probe has reached the point where those work items are set up. Return directly for drv_data allocation failure, and use a small early cleanup path for workqueue allocation failure. This issue was found by our static analysis tool and then confirmed by manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The early probe exits should not call a common teardown path that assumes the later work setup has already completed. A QEMU PoC forced alloc_ordered_workqueue() to fail before the work initializers are reached. The resulting fail path entered rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72005.html
  CVE-2026-72005
• https://bugzilla.suse.com/1276592
  SUSE Bug 1276592

Описание

In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: rebind mm mempolicy to effective_mems, not mems_allowed Creating a child cpuset where cpuset.mems is never set leads to a div/0 when a VMA mempolicy with MPOL_F_RELATIVE_NODES rebinds in response to a CPU hotplug event. Reproduction steps: 1) Create a cgroup w/ cpuset controls (do not set cpuset.mems) 2) Move the task into the child cpuset 3) Create a VMA mempolicy for that task with MPOL_F_RELATIVE_NODES 4) unplug and hotplug a cpu echo 0 > /sys/devices/system/cpu/cpu1/online echo 1 > /sys/devices/system/cpu/cpu1/online 5) mempolicy rebind does a div/0 in mpol_relative_nodemask on the call to __nodes_fold() The cpuset code passes (cs->mems_allowed) which is not guaranteed to have nodes to the rebind routine. Use cs->effective_mems instead, which is guaranteed to have a non-empty nodemask once we reach that code path. [ david: add a comment, slightly rephrase description ]

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72010.html
  CVE-2026-72010
• https://bugzilla.suse.com/1276776
  SUSE Bug 1276776

Описание

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: bound device offsets in the MUX downlink decoder mux_dl_adb_decode() walks a chain of aggregated datagram tables using offsets and lengths taken from the modem. first_table_index, next_table_index, table_length, datagram_index and datagram_length are all device supplied le values. Only first_table_index was checked, and only for being non zero. The decoder then formed adth = block + adth_index and read the table header and the datagram entries with no bound against the received skb. A modem that reports an index or a length past the downlink buffer makes the decoder read out of bounds. The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most that, so skb->len is the real limit, but none of these in band offsets were checked against it. The table chain is also followed with no forward progress check. The loop takes the next table from adth->next_table_index and stops only when that reaches zero. A modem can stage two tables that point at each other, so the loop never ends. It runs in softirq and clones the skb on every pass. Validate every device offset and length against skb->len before use. The block header must fit. Each table header, on entry and after every next_table_index, must lie inside the skb. The datagram table must fit. Each datagram index and length must stay inside the skb. The header padding must not exceed the datagram length so the receive length does not wrap. Require each next_table_index to move forward so the chain cannot cycle. This was reproduced under KASAN as a slab out of bounds read on a normal downlink receive once the iosm net device is up.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72029.html
  CVE-2026-72029
• https://bugzilla.suse.com/1276940
  SUSE Bug 1276940
• https://bugzilla.suse.com/1277252
  SUSE Bug 1277252

Описание

In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange a kmalloc'd buffer pointer through a struct kfifo, but pass a literal '4' as the byte count to kfifo_in()/kfifo_out(). This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the low 4 bytes of the 8-byte pointer are written into the FIFO. The reader then reads back 4 bytes into an 8-byte local pointer variable, leaving the upper 4 bytes uninitialized stack data. The first dereference of the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel address and generally results in an oops. Use sizeof(fifo_buffer) so the byte count matches pointer width on every architecture. The driver has no architecture restriction in Kconfig, so any 64-bit build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has been latent since the driver was added in 2017 because it is most commonly deployed on 32-bit MCUs. Found via a custom Coccinelle semantic patch hunting for short-byte kfifo I/O on byte-mode kfifos used to shuttle pointers.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72047.html
  CVE-2026-72047
• https://bugzilla.suse.com/1277091
  SUSE Bug 1277091

Описание

In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: fix cas_ctl leak on spi_async failure ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC) and relies entirely on the SPI completion callback ca8210_spi_transfer_complete() to free it. The spi_async() API only invokes the completion callback on successful submission. On failure it returns a negative error code without ever queuing the callback, which leaves cas_ctl and its embedded spi_message and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is inside the completion callback, so there is no other reclamation path. ca8210_spi_transfer() is called from ca8210_spi_exchange(), the interrupt handler ca8210_interrupt_handler(), and from the retry path inside the completion callback itself. The exchange and interrupt handler paths loop on -EBUSY, so under sustained SPI bus contention every retry iteration leaks a fresh cas_ctl (~600 bytes per occurrence). Fix it by freeing cas_ctl on the spi_async() error path. While here, correct the misleading error string: the function calls spi_async(), not spi_sync().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72048.html
  CVE-2026-72048
• https://bugzilla.suse.com/1276949
  SUSE Bug 1276949

Описание

In the Linux kernel, the following vulnerability has been resolved: ieee802154: admin-gate legacy LLSEC dump operations In net/ieee802154/netlink.c, the legacy IEEE802154_NL family ops table builds the LLSEC dump entries (LLSEC_LIST_KEY, LLSEC_LIST_DEV, LLSEC_LIST_DEVKEY, LLSEC_LIST_SECLEVEL) with IEEE802154_DUMP() which sets no .flags, so generic netlink runs them ungated. The modern nl802154 family admin-gates the equivalent reads via NL802154_CMD_GET_SEC_KEY and friends with .flags = GENL_ADMIN_PERM. Any local uid that can open AF_NETLINK / NETLINK_GENERIC can resolve the "802.15.4 MAC" family and dump LLSEC_LIST_KEY on any wpan netdev that has an LLSEC key installed; the dump handler writes the raw 16-byte AES-128 key bytes (IEEE802154_ATTR_LLSEC_KEY_BYTES, copied verbatim from struct ieee802154_llsec_key.key) into the reply. Recovering the AES key compromises 802.15.4 LLSEC link confidentiality and authenticity, since LLSEC uses CCM* and the same key authenticates and encrypts frames. Impact: any local uid with no capabilities can read the raw 16-byte AES-128 LLSEC key from the kernel keytable on any wpan netdev that has an administrator-installed LLSEC key, by issuing an LLSEC_LIST_KEY dump on the legacy IEEE802154_NL generic-netlink family. Introduce IEEE802154_DUMP_PRIV() mirroring IEEE802154_DUMP() but setting .flags = GENL_ADMIN_PERM, and use it for the four LLSEC dump entries. LIST_PHY and LIST_IFACE retain IEEE802154_DUMP() because the modern nl802154 family exposes their equivalents to unprivileged readers by design (NL802154_CMD_GET_WPAN_PHY and NL802154_CMD_GET_INTERFACE carry "can be retrieved by unprivileged users" annotations).

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72049.html
  CVE-2026-72049
• https://bugzilla.suse.com/1277094
  SUSE Bug 1277094

Описание

In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: destroy DMA pool on CLDMA late init failure t7xx_cldma_late_init() creates md_ctrl->gpd_dmapool before initializing the TX and RX rings. If any ring initialization fails, the error path frees the already initialized rings but leaves the DMA pool allocated. Destroy md_ctrl->gpd_dmapool on the late-init failure path to avoid leaking the DMA pool.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72059.html
  CVE-2026-72059
• https://bugzilla.suse.com/1277240
  SUSE Bug 1277240

Описание

In the Linux kernel, the following vulnerability has been resolved: net: mana: Sync page pool RX frags for CPU MANA allocates RX buffers from page pool fragments when frag_count is greater than 1. In that case the buffers remain DMA mapped by page pool and the RX completion path does not call dma_unmap_single(). As a result, the implicit sync-for-CPU normally performed by dma_unmap_single() is missing before the packet data is passed to the networking stack. This breaks RX on configurations which require explicit DMA syncing, for example when booted with swiotlb=force. Fix this by recording the page pool page and DMA sync offset when the RX buffer is allocated, and syncing the received packet range for CPU access before handing the RX buffer to the stack.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72064.html
  CVE-2026-72064
• https://bugzilla.suse.com/1275521
  SUSE Bug 1275521

Описание

In the Linux kernel, the following vulnerability has been resolved: net: mana: Validate the packet length reported by the NIC Validate the packet length reported in the RX CQE before passing it to skb processing. The CQE is supplied by the NIC device and should not be blindly trusted.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72065.html
  CVE-2026-72065
• https://bugzilla.suse.com/1275524
  SUSE Bug 1275524
• https://bugzilla.suse.com/1275525
  SUSE Bug 1275525

Описание

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix use-after-free on probe failure The vub300 driver lifetime-manages its controller state using vub300->kref, with vub300_delete() freeing the mmc host when the last reference is dropped. The probe error path after the inactivity timer has been armed still bypasses that lifetime rule, however, and falls through to mmc_free_host() directly if mmc_add_host() fails. The race window is between arming the inactivity timer and reaching the probe error unwind after mmc_add_host() fails: probe thread timer/workqueue ------------ --------------- kref_init(&vub300->kref) ref = 1 kref_get(&vub300->kref) ref = 2, timer ref add_timer(inactivity_timer) fires after one second | | race window |<----------------------------------------------------> | mmc_add_host(mmc) inactivity timer fires vub300_queue_dead_work() kref_get() ref = 3 queue_work(deadwork) mmc_add_host() fails timer_delete_sync() mmc_free_host(mmc) frees vub300 deadwork runs use-after-free The inactivity timeout is one second, so this would require mmc_add_host() to both fail and take more than one second to do so. This is unlikely to happen in practice, but the error path is still wrong. timer_delete_sync() only waits for the timer callback itself. It does not flush deadwork that the callback may already have queued. As a result, queued deadwork can still hold a kref while the probe error path directly frees the backing mmc host, including the vub300 storage. Fix this by using the same lifetime mechanism as disconnect. Clear vub300->interface so that the timer callback and any queued deadwork return early and drop their references, then drop the initial probe reference and return without falling through to err_free_host.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72073.html
  CVE-2026-72073
• https://bugzilla.suse.com/1277157
  SUSE Bug 1277157

Описание

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix type confusion in CDC union descriptor parsing The driver currently trusts the bMasterInterface0 from the CDC union descriptor without verifying that it matches the interface being probed. This could lead to the driver overwriting the private data of another interface. Validate that the control interface found in the descriptor is indeed the one we are probing.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72074.html
  CVE-2026-72074
• https://bugzilla.suse.com/1277158
  SUSE Bug 1277158

Описание

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix race condition in reset_device sysfs callback The ims_pcu_reset_device() sysfs callback calls ims_pcu_execute_command() without acquiring pcu->cmd_mutex. This can lead to data races and corruption of the shared command buffer if triggered concurrently with other commands. Acquire pcu->cmd_mutex before calling ims_pcu_execute_command().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72075.html
  CVE-2026-72075
• https://bugzilla.suse.com/1277161
  SUSE Bug 1277161

Описание

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix out-of-bounds read in ims_pcu_irq() debug logging The debug logging in ims_pcu_irq() unconditionally prints data from pcu->urb_in_buf. However, if the interrupt fired for pcu->urb_ctrl, the actual data resides in pcu->urb_ctrl_buf. If urb->actual_length for the control URB exceeds pcu->max_in_size, this leads to an out-of-bounds read. Fix this by printing from the correct buffer associated with the URB.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72076.html
  CVE-2026-72076
• https://bugzilla.suse.com/1277163
  SUSE Bug 1277163

Описание

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix firmware leak in async update The firmware object was not being released if validation failed. Use __free(firmware) to ensure the firmware is always released.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72077.html
  CVE-2026-72077
• https://bugzilla.suse.com/1277166
  SUSE Bug 1277166

Описание

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - validate control endpoint type The driver currently assumes that the first endpoint of the control interface is an interrupt IN endpoint without verifying it. A malicious device could provide a different endpoint type, which would then be passed to usb_fill_int_urb(), potentially leading to kernel warnings or undefined behavior. Verify that the control endpoint is an interrupt IN endpoint.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72078.html
  CVE-2026-72078
• https://bugzilla.suse.com/1277167
  SUSE Bug 1277167

Описание

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix use-after-free and double-free in disconnect ims_pcu_disconnect() only intended to perform cleanup when the primary (control) interface is unbound. However, it currently relies on the interface class to distinguish between control and data interfaces. A malicious device could present a data interface with the same class as the control interface, leading to premature cleanup and potential use-after-free or double-free. Switch to verifying that the interface being disconnected is indeed the control interface.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72079.html
  CVE-2026-72079
• https://bugzilla.suse.com/1277169
  SUSE Bug 1277169

Описание

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Reject firmware log with size smaller than header fw_log_from_bo() validates the tracing buffer header_size and that the log fits within the BO, but never checks that log->size is at least log->header_size. fw_log_print_buffer() then computes: u32 data_size = log->size - log->header_size; which underflows to a near-U32_MAX value when firmware reports a log whose size is smaller than its header. That huge data_size defeats the log_start/log_end bounds clamps added by commit dd1311bcf0e6 ("accel/ivpu: Add bounds checks for firmware log indices"), so fw_log_print_lines() reads far past the small real data region of the BO. A size of 0 also makes fw_log_from_bo() advance the offset by 0, causing the callers to loop forever on the same header. Reject logs whose size is smaller than the header (which also rejects size == 0).

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72089.html
  CVE-2026-72089
• https://bugzilla.suse.com/1277182
  SUSE Bug 1277182

Описание

In the Linux kernel, the following vulnerability has been resolved: dm-log: fix a bitset_size overflow on 32bit machines Commit c20e36b7631d ("dm log: fix out-of-bounds write due to region_count overflow") made sure that region_count could fit in an unsigned int. But the bitmap memory isn't allocated based on region_count. It uses bitset_size (a size_t variable). The first step of calculating bitset_size is to set it to region_count, rounded up to a multiple of BITS_PER_LONG. If region_size is less than BITS_PER_LONG smaller than UINT_MAX, it will get rounded up to 2^32. On a 32bit architecture, this will make bitset_size wrap around to 0 and fail, despite region_count being valid. Since bitset_size gets divided by 8, it can hold any valid region_count. It just needs a special case to handle the rollover. If it is 0, the value rolled over, and bitset size should be set to the number of bytes needed to hold 2^32 bits.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72105.html
  CVE-2026-72105
• https://bugzilla.suse.com/1277317
  SUSE Bug 1277317

Описание

In the Linux kernel, the following vulnerability has been resolved: bpf,fork: wipe ->bpf_storage before bailouts that access it Currently, copy_process() can bail out to free_task() before p->bpf_storage has been initialized, with this call graph (shown here for the !CONFIG_MEMCG case): copy_process dup_task_struct arch_dup_task_struct [copies the entire task_struct, including ->bpf_storage member] [RLIMIT_NPROC check fails] delayed_free_task free_task bpf_task_storage_free rcu_dereference(task->bpf_storage) bpf_local_storage_destroy In this case, the nascent task's ->bpf_storage member that bpf_local_storage_destroy() operates on is a plain copy of the parent's ->bpf_storage pointer, not a real initialized pointer. This leads to badness (kernel hangs, UAF). This is reachable as long as the process calling fork() has been inserted into a task storage map.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72110.html
  CVE-2026-72110
• https://bugzilla.suse.com/1277357
  SUSE Bug 1277357
• https://bugzilla.suse.com/1277363
  SUSE Bug 1277363

Описание

In the Linux kernel, the following vulnerability has been resolved: bpf: Reset register bounds before narrowing retval range in check_mem_access() When the BPF verifier processes a context load of an LSM hook return value, it calls __mark_reg_s32_range() to narrow the register to the hook's valid range. However, __mark_reg_s32_range() intersects the new range with the register's existing bounds using max_t()/min_t() rather than replacing them. If the destination register carries stale bounds from a prior instruction (e.g. BPF_MOV64_IMM), the intersection can produce a range narrower than reality. The verifier then believes it knows the register's exact value, while at runtime the actual hook return value is loaded, creating a verifier/runtime mismatch that can be used to bypass BPF memory safety checks. The else branch already calls mark_reg_unknown() to reset register state before any narrowing. Apply the same reset in the is_retval path so stale bounds are cleared before __mark_reg_s32_range() intersects.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72111.html
  CVE-2026-72111
• https://bugzilla.suse.com/1277389
  SUSE Bug 1277389

Описание

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing rcu list annotations and operations sashiko-bot remarked the missing use of list_add_rcu() in bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure when bcm_proc_show() traverses the bcm_op's under rcu_read_lock(). To cover all initial settings of the bcm_op's the list_add_rcu() calls are moved to the end of the setup code. While at it, also fix the mirroring removal side: bcm_release() called bcm_remove_op() - which frees the op via call_rcu() - on ops that were still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first. Unlink each op with list_del_rcu() before handing it to bcm_remove_op(), matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72120.html
  CVE-2026-72120
• https://bugzilla.suse.com/1277497
  SUSE Bug 1277497

Описание

In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silently turning a socket bound to a specific CAN interface into one that also matches "any" interface. Keep the lockless bo->bound check purely as a fast-path reject, and move the ifindex read (and a bo->bound re-check) into the locked section, where every writer already serializes. This removes the possibility of observing the two fields torn against each other, rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs on two independently updated fields. Annotate the now-purely-lockless bo->bound accesses consistently across all its write sites. Also fix bcm_rx_setup() silently returning success when the target device disappears concurrently instead of reporting -ENODEV, so a broken RX op is no longer left registered as if it had succeeded.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72122.html
  CVE-2026-72122
• https://bugzilla.suse.com/1277520
  SUSE Bug 1277520

Описание

In the Linux kernel, the following vulnerability has been resolved: can: isotp: use unconditional synchronize_rcu() in isotp_release() isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister() and clears so->bound without waiting for a grace period. isotp_release() uses so->bound to decide whether it needs to call synchronize_rcu() before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it skips that synchronize_rcu() and can cancel the timer while an in-flight isotp_rcv() is still executing and about to re-arm it via isotp_send_fc(), leading to a use-after-free timer callback on the freed socket. sakisho-bot remarked a problem with rtnl_lock held in isotp_notify(), therefore make isotp_release() always call synchronize_rcu() before cancelling the timers, regardless of so->bound. This still closes the original race (isotp_notify() clearing so->bound without waiting for in-flight isotp_rcv() callers before isotp_release() cancels the RX timer) without adding any RCU wait to the netdevice notifier path.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72126.html
  CVE-2026-72126
• https://bugzilla.suse.com/1277538
  SUSE Bug 1277538
• https://bugzilla.suse.com/1277867
  SUSE Bug 1277867

Описание

In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: Fix completion initialization order before devm_request_irq() The driver calls devm_request_irq() before initializing the completion used by the interrupt handler. Because the interrupt may occur immediately after devm_request_irq(), the handler may execute before init_completion(). This may result in calling complete() on an uninitialized completion, causing undefined behavior. This has been observed with KASAN. Fix this by initializing the completion before registering the IRQ.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72133.html
  CVE-2026-72133
• https://bugzilla.suse.com/1277566
  SUSE Bug 1277566

Описание

In the Linux kernel, the following vulnerability has been resolved: i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource() If devm_platform_get_and_ioremap_resource() returns an error, mlxbf_i2c_init_resource() frees tmp_res before reading tmp_res->io to get the error code. This results in a use-after-free. Save the error code before freeing tmp_res.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72140.html
  CVE-2026-72140
• https://bugzilla.suse.com/1277576
  SUSE Bug 1277576

Описание

In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (atomic) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic (polling) path rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle for this i2c controller. Reading I2DR to obtain the count likewise arms the next byte on the count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly and left the bus held. Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so the existing last-byte handling emits STOP; the dummy byte is discarded. A count of 0 is a valid empty block read; a count above I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus has been released. The interrupt-driven path has the same flaw from a later commit and is fixed separately, as it carries a different Fixes: tag and stable range.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72142.html
  CVE-2026-72142
• https://bugzilla.suse.com/1277522
  SUSE Bug 1277522

Описание

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Add spinlock to protect DONE_INT_MASK and ABORT_INT_MASK The DONE_INT_MASK and ABORT_INT_MASK registers are shared by all DMA channels, and modifying them requires a read-modify-write sequence. Because this operation is not atomic, concurrent calls to dw_edma_v0_core_start() can introduce race conditions if two channels update these registers simultaneously. Add a spinlock to serialize access to these registers and prevent race conditions. [den: update dw_edma.lock comment]

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72148.html
  CVE-2026-72148
• https://bugzilla.suse.com/1277529
  SUSE Bug 1277529

Описание

In the Linux kernel, the following vulnerability has been resolved: dmaengine: tegra: Fix burst size calculation Currently, the Tegra GPC DMA hardware requires the transfer length to be a multiple of the max burst size configured for the channel. When a client requests a transfer where the length is not evenly divisible by the configured max burst size, the DMA hangs with partial burst at the end. Fix this by reducing the burst size to the largest power-of-2 value that evenly divides the transfer length. For example, a 40-byte transfer with a 16-byte max burst will now use an 8-byte burst (40 / 8 = 5 complete bursts) instead of causing a hang. This issue was observed with the PL011 UART driver where TX DMA transfers of arbitrary lengths were stuck.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72149.html
  CVE-2026-72149
• https://bugzilla.suse.com/1277530
  SUSE Bug 1277530

Описание

In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_tis_spi: Use wait_woken() in wait_for_tmp_stat() wait_event_interruptible_timeout() evaluates its condition after setting the current task state to TASK_INTERRUPTIBLE. With CONFIG_DEBUG_ATOMIC_SLEEP this triggers a warning when the IRQ wait path is used: tpm_tis_status() tpm_tis_spi_read_bytes() tpm_tis_spi_transfer_full() spi_bus_lock() mutex_lock() Address this with the following measures: 1. Call wait_tpm_stat_cond() only while tasking is running. 2. Use wait_woken() to wait for changes.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72152.html
  CVE-2026-72152
• https://bugzilla.suse.com/1277533
  SUSE Bug 1277533

Описание

In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: swp: Improve locking user experience In the case of the first block being locked (or the few first blocks), if the user want to fully unlock the device it has two possibilities: - either it asks to unlock the entire device, and this works; - or it asks to unlock just the block(s) that are currently locked, which fails. It fails because the conditions "can_be_top" and "can_be_bottom" are true. Indeed, in this case, we unlock everything, so the TB bit does not matter. However in the current implementation, use_top would be true (as this is the favourite option) and lock_len, which in practice should be reduced down to 0, is set to "nor->params->size - (ofs + len)" which is a positive number. This is wrong. An easy way is to simply add an extra condition. In the unlock() path, if we can achieve the same result from both sides, it means we unlock everything and lock_len must simply be 0. A comment is added to clarify that logic.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72155.html
  CVE-2026-72155
• https://bugzilla.suse.com/1277540
  SUSE Bug 1277540

Описание

In the Linux kernel, the following vulnerability has been resolved: fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() mpf_ops_parse_header() reads header_size from the bitstream at MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression *(buf + header_size - 1) reads one byte before the buffer start. Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET. The only real gap is the zero header_size case, which cannot be resolved by providing a larger buffer, so return -EINVAL.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72156.html
  CVE-2026-72156
• https://bugzilla.suse.com/1277541
  SUSE Bug 1277541

Описание

In the Linux kernel, the following vulnerability has been resolved: fpga: dfl: add bounds check in dfh_get_param_size() dfh_get_param_size() can return a parameter size larger than the feature region because the loop bounds check is evaluated before incrementing size. If the EOP (End of Parameters) bit is set in the same iteration, the inflated size is returned without re-validation against max. This can cause create_feature_instance() to call memcpy_fromio() with a size exceeding the ioremap'd region when a malicious FPGA device provides crafted DFHv1 parameter headers. Add a bounds check after the size increment to ensure the accumulated size never exceeds the feature boundary.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72158.html
  CVE-2026-72158
• https://bugzilla.suse.com/1277546
  SUSE Bug 1277546

Описание

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: fix condition in 'nand_select_target()' 'cs' here must be in range [0:nanddev_ntargets[.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72165.html
  CVE-2026-72165
• https://bugzilla.suse.com/1277554
  SUSE Bug 1277554

Описание

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: pl353: fix probe resource allocation During probe(), the devm_ioremap() is called with the parent device instead of the current one. So when the module is unloaded, the register area isn't released. Target the pl35x device in the devm_ioremap() instead of its parent.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72167.html
  CVE-2026-72167
• https://bugzilla.suse.com/1277682
  SUSE Bug 1277682

Описание

In the Linux kernel, the following vulnerability has been resolved: mtd: slram: remove failed entries from the device list register_device() links a new slram_mtdlist entry before allocating all of the state needed by the entry. If a later allocation, memremap(), or mtd_device_register() fails, the partially initialized entry remains on the global list. A later cleanup can then dereference or free invalid state from that failed entry. Unwind the partially initialized entry and clear the list tail on each failure path after the entry has been linked.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72171.html
  CVE-2026-72171
• https://bugzilla.suse.com/1277690
  SUSE Bug 1277690

Описание

In the Linux kernel, the following vulnerability has been resolved: power: supply: charger-manager: fix refcount leak in is_full_charged() In is_full_charged(), power_supply_get_by_name() is called to obtain a reference to the fuel_gauge power supply. If the voltage check (uV >= desc->fullbatt_uV) succeeds, the function returns true directly without releasing the reference, leaking the refcount. Fix this by setting a flag and jumping to the out label where power_supply_put() properly drops the reference.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72182.html
  CVE-2026-72182
• https://bugzilla.suse.com/1277225
  SUSE Bug 1277225

Описание

In the Linux kernel, the following vulnerability has been resolved: power: supply: cpcap-battery: Fix missing nvmem_device_put() causing reference leak In cpcap_battery_detect_battery_type(), the reference to an nvmem device obtained via nvmem_device_find() is not released with nvmem_device_put() on the success or read-failure paths, causing a permanent reference leak. The driver's retry logic on subsequent battery property reads can compound this leak, preventing the nvmem device from ever being freed. Found by code review.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72214.html
  CVE-2026-72214
• https://bugzilla.suse.com/1277222
  SUSE Bug 1277222

Описание

In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: Fix leak when custom dump_segments addition fails Free allocated minidump_region 'name' in qcom_add_minidump_segments() when failing before adding the region to 'dump_segments'. Otherwise, the 'name' is not tracked and is never freed by qcom_minidump_cleanup(). Return error when adding to 'dump_segments' fails.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72216.html
  CVE-2026-72216
• https://bugzilla.suse.com/1277221
  SUSE Bug 1277221

Описание

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: prevent TVLV OOB check overflow A TT unicast TVLV contains the number of VLANs stored in it. This number is an u16 and gets multiplied by the size of the struct batadv_tvlv_tt_vlan_data (8 bytes). The size can therefore overflow the u16 used to store the tt_vlan_len. All additional safety checks to prevent out-of-bounds access of the TVLV buffer are invalid due to this overflow. Using size_t prevents this overflow and ensures that the safety checks compare against the actual buffer requirements.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72226.html
  CVE-2026-72226
• https://bugzilla.suse.com/1275671
  SUSE Bug 1275671

Описание

In the Linux kernel, the following vulnerability has been resolved: batman-adv: frag: fix primary_if leak on failed linearization If the skb has a frag_list, it must be linearized before it can be split using skb_split(). But when this step failed, it must not only free the skb but also take care of the reference to the already found primary_if.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72228.html
  CVE-2026-72228
• https://bugzilla.suse.com/1277607
  SUSE Bug 1277607

Описание

In the Linux kernel, the following vulnerability has been resolved: batman-adv: frag: free unfragmentable packet The caller of batadv_frag_send_packet() assume that the skb provided to the function are always consumed. But the pre-check for an empty payload or the zero fragment size returned an error without any further actions. A failed pre-check must use the same error handling code as the rest of the function.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72230.html
  CVE-2026-72230
• https://bugzilla.suse.com/1277609
  SUSE Bug 1277609

Описание

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: avoid request storms during pending request batadv_send_tt_request() allocates a tt_req_node when none exists for the destination originator node. This should prevent that a multiple TT requests are send at the same time to an originator. But if allocation of the send buffer failed, this request must be cleaned up again. But indicator for such a failure is "ret == false". But the actual implementation is checking for "ret == true". The check must be inverted to not loose the information about the TT request directly after it was attempted to be sent out. This should avoid potential request storms.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72231.html
  CVE-2026-72231
• https://bugzilla.suse.com/1277610
  SUSE Bug 1277610

Описание

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: reacquire gw address after skb realloc The pskb_may_pull() called by batadv_bla_is_backbone_gw() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72233.html
  CVE-2026-72233
• https://bugzilla.suse.com/1277612
  SUSE Bug 1277612

Описание

In the Linux kernel, the following vulnerability has been resolved: batman-adv: access unicast_ttvn skb->data only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. This was done correctly for the ethernet header but missed for the unicast_packet pointer.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72234.html
  CVE-2026-72234
• https://bugzilla.suse.com/1275672
  SUSE Bug 1275672

Описание

In the Linux kernel, the following vulnerability has been resolved: mfd: sm501: Fix reference leak on failed device registration When platform_device_register() fails in sm501_register_device(), the embedded struct device in pdev has already been initialized by device_initialize(), but the failure path only reports the error and returns without dropping the device reference for the current platform device: sm501_register_device() -> platform_device_register(pdev) -> device_initialize(&pdev->dev) -> setup_pdev_dma_masks(pdev) -> platform_device_add(pdev) This leads to a reference leak when platform_device_register() fails. Fix this by calling platform_device_put() before returning the error. The issue was identified by a static analysis tool I developed and confirmed by manual review.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72240.html
  CVE-2026-72240
• https://bugzilla.suse.com/1277214
  SUSE Bug 1277214

Описание

In the Linux kernel, the following vulnerability has been resolved: leds: uleds: Fix potential buffer overread The name string supplied by userspace is not guaranteed to be null-terminated, so using strchr() on it might result in a buffer overread. The same thing will happen when said string is used by the LED class device. Fix this by using strnchr() instead and explicitly check that the name string is properly null-terminated.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72241.html
  CVE-2026-72241
• https://bugzilla.suse.com/1277621
  SUSE Bug 1277621

Описание

In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix device reference leak in host1x_device_parse_dt() error path After device_initialize(), the embedded struct device in struct host1x_device should be released through the device core with put_device(). In host1x_device_add(), if host1x_device_parse_dt() fails, the current error path frees the object directly with kfree(device). That bypasses the normal device lifetime handling and leaks the reference held on the embedded struct device. The issue was identified by a static analysis tool I developed and confirmed by manual review. Fix this by using put_device() in the host1x_device_parse_dt() failure path.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72245.html
  CVE-2026-72245
• https://bugzilla.suse.com/1277211
  SUSE Bug 1277211

Описание

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag nf_ct_frag6_reasm() slides the packet head forward to drop the IPv6 fragment header and then unconditionally advances skb->mac_header: skb->mac_header += sizeof(struct frag_hdr); On the NF_INET_LOCAL_OUT defrag path the skb has no link-layer header yet, so skb->mac_header is still the "not set" sentinel (u16)~0U. Adding sizeof(struct frag_hdr) wraps it to a small value (0xffff + 8 == 7), after which skb_mac_header_was_set() wrongly reports a MAC header is present and skb_mac_header() points into the headroom. The reassembler has done this unconditional add since it was introduced; it was harmless while mac_header was a bare pointer, but wrong once mac_header became a u16 offset whose unset state is the ~0U sentinel tested by skb_mac_header_was_set(). The sibling net/ipv6/reassembly.c does the same relocation and does guard the adjustment; mirror the guard here.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72250.html
  CVE-2026-72250
• https://bugzilla.suse.com/1277663
  SUSE Bug 1277663

Описание

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: validate skb_dst() before accessing it tc ingress and openvswitch do not guarantee routing information to be available. These subsystems use the conntrack helper infrastructure, and the SIP helper relies on the skb_dst() to be present if sip_external_media is set to 1 (which is disabled by default as a module parameter). This effectively disables the sip_external_media toggle for these subsystems without resulting in a crash.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72253.html
  CVE-2026-72253
• https://bugzilla.suse.com/1277665
  SUSE Bug 1277665

Описание

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm: fix NULL pointer dereference in graph_callback When q6apm_free_fragments() is called it frees rx_data.buf/tx_data.buf and sets them to NULL under graph->lock. A late DSP buffer-done response can race with this: graph_callback() passes the !graph->ar_graph guard (not yet NULL), acquires the lock, but then dereferences a now-NULL buf pointer to read buf[token].phys, crashing at virtual address 0x10. Add a NULL check for buf inside the mutex-protected section in both the write-done (DATA_CMD_RSP_WR_SH_MEM_EP_DATA_BUFFER_DONE_V2) and read-done (DATA_CMD_RSP_RD_SH_MEM_EP_DATA_BUFFER_V2) handlers and bail out cleanly if buffers have already been freed. This problem is only shown up recently while apr bus was updated to process the commands per service rather from single global queue.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72257.html
  CVE-2026-72257
• https://bugzilla.suse.com/1277201
  SUSE Bug 1277201

Описание

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8183: Release reserved memory on cleanup The MT8183 AFE probe can assign reserved memory with of_reserved_mem_device_init(), but the assignment is never released on driver removal or later probe failures. Register a devm cleanup action so the reserved memory assignment is released consistently, matching newer Mediatek AFE drivers.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72258.html
  CVE-2026-72258
• https://bugzilla.suse.com/1277200
  SUSE Bug 1277200

Описание

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8192: Release reserved memory on cleanup The MT8192 AFE probe calls of_reserved_mem_device_init() and falls back to preallocated buffers when no reserved memory region is available. When the reserved memory assignment succeeds, however, the driver never releases it. Register a devm cleanup action after a successful reserved-memory assignment so the assignment is released on probe failure and driver unbind.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72259.html
  CVE-2026-72259
• https://bugzilla.suse.com/1277675
  SUSE Bug 1277675

Описание

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Validate size in snd_sof_update_control In snd_sof_update_control(), firmware-provided cdata->num_elems is checked against local_cdata->data->size but never against the actual allocation size. If local_cdata->data->size was previously set to an inconsistent value, the memcpy could write past the allocated buffer. Add a bounds check to ensure num_elems fits within the available space in the ipc_control_data allocation before copying.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72261.html
  CVE-2026-72261
• https://bugzilla.suse.com/1277677
  SUSE Bug 1277677

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: tridentfb: fix potential memory leak in trident_pci_probe() In trident_pci_probe(), the memory allocated for modelist using fb_videomode_to_modelist() is not freed in subsequent error paths. Fix that by calling fb_destroy_modelist().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72264.html
  CVE-2026-72264
• https://bugzilla.suse.com/1277197
  SUSE Bug 1277197

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: nvidia: fix potential memory leak in nvidiafb_probe() In nvidiafb_probe(), the memory allocated for modelist in nvidia_set_fbinfo() is not freed in the subsequent error paths. Fix that by calling fb_destroy_modelist().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72265.html
  CVE-2026-72265
• https://bugzilla.suse.com/1277196
  SUSE Bug 1277196

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: vesafb: fix memory leak in vesafb_probe() Since commit 73ce73c30ba9 ("fbdev: Transfer video= option strings to caller; clarify ownership") the string returned from fb_get_options() is expected to be freed by the caller. But the string is not freed in vesafb_probe(). Fix that by freeing the option string after setup.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72266.html
  CVE-2026-72266
• https://bugzilla.suse.com/1277195
  SUSE Bug 1277195

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: carminefb: fix potential memory leak in alloc_carmine_fb() The memory allocated for modelist in fb_videomode_to_modelist() is not freed in the subsequent error path. Fix that by calling fb_destroy_modelist()

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72267.html
  CVE-2026-72267
• https://bugzilla.suse.com/1277194
  SUSE Bug 1277194

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: tdfxfb: fix potential memory leak in tdfxfb_probe() In tdfxfb_probe(), the memory allocated for modelist using fb_videomode_to_modelist() when CONFIG_FB_3DFX_I2C is defined, is not freed in the subsequent error paths. Fix that by calling fb_destroy_modelist().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72268.html
  CVE-2026-72268
• https://bugzilla.suse.com/1277192
  SUSE Bug 1277192

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: uvesafb: fix potential memory leak in uvesafb_probe() Due to an incorrect goto label, memory allocated for modedb and modelist in uvesafb_vbe_init() is not freed in some error paths. Fix this by updating the goto label.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72269.html
  CVE-2026-72269
• https://bugzilla.suse.com/1277191
  SUSE Bug 1277191

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: s3fb: fix potential memory leak in s3_pci_probe() In s3_pci_probe(), the memory allocated for modelist using fb_videomode_to_modelist() is not freed in subsequent error paths. Fix that by calling fb_destroy_modelist()

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72270.html
  CVE-2026-72270
• https://bugzilla.suse.com/1277190
  SUSE Bug 1277190

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: i740fb: fix potential memory leak in i740fb_probe() In i740fb_probe(), the memory allocated in fb_videomode_to_modelist() for modelist is not freed in the error paths. Fix that by calling fb_destroy_modelist().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72271.html
  CVE-2026-72271
• https://bugzilla.suse.com/1277184
  SUSE Bug 1277184

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: radeon: fix potential memory leak in radeonfb_pci_register() The function radeonfb_pci_register() allocates memory for modelist (by calling radeon_check_modes() which calls fb_add_videomode()). The memory is appended to info->modelist, but is not freed in subsequent error paths. Fix this by calling fb_destroy_modelist().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72272.html
  CVE-2026-72272
• https://bugzilla.suse.com/1277177
  SUSE Bug 1277177

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: efifb: fix memory leak in efifb_probe() Since commit 73ce73c30ba9 ("fbdev: Transfer video= option strings to caller; clarify ownership") the string returned from fb_get_options() is expected to be freed by the caller, but the string is not freed in efifb_probe(). Fix that by freeing the option string after setup.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72273.html
  CVE-2026-72273
• https://bugzilla.suse.com/1277176
  SUSE Bug 1277176

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: hecubafb: fix potential memory leak in hecubafb_probe() The memory allocated for pagerefs in fb_deferred_io_init() is not freed on the error path. Fix it by calling fb_deferred_io_cleanup().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72274.html
  CVE-2026-72274
• https://bugzilla.suse.com/1277173
  SUSE Bug 1277173

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: broadsheetfb: fix potential memory leak in broadsheetfb_probe() The memory allocated for pagerefs in fb_deferred_io_init() is not freed on the error path. Fix it by calling fb_deferred_io_cleanup().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72275.html
  CVE-2026-72275
• https://bugzilla.suse.com/1277171
  SUSE Bug 1277171

Описание

In the Linux kernel, the following vulnerability has been resolved: fbdev: metronomefb: fix potential memory leak in metronomefb_probe() The memory allocated for pagerefs in fb_deferred_io_init() is not freed on the error path. Fix it by calling fb_deferred_io_cleanup().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72276.html
  CVE-2026-72276
• https://bugzilla.suse.com/1277170
  SUSE Bug 1277170

Описание

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ignore pending PV EOI if the vCPU has since disabled PV EOIs Ignore KVM's internal "service pending PV EOI" request if the vCPU has disabled PV EOIs since the request was made. Asserting that PV EOIs are enabled can fail if reading guest memory in pv_eoi_get_user() fails, i.e. if pv_eoi_test_and_clr_pending() bails early, *and* the vCPU also disables PV EOIs. kernel BUG at arch/x86/kvm/lapic.c:3338! Oops: invalid opcode: 0000 [#1] SMP CPU: 4 UID: 1000 PID: 890 Comm: pv_eoi_test Not tainted 7.0.0-d585aa5894d8-vm #337 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_lapic_sync_from_vapic+0x12b/0x140 [kvm] Call Trace: <TASK> kvm_arch_vcpu_ioctl_run+0x1075/0x1c30 [kvm] kvm_vcpu_ioctl+0x2d5/0x980 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb5/0xb40 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Modules linked in: kvm_intel kvm irqbypass ---[ end trace 0000000000000000 ]---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72284.html
  CVE-2026-72284
• https://bugzilla.suse.com/1277730
  SUSE Bug 1277730

Описание

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do not allow intra-host migration/mirroring of SNP VMs The intra-host migration/mirroring feature is not fully implemented for SEV-SNP VMs. The proper migration requires additional SNP-specific state such as guest_req_mutex, guest_req_buf, and guest_resp_buf to be transferred or initialized on the destination. The SNP VM mirroring requires vmsa features to be copied as well otherwise ASID would be bound to SNP range while VM is detected as a SEV VM. Reject SNP source VMs in migration/mirroring until proper SNP state transfer is implemented. [sean: let lines poke past 80 chars, tag for stable]

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72286.html
  CVE-2026-72286
• https://bugzilla.suse.com/1277732
  SUSE Bug 1277732

Описание

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix GISC refcount leak on AIF enable failure kvm_s390_gisc_register() registers the guest ISC before pinning the guest interrupt forwarding pages and allocating the AISB bit. If any of the later setup steps fails, the function unwinds the pinned pages and other local state, but does not unregister the GISC reference. Add the missing kvm_s390_gisc_unregister() to the error unwind path.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72290.html
  CVE-2026-72290
• https://bugzilla.suse.com/1277168
  SUSE Bug 1277168

Описание

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: topology: validate vendor array size before parsing sof_parse_token_sets() reads array->size while iterating over topology private data. The loop condition only checks that some data remains, so a malformed topology with a truncated trailing vendor array can make the parser read the size field before a full vendor-array header is available. Validate that the remaining private data contains a complete snd_soc_tplg_vendor_array header before reading array->size. The declared array size check also needs to remain signed. asize is an int, but sizeof(*array) has type size_t, so comparing them directly promotes negative asize values to unsigned and lets them pass the check, as reported in the stable review thread reference below. Cast sizeof(*array) to int when validating the declared array size. This rejects negative, zero and otherwise too-small sizes before the parser dispatches to the tuple-specific code.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72300.html
  CVE-2026-72300
• https://bugzilla.suse.com/1277741
  SUSE Bug 1277741

Описание

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Use overflow checks in control_update size calc In sof_ipc3_control_update(), the expected_size calculation uses firmware-provided cdata->num_elems in arithmetic that could overflow on 32-bit platforms, wrapping to a small value. This would allow the cdata->rhdr.hdr.size comparison to pass with mismatched sizes, potentially leading to out-of-bounds access in snd_sof_update_control. Use check_mul_overflow() and check_add_overflow() to detect and reject overflowed size calculations.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72302.html
  CVE-2026-72302
• https://bugzilla.suse.com/1277744
  SUSE Bug 1277744

Описание

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-control: Fix TOCTOU in sof_ipc4_bytes_put In sof_ipc4_bytes_put(), the copy size is derived from the old data->size in the buffer rather than the incoming new data's size field from ucontrol. If the new data has a different size, the copy uses the wrong length: it may truncate valid data or copy stale bytes. Fix by validating and using the incoming data's sof_abi_hdr.size from ucontrol before copying.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72304.html
  CVE-2026-72304
• https://bugzilla.suse.com/1277746
  SUSE Bug 1277746

Описание

In the Linux kernel, the following vulnerability has been resolved: regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK Compare against -EDEADLK, which is what ww_mutex_lock() actually returns and what every other deadlock check in this file already uses. Function regulator_lock_two() acquires two regulators via regulator_lock_nested() -> ww_mutex_lock(). On contention, ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop the lock it holds and retry the acquisition in the canonical order. However, regulator_lock_two() tests the return value against -EDEADLOCK rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are the same value, so the comparison happens to be correct and the bug is invisible. But on MIPS, SPARC, and PowerPC, those two errors have different values. The test is wrong: a genuine -EDEADLK backoff no longer matches -EDEADLOCK, so instead of unlocking and retrying, the code falls into WARN_ON(ret) and returns with only one of the two regulators locked. In practice, this is a bug only on MIPS, because the regulator core is not built or used on the other two platforms. In general, EDEADLK is preferred over EDEADLOCK for new code.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72314.html
  CVE-2026-72314
• https://bugzilla.suse.com/1277754
  SUSE Bug 1277754

Описание

In the Linux kernel, the following vulnerability has been resolved: cifs: validate DFS referral string offsets parse_dfs_referrals() validates that the response header and referral array fit in the received buffer, but each referral also contains string offsets supplied by the server. Those offsets are used to compute the DfsPath and NetworkAddress string pointers without checking whether they still point inside the response buffer. A malformed referral can therefore make the computed pointer exceed the end of the buffer. The resulting negative max_len is then passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it to kstrndup() as a size_t, allowing strnlen() to read out of bounds. Validate each string offset before deriving the string pointer.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72318.html
  CVE-2026-72318
• https://bugzilla.suse.com/1275939
  SUSE Bug 1275939
• https://bugzilla.suse.com/1276285
  SUSE Bug 1276285

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Reject invalid indirect BO handle in indirect CSD setup v3d_get_cpu_indirect_csd_params() looks up the indirect buffer object from a userspace-supplied handle but never checks the result. A bogus or stale handle makes drm_gem_object_lookup() return NULL, which is then stored in info->indirect and only dereferenced later when the indirect CSD job runs, turning a userspace mistake into a NULL pointer dereference in the kernel. Bail out with -ENOENT as soon as the lookup fails, so the bad handle is rejected at submission time.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72327.html
  CVE-2026-72327
• https://bugzilla.suse.com/1277142
  SUSE Bug 1277142

Описание

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix malformed ISO_END/CONT handling Core specification (Part C vol 4 sec 5.4.5) does not exclude empty ISO_CONT, ISO_END packets. We currently reject them if they are last. If controller sends malformed sequence ISO_START -> rx_len = 4, ISO_CONT skb->len 4, ISO_START that ends payload in ISO_CONT, we leak conn->rx_skb. If controller sends too long ISO_END, we panic on skb_put. If controller sends too short ISO_END we accept it. Fix by marking unfinished ISO_START via conn->rx_skb != NULL. Check skb->len properly before skb_put. Combine the ISO_CONT/END code paths as they require the same initial checks. Reject too short ISO_END packets.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72334.html
  CVE-2026-72334
• https://bugzilla.suse.com/1277770
  SUSE Bug 1277770

Описание

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix adv monitor add failure cleanup hci_add_adv_monitor() publishes a new adv_monitor in hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT offload add path can then fail either locally before the controller add command completes, or in the MSFT add callback. In the current queued management add flow, hci_cmd_sync_work() still invokes mgmt_add_adv_patterns_monitor_complete() with the original pending command after msft_add_monitor_pattern() returns. The buggy scenario involves two paths, with each column showing the order within that path: MSFT add handling MGMT completion 1. insert monitor and handle 1. receive sync error 2. send MSFT add command 2. call add-monitor completion 3. callback sees bad response 3. load cmd->user_data 4. callback frees monitor 4. read monitor->handle Local MSFT setup failures have the other half of the same ownership bug: they return an error after the IDR insertion, but no later code removes the failed monitor from the IDR. Keep ownership with the pending management command until its completion. For normal management adds, the MSFT add callback now records successful controller state and returns errors to its caller. The management completion frees the monitor on non-success after copying the response handle, while resume/reregister callback-error cleanup remains in the MSFT callback. The success path keeps the existing bookkeeping. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x19f/0x330 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] kasan_report+0xe0/0x110 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? 0xffffffffc00d00da ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? hci_cmd_sync_work+0x1ab/0x210 [bluetooth] hci_cmd_sync_work+0x1c0/0x210 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] process_one_work+0x4fd/0xbc0 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 471 on cpu 3 at 285.205389s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] __sys_sendto+0x2bc/0x2d0 __x64_sys_sendto+0x76/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 454 on cpu 2 at 285.217112s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 msft_add_monitor_sync+0x54a/0x570 [bluetooth] hci_add_adv_monitor+0x133/0x180 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72335.html
  CVE-2026-72335
• https://bugzilla.suse.com/1277771
  SUSE Bug 1277771

Описание

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: hold L2CAP conn across debugfs control get_l2cap_conn() looks up an LE hci_conn under hdev protection, but then drops that protection before reading hcon->l2cap_data and before lowpan_control_write() later dereferences conn->hcon. A disconnect or device close can tear down the same L2CAP connection in that window. The buggy scenario involves two paths, with each column showing the order within that path: 6LoWPAN control write: HCI disconnect/device close: 1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches and hcon->l2cap_data. the L2CAP disconnect callback. 2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears protection and returns conn. hcon->l2cap_data and drops the L2CAP connection reference. 3. lowpan_control_write() reads 3. hci_conn_del() removes and drops conn->hcon. the HCI connection. Take a reference to the L2CAP connection with l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that reference after the debugfs command's last use of conn. This mirrors the existing L2CAP ACL receive-side handoff and keeps the connection dereferenceable after leaving hdev protection. Export the existing helper so the bluetooth_6lowpan module can use the same lifetime primitive. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520 The buggy address belongs to the object at ffff888111b9d000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of freed 1024-byte region [ffff888111b9d000, ffff888111b9d400) Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __debugfs_file_get+0xf7/0x400 full_proxy_write+0x9e/0xd0 vfs_write+0x1b0/0x810 ksys_write+0xd2/0x170 dnotify_flush+0x32/0x220 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 l2cap_conn_add+0x45/0x520 l2cap_chan_connect+0xac6/0xd90 l2cap_sock_connect+0x216/0x350 __sys_connect+0x101/0x130 __x64_sys_connect+0x40/0x50 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 hci_conn_hash_flush+0xc0/0x140 hci_dev_close_sync+0x41a/0xb00 hci_dev_close+0x12f/0x160 hci_sock_ioctl+0x157/0x570 sock_do_ioctl+0xf7/0x210 sock_ioctl+0x32f/0x490 __x64_sys_ioctl+0xc7/0x110 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f kasan_record_aux_stack+0xa7/0xc0 insert_work+0x32/0x100 __queue_work+0x262/0xa60 queue_work_on+0xad/0xb0 l2cap_connect_cfm+0x4ef/0x670 hci_le_remote_feat_complete_evt+0x247/0x430 hci_event_packet+0x360/0x6f0 hci_rx_work+0x2ae/0x7a0 process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72336.html
  CVE-2026-72336
• https://bugzilla.suse.com/1277772
  SUSE Bug 1277772

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays Currently defined VF/PF relay actions use regular REQUEST messages only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT messages as this would result in breaking the VFPF ABI protocol and also might trigger an assert on the PF side. (cherry picked from commit 1714d360fc5ae2e0886a69e979095d9c7ff3568a)

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72360.html
  CVE-2026-72360
• https://bugzilla.suse.com/1278074
  SUSE Bug 1278074

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/xe/hw_engine: Fix double-free of managed BO in error path The error path in hw_engine_init() explicitly frees a BO allocated with xe_managed_bo_create_pin_map() via xe_bo_unpin_map_no_vm(). Since the managed BO already has a devm cleanup action registered, this causes a double-free when devm unwinds during probe failure. Remove the explicit free and let devm handle it, consistent with all other xe_managed_bo_create_pin_map() callers. (cherry picked from commit e459a3bdeb117be496d7f229e2ea1f6c9fe4080b)

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72361.html
  CVE-2026-72361
• https://bugzilla.suse.com/1278081
  SUSE Bug 1278081

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pt: Fix NULL pointer dereference in xe_pt_zap_ptes_entry() The page-table walk framework may pass a NULL *child pointer for unpopulated entries. xe_pt_zap_ptes_entry() called container_of(*child) before checking for NULL, then dereferenced the result, causing a crash. Move the container_of() call after a NULL guard, so the function returns early instead of proceeding with an invalid pointer. XE_WARN_ON is kept to help root cause the issue, but we now bail instead of crashing the driver. v2: Comment that triggering XE_WARN_ON is unexpected behavior (Matt Brost) (cherry picked from commit b9297d19d9df5d4b6c994648570c5dcd1cac68ff)

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72362.html
  CVE-2026-72362
• https://bugzilla.suse.com/1277135
  SUSE Bug 1277135

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix a leak when a group is evicted before the tiler OOM is serviced A group ref is tied to the pending tiler_oom_work, so we need to release it if the cancel was effective.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72386.html
  CVE-2026-72386
• https://bugzilla.suse.com/1277130
  SUSE Bug 1277130

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix potential invalid pointer deref in group_process_tiler_oom() If heaps is an ERR_PTR(), panthor_heap_pool_put() will deref an invalid pointer. Make sure we set it to NULL in that case.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-72387.html
  CVE-2026-72387
• https://bugzilla.suse.com/1277819
  SUSE Bug 1277819

Описание

In the Linux kernel, the following vulnerability has been resolved: net: phy: sfp: free mii_bus in sfp_i2c_mdiobus_destroy sfp_i2c_mdiobus_create() allocates the I2C MDIO bus with mdio_i2c_alloc(), a plain (non-devm) allocation, and registers it. sfp_i2c_mdiobus_destroy() only unregisters the bus and clears sfp->i2c_mii without calling mdiobus_free(). As the only reference to the bus is then cleared, the struct mii_bus is leaked. This is hit whenever a copper/RollBall SFP module that instantiated an MDIO bus is removed: sfp_sm_main() takes the global teardown path and calls sfp_i2c_mdiobus_destroy(). sfp_cleanup(), on driver unbind, frees sfp->i2c_mii directly, which is why the leak only triggered on module hot-removal and not on unbind. Free the bus in sfp_i2c_mdiobus_destroy() to match the allocation done in sfp_i2c_mdiobus_create().

Затронутые продукты