Описание
Security update for the Linux Kernel
The SUSE Linux Enterprise 12 SP5 kernel was updated to fix various security issues:
The following security issues were fixed:
- CVE-2025-40100: btrfs: do not assert we found block group item when creating free space tree (bsc#1252918).
- CVE-2025-68741: scsi: qla2xxx: Fix improper freeing of purex item (bsc#1255703 bsc#1275737).
- CVE-2026-23059: scsi: qla2xxx: Sanitize payload size to prevent member overflow (bsc#1257737 bsc#1275737).
- CVE-2026-46195: smb: client: validate dacloffset before building DACL pointers (bsc#1266860).
- CVE-2026-64370: posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path (bsc#1273805).
- CVE-2026-64379: smb: client: mask server-provided mode to 07777 in modefromsid (bsc#1273029).
- CVE-2026-64413: netfilter: ebtables: zero chainstack array (bsc#1274082).
- CVE-2026-64435: audit: Fix data races of skb_queue_len() readers on audit_queue (bsc#1274080).
- CVE-2026-64539: Bluetooth: eir: Fix stack OOB write when prepending the Flags AD (bsc#1273338).
- CVE-2026-64546: drm/edid: fix OOB read in drm_parse_tiled_block() (bsc#1273334).
- CVE-2026-64549: Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup() (bsc#1273341).
- CVE-2026-72250: netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag (bsc#1277663).
- CVE-2026-72310: smb: client: fix overflow in passthrough ioctl bounds check (bsc#1277750).
- CVE-2026-72416: netfilter: nft_compat: ebtables emulation must reject non-bridge targets (bsc#1278041).
- CVE-2026-72428: bpf: Fix stack slot index in nospec checks (bsc#1278050).
- CVE-2026-74620: net/sched: act_gact, act_police: range check the fallback control action (bsc#1277044).
- CVE-2026-74683: Input: evdev - sanitize event type index when fetching event masks (bsc#1277387).
- CVE-2026-74720: bpf: Preserve pointer state for commuted arithmetic (bsc#1276574).
- CVE-2026-74748: netfilter: ipset: fix refcount race between list:set GC and swap (bsc#1277578).
- CVE-2026-80572: Input: byd - synchronize timer deletion before freeing private data (bsc#1277338).
- CVE-2026-80579: fbdev: clear fb_info->mode before deleting a videomode (bsc#1277260).
- CVE-2026-80637: netfilter: synproxy: fix unaligned memory access in timestamp adjustment (bsc#1278343).
- CVE-2026-80704: drm/amd/display: use proper context for logging (bsc#1278431).
- CVE-2026-80717: sctp: validate Adaptation Indication parameter length (bsc#1277836).
- CVE-2026-80764: Bluetooth: hci_event: fix LE list UAF on reset (bsc#1279493).
- CVE-2026-80808: ext4: stop retrying saturated xattr cache entries (bsc#1279795).
- CVE-2026-80809: ocfs2: fix missing metadata reservation for large xattrs (bsc#1279606).
- CVE-2026-80879: ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write (bsc#1279494).
- CVE-2026-80881: ocfs2: fix buffer head management in ocfs2_read_blocks() (bsc#1279496).
- CVE-2026-80888: drm/vmwgfx: drop dma_buf reference on foreign-fd prime import (bsc#1279455).
- CVE-2026-80978: net: cap advertised IP tunnel headroom (bsc#1280253).
- CVE-2026-80989: net: thunderbolt: Mark the connection down when bringing it up fails (bsc#1280305).
- CVE-2026-89494: ocfs2: validate lengths in dlm_mig_lockres_handler (bsc#1280520).
- CVE-2026-89495: ocfs2: bound namelen in dlm_migrate_request_handler (bsc#1280569).
- CVE-2026-89537: SUNRPC: Reject short RFC 4121 MIC tokens in gss_krb5_verify_mic_v2 (bsc#1280713).
- CVE-2026-89559: libnvdimm/labels: Prevent integer overflow in __nd_label_validate() (bsc#1280554).
- CVE-2026-89606: ecryptfs: reject too-small tag 70 packets (bsc#1280469).
- CVE-2026-89607: ecryptfs: reject oversized encrypted_key_size in parse_tag_3_packet (bsc#1281792).
- CVE-2026-89608: ecryptfs: pass packet set buffer size to parser (bsc#1280826).
- CVE-2026-89631: smb: client: reject a tree connect response whose byte count is too small (bsc#1280496).
- CVE-2026-89636: smb: client: clear ce->tgthint in free_tgts() (bsc#1281042).
- CVE-2026-89638: smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions (bsc#1281046).
- CVE-2026-89640: cifs: fix loff_t underflow in cifs_remap_file_range() when len == 0 (bsc#1280950).
- CVE-2026-89642: cifs: call pagecache_isize_extended() in cifs_setsize() when extending (bsc#1280970).
- CVE-2026-89656: libceph: reject buckets with mismatched CRUSH ids (bsc#1280563).
- CVE-2026-89821: drm/amd/display: avoid divide-by-zero in __is_lut_linear() (bsc#1280996).
- CVE-2026-89842: scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started (bsc#1275737 bsc#1281189).
- CVE-2026-89843: scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak (bsc#1275737 bsc#1280984).
- CVE-2026-89844: scsi: qla2xxx: Hold vport_slock for host map update in report ID acquisition (bsc#1275737 bsc#1281183).
- CVE-2026-89845: scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry() (bsc#1275737 bsc#1281001).
- CVE-2026-89846: scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read (bsc#1275737 bsc#1281184).
- CVE-2026-89847: scsi: qla2xxx: Avoid double completion in async IOCB timeout (bsc#1275737 bsc#1281185).
- CVE-2026-89848: scsi: qla2xxx: Quiesce response IRQ before freeing request queue (bsc#1275737 bsc#1281179).
- CVE-2026-89849: scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path (bsc#1275737 bsc#1281180).
- CVE-2026-89850: scsi: qla2xxx: Don't query firmware state while chip is down (bsc#1275737 bsc#1281181).
- CVE-2026-89851: scsi: qla2xxx: Fix FCE trace enable parsing in debugfs (bsc#1275737 bsc#1281175).
- CVE-2026-89852: scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state() (bsc#1275737 bsc#1281174).
- CVE-2026-89853: scsi: qla2xxx: Fix FCE trace use-after-free during firmware dump (bsc#1275737 bsc#1281173).
- CVE-2026-89854: scsi: qla2xxx: Fix cs84xx use-after-free on host teardown (bsc#1275737 bsc#1281165).
- CVE-2026-89855: scsi: qla2xxx: Serialize flash version read in reset handler (bsc#1275737 bsc#1281164).
- CVE-2026-89857: scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject (bsc#1275737 bsc#1281211).
- CVE-2026-89858: scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions() (bsc#1275737 bsc#1281334).
- CVE-2026-89859: scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak (bsc#1275737 bsc#1281333).
- CVE-2026-89860: scsi: qla2xxx: Initialize NVMe abort_work once at submission (bsc#1275737 bsc#1281357).
- CVE-2026-89861: scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition() (bsc#1275737 bsc#1281353).
- CVE-2026-89862: scsi: qla2xxx: Fix BSG job leak on validate flash image error path (bsc#1275737 bsc#1281214).
- CVE-2026-89863: scsi: qla2xxx: edif: Fix NULL pointer deref in RX SA delete check (bsc#1275737 bsc#1281251).
- CVE-2026-89864: scsi: qla2xxx: Bound i2c->length in I2C bsg handlers (bsc#1275737 bsc#1281253).
- CVE-2026-89865: scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers (bsc#1275737 bsc#1281254).
- CVE-2026-90015: xhci: fix lost bounce buffers on TDs spanning several ring segments (bsc#1281080).
- CVE-2026-90057: slip: remove slip_hangup() to fix use-after-free in slip_receive_buf() (bsc#1281650).
- CVE-2026-90081: net/rds: use wq_has_sleeper() in rds_cong_map_updated() (bsc#1281490).
- CVE-2026-90103: NFSv4.2: fix LAYOUTSTATS send buffer exhaustion (bsc#1281538).
- CVE-2026-90125: smb: client: fix request buffer leak in smb2_new_read_req() (bsc#1281580).
- CVE-2026-90138: vsock: don't check the listener's sk_err in vsock_accept() (bsc#1281535).
- CVE-2026-90227: nvme: fine-granular CAP_SYS_ADMIN for nvme io commands (bsc#1281705).
- CVE-2026-90434: isofs: release zisofs block pointer buffer head (bsc#1281993).
- CVE-2026-93210: smb: client: harden DFS cache against invalid target hints (bsc#1282737).
- CVE-2026-93231: lockd: fix swapped arguments in nlmsvc_match_ip() (bsc#1282778).
- CVE-2026-93242: scsi: qla2xxx: Fix response queue over-consumption in __qla_consume_iocb() (bsc#1275737 bsc#1282684).
- CVE-2026-93262: md/raid5-ppl: fix use-after-free in ppl_do_flush() (bsc#1283004).
- CVE-2026-93269: ext4: fix circular lock dependency in ext4_ext_migrate (bsc#1282810).
- CVE-2026-93785: cifs: validate idmap key payload length (bsc#1282869).
- CVE-2026-93787: smb: client: bound dirent name against end of SMB response in cifs_filldir (bsc#1282932).
- CVE-2026-93817: perf: Fix addr_filter_ranges lifetime (bsc#1283017).
- CVE-2026-97527: scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock (bsc#1275737 bsc#1283343).
- CVE-2026-97528: scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error (bsc#1275737 bsc#1283360).
- CVE-2026-97530: scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature (bsc#1275737 bsc#1283159).
- CVE-2026-97531: scsi: qla2xxx: Skip vport under deletion in report ID acquisition (bsc#1275737 bsc#1283834).
- CVE-2026-97535: scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size (bsc#1275737 bsc#1283837).
- CVE-2026-97537: scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking (bsc#1275737 bsc#1283453).
- CVE-2026-97612: net: mpls: clear inner_protocol when the last label is popped (bsc#1283967).
- CVE-2026-97926: ufs: validate cylinder group metadata before caching it (bsc#1283887).
- CVE-2026-97954: net/rds: fix tcp stream corruption with large pages (bsc#1283113).
- CVE-2026-97965: vxlan: initialize _md in vxlan_xmit_one() (bsc#1282963).
- CVE-2026-98014: net/mlx5: E-Switch, prevent mc_list repopulation during vport disable (bsc#1283668).
- CVE-2026-98022: net: cap tx_queue_len at S16_MAX to prevent oversized ring allocations (bsc#1283810).
- CVE-2026-98071: net/rds: clear cp_flags bits individually in rds_conn_path_reset() (bsc#1283842).
- CVE-2026-98072: net/rds: use wq_has_sleeper() in release_in_xmit() (bsc#1283846).
- CVE-2026-98074: bonding: do not clear curr_active_slave prematurely when releasing all slaves (bsc#1283871).
- CVE-2026-98078: ipvs: fix reversed sequence option serialization (bsc#1284150).
- CVE-2026-98095: af_packet: Don't cast tpacket_hdr.tp_len to int in tpacket_parse_header() (bsc#1283921).
- CVE-2026-98116: ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF (bsc#1283878).
- CVE-2026-98158: ppp_async: drop the errored frame instead of resetting its headroom (bsc#1283933).
- CVE-2026-98257: rds: ib: use rds_conn_drop() on protocol version mismatch (bsc#1284346).
- CVE-2026-98282: powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba (bsc#1284360).
- CVE-2026-98386: scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot (bsc#1275737 bsc#1285668).
- CVE-2026-98432: ipv4: free inet_opt and ireq_opt after an RCU grace period (bsc#1285685).
The following non security issues were fixed:
- net/rds: use clear_bit_unlock() in release_refill() (git-fixes).
- nvmet-tcp: do not continue for invalid icreq (git-fixes).
- ocfs2: reserve xattr value tree metadata only once (git-fixes).
- rds: add missing barrier to release_refill (git-fixes).
- Revert 'mkspec: Exclude rt flavor from kernel-syms dependencies' (bsc#1244337). - Revert 'rpm/mkspec: Fix missing kernel-syms-rt creation' (bsc#1244337).
Список пакетов
SUSE Linux Enterprise Live Patching 12 SP5
SUSE Linux Enterprise Server 12 SP5-LTSS
SUSE Linux Enterprise Server LTSS Extended Security 12 SP5
Ссылки
- Link for SUSE-SU-2026:5121-1
- E-Mail link for SUSE-SU-2026:5121-1
- SUSE Security Ratings
- SUSE Bug 1244337
- SUSE Bug 1245695
- SUSE Bug 1248669
- SUSE Bug 1252918
- SUSE Bug 1255703
- SUSE Bug 1255721
- SUSE Bug 1257737
- SUSE Bug 1258422
- SUSE Bug 1258469
- SUSE Bug 1266860
- SUSE Bug 1269655
- SUSE Bug 1273029
- SUSE Bug 1273250
- SUSE Bug 1273327
- SUSE Bug 1273334
- SUSE Bug 1273338
- SUSE Bug 1273341
Описание
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Protect mgmt_pending list with its own lock This uses a mutex to protect from concurrent access of mgmt_pending list which can cause crashes like: ================================================================== BUG: KASAN: slab-use-after-free in hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91 Read of size 2 at addr ffff0000c48885b2 by task syz.4.334/7318 CPU: 0 UID: 0 PID: 7318 Comm: syz.4.334 Not tainted 6.15.0-rc7-syzkaller-g187899f4124a #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack+0x30/0x40 lib/dump_stack.c:94 dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120 print_address_description+0xa8/0x254 mm/kasan/report.c:408 print_report+0x68/0x84 mm/kasan/report.c:521 kasan_report+0xb0/0x110 mm/kasan/report.c:634 __asan_report_load2_noabort+0x20/0x2c mm/kasan/report_generic.c:379 hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91 mgmt_pending_find+0x7c/0x140 net/bluetooth/mgmt_util.c:223 pending_find net/bluetooth/mgmt.c:947 [inline] remove_adv_monitor+0x44/0x1a4 net/bluetooth/mgmt.c:5445 hci_mgmt_cmd+0x780/0xc00 net/bluetooth/hci_sock.c:1712 hci_sock_sendmsg+0x544/0xbb0 net/bluetooth/hci_sock.c:1832 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] sock_write_iter+0x25c/0x378 net/socket.c:1131 new_sync_write fs/read_write.c:591 [inline] vfs_write+0x62c/0x97c fs/read_write.c:684 ksys_write+0x120/0x210 fs/read_write.c:736 __do_sys_write fs/read_write.c:747 [inline] __se_sys_write fs/read_write.c:744 [inline] __arm64_sys_write+0x7c/0x90 fs/read_write.c:744 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Allocated by task 7037: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x54 mm/kasan/generic.c:562 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x9c/0xb4 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4327 [inline] __kmalloc_noprof+0x2fc/0x4c8 mm/slub.c:4339 kmalloc_noprof include/linux/slab.h:909 [inline] sk_prot_alloc+0xc4/0x1f0 net/core/sock.c:2198 sk_alloc+0x44/0x3ac net/core/sock.c:2254 bt_sock_alloc+0x4c/0x300 net/bluetooth/af_bluetooth.c:148 hci_sock_create+0xa8/0x194 net/bluetooth/hci_sock.c:2202 bt_sock_create+0x14c/0x24c net/bluetooth/af_bluetooth.c:132 __sock_create+0x43c/0x91c net/socket.c:1541 sock_create net/socket.c:1599 [inline] __sys_socket_create net/socket.c:1636 [inline] __sys_socket+0xd4/0x1c0 net/socket.c:1683 __do_sys_socket net/socket.c:1697 [inline] __se_sys_socket net/socket.c:1695 [inline] __arm64_sys_socket+0x7c/0x94 net/socket.c:1695 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Freed by task 6607: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x68/0x88 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline ---truncated---
Затронутые продукты
Ссылки
- CVE-2025-38117
- SUSE Bug 1245695
Описание
In the Linux kernel, the following vulnerability has been resolved: pinmux: fix race causing mux_owner NULL with active mux_usecount commit 5a3e85c3c397 ("pinmux: Use sequential access to access desc->pinmux data") tried to address the issue when two client of the same gpio calls pinctrl_select_state() for the same functionality, was resulting in NULL pointer issue while accessing desc->mux_owner. However, issue was not completely fixed due to the way it was handled and it can still result in the same NULL pointer. The issue occurs due to the following interleaving: cpu0 (process A) cpu1 (process B) pin_request() { pin_free() { mutex_lock() desc->mux_usecount--; //becomes 0 .. mutex_unlock() mutex_lock(desc->mux) desc->mux_usecount++; // becomes 1 desc->mux_owner = owner; mutex_unlock(desc->mux) mutex_lock(desc->mux) desc->mux_owner = NULL; mutex_unlock(desc->mux) This sequence leads to a state where the pin appears to be in use (`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can cause NULL pointer on next pin_request on the same pin. Ensure that updates to mux_usecount and mux_owner are performed atomically under the same lock. Only clear mux_owner when mux_usecount reaches zero and no new owner has been assigned.
Затронутые продукты
Ссылки
- CVE-2025-38632
- SUSE Bug 1248669
Описание
In the Linux kernel, the following vulnerability has been resolved: btrfs: do not assert we found block group item when creating free space tree Currently, when building a free space tree at populate_free_space_tree(), if we are not using the block group tree feature, we always expect to find block group items (either extent items or a block group item with key type BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with btrfs_search_slot_for_read(), so we assert that we found an item. However this expectation is wrong since we can have a new block group created in the current transaction which is still empty and for which we still have not added the block group's item to the extent tree, in which case we do not have any items in the extent tree associated to the block group. The insertion of a new block group's block group item in the extent tree happens at btrfs_create_pending_block_groups() when it calls the helper insert_block_group_item(). This typically is done when a transaction handle is released, committed or when running delayed refs (either as part of a transaction commit or when serving tickets for space reservation if we are low on free space). So remove the assertion at populate_free_space_tree() even when the block group tree feature is not enabled and update the comment to mention this case. Syzbot reported this with the following stack trace: BTRFS info (device loop3 state M): rebuilding free space tree assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115 ------------[ cut here ]------------ kernel BUG at fs/btrfs/free-space-tree.c:1115! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115 Code: ff ff e8 d3 (...) RSP: 0018:ffffc9000430f780 EFLAGS: 00010246 RAX: 0000000000000043 RBX: ffff88805b709630 RCX: fea61d0e2e79d000 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffffc9000430f8b0 R08: ffffc9000430f4a7 R09: 1ffff92000861e94 R10: dffffc0000000000 R11: fffff52000861e95 R12: 0000000000000001 R13: 1ffff92000861f00 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f424d9fe6c0(0000) GS:ffff888125afc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd78ad212c0 CR3: 0000000076d68000 CR4: 00000000003526f0 Call Trace: <TASK> btrfs_rebuild_free_space_tree+0x1ba/0x6d0 fs/btrfs/free-space-tree.c:1364 btrfs_start_pre_rw_mount+0x128f/0x1bf0 fs/btrfs/disk-io.c:3062 btrfs_remount_rw fs/btrfs/super.c:1334 [inline] btrfs_reconfigure+0xaed/0x2160 fs/btrfs/super.c:1559 reconfigure_super+0x227/0x890 fs/super.c:1076 do_remount fs/namespace.c:3279 [inline] path_mount+0xd1a/0xfe0 fs/namespace.c:4027 do_mount fs/namespace.c:4048 [inline] __do_sys_mount fs/namespace.c:4236 [inline] __se_sys_mount+0x313/0x410 fs/namespace.c:4213 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f424e39066a Code: d8 64 89 02 (...) RSP: 002b:00007f424d9fde68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f424d9fdef0 RCX: 00007f424e39066a RDX: 0000200000000180 RSI: 0000200000000380 RDI: 0000000000000000 RBP: 0000200000000180 R08: 00007f424d9fdef0 R09: 0000000000000020 R10: 0000000000000020 R11: 0000000000000246 R12: 0000200000000380 R13: 00007f424d9fdeb0 R14: 0000000000000000 R15: 00002000000002c0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]---
Затронутые продукты
Ссылки
- CVE-2025-40100
- SUSE Bug 1252918
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix improper freeing of purex item In qla2xxx_process_purls_iocb(), an item is allocated via qla27xx_copy_multiple_pkt(), which internally calls qla24xx_alloc_purex_item(). The qla24xx_alloc_purex_item() function may return a pre-allocated item from a per-adapter pool for small allocations, instead of dynamically allocating memory with kzalloc(). An error handling path in qla2xxx_process_purls_iocb() incorrectly uses kfree() to release the item. If the item was from the pre-allocated pool, calling kfree() on it is a bug that can lead to memory corruption. Fix this by using the correct deallocation function, qla24xx_free_purex_item(), which properly handles both dynamically allocated and pre-allocated items.
Затронутые продукты
Ссылки
- CVE-2025-68741
- SUSE Bug 1255703
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Clear cmds after chip reset Commit aefed3e5548f ("scsi: qla2xxx: target: Fix offline port handling and host reset handling") caused two problems: 1. Commands sent to FW, after chip reset got stuck and never freed as FW is not going to respond to them anymore. 2. BUG_ON(cmd->sg_mapped) in qlt_free_cmd(). Commit 26f9ce53817a ("scsi: qla2xxx: Fix missed DMA unmap for aborted commands") attempted to fix this, but introduced another bug under different circumstances when two different CPUs were racing to call qlt_unmap_sg() at the same time: BUG_ON(!valid_dma_direction(dir)) in dma_unmap_sg_attrs(). So revert "scsi: qla2xxx: Fix missed DMA unmap for aborted commands" and partially revert "scsi: qla2xxx: target: Fix offline port handling and host reset handling" at __qla2x00_abort_all_cmds.
Затронутые продукты
Ссылки
- CVE-2025-68745
- SUSE Bug 1255721
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Free sp in error path to fix system crash System crash seen during load/unload test in a loop, [61110.449331] qla2xxx [0000:27:00.0]-0042:0: Disabled MSI-X. [61110.467494] ============================================================================= [61110.467498] BUG qla2xxx_srbs (Tainted: G OE -------- --- ): Objects remaining in qla2xxx_srbs on __kmem_cache_shutdown() [61110.467501] ----------------------------------------------------------------------------- [61110.467502] Slab 0x000000000ffc8162 objects=51 used=1 fp=0x00000000e25d3d85 flags=0x57ffffc0010200(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [61110.467509] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467513] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467515] Call Trace: [61110.467516] <TASK> [61110.467519] dump_stack_lvl+0x34/0x48 [61110.467526] slab_err.cold+0x53/0x67 [61110.467534] __kmem_cache_shutdown+0x16e/0x320 [61110.467540] kmem_cache_destroy+0x51/0x160 [61110.467544] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467607] ? __do_sys_delete_module.constprop.0+0x178/0x280 [61110.467613] ? syscall_trace_enter.constprop.0+0x145/0x1d0 [61110.467616] ? do_syscall_64+0x5c/0x90 [61110.467619] ? exc_page_fault+0x62/0x150 [61110.467622] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [61110.467626] </TASK> [61110.467627] Disabling lock debugging due to kernel taint [61110.467635] Object 0x0000000026f7e6e6 @offset=16000 [61110.467639] ------------[ cut here ]------------ [61110.467639] kmem_cache_destroy qla2xxx_srbs: Slab cache still has objects when called from qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467659] WARNING: CPU: 53 PID: 455206 at mm/slab_common.c:520 kmem_cache_destroy+0x14d/0x160 [61110.467718] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G B OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467720] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467721] RIP: 0010:kmem_cache_destroy+0x14d/0x160 [61110.467724] Code: 99 7d 07 00 48 89 ef e8 e1 6a 07 00 eb b3 48 8b 55 60 48 8b 4c 24 20 48 c7 c6 70 fc 66 90 48 c7 c7 f8 ef a1 90 e8 e1 ed 7c 00 <0f> 0b eb 93 c3 cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 [61110.467725] RSP: 0018:ffffa304e489fe80 EFLAGS: 00010282 [61110.467727] RAX: 0000000000000000 RBX: ffffffffc0d9a860 RCX: 0000000000000027 [61110.467729] RDX: ffff8fd5ff9598a8 RSI: 0000000000000001 RDI: ffff8fd5ff9598a0 [61110.467730] RBP: ffff8fb6aaf78700 R08: 0000000000000000 R09: 0000000100d863b7 [61110.467731] R10: ffffa304e489fd20 R11: ffffffff913bef48 R12: 0000000040002000 [61110.467731] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [61110.467733] FS: 00007f64c89fb740(0000) GS:ffff8fd5ff940000(0000) knlGS:0000000000000000 [61110.467734] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [61110.467735] CR2: 00007f0f02bfe000 CR3: 00000020ad6dc005 CR4: 0000000000770ee0 [61110.467736] PKRU: 55555554 [61110.467737] Call Trace: [61110.467738] <TASK> [61110.467739] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467755] ? __do_sys_delete_module.constprop.0+0x178/0x280 Free sp in the error path to fix the crash.
Затронутые продукты
Ссылки
- CVE-2025-71232
- SUSE Bug 1258422
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Delay module unload while fabric scan in progress System crash seen during load/unload test in a loop. [105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086 [105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0 [105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000 [105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000 [105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0 [105954.384928] PKRU: 55555554 [105954.384929] Call Trace: [105954.384931] <IRQ> [105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx] [105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx] [105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx] [105954.384999] ? __wake_up_common+0x80/0x190 [105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx] [105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx] [105954.385040] ? __handle_irq_event_percpu+0x3d/0x190 [105954.385044] ? handle_irq_event+0x58/0xb0 [105954.385046] ? handle_edge_irq+0x93/0x240 [105954.385050] ? __common_interrupt+0x41/0xa0 [105954.385055] ? common_interrupt+0x3e/0xa0 [105954.385060] ? asm_common_interrupt+0x22/0x40 The root cause of this was that there was a free (dma_free_attrs) in the interrupt context. There was a device discovery/fabric scan in progress. A module unload was issued which set the UNLOADING flag. As part of the discovery, after receiving an interrupt a work queue was scheduled (which involved a work to be queued). Since the UNLOADING flag is set, the work item was not allocated and the mapped memory had to be freed. The free occurred in interrupt context leading to system crash. Delay the driver unload until the fabric scan is complete to avoid the crash.
Затронутые продукты
Ссылки
- CVE-2025-71235
- SUSE Bug 1258469
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Sanitize payload size to prevent member overflow In qla27xx_copy_fpin_pkt() and qla27xx_copy_multiple_pkt(), the frame_size reported by firmware is used to calculate the copy length into item->iocb. However, the iocb member is defined as a fixed-size 64-byte array within struct purex_item. If the reported frame_size exceeds 64 bytes, subsequent memcpy calls will overflow the iocb member boundary. While extra memory might be allocated, this cross-member write is unsafe and triggers warnings under CONFIG_FORTIFY_SOURCE. Fix this by capping total_bytes to the size of the iocb member (64 bytes) before allocation and copying. This ensures all copies remain within the bounds of the destination structure member.
Затронутые продукты
Ссылки
- CVE-2026-23059
- SUSE Bug 1257737
Описание
In the Linux kernel, the following vulnerability has been resolved: smb: client: validate dacloffset before building DACL pointers parse_sec_desc(), build_sec_desc(), and the chown path in id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd before proving a DACL header fits inside the returned security descriptor. On 32-bit builds a malicious server can return dacloffset near U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip past the later pointer-based bounds checks. build_sec_desc() and id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped pointer in the chmod/chown rewrite paths. Validate dacloffset numerically before building any DACL pointer and reuse the same helper at the three DACL entry points.
Затронутые продукты
Ссылки
- CVE-2026-46195
- SUSE Bug 1266860
Описание
In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count.
Затронутые продукты
Ссылки
- CVE-2026-53059
- SUSE Bug 1269655
- SUSE Bug 1270376
Описание
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject overlapping data areas in SMB2 responses Commit 53b7c271f06b ("smb: client: restrict implied bcc[0] exemption to responses without data area") restricted the implied bcc[0] length exception to responses without a data area. However, the overlap handling in __smb2_calc_size() clears data_length, which can make an invalid response appear to have no data area and so qualify for the exception. Track data area overlap separately and reject such responses before applying the length compatibility exceptions.
Затронутые продукты
Ссылки
- CVE-2026-64257
- SUSE Bug 1273250
- SUSE Bug 1279998
Описание
In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference via get_pid() and stores it in timer.it.cpu.pid. If the subsequent posix_cpu_timer_set() call fails, the function returns immediately without calling posix_cpu_timer_del() to release the pid reference, causing a leak. Fix it by calling posix_cpu_timer_del() before the unlock-and-return on the error path, consistent with the other exit paths in the same function.
Затронутые продукты
Ссылки
- CVE-2026-64370
- SUSE Bug 1273805
Описание
In the Linux kernel, the following vulnerability has been resolved: smb: client: mask server-provided mode to 07777 in modefromsid When modefromsid is active, parse_dacl() applies the server-provided sub_auth[2] value from the NFS mode SID to cf_mode without masking to 07777. Apply the correct masking, same as in the read path.
Затронутые продукты
Ссылки
- CVE-2026-64379
- SUSE Bug 1273029
Описание
In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: zero chainstack array sashiko reports: looking at ebtables table translation, could a sparse cpu_possible_mask lead to an uninitialized pointer free? If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible, but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at CPU 2, the cleanup loop will blindly decrement and call vfree() on newinfo->chainstack[1]. Not a real-world bug, such allocation isn't expected to fail in the first place.
Затронутые продукты
Ссылки
- CVE-2026-64413
- SUSE Bug 1274082
Описание
In the Linux kernel, the following vulnerability has been resolved: audit: Fix data races of skb_queue_len() readers on audit_queue Multiple readers access audit_queue.qlen via skb_queue_len() without holding the queue lock or using READ_ONCE(), while kauditd writes to this field via the skb_dequeue() -> __skb_unlink() path with WRITE_ONCE() protected by a spinlock. This constitutes data races. All affected skb_queue_len(&audit_queue) call sites: - kauditd_thread() wait_event_freezable() condition - audit_receive_msg() AUDIT_GET handler (s.backlog assignment) - audit_receive() backlog check - audit_log_start() backlog check and pr_warn() KCSAN reports the following conflicting access pattern (one example): ================================================================== BUG: KCSAN: data-race in audit_log_start / skb_dequeue write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57: skb_dequeue+0x70/0xf0 kauditd_send_queue+0x71/0x220 kauditd_thread+0x1cb/0x430 kthread+0x1c2/0x210 ret_from_fork+0x162/0x1a0 ret_from_fork_asm+0x1a/0x30 read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1: audit_log_start+0x2a0/0x6b0 audit_core_dumps+0x64/0xa0 do_coredump+0x14b/0x1260 get_signal+0xeb2/0xf70 arch_do_signal_or_restart+0x41/0x170 exit_to_user_mode_loop+0xa2/0x1c0 do_syscall_64+0x1a3/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0xe0 value changed: 0x00000001 -> 0x00000000 ================================================================== Resolve the race by switching to lockless helper skb_queue_len_lockless(), which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE() write accesses already present on the writer side. [PM: line length tweak]
Затронутые продукты
Ссылки
- CVE-2026-64435
- SUSE Bug 1274080
Описание
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Unconditionally recompute CR8 intercept on PPR update The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits when the guest's virtual TPR falls under the specified threshold, allowing KVM to inject previously masked interrupts. KVM handles these VM exits in handle_tpr_below_threshold(). Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits") optimized this function by calling apic_update_ppr() instead of raising KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is a pending, deliverable interrupt. However, if there are no new interrupts pending, apic_update_ppr() does not issue the request. Thus, kvm_lapic_update_cr8_intercept() and vmx_update_cr8_intercept() are not called before VM entry, which results in a high, stale TPR_THRESHOLD. This is problematic due to the following sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM: The following check is performed if the "use TPR shadow" VM-execution control is 1 and the "virtualize APIC accesses" and "virtual-interrupt delivery" VM-execution controls are both 0: the value of bits 3:0 of the TPR threshold VM-execution control field should not be greater than the value of bits 7:4 of VTPR. This error condition is typically not observed when KVM runs on a bare metal system because modern processors support APICv, which enables virtual-interrupt delivery, and which KVM uses when possible. This causes the processor to no longer generate TPR-below-threshold exits and to no longer check TPR_THRESHOLD on entry. However, when running on older platforms, or under nested virtualization on a hypervisor that does not support virtual-interrupt delivery and enforces this check (like Hyper-V) this can cause a VM entry failure with hardware error 0x7, as seen in [1]. Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT). Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in apic_update_ppr(), as they now become redundant. This ensures that any path that updates the guest's PPR also figures out if KVM needs to wait for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM).
Затронутые продукты
Ссылки
- CVE-2026-64513
- SUSE Bug 1273327
Описание
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix stack OOB write when prepending the Flags AD eir_create_adv_data() builds the advertising data into a fixed-size buffer ("size", 31 for the legacy path). It may prepend a 3-byte "Flags" AD structure (LE_AD_NO_BREDR on an LE-only controller) and then copies the per-instance data without checking that it still fits: memcpy(ptr, adv->adv_data, adv->adv_data_len); tlv_data_max_len() only reserves those 3 bytes when the user-supplied flags carry a managed-flags bit, so an instance added with flags == 0 is accepted with adv_data_len up to the full buffer. At advertise time the flags are still prepended, and the memcpy() writes 3 + adv_data_len bytes into the size-byte buffer: BUG: KASAN: stack-out-of-bounds in eir_create_adv_data (net/bluetooth/eir.c:301) Write of size 31 at addr ffff88800a547bdc by task kworker/u9:0/65 Workqueue: hci0 hci_cmd_sync_work __asan_memcpy (mm/kasan/shadow.c:106) eir_create_adv_data (net/bluetooth/eir.c:301) hci_update_adv_data_sync (net/bluetooth/hci_sync.c:1310) hci_schedule_adv_instance_sync (net/bluetooth/hci_sync.c:1817) hci_cmd_sync_work (net/bluetooth/hci_sync.c:332) This frame has 1 object: [32, 64) 'cp' The "Flags" structure is added by the kernel, not requested by userspace, so only prepend it when it fits together with the instance advertising data; when there is no room for both, drop the flags rather than the user-provided data. Reachable by a local user with CAP_NET_ADMIN owning an LE-only controller on the legacy advertising path.
Затронутые продукты
Ссылки
- CVE-2026-64539
- SUSE Bug 1273338
Описание
In the Linux kernel, the following vulnerability has been resolved: drm/edid: fix OOB read in drm_parse_tiled_block() drm_parse_tiled_block() casts the DisplayID block to a struct displayid_tiled_block and reads the full fixed layout up to tile->topology_id[7] without checking block->num_bytes. The DisplayID iterator only validates the declared payload length, so a crafted EDID can advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, or DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes at the end of a DisplayID extension. The read then runs past the end of the exact-sized kmemdup()'d EDID allocation, a heap out-of-bounds read. Reject blocks shorter than the spec's 22-byte tiled payload before reading the fixed struct, as drm_parse_vesa_mso_data() already does. BUG: KASAN: slab-out-of-bounds in drm_edid_connector_update Read of size 2 at addr ffff888010077700 by task exploit/147 dump_stack_lvl (lib/dump_stack.c:94 ...) print_report (mm/kasan/report.c:378 ...) kasan_report (mm/kasan/report.c:595) drm_edid_connector_update (drivers/gpu/drm/drm_edid.c:7581) bochs_connector_helper_get_modes (drivers/gpu/drm/tiny/bochs.c:574) drm_helper_probe_single_connector_modes (drivers/gpu/drm/drm_probe_helper.c:426) status_store (drivers/gpu/drm/drm_sysfs.c:219) ... vfs_write (fs/read_write.c:595 fs/read_write.c:688) ksys_write (fs/read_write.c:740)
Затронутые продукты
Ссылки
- CVE-2026-64546
- SUSE Bug 1273334
Описание
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup() bpa10x_setup() sends the vendor command 0xfc0e and passes the response to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at skb->data + 1, without checking the length: bt_dev_info(hdev, "%s", (char *)(skb->data + 1)); hci_set_fw_info(hdev, "%s", skb->data + 1); A device that returns a one-byte response (status only) leaves skb->data + 1 past the end of the data, and the %s walk reads adjacent slab memory until it meets a NUL. The same happens when the payload is not NUL-terminated within skb->len. The out-of-bounds bytes end up in the kernel log and the firmware-info debugfs file. Print the revision string with a bounded "%.*s" limited to skb->len - 1 instead. This keeps the string readable for well-behaved devices while never reading past the received data, and does not fail setup, so a device returning a short or unterminated response keeps working.
Затронутые продукты
Ссылки
- CVE-2026-64549
- SUSE Bug 1273341
Описание
In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode When updating CR8 intercepts, get vmcs12 if and only if the vCPU is in guest mode so that a future change can have update CR8 intercepts during vCPU creation, without running afoul of get_vmcs12()'s lockdep assertion. ------------[ cut here ]------------ debug_locks && !(lock_is_held(&(&vcpu->mutex)->dep_map) || !refcount_read(&vcpu->kvm->users_count)) WARNING: arch/x86/kvm/vmx/nested.h:61 at get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline], CPU#0: syz.2.19/5879 WARNING: arch/x86/kvm/vmx/nested.h:61 at vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879, CPU#0: syz.2.19/5879 Modules linked in: CPU: 0 UID: 0 PID: 5879 Comm: syz.2.19 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline] RIP: 0010:vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879 Call Trace: <TASK> apic_update_ppr arch/x86/kvm/lapic.c:984 [inline] kvm_lapic_reset+0x1c24/0x2980 arch/x86/kvm/lapic.c:3023 kvm_vcpu_reset+0x44c/0x1bf0 arch/x86/kvm/x86.c:12986 kvm_arch_vcpu_create+0x746/0x8b0 arch/x86/kvm/x86.c:12847 kvm_vm_ioctl_create_vcpu+0x428/0x930 virt/kvm/kvm_main.c:4201 kvm_vm_ioctl+0x893/0xd50 virt/kvm/kvm_main.c:5159 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> No functional change intended.
Затронутые продукты
Ссылки
- CVE-2026-64604
- SUSE Bug 1274286
Описание
In the Linux kernel, the following vulnerability has been resolved: smb/client: handle overlapping allocated ranges in fallocate smb3_simple_fallocate_range() can skip holes when an allocated range returned by the server starts before the current fallocate offset. The skipped hole is not zero-filled, but fallocate still returns success. A later write to that hole may therefore fail with ENOSPC. The function queries allocated ranges so that it can preserve existing contents and write zeroes only into holes. However, the server may return a range that starts before the current fallocate offset. For example, assume the fallocate request is [100, 400) and the only allocated range returned by the server is [0, 200): Request: [100, 400) Server range: [ 0, 200) allocated Correct: [100, 200) allocated data, skip [200, 400) hole, zero-fill Current: [100, 300) skipped [300, 400) zero-filled afterwards The current code adds the full server range length, 200, to the current offset 100 and moves to 300. As a result, the hole in [200, 300) is skipped without being zero-filled. Fix this by advancing only over the part of the allocated range that overlaps the current fallocate offset. Ignore ranges that end before the current offset and reject ranges whose end offset overflows. This also prevents a malformed range length from causing an out-of-bounds zero-buffer read.
Затронутые продукты
Ссылки
- CVE-2026-68388
- SUSE Bug 1274902
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: xen: scsiback: Free unsubmitted command instead of double-putting it scsiback_get_pend_req() obtains a command tag and returns a vscsibk_pend whose embedded se_cmd has only been memset to 0, so its cmd_kref is 0; the se_cmd is initialised (kref_init() via target_init_cmd()) only later, in scsiback_cmd_exec(), on the successful VSCSIIF_ACT_SCSI_CDB path. The two error paths in scsiback_do_cmd_fn() taken before the command is submitted -- a failed scsiback_gnttab_data_map() and an unknown ring_req.act -- call transport_generic_free_cmd(&pending_req->se_cmd, 0), which kref_put()s a refcount of 0. That underflows it ("refcount_t: underflow; use-after-free") and, as the release function is not run, leaks the command tag. Impact: a pvSCSI guest can leak every command tag of a LUN's session, stopping the LUN, by submitting requests with a bad grant reference or an unknown request type; under panic_on_warn the refcount underflow panics the host. Add a helper that just returns the tag with target_free_tag() and sends the error response. It frees the tag while the v2p reference still pins the session, and snapshots the response fields beforehand because freeing the tag can let another ring reuse the pending_req slot.
Затронутые продукты
Ссылки
- CVE-2026-72085
- SUSE Bug 1275542
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: xen: scsiback: Free the command tag on the TMR submit-failure path scsiback_device_action() obtains a command tag in scsiback_get_pend_req() and submits a task-management request with target_submit_tmr(). When target_submit_tmr() fails it returns < 0 and scsiback jumps to the err: label, which sends a response but frees nothing, leaking the tag. Impact: a pvSCSI guest can leak the command tags of a LUN's session, stopping the LUN, by issuing VSCSIIF_ACT_SCSI_ABORT or RESET requests whenever target_submit_tmr() fails. transport_generic_free_cmd() cannot be used here. By the time target_submit_tmr() returns an error it has already run __target_init_cmd() (so se_cmd->cmd_kref is one, not zero), and on its target_get_sess_cmd() error path it has freed se_cmd->se_tmr_req via core_tmr_release_req() while leaving SCF_SCSI_TMR_CDB set and the pointer dangling. Letting the command release run target_free_cmd_mem() would then double-free se_tmr_req. Use the same helper, which returns just the tag, on this path too.
Затронутые продукты
Ссылки
- CVE-2026-72086
- SUSE Bug 1277179
Описание
In the Linux kernel, the following vulnerability has been resolved: dm-log: fix a bitset_size overflow on 32bit machines Commit c20e36b7631d ("dm log: fix out-of-bounds write due to region_count overflow") made sure that region_count could fit in an unsigned int. But the bitmap memory isn't allocated based on region_count. It uses bitset_size (a size_t variable). The first step of calculating bitset_size is to set it to region_count, rounded up to a multiple of BITS_PER_LONG. If region_size is less than BITS_PER_LONG smaller than UINT_MAX, it will get rounded up to 2^32. On a 32bit architecture, this will make bitset_size wrap around to 0 and fail, despite region_count being valid. Since bitset_size gets divided by 8, it can hold any valid region_count. It just needs a special case to handle the rollover. If it is 0, the value rolled over, and bitset size should be set to the number of bytes needed to hold 2^32 bits.
Затронутые продукты
Ссылки
- CVE-2026-72105
- SUSE Bug 1277317
Описание
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag nf_ct_frag6_reasm() slides the packet head forward to drop the IPv6 fragment header and then unconditionally advances skb->mac_header: skb->mac_header += sizeof(struct frag_hdr); On the NF_INET_LOCAL_OUT defrag path the skb has no link-layer header yet, so skb->mac_header is still the "not set" sentinel (u16)~0U. Adding sizeof(struct frag_hdr) wraps it to a small value (0xffff + 8 == 7), after which skb_mac_header_was_set() wrongly reports a MAC header is present and skb_mac_header() points into the headroom. The reassembler has done this unconditional add since it was introduced; it was harmless while mac_header was a bare pointer, but wrong once mac_header became a u16 offset whose unset state is the ~0U sentinel tested by skb_mac_header_was_set(). The sibling net/ipv6/reassembly.c does the same relocation and does guard the adjustment; mirror the guard here.
Затронутые продукты
Ссылки
- CVE-2026-72250
- SUSE Bug 1277663
Описание
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix overflow in passthrough ioctl bounds check smb2_ioctl_query_info() validates the PASSTHRU_FSCTL response payload before copying it to userspace. The payload offset and length both come from 32-bit fields. The bounds check currently adds OutputOffset and qi.input_buffer_length directly, so the addition can wrap in 32-bit arithmetic before the result is compared against the response buffer length. A malicious server can use a large OutputOffset and a small OutputCount to make the wrapped sum pass the bounds check. The later copy_to_user() then reads from io_rsp + OutputOffset, outside the response buffer. Use size_add() for the offset plus length check so overflow is treated as out of bounds.
Затронутые продукты
Ссылки
- CVE-2026-72310
- SUSE Bug 1277750
Описание
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_compat: ebtables emulation must reject non-bridge targets xtables targets return netfilter verdicts: NF_ACCEPT, NF_DROP, and so on. ebtables targets return incompatible verdicts: EBT_ACCEPT, EBT_DROP, ... We cannot allow fallback to NFPROTO_UNSPEC. ebtables doesn't permit this since 11ff7288beb2 ("netfilter: ebtables: reject non-bridge targets") but that commit missed the nft_compat layer.
Затронутые продукты
Ссылки
- CVE-2026-72416
- SUSE Bug 1278041
- SUSE Bug 1278042
Описание
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack slot index in nospec checks check_stack_write_fixed_off() computes the byte slot for a fixed-offset stack write as -off - 1, and records each written byte in slot_type[] with (slot - i) % BPF_REG_SIZE. The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a 4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates bytes 7..4. That can leave the second half-slot write without nospec_result even though the bytes being overwritten still require sanitization. Use the same slot index in the sanitization pre-check that the write path uses when updating slot_type[].
Затронутые продукты
Ссылки
- CVE-2026-72428
- SUSE Bug 1278050
Описание
In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix kernel heap address leak in bounce_error_event() The comment above bounce_error_event() documents that user clients should receive SNDRV_SEQ_EVENT_BOUNCE with the original event embedded as variable-length data, while kernel clients should receive SNDRV_SEQ_EVENT_KERNEL_ERROR with a quoted kernel pointer. However, the implementation unconditionally uses SNDRV_SEQ_EVENT_KERNEL_ERROR with data.quote.event set to the raw struct snd_seq_event pointer for all clients. When a bounce error event is delivered to a USER_CLIENT via snd_seq_read(), the kernel heap address in data.quote.event is exposed to userspace through copy_to_user() in the fixed-length branch. This is a distinct leak path from the one addressed by commit 705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read"), which sanitizes data.ext.ptr in the variable-length branch of snd_seq_read(). The bounce_error_event() leak uses fixed-length events that take the else branch where no sanitization occurs. Differentiate the bounce event by client type. For USER_CLIENT, send SNDRV_SEQ_EVENT_BOUNCE with SNDRV_SEQ_EVENT_LENGTH_VARIABLE and data.ext pointing to the original event. The variable-length path in snd_seq_event_dup() copies the event data into chained cells, and snd_seq_expand_var_event() copies only the content -- never the pointer -- to userspace. For KERNEL_CLIENT, keep the existing SNDRV_SEQ_EVENT_KERNEL_ERROR behavior with the quoted pointer.
Затронутые продукты
Ссылки
- CVE-2026-74278
- SUSE Bug 1278132
Описание
In the Linux kernel, the following vulnerability has been resolved: sctp: validate embedded address parameter length sctp_verify_asconf() and sctp_verify_param() only validate ADD_IP, DEL_IP, and SET_PRIMARY parameters against a fixed minimum size of sizeof(struct sctp_addip_param) + sizeof(struct sctp_paramhdr). This ensures the outer parameter is large enough to contain an embedded address parameter header, but does not verify that the embedded address parameter's declared length fits within the bounds of the outer parameter. Later, sctp_process_param() and sctp_process_asconf_param() extract the embedded address parameter and pass it to af->from_addr_param(), which uses the address parameter length to parse the variable-length address payload. A malformed peer can therefore advertise an embedded address parameter length that exceeds the remaining bytes in the enclosing parameter. Validate that addr_param->p.length does not exceed the space available after the sctp_addip_param header before processing the embedded address parameter. Reject malformed parameters when the embedded address length extends beyond the enclosing parameter bounds. This prevents out-of-bounds reads when parsing malformed parameters carried in INIT or ASCONF processing paths.
Затронутые продукты
Ссылки
- CVE-2026-74287
- SUSE Bug 1277264
- SUSE Bug 1277416
Описание
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_gact, act_police: range check the fallback control action tcf_action_check_ctrlact() range checks the primary control action: if (!opcode) ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0; TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it cannot be set that way. But act_gact and act_police each carry a second, independent control action supplied by user space that never reaches that helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned verbatim from the action. In particular user space can store TC_ACT_CONSUMED, which is TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value range. That verdict tells every caller the action took ownership of the skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for it. The result is one leaked sk_buff plus its data buffer per packet traversing the filter, unbounded, for all traffic on the chain including kernel-generated packets. Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so with pval = 1 gact_determ() returns the fallback for every packet. act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and tcf_police_mtu_check() always passes. TC_ACT_CONSUMED was added by commit 720f22fed81b ("net: sched: refactor reinsert action"), after both goto-chain guards were written: commit 9469f375ab09 ("net/sched: act_gact: disallow 'goto chain' on fallback control action") and commit c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on fallback control action"). Neither guard was widened when the new verdict appeared. Factor the existing range test out of tcf_action_check_ctrlact() as tcf_action_valid() and apply it to both fallbacks. The helper cannot call tcf_action_check_ctrlact() directly because that also allocates a goto_chain, which is exactly what these two sites must not do. Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte skbuff_head_cache object plus its 704-byte data buffer per packet. With this patch both configurations are rejected with -EINVAL and kmemleak reports none.
Затронутые продукты
Ссылки
- CVE-2026-74620
- SUSE Bug 1277044
Описание
In the Linux kernel, the following vulnerability has been resolved: Input: evdev - sanitize event type index when fetching event masks The user-supplied event type index passed to EVIOCGMASK / EVIOCSMASK ioctls is used to index the static counts array in evdev_get_mask_cnt() and client evmasks array in evdev_get_mask(). While the event type is architecturally bounded by EV_CNT, speculative execution may mispredict bounds checks and perform out-of-bounds loads. Sanitize the event type index in evdev_get_mask_cnt() branchlessly using array_index_mask_nospec(). This clamps the index to 0 for safe array access and forces the returned count to 0 speculatively when the index is out of bounds. We do not need additional array_index_nospec() calls in evdev_get_mask() because evdev_get_mask_cnt() speculatively forces the count (and resulting xfer_size) to 0 for out-of-bounds types, preventing any speculative memory access to client evmasks array.
Затронутые продукты
Ссылки
- CVE-2026-74683
- SUSE Bug 1277387
Описание
In the Linux kernel, the following vulnerability has been resolved: net: tap: set skb->dev before parsing virtio net header in tap_get_user_xdp() The commit 4f61f133f354 ("net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null") fixed a crash in tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb(). This is required because virtio_net_hdr_to_skb() may invoke dev_parse_header_protocol(), which dereferences skb->dev. Without the assignment, a NULL pointer dereference can occur. However, tap_get_user_xdp() still parses the virtio-net header before assigning skb->dev. When the vhost TX path passes an XDP buffer containing a GSO virtio-net header but the protocol is set to zero on purpose, tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev is still NULL, resulting in a crash. Fix this by looking up the tap device and assigning skb->dev before calling tun_vnet_hdr_to_skb(), matching the ordering already used in tap_get_user(). Preserve the existing RCU read-side critical section across dev_queue_xmit().
Затронутые продукты
Ссылки
- CVE-2026-74684
- SUSE Bug 1274550
Описание
In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve pointer state for commuted arithmetic When scalar += pointer is handled in adjust_ptr_min_max_vals(), the destination register inherits the pointer state from the source pointer. Copying only selected fields is fragile because pointer provenance is tracked by several bpf_reg_state fields. Use the caller's temporary offset register to preserve the scalar operand while replacing the destination with the full pointer state. This preserves the frame number for PTR_TO_STACK registers and keeps parent identity fields consistent.
Затронутые продукты
Ссылки
- CVE-2026-74720
- SUSE Bug 1276574
Описание
In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix refcount race between list:set GC and swap __ip_set_put_byindex() resolved the index to a set pointer under RCU, then took ip_set_ref_lock in __ip_set_put() to decrement set->ref. ip_set_swap() holds that same lock while swapping both the ip_set_list slots and the two sets' ref counters, so it can interleave between the dereference and the lock acquisition, leaving the caller to decrement a set whose reference already moved to the other index and hit BUG_ON(set->ref == 0). list_set_gc() reaches this from timer softirq, which the nfnl mutex does not serialize against swap: an expiring list:set member calls list_set_del() -> ip_set_put_byindex() while IPSET_CMD_SWAP runs on the referenced sets. Resolve the index and decrement under ip_set_ref_lock, as ip_set_swap() already does, keeping the refcount tied to the index rather than to a stale set pointer. kernel BUG at net/netfilter/ipset/ip_set_core.c:685! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ip_set_put_byindex (net/netfilter/ipset/ip_set_core.c:870) Call Trace: <IRQ> list_set_del (net/netfilter/ipset/ip_set_list_set.c:159) set_cleanup_entries (net/netfilter/ipset/ip_set_list_set.c:181) list_set_gc (net/netfilter/ipset/ip_set_list_set.c:578) call_timer_fn (kernel/time/timer.c:1748) __run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2374) run_timer_softirq (kernel/time/timer.c:2405) </IRQ> Kernel panic - not syncing: Fatal exception in interrupt
Затронутые продукты
Ссылки
- CVE-2026-74748
- SUSE Bug 1277578
Описание
In the Linux kernel, the following vulnerability has been resolved: Input: byd - synchronize timer deletion before freeing private data byd_disconnect() uses timer_delete() before freeing the driver's private data. This does not wait for a running byd_clear_touch() callback, which dereferences the private data and its psmouse pointer. A callback racing with disconnect can therefore access the private data after it has been freed. The timer can also still be re-armed by byd_process_byte() while the disconnect is in progress. Use timer_shutdown_sync() before freeing the private data: it waits for a running callback and turns any later re-arm attempt into a no-op.
Затронутые продукты
Ссылки
- CVE-2026-80572
- SUSE Bug 1277338
Описание
In the Linux kernel, the following vulnerability has been resolved: fbdev: clear fb_info->mode before deleting a videomode fb_set_var() can delete a mode from info->modelist when userspace passes FB_ACTIVATE_INV_MODE through FBIOPUT_VSCREENINFO. The code checks that the mode being deleted is not the current info->var and that fbcon is not using it, but it does not check fb_info->mode. fb_info->mode may still point into the modelist entry being deleted. If the entry is freed, later mode sysfs reads through show_mode() can dereference a stale pointer. Clear fb_info->mode before calling fb_delete_videomode() when it matches the mode being removed.
Затронутые продукты
Ссылки
- CVE-2026-80579
- SUSE Bug 1277260
Описание
In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: fix unaligned memory access in timestamp adjustment Use get_unaligned_be32() and put_unaligned_be32() to safely read and write the timestamp fields. This prevents performance degradation due to unaligned memory access or even a crash on strict alignment architectures. This follows the implementation of timestamp parsing in the networking stack at tcp_parse_options() and synproxy_parse_options().
Затронутые продукты
Ссылки
- CVE-2026-80637
- SUSE Bug 1278343
Описание
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: use proper context for logging The same as the rest of the code, get_ss_info_from_atombios() uses calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is initialized only later in calc_pll_max_vco_construct(). Therefore, any output using DC_LOG_SYNC() leads to a NULL pointer deference in get_ss_info_from_atombios(). According to Sashiko, the very same problem exists in dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too. To avoid accessing the NULL context, use clk_src->base.ctx->logger everywhere. That context in base is initialized earlier in dce110_clk_src_construct() and dce112_clk_src_construct(). Before get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions above are actually called. This is done by redefining DC_LOGGER to CTX->logger. Before: dce110_clk_src_construct() did: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM -> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx After: dce110_clk_src_construct() does: -> sets clk_src->base.ctx = ctx; -> ss_info_from_atombios_create() -> get_ss_info_from_atombios() <- uses clk_src->base.ctx (cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0)
Затронутые продукты
Ссылки
- CVE-2026-80704
- SUSE Bug 1278431
Описание
In the Linux kernel, the following vulnerability has been resolved: sctp: validate Adaptation Indication parameter length The Adaptation Layer Indication parameter contains a fixed 32-bit Adaptation Code Point after its parameter header. However, sctp_verify_param() accepts a header-only parameter because the generic parameter walker only requires the header to be present. sctp_process_param() then reads adaptation_ind beyond the declared parameter. When the malformed parameter is last in an INIT, the read starts at the receive skb tail, and the value is copied into the state cookie returned in the INIT ACK. This may disclose four receive-buffer tail bytes. Require the declared parameter length to match the fixed structure size and abort the association through the existing invalid parameter length path otherwise.
Затронутые продукты
Ссылки
- CVE-2026-80717
- SUSE Bug 1277836
Описание
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: fix LE list UAF on reset hci_cc_reset() clears the LE accept and resolving lists without taking hdev->lock. Other command-complete handlers serialize updates to these lists with that lock, and the debugfs readers hold it while walking them. This permits the reset completion and a debugfs read to interleave as follows: hci_rx_work debugfs reader ----------- -------------- lock hdev->lock fetch current entry list_del(entry) kfree(entry) read entry fields The reader then dereferences a freed list entry and may follow its stale next pointer. KASAN reported: BUG: KASAN: slab-use-after-free in white_list_show+0x15f/0x180 Read of size 1 at addr ffff8881015dab16 by task poc/95 Call Trace: white_list_show+0x15f/0x180 seq_read_iter+0x3ff/0x1190 seq_read+0x267/0x3d0 vfs_read+0x177/0xa20 ksys_read+0xf7/0x1c0 Allocated by task 91: hci_bdaddr_list_add+0x1a6/0x3a0 hci_cc_le_add_to_accept_list+0xab/0x140 hci_cmd_complete_evt+0x26c/0x9a0 hci_event_packet+0x454/0xb20 hci_rx_work+0x293/0x730 Freed by task 90: kfree+0x131/0x3c0 hci_bdaddr_list_clear+0xd8/0x160 hci_cc_reset+0x28a/0x370 hci_cmd_complete_evt+0x26c/0x9a0 hci_event_packet+0x454/0xb20 hci_rx_work+0x293/0x730 Take hdev->lock around both list clears. This matches the existing mutation and traversal locking convention.
Затронутые продукты
Ссылки
- CVE-2026-80764
- SUSE Bug 1279493
Описание
In the Linux kernel, the following vulnerability has been resolved: ext4: stop retrying saturated xattr cache entries ext4_xattr_block_set() retries when a cache entry selected for reuse has a saturated reference count after taking the buffer lock. The retry returns to the mbcache lookup without making that entry ineligible, so it can select the same unusable entry indefinitely. A task spinning there can hold the parent directory's i_rwsem and leave concurrent rmdir callers blocked. Normally a reusable entry has a reference count below EXT4_XATTR_REFCOUNT_MAX because the count and MBE_REUSABLE_B are updated under the same buffer lock. A corrupted filesystem can violate that invariant. The syzbot reproducer reports allocator and xattr corruption before triggering this retry loop. Check the untrusted on-disk count before incrementing it, avoiding overflow, and clear MBE_REUSABLE_B when it is already saturated. The next lookup then skips the entry that was just proven unusable. This mirrors the normal transition at EXT4_XATTR_REFCOUNT_MAX; the release path marks the entry reusable again on the exact 1024-to-1023 transition. Using the same QEMU harness and guest parameters, current unpatched Linux hung in 6 of 8 420-second trials with the do_rmdir signature; representative NMI backtraces caught the owner spinning in ext4_xattr_block_set(). The patched kernel completed 28 of 28 trials without a hung-task report; the final twelve trials exercised the reviewed overflow-safe form of the change. syzbot's patch testing also completed without reproducing the hang.
Затронутые продукты
Ссылки
- CVE-2026-80808
- SUSE Bug 1279795
Описание
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix missing metadata reservation for large xattrs [BUG] lsetxattr() panics the kernel when setting a large xattr value on a fragmented filesystem where the file already has an external xattr block. [CAUSE] ocfs2_calc_xattr_set_need() never reserves metadata blocks for a new xattr value's extent tree when the file already has an external xattr block. The not_found path leaves meta_add at zero, so meta_ac is NULL when ocfs2_xattr_extend_allocation() runs. A new value root has room for a single extent record. On a fragmented filesystem, the allocator cannot satisfy the xattr value in one contiguous run, so each non-contiguous run requires its own extent record. When the value root's extent list is full and meta_ac is NULL, ocfs2_add_clusters_in_btree() returns RESTART_META, and ocfs2_xattr_extend_allocation() hits BUG_ON(why == RESTART_META). [FIX] The case where no xattr block exists yet already calls ocfs2_extend_meta_needed(&def_xv.xv.xr_list) to reserve value tree metadata. Add the same reservation to the case where an xattr block already exists, making the two cases consistent. Replace the BUG_ON with a -ENOSPC return so that if RESTART_META is returned despite the reservation, the error propagates to userspace instead of panicking the kernel.
Затронутые продукты
Ссылки
- CVE-2026-80809
- SUSE Bug 1279606
Описание
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write A circular locking dependency involves INODE_ALLOC_SYSTEM_INODE, EXTENT_ALLOC_SYSTEM_INODE, and ORPHAN_DIR_SYSTEM_INODE. 1. ocfs2_mknod() acquires INODE_ALLOC then EXTENT_ALLOC. 2. ocfs2_dio_end_io_write() acquires EXTENT_ALLOC for unwritten extents, then ORPHAN_DIR via ocfs2_del_inode_from_orphan() while still holding EXTENT_ALLOC. 3. ocfs2_wipe_inode() acquires ORPHAN_DIR then INODE_ALLOC via ocfs2_remove_inode. Break the cycle in ocfs2_dio_end_io_write() by freeing the allocation contexts (releasing EXTENT_ALLOC) before acquiring ORPHAN_DIR. WARNING: possible circular locking dependency detected ------------------------------------------------------ is trying to acquire lock: ffff8881e78b33a0 (&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE]){+.+.}-{4:4}, at: ocfs2_evict_inode+0x1539/0x43b0 fs/ocfs2/inode.c:1299 but task is already holding lock: ffff8881e78b4fa0 (&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]){+.+.}-{4:4}, at: ocfs2_evict_inode+0xe97/0x43b0 fs/ocfs2/inode.c:1299 the existing dependency chain (in reverse order) is: -> #2 (&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]){+.+.}-{4:4}: inode_lock include/linux/fs.h:1029 [inline] ocfs2_del_inode_from_orphan+0x12e/0x7a0 fs/ocfs2/namei.c:2728 ocfs2_dio_end_io+0xf9c/0x1370 fs/ocfs2/aops.c:2418 dio_complete+0x25b/0x790 fs/direct-io.c:281 -> #1 (&ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE]){+.+.}-{4:4}: inode_lock include/linux/fs.h:1029 [inline] ocfs2_reserve_suballoc_bits+0x16d/0x4840 fs/ocfs2/suballoc.c:882 ocfs2_reserve_new_metadata_blocks+0x415/0x9a0 fs/ocfs2/suballoc.c:1078 ocfs2_mknod+0x10f3/0x2260 fs/ocfs2/namei.c:351 -> #0 (&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE]){+.+.}-{4:4}: __lock_acquire+0x15a5/0x2cf0 kernel/locking/lockdep.c:5237 lock_acquire+0x106/0x350 kernel/locking/lockdep.c:5868 down_write+0x96/0x200 kernel/locking/rwsem.c:1625 inode_lock include/linux/fs.h:1029 [inline] ocfs2_remove_inode fs/ocfs2/inode.c:733 [inline] ocfs2_wipe_inode fs/ocfs2/inode.c:896 [inline] ocfs2_delete_inode fs/ocfs2/inode.c:1157 [inline] ocfs2_evict_inode+0x1539/0x43b0 fs/ocfs2/inode.c:1299 Chain exists of: &ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE] --> &ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE] --> &ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]); lock(&ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE]); lock(&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]); lock(&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE]); *** DEADLOCK ***
Затронутые продукты
Ссылки
- CVE-2026-80879
- SUSE Bug 1279494
Описание
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix buffer head management in ocfs2_read_blocks() In ocfs2_read_blocks(), caller should't assume that buffer head returned by 'sb_getblk()' is exclusively owned and so 'put_bh()' always drops b_count from 1 to 0. If it is not so, buffer head remains on hold and likely to be returned by the next call to 'sb_getblk()' unchanged - that is, with BH_Uptodate bit set even if it has failed validation previously, thus allowing to insert that buffer head into OCFS2 metadata cache and submit it to upper layers. To avoid such a scenario, BH_Uptodate should be cleared immediately after 'validate()' callback has detected some data inconsistency.
Затронутые продукты
Ссылки
- CVE-2026-80881
- SUSE Bug 1279496
Описание
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: drop dma_buf reference on foreign-fd prime import ttm_prime_fd_to_handle() returns -ENOSYS when the imported fd's dma_buf->ops do not match the ttm_object_device's ops, but does so without releasing the reference acquired by dma_buf_get(). Any unprivileged renderD client passing a non-vmwgfx prime fd through the DRM_VMW_GB_SURFACE_REF{,_EXT} path leaks one dma_buf reference per call and indefinitely pins the foreign exporter's GEM resources. Funnel the error path through the existing dma_buf_put() so the reference is always dropped.
Затронутые продукты
Ссылки
- CVE-2026-80888
- SUSE Bug 1279455
Описание
In the Linux kernel, the following vulnerability has been resolved: net: cap advertised IP tunnel headroom IP tunnel devices derive their advertised needed_headroom from lower output devices. A stack of user-created devices can make the derived value larger than the 16-bit skb header offsets can represent. Once IP output reserves it, skb head expansion can wrap those offsets. The runtime transmit path already caps a growing needed_headroom at 512. Apply the same cap when tunnel configuration publishes needed_headroom derived from a lower output device. Capping the advertised value is safe: IP tunnel transmit still expands the skb when a packet needs more headroom. A nonsensical stacked configuration can therefore incur an extra reallocation, but it cannot publish an unbounded reservation to upper layers.
Затронутые продукты
Ссылки
- CVE-2026-80978
- SUSE Bug 1280253
Описание
In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Mark the connection down when bringing it up fails Every failure path in tbnet_connected_work() undoes its own work and returns without clearing login_sent, so the connection still looks established. The next tbnet_tear_down() therefore takes its main branch and repeats a teardown that already happened: it stops rings that are already stopped, which is a dev_WARN() and fatal under panic_on_warn, and it releases net->remote_transmit_path even on the HopID mismatch path, where this connection never owned that id, silently freeing one that someone else is still using. Clear login_sent on those paths. That is enough for tbnet_tear_down() to leave the unwound state alone, and login_received has to stay set: it records that the peer has logged in and carries the transmit path it gave us, which nothing on this side can make the peer send again. Two things change beyond keeping the teardown out of the way: the logout request in that block is no longer sent, and the peer's next login request now re-queues our login work rather than connected_work, giving the connection a fresh login instead of a retry on stale state.
Затронутые продукты
Ссылки
- CVE-2026-80989
- SUSE Bug 1280305
Описание
In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate lengths in dlm_mig_lockres_handler A node receiving a DLM_MIG_LOCKRES message trusts several fields of the peer-supplied dlm_migratable_lockres without validation. num_locks and lockname_len are bounded only on the sending side, and the message is never checked to actually carry num_locks migratable_lock entries. As a result dlm_process_recovery_data() walks mres->ml[0..num_locks) past the kmalloc(data_len) copy of the message (an out-of-bounds read that ends in a BUG_ON panic), and dlm_init_lockres() copies lockname_len bytes into the fixed 32-byte o2dlm_lockname slab object (a heap out-of-bounds write). Both are reachable by any node in the domain. Validate these fields right after dlm_grab(), before anything uses them -- including the not-joined error path, which already prints mres->lockname with the unbounded lockname_len as a %.*s precision. Reject the message unless lockname_len <= DLM_LOCKID_NAME_MAX, num_locks <= DLM_MAX_MIGRATABLE_LOCKS (the bound the sender already asserts), and the payload is large enough to hold the claimed locks. Conforming recovery and migration messages are unaffected.
Затронутые продукты
Ссылки
- CVE-2026-89494
- SUSE Bug 1280520
Описание
In the Linux kernel, the following vulnerability has been resolved: ocfs2: bound namelen in dlm_migrate_request_handler Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm". The o2dlm receive handlers trust u8 length and count fields from the wire without bounding them, so a node in a DLM domain can corrupt or panic any other node with a malformed message. Three defects: - dlm_migrate_request_handler() passes migrate->namelen unchecked to dlm_init_mle(), which memcpy()s it into the 32-byte mname[] of an o2dlm_mle slab object: a heap out-of-bounds write of up to ~215 attacker-controlled bytes. - dlm_mig_lockres_handler() passes mres->lockname_len unchecked to dlm_init_lockres(), which memcpy()s it into the 32-byte o2dlm_lockname slab object: a heap out-of-bounds write of up to ~223 bytes. - the same handler trusts mres->num_locks without checking that the message is large enough to hold that many entries, so dlm_process_recovery_data() walks mres->ml[] past the kmalloc(data_len) copy and trips a BUG_ON (an out-of-bounds read ending in a panic). The other o2dlm receive handlers already reject an oversized name; the migration and recovery handlers have omitted it since the DLM was added (see the Fixes tags). Patch 1 bounds namelen; patch 2 validates lockname_len, num_locks, and the payload size. Conforming recovery and migration traffic is unaffected. o2net authenticates peers only by the DLM domain key, so any node that has joined the domain -- including a compromised or malicious member -- can send these messages. There is no local trigger; the attacker must already be a member of the cluster. Each sink was confirmed under KASAN with an out-of-tree module mirroring it exactly -- a kmem_cache/kmalloc of the real destination size, then the same unclamped memcpy/loop: slab-out-of-bounds Write for the two writes, Read for the recovery walk, and a panic. A userspace AddressSanitizer build faults identically under -m32 and -m64. Scrubbed logs are available on request. I reported this privately to security@kernel.org and the ocfs2 maintainers on 2026-06-20; with no response after the standard embargo period I am posting the fix publicly. I have no embargo requirement. This patch (of 2): A node receiving a DLM_MIGRATE_REQUEST message trusts the peer-supplied name length (migrate->namelen) without bounding it. dlm_init_mle() then copies that many bytes into the fixed DLM_LOCKID_NAME_MAX-byte mname[] array of an o2dlm_mle slab object, so a malformed message from a cluster peer overflows the slab object by up to ~215 bytes: a heap out-of-bounds write of attacker-controlled data, reachable by any node in the domain. Reject an oversized name, the way dlm_master_request_handler() and the other o2dlm receive handlers already do; the migration handler omits the check entirely. Conforming messages are unaffected.
Затронутые продукты
Ссылки
- CVE-2026-89495
- SUSE Bug 1280569
Описание
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Reject short RFC 4121 MIC tokens in gss_krb5_verify_mic_v2 gss_krb5_verify_mic_v2() reads the token ID at ptr[0..1], the flags byte at ptr[2], and padding at ptr[3..7], then passes ptr + GSS_KRB5_TOK_HDR_LEN and cksum_len to gss_krb5_mic_build_sg(). None of these accesses check read_token->len first. The minimum safe token size is GSS_KRB5_TOK_HDR_LEN (16) plus ctx->krb5e->cksum_len (12-24, depending on the enctype). All callers accept shorter tokens from the wire: - gss_unwrap_resp_integ() enforces only an upper bound (offset + len <= rcv_buf->len) before allocating mic.data = kmalloc(len) and passing it to gss_verify_mic(). A malicious NFS server can therefore supply a short checksum opaque, producing a small slab allocation that the Kerberos MIC verifier reads past. - gss_validate() enforces only len <= RPC_MAX_AUTH_SIZE (400) before passing the wire-supplied length to gss_validate_seqno_mic(), which constructs a mic xdr_netobj and calls gss_verify_mic(). - svcauth_gss_verify_header() enforces only checksum.len >= XDR_UNIT (4 bytes) before dispatching to gss_verify_mic(). - svcauth_gss_unwrap_integ() checks only that the checksum fits in gsd->gsd_scratch. Add a length guard at the top of gss_krb5_verify_mic_v2(), before any ptr[] access or scatterlist construction. Well-formed MIC tokens from gss_krb5_get_mic_v2() already have exactly GSS_KRB5_TOK_HDR_LEN + cksum_len bytes, so valid traffic is unaffected.
Затронутые продукты
Ссылки
- CVE-2026-89537
- SUSE Bug 1280713
Описание
In the Linux kernel, the following vulnerability has been resolved: libnvdimm/labels: Prevent integer overflow in __nd_label_validate() The on-media namespace index field nslot is a u32 read from the DIMM label storage area. __nd_label_validate() bounds it against the config area size, but sizeof_namespace_label() returns unsigned, so the product nslot * label_size is evaluated in 32-bit and wraps modulo 2^32 before the comparison. A crafted nslot passes the bound and is then used as the loop trip count in nd_label_data_init(), whose memset() walks off the end of the config_size buffer: an out-of-bounds write. The field is not trusted -- it comes from the medium, or from userspace via ND_CMD_SET_CONFIG_DATA. Evaluate the product in 64-bit so the bound check is exact; conforming labels are unaffected. The check was safe when introduced by commit 4a826c83db4e ("libnvdimm: namespace indices: read and validate"): it multiplied by sizeof(struct nd_namespace_label), a size_t, so on a 64-bit build the product did not wrap. Commit 564e871aa66f ("libnvdimm, label: add v1.2 nvdimm label definitions") narrowed it to 32 bits when the label size became a runtime value read via sizeof_namespace_label().
Затронутые продукты
Ссылки
- CVE-2026-89559
- SUSE Bug 1280554
Описание
In the Linux kernel, the following vulnerability has been resolved: ecryptfs: reject too-small tag 70 packets ecryptfs_parse_tag_70_packet() subtracts fixed metadata fields from the parsed packet body size to derive the encrypted filename size. A malformed packet with a body smaller than those fixed fields can underflow that size calculation. Reject tag 70 packets before the subtraction unless the body contains the signature, cipher code, and at least one byte of encrypted filename data.
Затронутые продукты
Ссылки
- CVE-2026-89606
- SUSE Bug 1280469
- SUSE Bug 1280470
Описание
In the Linux kernel, the following vulnerability has been resolved: ecryptfs: reject oversized encrypted_key_size in parse_tag_3_packet parse_tag_3_packet() set encrypted_key_size from the Tag 3 packet body without bounding it against ECRYPTFS_MAX_KEY_BYTES (64). When encrypted_key_size > 64, decrypt_passphrase_encrypted_session_key() sets decrypted_key_size = encrypted_key_size and performs two out-of-bounds writes: 1. crypto_skcipher_decrypt() writes encrypted_key_size bytes into decrypted_key[64] via scatterlist, overflowing into the parent ecryptfs_auth_tok struct. 2. memcpy(crypt_stat->key, decrypted_key, decrypted_key_size) writes into crypt_stat->key[64], corrupting root_iv, keysig_list, and mutexes in ecryptfs_crypt_stat. Only AES-192 (cipher code 0x08) enables this because it sets crypt_stat->key_size = 24 independently of encrypted_key_size, allowing crypto_skcipher_setkey() to succeed while encrypted_key_size exceeds ECRYPTFS_MAX_KEY_BYTES. The PKI decryption path (parse_tag_65_packet) already validates decrypted_key_size <= ECRYPTFS_MAX_KEY_BYTES; the passphrase path omits this check. Bound encrypted_key_size against ECRYPTFS_MAX_KEY_BYTES (64) rather than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES (512). The 64-byte limit also protects the 512-byte encrypted_key[] buffer, so the former 512-byte check is removed as redundant. [tyhicks: Adjust the code comment to refer to macros representing the buffer sizes rather than mentioning the buffer size values since they may change in the future]
Затронутые продукты
Ссылки
- CVE-2026-89607
- SUSE Bug 1281792
- SUSE Bug 1281794
Описание
In the Linux kernel, the following vulnerability has been resolved: ecryptfs: pass packet set buffer size to parser ecryptfs_parse_packet_set() receives a pointer into the file header, but it calculates the remaining packet buffer size from PAGE_SIZE - 8. For version 1 headers the packet set starts later in the header, so this can overstate the available buffer. Pass the actual packet set buffer length from the caller and calculate per-packet limits from the remaining bytes in that buffer. Recompute the remaining length after consuming a tag 3 packet before parsing the following tag 11 packet.
Затронутые продукты
Ссылки
- CVE-2026-89608
- SUSE Bug 1280826
Описание
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject a tree connect response whose byte count is too small CIFSTCon() bounds its strnlen() over the byte area with the server's ByteCount minus two, which for ByteCount 0 or 1 goes negative as an int and converts to a huge size_t. The later subtraction wraps the __u16 bytes_left, and that is what bounds cifs_strndup_from_utf16(): a bound of up to 65535 against a ~16 KB cifs_req_poolp object runs off the end of the slab object, and the bytes reach userspace through tcon->nativeFileSystem in /proc/fs/cifs/DebugData. Reject a byte area too small for what the parser consumes. Two bytes is the least it can consume, and no conformant response carries fewer. The new trace point is the 129th smb_eio_trace entry, which __mode(byte) cannot represent, so the attribute goes with it.
Затронутые продукты
Ссылки
- CVE-2026-89631
- SUSE Bug 1280496
- SUSE Bug 1280498
Описание
In the Linux kernel, the following vulnerability has been resolved: smb: client: clear ce->tgthint in free_tgts() When free_tgts() frees all structures in ce->tlist, ce->tgthint is left pointing to one of the freed cache_dfs_tgt structures. If ce->tgthint is not reset before it is used later, it results in a use-after-free. Set ce->tgthint to NULL in free_tgts() after the elements are freed to reflect that no elements remain.
Затронутые продукты
Ссылки
- CVE-2026-89636
- SUSE Bug 1281042
- SUSE Bug 1281043
Описание
In the Linux kernel, the following vulnerability has been resolved: smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions When a file has the setuid or setgid bit set and is written to, the VFS strips those bits and issues a setattr with ATTR_KILL_SUID/ATTR_KILL_SGID together with an ATTR_MODE carrying the already-cleared mode. Both cifs_setattr_unix() and cifs_setattr_nounix() unconditionally dropped ATTR_MODE in that case: /* skip mode change if it's just for clearing setuid/setgid */ if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) attrs->ia_valid &= ~ATTR_MODE; This is fine for the default mount, where the mode is only emulated via the DOS read-only attribute and cannot represent the setuid/setgid bits anyway. However, with the "cifsacl" or "modefromsid" mount options the mode is stored on the server through an ACL (id_mode_to_cifs_acl()), with the SMB3.1.1 POSIX extensions the mode is sent to the server directly, and with the SMB1 Unix extensions (cifs_setattr_unix) the mode is sent via CIFSSMBUnixSetPathInfo(). In all those cases dropping ATTR_MODE means the cleared mode is never pushed to the server, so the setuid/setgid bit survives the write. This is a security issue: on local filesystems the setuid bit is stripped when a file is written, but over these cifs.ko mounts the bit persists on the server, potentially allowing an unexpected privilege escalation on subsequent execution. Fix this in two places: 1. cifs_setattr_nounix(): only take the "skip mode change" shortcut when the mode is emulated via the DOS read-only attribute (i.e. neither cifsacl/modefromsid nor the SMB3.1.1 POSIX extensions are in effect), so that the cleared mode is propagated to the server in the ACL / POSIX cases. 2. cifs_setattr_unix(): this function is only called when Unix extensions are in effect, so the mode is always stored on the server. Remove the shortcut entirely so that the cleared mode is always pushed.
Затронутые продукты
Ссылки
- CVE-2026-89638
- SUSE Bug 1281046
- SUSE Bug 1281047
Описание
In the Linux kernel, the following vulnerability has been resolved: cifs: fix loff_t underflow in cifs_remap_file_range() when len == 0 With len == 0 (clone to EOF), the effective length is computed as: len = src_inode->i_size - off; If off > i_size, this is a negative loff_t, corrupting the ByteCount in the FSCTL_DUPLICATE_EXTENTS_TO_FILE request and inverting the range in filemap_write_and_wait_range(). The existing off >= i_size check fires only after the ioctl has already been sent. Snapshot i_size_read() once for both the bounds check and the length calculation, eliminating the TOCTOU and 32-bit torn-read risk. Reject off > src_size with -EINVAL. Treat off == src_size as a no-op, consistent with __generic_remap_file_range_prep().
Затронутые продукты
Ссылки
- CVE-2026-89640
- SUSE Bug 1280950
Описание
In the Linux kernel, the following vulnerability has been resolved: cifs: call pagecache_isize_extended() in cifs_setsize() when extending cifs_setsize() calls truncate_pagecache() but skips pagecache_isize_extended() on extension. truncate_setsize() shows the correct pattern: i_size_write(inode, newsize); if (newsize > oldsize) pagecache_isize_extended(inode, oldsize, newsize); truncate_pagecache(inode, newsize); pagecache_isize_extended() zeroes the tail of the page straddling old EOF. Without it, dirty bytes in that region can be written back to the server, exposing stale data in the newly extended range.
Затронутые продукты
Ссылки
- CVE-2026-89642
- SUSE Bug 1280970
Описание
In the Linux kernel, the following vulnerability has been resolved: libceph: reject buckets with mismatched CRUSH ids crush_decode() stores bucket data by array slot, and the mapper later derives the per-bucket workspace index from the decoded bucket id. A malformed map can therefore make one bucket reuse another bucket's workspace by encoding an id different from -1 - slot. For uniform buckets, the second replica selection expands the source bucket's permutation into that aliased workspace buffer. If the source bucket is larger than the aliased bucket, the write runs past the smaller permutation array and can escape the kvmalloc'd CRUSH workspace. KASAN reports a slab OOB write of 4 bytes in bucket_perm_choose(). Reject buckets whose encoded id does not match their array slot. Valid CRUSH maps already use the canonical negative id corresponding to the bucket slot, so this restores the invariant expected by work->work[-1 - in->id] without changing valid map behavior.
Затронутые продукты
Ссылки
- CVE-2026-89656
- SUSE Bug 1280563
Описание
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: avoid divide-by-zero in __is_lut_linear() __is_lut_linear() computes the expected value of each entry with expected = i * MAX_DRM_LUT_VALUE / (size - 1); If it is ever called with a single-entry LUT, size - 1 is zero and the kernel takes a divide error (#DE). A LUT with fewer than two entries cannot describe a linear mapping anyway, so return false early instead of dividing by zero.
Затронутые продукты
Ссылки
- CVE-2026-89821
- SUSE Bug 1280996
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started qla_nvme_xmt_ls_rsp() bails out to the out: label when firmware is not started (!ha->flags.fw_started), but the out: path unconditionally calls qla_nvme_ls_reject_iocb(), which ends in qla2x00_start_iocbs() and an unconditional doorbell write to the request queue in-pointer register. This rings the firmware doorbell and queues an IOCB that stopped or resetting firmware cannot consume, and touches MMIO during the reset/EEH window where fw_started is also clear. Only emit the LS reject IOCB (and ring the doorbell) when fw_started is set; otherwise just clean up and return. The post-allocation failure cases (SRB alloc / qla2x00_start_sp() failure) run with firmware started and still send the reject. Apply the same guard to the reject emission in qla2xxx_process_purls_pkt().
Затронутые продукты
Ссылки
- CVE-2026-89842
- SUSE Bug 1281189
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak Several bsg handlers stage their request/reply in an uninitialized 256-byte on-stack buffer (uint8_t bsg[DMA_POOL_SIZE]) and fill it via sg_copy_to_buffer(), which only copies as many bytes as the user-supplied request payload. When the request is shorter than the structure, the remainder of the buffer is left holding stale stack data. qla2x00_read_fru_status() and qla2x00_read_i2c() then copy the full structure back to the reply payload with sg_copy_from_buffer(), leaking the uninitialized stack bytes to user space. The write/update paths do not copy the buffer back, but can feed uninitialized fields to the device. Zero the stack buffer at declaration in all five handlers, mirroring the heap kzalloc() approach, so short requests can no longer expose stale memory.
Затронутые продукты
Ссылки
- CVE-2026-89843
- SUSE Bug 1280984
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold vport_slock for host map update in report ID acquisition qla24xx_report_id_acquisition() format-1 handling drops vport_slock after taking the vport reference and then calls qla_update_host_map() without the lock. That reaches qla_update_vp_map(), which mutates the ha->host_map btree via btree_insert32()/btree_update32()/btree_remove32() and is documented to require vport_slock to be held by the caller. Running it unlocked can race concurrent host_map updates and corrupt the btree. The format-2 path in the same function already wraps its host_map update (SET_AL_PA) in vport_slock; the format-1 path is the lone outlier. Hold vport_slock across the format-1 qla_update_host_map() call to honor the documented locking contract. The vref_count taken in the loop keeps the vport valid, so this only adds the missing host_map serialization.
Затронутые продукты
Ссылки
- CVE-2026-89844
- SUSE Bug 1281183
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry() qla2x00_error_entry() reads ha->req_q_map[que] twice: once for the NULL check and again when assigning it to req. The map slot is cleared by qla25xx_free_req_que() (ha->req_q_map[que_id] = NULL under mq_lock) during queue teardown, while the response-queue interrupt that drives qla2x00_error_entry() is still registered (the IRQ is released later in qla25xx_free_rsp_que()). If the slot is set to NULL between the two reads, req becomes NULL and is dereferenced. Read the slot once into req and NULL-check the local before use. mq_lock is a mutex and cannot be taken from interrupt context, so the single read plus local check is the appropriate fix for the reported NULL dereference.
Затронутые продукты
Ссылки
- CVE-2026-89845
- SUSE Bug 1281001
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read In qla2x00_status_entry(), the FWI2 status path advances sense_data and shrinks par_sense_len by rsp_info_len: if (IS_FWI2_CAPABLE(ha)) { sense_data += rsp_info_len; par_sense_len -= rsp_info_len; } rsp_info_len is a 32-bit value taken directly from the target's FCP response (sf.rsp_data_len), while par_sense_len is the IOCB data area size (28 bytes for 24xx, 60 bytes for 29xx). A hostile or buggy target reporting an rsp_info_len larger than par_sense_len makes the unsigned subtraction underflow to a huge value and advances sense_data out of bounds. The underflowed par_sense_len then defeats the cap in qla2x00_handle_sense(): if (sense_len > par_sense_len) sense_len = par_sense_len; memcpy(cp->sense_buffer, sense_data, sense_len); so the memcpy reads up to SCSI_SENSE_BUFFERSIZE bytes from the out-of-bounds sense_data pointer, leaking adjacent response-ring/heap memory into the command's sense buffer. Clamp rsp_info_len to par_sense_len before the subtraction so par_sense_len can never underflow and sense_data stays within the IOCB data area. The fix sits before the comp_status switch, covering both qla2x00_handle_sense() call sites.
Затронутые продукты
Ссылки
- CVE-2026-89846
- SUSE Bug 1281184
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Avoid double completion in async IOCB timeout qla2x00_async_iocb_timeout() tries to abort a timed-out async IOCB. When qla24xx_async_abort_cmd() fails, both the SRB_LOGIN_CMD path and the SRB_CTRL_VP/default path scan outstanding_cmds[] for the SRB and then call sp->done(sp, QLA_FUNCTION_TIMEOUT) unconditionally, without checking whether the SRB was actually found and removed. If the response ISR completes the same handle first, it removes the SRB under qp_lock_ptr and runs sp->done() -> complete(sp->comp). The submitter qla24xx_control_vp() wakes from wait_for_completion(), clears sp->comp, drops its reference and returns, reclaiming the on-stack completion. The timer reference keeps the SRB alive across the timeout handler, but not the submitter's stack. The timeout then issues a second sp->done() -> qla_ctrlvp_sp_done(), which evaluates "if (sp->comp) complete(sp->comp)"; with the pointer loaded before the submitter's NULL store, complete() writes into the freed stack frame, a use-after-free. Track whether this path removed the SRB from outstanding_cmds and only call sp->done() when it did, so the command is completed exactly once by whichever path owns it. This mirrors the sp_found guard already used in qla24xx_abort_iocb_timeout().
Затронутые продукты
Ссылки
- CVE-2026-89847
- SUSE Bug 1281185
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Quiesce response IRQ before freeing request queue qla2xxx_delete_qpair() deletes the request queue before the response queue. qla25xx_delete_req_que() frees the request queue memory (kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is only released later, in qla25xx_free_rsp_que(). In that window the response interrupt can still fire, qla2xxx_msix_rsp_q() queues qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue() dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the status path), a use-after-free. The cancel_work_sync() added for the qpair teardown lives in the response free path, which runs after the request queue is already freed, so it does not protect rsp->req. Release the response-queue interrupt and flush qpair->q_work before deleting the request queue, so no late completion can reach the freed request queue. Clearing have_irq makes the subsequent qla25xx_free_rsp_que() skip its free_irq(), and the firmware queue-delete order (request then response) is preserved; the request-delete mailbox completes on the default vector and is unaffected by dropping the qpair response interrupt early.
Затронутые продукты
Ссылки
- CVE-2026-89848
- SUSE Bug 1281179
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path qla2x00_status_entry() filters out non-TYPE_SRB entries and the SRB_NVME_CMD, SRB_BIDI_CMD and SRB_TM_CMD types, then falls through to a SCSI fast path that assumes the command is an SRB_SCSI_CMD. The first thing on that path, qla_chk_edif_rx_sa_delete_pending(), and the subsequent handling both evaluate GET_CMD_SP(sp), i.e. sp->u.scmd.cmd. The srb u union overlays the SCSI command pointer with other command layouts (bsg_job, iocb_cmd). If firmware delivers an unexpected STATUS_TYPE IOCB for a non-SCSI handle, sp->u.scmd.cmd can read as a non-NULL garbage pointer, bypassing the NULL checks in qla_chk_edif_rx_sa_delete_pending() and at the cp == NULL test, and leading to a wild pointer dereference. Reject any SRB whose type is not SRB_SCSI_CMD before entering the fast path. The outstanding_cmds slot is left untouched so a genuinely non-SCSI command still completes through its proper handler.
Затронутые продукты
Ссылки
- CVE-2026-89849
- SUSE Bug 1281180
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Don't query firmware state while chip is down qla2x00_fw_state_show() initializes rval to QLA_FUNCTION_FAILED and jumps to the out: label when the chip is down or EEH is busy. The out: block then re-issued qla2x00_get_firmware_state() because rval != QLA_SUCCESS, defeating the chip-down/EEH-busy guards and issuing a mailbox command (outside optrom_mutex) during ISP reset or PCI error recovery, which can hang the adapter. It also turned a normal in-lock mailbox failure into a second unsynchronized mailbox attempt. Make the out: fallback only mark the firmware state as unknown. The mailbox is now issued at most once, inside optrom_mutex, and only when the chip is up and not EEH-busy.
Затронутые продукты
Ссылки
- CVE-2026-89850
- SUSE Bug 1281181
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix FCE trace enable parsing in debugfs qla2x00_dfs_fce_write() called kstrtoul() with a NULL result pointer, so a successful parse would dereference NULL and oops. Worse, the int return value (0 on success, negative errno on failure) was assigned to the unsigned long enable flag, inverting the intended logic: a valid number was treated as "disable" while a parse failure enabled FCE. Parse the value into enable and propagate parse errors to userspace.
Затронутые продукты
Ссылки
- CVE-2026-89851
- SUSE Bug 1281175
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state() The mbx_cmd_t is allocated on the stack but left uninitialized. qla2x00_mailbox_command() has several early-return paths (PCI permanent failure, device failed, EEH busy, ISP abort pending, mailbox access timeout, purge mbox) that return without writing the input mailbox registers back into mcp->mb[]. qla2x00_get_firmware_state() then unconditionally copies mcp->mb[1..6] (and mb[12]) into the caller's states[] array regardless of the return value. On such a failure the copied values are uninitialized kernel stack memory, which is then exposed to userspace via the fw_state and mpi_fw_state sysfs handlers. Zero the mailbox struct so a failed query yields deterministic zeroed state instead of leaking stack contents.
Затронутые продукты
Ссылки
- CVE-2026-89852
- SUSE Bug 1281174
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix FCE trace use-after-free during firmware dump qla2x00_free_fce_trace() freed and cleared ha->fce while holding only fce_mutex. The firmware-dump consumers qla27xx_fwdt_entry_t264() and qla25xx_copy_fce() read ha->fce (NULL check followed by a copy of the buffer) under hardware_lock and never take fce_mutex. A debugfs FCE disable could therefore free the DMA buffer between a dump's NULL check and its copy, resulting in a use-after-free. Unpublish ha->fce under hardware_lock, then release the lock and free the DMA buffer (dma_free_coherent() may sleep). A concurrent dump either completes its check and copy with the buffer still valid, or observes ha->fce == NULL and skips it.
Затронутые продукты
Ссылки
- CVE-2026-89853
- SUSE Bug 1281173
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix cs84xx use-after-free on host teardown qla84xx_put_chip() drops the last reference to ha->cs84xx and frees it via __qla84xx_chip_release() without clearing ha->cs84xx. During teardown it ran before scsi_remove_host(), which is what removes the 84xx_fw_version host sysfs attribute. A concurrent read of that attribute in the window between the two calls executes qla24xx_84xx_fw_version_show(), which dereferences the freed ha->cs84xx, resulting in a use-after-free. Move qla84xx_put_chip() to after scsi_remove_host() in both qla2x00_remove_one() and qla2x00_disable_board_on_pci_error(). Once scsi_remove_host() returns, the sysfs attribute is gone and kernfs has drained any in-flight show(), so no reader can touch cs84xx; the put still runs before the host and ha are freed.
Затронутые продукты
Ссылки
- CVE-2026-89854
- SUSE Bug 1281165
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize flash version read in reset handler The "update cache versions without reset" sysfs reset operation (0x20261) calls get_flash_version(), which reads hardware flash registers, without holding ha->optrom_mutex. The VPD update path serializes the same call under optrom_mutex, so this reset path can interleave its flash register accesses with a concurrent VPD or optrom flash operation and corrupt the reads. Hold ha->optrom_mutex across the get_flash_version() call to match the VPD update path.
Затронутые продукты
Ссылки
- CVE-2026-89855
- SUSE Bug 1281164
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject qla_nvme_ls_reject_iocb() allocates from and advances the request ring through __qla2x00_alloc_iocbs() (which assumes the hardware_lock is held) and qla2x00_start_iocbs() (which advances the ring and rings the request-in doorbell), but takes no lock itself. Two of its callers invoke it without the producer lock held: - qla_nvme_xmt_ls_rsp(), the NVMe-FC .xmt_ls_rsp transport callback, on its error path, and - qla2xxx_process_purls_pkt(), run from the purex work/DPC context. Both use ha->base_qpair, whose qp_lock_ptr is hardware_lock, so they can run concurrently with normal I/O submission on the base ring and corrupt the ring producer state, leading to duplicated or dropped commands. The third caller, qla2xxx_process_purls_iocb(), runs inside qla24xx_process_response_queue() with the qpair lock already held and is safe; that is also why the lock cannot be taken inside the helper itself (it would recursively re-acquire hardware_lock on the response path). Take qp_lock_ptr around the two unlocked callers and document the helper as caller-locked. Both run in process context, so spin_lock_irqsave() is used and nothing in the locked region sleeps.
Затронутые продукты
Ссылки
- CVE-2026-89857
- SUSE Bug 1281211
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions() qla2x00_update_fru_versions() copies the user-supplied BSG request into a fixed 256-byte stack buffer (bsg[DMA_POOL_SIZE]) and then iterates list->count times over the qla_image_version array embedded in that buffer, advancing the image pointer each iteration. count is taken directly from user input with no upper bound, while only (DMA_POOL_SIZE - sizeof(list->count)) / sizeof(struct qla_image_version) = 6 entries actually fit. A larger count walks the image pointer off the end of the stack buffer, reading adjacent kernel stack memory and sending it to the device via qla2x00_write_sfp(). Reject requests whose declared count does not fit in the buffer.
Затронутые продукты
Ссылки
- CVE-2026-89858
- SUSE Bug 1281334
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak qla2x00_do_dport_diagnostics() allocates the qla_dport_diag response buffer with kmalloc_obj() (non-zeroing) and, on success, copies the full sizeof(*dd) back to user space via sg_copy_from_buffer(). The inbound sg_copy_to_buffer() only fills as many bytes as the user request payload provides, and qla26xx_dport_diagnostics() zeroes only dd->buf. The options and unused[] fields are therefore copied out uninitialized, leaking kernel heap contents to user space. Allocate with kzalloc_obj(), matching qla2x00_do_dport_diagnostics_v2().
Затронутые продукты
Ссылки
- CVE-2026-89859
- SUSE Bug 1281333
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Initialize NVMe abort_work once at submission qla_nvme_fcp_abort() and qla_nvme_ls_abort() ran INIT_WORK() on priv->abort_work immediately before schedule_work(). INIT_WORK() reinitializes the work_struct, resetting its list head and clearing the pending bit. If an abort is issued more than once for the same command (for example, concurrent transport teardown and a timeout-driven abort), the second INIT_WORK() reinitializes a work item that is already queued, which can corrupt the workqueue list and lead to crashes or a looping worker. Initialize priv->abort_work once at command submission, next to the existing per-command spin_lock_init(&priv->cmd_lock), and leave only schedule_work() in the abort paths. schedule_work() already does nothing when the work item is still pending, so a repeated abort no longer disturbs an in-flight work item. The command is not returned to the transport until the final kref_put()/release callback runs after abort_work has completed, so the work item is idle before priv is reused and the single submission-time INIT_WORK() is safe.
Затронутые продукты
Ссылки
- CVE-2026-89860
- SUSE Bug 1281357
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition() In the format 1 path, the virtual port is located on ha->vp_list while holding vport_slock, but the lock is dropped before vp is used: qla_update_host_map() is called and VP_IDX_ACQUIRED/REGISTER_FC4_NEEDED/ REGISTER_FDMI_NEEDED are set on vp. No reference is taken across that window, so a concurrent qla24xx_deallocate_vp_id() can tear the vport down and free it, leading to a use-after-free. Take a vport reference (vref_count) under vport_slock when the matching vp is found, and drop it after the last use of vp. qla24xx_deallocate_vp_id() waits for vref_count to reach zero before unlinking and freeing the vport, so the pointer stays valid. This matches the reference idiom already used by the other ha->vp_list traversals.
Затронутые продукты
Ссылки
- CVE-2026-89861
- SUSE Bug 1281353
- SUSE Bug 1281354
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix BSG job leak on validate flash image error path qla28xx_validate_flash_image() returns QLA_SUCCESS (0) unconditionally, telling the FC BSG transport (fc_bsg_host_dispatch()) that the driver owns and will complete the request. But bsg_job_done() is guarded by "if (!rval)", so on the error path (rval == -EINVAL) neither the driver nor the transport completes the job. The request dangles until it times out, leaking block layer resources. Commit c2c68225b145 ("scsi: qla2xxx: Fix bsg_done() causing double free") added the "if (!rval)" guard to a batch of BSG handlers. That is correct for handlers that also return the error code (the transport then completes the job once via fail_host_msg), but this function returns QLA_SUCCESS unconditionally, so the guard turned a correct single completion into a leak. Always call bsg_job_done(): bsg_reply->result is DID_OK and the error is reported in vendor_rsp[0], and since the function returns 0 the transport will not complete the job a second time.
Затронутые продукты
Ссылки
- CVE-2026-89862
- SUSE Bug 1281214
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: edif: Fix NULL pointer deref in RX SA delete check qla_chk_edif_rx_sa_delete_pending() obtains the SCSI command via GET_CMD_SP(sp) and immediately dereferences cmd->sc_data_direction. That command pointer can be NULL: the firmware may post a status completion for a command that has already been returned or aborted. The caller qla2x00_status_entry() acknowledges this on the very same status path, re-fetching GET_CMD_SP(sp) and bailing out with the "Command already returned" message when it is NULL -- but that check runs only after qla_chk_edif_rx_sa_delete_pending() has already dereferenced the pointer, so a NULL cmd crashes the kernel in interrupt context. Return early when cmd is NULL, before touching cmd->sc_data_direction.
Затронутые продукты
Ссылки
- CVE-2026-89863
- SUSE Bug 1281251
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound i2c->length in I2C bsg handlers struct qla_i2c_access carries a 16-bit length field alongside a fixed 64-byte buffer: struct qla_i2c_access { uint16_t device, offset, option, length; uint8_t buffer[0x40]; } __packed; qla2x00_write_i2c() and qla2x00_read_i2c() use the user-supplied i2c->length without any bounds check. i2c is overlaid on a 256-byte on-stack buffer and sfp is a 256-byte DMA-pool buffer, so a length up to 65535 overruns both: - write: memcpy(sfp, i2c->buffer, i2c->length) over-reads the stack and over-writes the sfp heap buffer, and qla2x00_write_sfp() then DMAs i2c->length bytes out of the 256-byte buffer. - read: qla2x00_read_sfp() DMAs i2c->length bytes into the 256-byte sfp, then memcpy(i2c->buffer, sfp, i2c->length) overflows the 64-byte buffer inside the on-stack array. A caller holding CAP_SYS_RAWIO can use this to corrupt the heap and the kernel stack. Reject requests whose length exceeds the buffer before any copy or DMA transfer in both handlers.
Затронутые продукты
Ссылки
- CVE-2026-89864
- SUSE Bug 1281253
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE (256-byte) bounce buffer obtained from dma_pool_alloc(), which does not zero the allocation. They initialize only a few leading bytes before handing the buffer to qla2x00_write_sfp(). qla2x00_write_sfp() can override the transfer length with a user-supplied value: if (len == 1) opt |= BIT_0; if (opt & BIT_0) len = *sfp; *sfp is the first byte of the (user-controlled) payload, so len can grow up to 255. The device then DMA-reads len bytes from the 256-byte pool buffer. Since only a small prefix was written (e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU status register), the hardware reads past the initialized region and writes up to ~219 bytes of stale DMA-pool heap memory to the device flash. Allocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers so any bytes beyond the initialized data are zero rather than stale heap contents.
Затронутые продукты
Ссылки
- CVE-2026-89865
- SUSE Bug 1281254
Описание
In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always flush vpid02 on first use Make sure vpid02 is always flushed on first use by setting last_vpid=0 when allocating vpid02. nested_vmx_transition_tlb_flush() will always detect a VPID change on first VM-Enter after VMXON, because VPID=0 in vmcs12 is not allowed if L1 enables VPID. This avoids using stale TLB entries from a previous lifetime of the VPID, that might have been associated with a different vCPU (or a completely different VM). Note that last_vpid is already being initialized as 0 when the vCPU is created, but it is not reset when vpid02 is freed on VMXOFF. Hence, the problem can only occur if L1 does VMXOFF -> VMXON, runs an L2, and KVM happens to reuse a VPID that has TLB entries on the physical CPU.
Затронутые продукты
Ссылки
- CVE-2026-89932
- SUSE Bug 1281360
- SUSE Bug 1281362
Описание
In the Linux kernel, the following vulnerability has been resolved: xhci: fix lost bounce buffers on TDs spanning several ring segments When a TD reaches a link TRB with data that is not aligned to the endpoint's wMaxPacketSize, xhci_align_td() stages the unalignable tail through the bounce buffer of the ring segment holding that link TRB. xhci_unmap_td_bounce_buffer() later unmaps it and, for IN transfers, copies the data back into the URB's buffer. The enqueue path records the segment that was bounced in td->bounce_seg, under the assumption that a TD never spans more than two ring segments. That assumption does not hold: a TD large enough to span three or more segments crosses several link TRBs and can be bounced at each of them. Only the last one survives in td->bounce_seg, so every earlier bounce buffer is neither copied back nor DMA unmapped. The URB still completes with actual_length equal to the requested length and no error, so the transfer looks successful while a wMaxPacketSize sized hole in the destination buffer silently keeps its previous contents. It also leaks a DMA mapping per dropped bounce. Any sufficiently large and fragmented bulk transfer can hit this. It was found with a USB mass storage device behind xHCI backing a dm-verity target with 512 byte hash blocks, where the stale data is detected rather than silently consumed. The device enumerates as SuperSpeed, so wMaxPacketSize is 1024, while dm-bufio issues one 512 byte bio per hash block. verity_prefetch_io() makes the block layer merge hundreds of them into a single request of up to 512 scatterlist entries of 512 bytes each. At 256 TRBs per ring segment such a TD spans three segments, and every segment boundary falls on an odd multiple of 512, i.e. unaligned to wMaxPacketSize. dm-bufio then caches a hash block holding stale data and dm-verity declares the metadata block corrupted: device-mapper: verity: 8:2: metadata block 10850 is corrupted A reproducer running this under qemu is available at https://github.com/baloo/xhci-verity The bounce state (bounce_buf, bounce_dma, bounce_len, bounce_offs) already lives on the ring segment, so there is nothing extra to track. Keep recording the last bounced segment in td->bounce_seg and, on completion, walk the segments from td->start_seg up to it, unmapping every segment that still has a pending bounce. Stopping at td->bounce_seg rather than td->end_seg matters: a bounce implies the TD continues past that segment's link TRB, so bounce_seg is always strictly before end_seg, and a later TD may already have started in end_seg and been bounced there. Walking that far would copy a foreign bounce buffer into this URB and unmap it twice. It also keeps the walk correct if a TD ever wraps the whole ring so that end_seg == start_seg. [mn: Add ring->num_segs check to prevent unlikely infinite for loop.]
Затронутые продукты
Ссылки
- CVE-2026-90015
- SUSE Bug 1281080
Описание
In the Linux kernel, the following vulnerability has been resolved: slip: remove slip_hangup() to fix use-after-free in slip_receive_buf() Jaeyoung Chung and Eulgyu Kim reported a slab-use-after-free read in slip_receive_buf() when racing against tty hangup. tty_ldisc_hangup() calls ld->ops->hangup() while holding only a read lock on tty->ldisc_sem (via tty_ldisc_ref()). Because slip_hangup() simply called slip_close(), it ran concurrently with reader functions such as slip_receive_buf(). slip_close() unregisters and frees the net device and its private struct slip, causing concurrent reader threads in slip_receive_buf() to dereference freed memory. Line discipline close() is already guaranteed to be called under the write lock of tty->ldisc_sem during hangup processing (in tty_ldisc_reinit() or tty_ldisc_kill()). Remove slip_hangup() so teardown is serialized cleanly by slip_close().
Затронутые продукты
Ссылки
- CVE-2026-90057
- SUSE Bug 1281650
Описание
In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in rds_cong_map_updated() rds_cong_map_updated() runs after a peer's congestion map has been rewritten (by rds_tcp_cong_recv() and rds_ib_cong_recv(), or the clear-all in the loopback and IB send-completion paths). It bumps rds_cong_generation and then checks waitqueue_active() on map->m_waitq and on rds_poll_waitq to decide whether anyone needs waking. atomic_inc() carries no ordering and waitqueue_active() is a plain load, so nothing orders the map and generation stores before the wait queue reads. The waiters do the mirror image: rds_cong_wait() adds itself to m_waitq and then tests the port bit, and rds_poll() registers on rds_poll_waitq and then reads the generation. That is the store-buffering pattern described above waitqueue_active() in include/linux/wait.h - the updater can observe an empty wait queue while the waiter still observes the port as congested, and no wake-up is issued. rds_cong_wait() is an interruptible sleep with no timeout, so a sender blocked on a congested port stays blocked until the next congestion update from that peer arrives or a signal is delivered. A poll() waiter misses the map-updated notification the same way. Use wq_has_sleeper(), which is waitqueue_active() preceded by the required full barrier, as rds_tcp_state_change() already does for the same pattern.
Затронутые продукты
Ссылки
- CVE-2026-90081
- SUSE Bug 1281490
Описание
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN New sk should not be added to parent socket accept queue after last l2cap_sock_cleanup_listen() has run in l2cap_sock_teardown_cb() and state set to BT_CLOSED, as that can result to UAF on dereferencing the dangling parent reference. l2cap_sock_new_connection_cb() may race with parent l2cap_chan teardown, due to chan->state accessed without consistent locking: [Task 1] [Task 2] l2cap_sock_release(parent) l2cap_connect l2cap_sock_shutdown pchan = l2cap_global_chan_by_psm l2cap_chan_lock(pchan) l2cap_chan_close l2cap_sock_teardown_cb pchan->state = BT_CLOSED l2cap_chan_unlock(pchan) ------> l2cap_chan_lock(pchan) l2cap_new_connection l2cap_sock_new_connection_cb l2cap_chan_lock(pchan) <-------- l2cap_chan_unlock(pchan) l2cap_sock_kill(parent) /* bt_sk(sk)->parent dangling */ Fix by adding check for sk_state == BT_LISTEN after acquiring sk lock in l2cap_sock_new_connection_cb(). Add lock_sock() around sk_state writes where missing, to avoid data races. Although the data races on pchan->state should be fixed too, this defensive sk_state check probably makes sense in any case.
Затронутые продукты
Ссылки
- CVE-2026-90092
- SUSE Bug 1281384
Описание
In the Linux kernel, the following vulnerability has been resolved: NFSv4.2: fix LAYOUTSTATS send buffer exhaustion encode_layoutstats_maxsz budgets XDR_QUADLEN(PNFS_LAYOUTSTATS_MAXSIZE), i.e. 256 bytes, for the layoutupdate4 body written by the layout driver. The flexfiles record can exceed that. ff_layout_encode_ff_layoutupdate() emits, per data server, a netaddr4, an nfs_fh4, two ff_io_latency4, an nfstime4 and a bool. A data server whose filehandle is NFS_MAXFHSIZE bytes long already accounts for 132 of those bytes, and the two ff_io_latency4 at 64 bytes each, the nfstime4 and the bool add a further 144, so the body passes 256 bytes before the netaddr4 is encoded at all. encode_layoutstats() additionally writes the deviceid4 and the layoutupdate4 lou_type word, neither of which the macro accounts for. The filehandle and the address are both chosen by the server, through LAYOUTGET and GETDEVICEINFO, so it can drive the encoder past the end of the send buffer. xdr_reserve_space() returns NULL once that happens, and the two ff_layout_encode_io_latency() calls run with dss_info->mirror->lock held, so a NULL return there leaves the lock permanently held. Raise PNFS_LAYOUTSTATS_MAXSIZE to 384 so that the record fits inside the reservation.
Затронутые продукты
Ссылки
- CVE-2026-90103
- SUSE Bug 1281538
- SUSE Bug 1281539
Описание
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix request buffer leak in smb2_new_read_req() smb2_new_read_req() allocates the request buffer with smb2_plain_req_init() but only publishes it to the caller with *buf = req at the very end of the function. Two error returns sit in between: rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server, (void **) &req, total_len); if (rc) return rc; if (server == NULL) return -ECONNABORTED; [...] rdata->mr = smbd_register_mr(server->smbd_conn, &rdata->subreq.io_iter, true, need_invalidate); if (!rdata->mr) return -EAGAIN; On either of them the buffer is neither released nor handed back, so it is leaked. The caller cannot clean up after it: smb2_async_readv() does 'goto out' on a non-zero return, which skips the cifs_small_buf_release(buf) at async_readv_out, and buf has not been assigned at that point in any case. The write path has never had this problem. smb2_async_writev() registers the memory region inline and jumps to its release label instead of returning: wdata->mr = smbd_register_mr(...); if (!wdata->mr) { rc = -EAGAIN; goto async_writev_out; } Commit b7972092199f ("cifs: smbd: Retry on memory registration failure") changed both sides from -ENOBUFS to -EAGAIN in a single patch, which puts the two shapes next to each other. Only the -EAGAIN return is reachable in practice, because smb2_plain_req_init() calls smb2_reconnect() first and that already fails with -EIO when server is NULL, before anything is allocated. Both returns are given the same treatment here rather than leaving one of them correct only by accident. Because -EAGAIN is a replayable error, the failure also reaches the retry block at the end of smb2_async_readv(), which marks the subrequest NETFS_SREQ_NEED_RETRY, so a failing registration can be retried rather than ending the I/O, and every attempt that reaches it leaks another buffer. smb2_should_replay() short-circuits on tcon->retry, so on a hard mount the attempt count is not bounded by the retrans setting. Only the asynchronous read path is affected. The synchronous SMB2_read() caller passes rdata == NULL and the memory registration block is guarded on rdata. The memory registration failure path was pointed out by the Sashiko AI reviewer while it was reviewing an unrelated patch to smb2_async_readv().
Затронутые продукты
Ссылки
- CVE-2026-90125
- SUSE Bug 1281580
Описание
In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO because it loops back to r0 while the socket is still in the TCP_SYN_SENT state, causing it to be incorrectly dispatched to the connecting-client path. The unexpected packet type encountered there sets sk_err to EPROTO. After that, it invokes a listen() call on the same socket. This listen() call succeeds because the kernel's listening path never inspects or clears sk_err. Then, a new socket (r1) is created as a normal client and connects to r0. However, vsock_accept() rejects this incoming connection because the listener's sk_err still holds the EPROTO error from the earlier failed self-connect. This rejection causes the child socket created for r1's connection to never be freed on virtio or hyperv transports; only the VMCI transport implements pending_work to revisit and clean up a rejected socket. For a non-blocking connect(), vsock_connect() may return -EINPROGRESS immediately, and vsock_connect_timeout() can later set sk->sk_err asynchronously. Since no vsock transport ever sets sk_err on a socket while it is in TCP_LISTEN state, checking it in vsock_accept() serves no purpose and only carries forward errors left behind by earlier, unrelated connection attempts on the same socket. Remove the checks so accept() no longer rejects valid incoming connections because of a stale error, which also avoids the resource leak described above.
Затронутые продукты
Ссылки
- CVE-2026-90138
- SUSE Bug 1281535
Описание
In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Don't leak the extension cell pointer in the bounce payload The bounce_error_event() embeds the failed event in the bounce payload by pointing data.ext.ptr at it. When that event is a queued variable-length event, its own data.ext.ptr holds the address of its first extension cell, put there by snd_seq_event_dup(). The payload goes out verbatim through snd_seq_expand_var_event(), so the address reaches userspace. That is the same address commit 705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read") removed from the event header. The read path still clears it there, just above the call that expands the payload. Embed a sanitised copy instead, treated exactly as snd_seq_read() treats the header. A stack copy is enough because delivery is synchronous and snd_seq_event_dup() copies before returning. An unprivileged client reaches this by setting SNDRV_SEQ_FILTER_BOUNCE, queueing a variable-length event to a port that does not exist and reading the bounce back. Eight bytes on 64-bit, from its own pool.
Затронутые продукты
Ссылки
- CVE-2026-90220
- SUSE Bug 1281781
Описание
In the Linux kernel, the following vulnerability has been resolved: nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed() Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a partition device or write through a read-only file descriptor. Pass flags and open_for_write through and reject disallowed commands with -EACCES.
Затронутые продукты
Ссылки
- CVE-2026-90227
- SUSE Bug 1281705
- SUSE Bug 1281709
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path qla2x00_sysfs_read_vpd() called ha->isp_ops->read_optrom() a second time after releasing optrom_mutex. The repeated read is redundant and, unlike the first, runs without optrom_mutex held, exposing flash access to concurrent optrom operations. Drop the duplicate call.
Затронутые продукты
Ссылки
- CVE-2026-90285
- SUSE Bug 1282065
Описание
In the Linux kernel, the following vulnerability has been resolved: isofs: release zisofs block pointer buffer head zisofs_fill_pages() reads the compressed block pointer table. The error paths release the current buffer_head, the loop also releases the old buffer_head when it advances. However, the success path leaves the last buffer_head referenced. Release it before returning success.
Затронутые продукты
Ссылки
- CVE-2026-90434
- SUSE Bug 1281993
Описание
In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix integer overflow of user QP buffer size set_user_buf_size() computes the QP buffer size by left-shifting the user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers. A sufficiently large rq.wqe_cnt causes signed integer overflow, which is undefined behavior, and yields a small or negative buf_size, causing ib_umem_get() to map a buffer smaller than the hardware will actually write into. Replace the shifts and addition with check_shl_overflow() and check_add_overflow(), rejecting invalid user inputs. Moreover, guard the identical shift computing qp->sq.offset in _create_user_qp() before set_user_buf_size() is reached.
Затронутые продукты
Ссылки
- CVE-2026-90435
- SUSE Bug 1282002
- SUSE Bug 1282004
Описание
In the Linux kernel, the following vulnerability has been resolved: smb: client: harden DFS cache against invalid target hints Currently, get_tgt_name() returns ERR_PTR(-ENOENT) when ce->tgthint is NULL, and dfs_cache_noreq_update_tgthint() assumes ce->tgthint is always valid. In preparation for clearing ce->tgthint in free_tgts(), harden callers of get_tgt_name() against ERR_PTR results and harden dfs_cache_noreq_update_tgthint() against NULL pointer dereferences.
Затронутые продукты
Ссылки
- CVE-2026-93210
- SUSE Bug 1282737
Описание
In the Linux kernel, the following vulnerability has been resolved: lockd: fix swapped arguments in nlmsvc_match_ip() When releasing locks by server IP address via /proc/fs/nfsd/unlock_ip, nlmsvc_unlock_all_by_ip() calls nlm_traverse_files() with the server sockaddr as the opaque @data argument: nlm_traverse_files(server_addr, nlmsvc_match_ip, NULL); The match callback is later invoked from nlm_traverse_locks() as: match(lockhost, host); where the first argument is the nlm_host that owns the lock, and the second argument is the @data that was originally passed down (here the server sockaddr). This is the convention every other match callback relies on (nlmsvc_mark_host(), nlmsvc_same_host(), nlmsvc_is_client()): arg1 is the real nlm_host, arg2 is the caller-supplied reference value. nlmsvc_match_ip() has had these two arguments reversed ever since the unlock-by-IP feature was introduced in commit 4373ea84c84d ("lockd: unlock lockd locks associated with a given server ip"): return rpc_cmp_addr(nlm_srcaddr(host), datap); Here @host is actually the server sockaddr, so nlm_srcaddr(host) dereferences a struct sockaddr as a struct nlm_host and reads garbage at the offset of h_srcaddr; meanwhile @datap is actually the lock owner's nlm_host but is compared as a sockaddr. As a result the comparison practically never matches and locks are not released for the requested IP. Swap the arguments so the lock owner's source address is compared against the requested server address: return rpc_cmp_addr(nlm_srcaddr(datap), (struct sockaddr *)host); [ cel: fix the misleading typedef parameter names too ]
Затронутые продукты
Ссылки
- CVE-2026-93231
- SUSE Bug 1282778
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix response queue over-consumption in __qla_consume_iocb() qla24xx_process_response_queue() advances ring_ptr past the head IOCB before dispatching, so by the time __qla_consume_iocb() runs, ring_ptr already points at the first continuation IOCB. The function however looped purex->entry_count times starting at ring_ptr. As entry_count includes the head, this consumed one entry too many: it stamped RESPONSE_PROCESSED on the next, unrelated IOCB and advanced the ring past it, silently dropping a legitimate firmware response. The head IOCB's signature was also never marked. Mark the head processed and account for it, then consume only the entry_count - 1 continuation IOCBs, matching __qla_copy_purex_to_buffer().
Затронутые продукты
Ссылки
- CVE-2026-93242
- SUSE Bug 1282684
Описание
In the Linux kernel, the following vulnerability has been resolved: md/raid5-ppl: fix use-after-free in ppl_do_flush() The loop in ppl_do_flush() continues iterating after calling ppl_io_unit_finished(), touching io->pending_flushes and leading to a use-after-free. Add a break statement to stop the loop once io is freed.
Затронутые продукты
Ссылки
- CVE-2026-93262
- SUSE Bug 1283004
- SUSE Bug 1283005
Описание
In the Linux kernel, the following vulnerability has been resolved: ext4: fix circular lock dependency in ext4_ext_migrate Move iput(tmp_inode) after ext4_writepages_up_write() to avoid a circular lock dependency between s_writepages_rwsem and sb_internal (freeze protection). The deadlock scenario: CPU0 (EXT4_IOC_MIGRATE) CPU1 (orphan cleanup during mount) ---- ---- ext4_ext_migrate() ext4_writepages_down_write() s_writepages_rwsem (write) ext4_evict_inode() sb_start_intwrite() [sb_internal] ... ext4_writepages() s_writepages_rwsem (read) [BLOCKED] iput(tmp_inode) ext4_evict_inode() sb_start_intwrite() [BLOCKED] The tmp_inode is a temporary inode with nlink=0 created solely for building the extent tree. Its eviction does not require s_writepages_rwsem protection, so deferring iput() until after releasing the rwsem is safe.
Затронутые продукты
Ссылки
- CVE-2026-93269
- SUSE Bug 1282810
Описание
In the Linux kernel, the following vulnerability has been resolved: cifs: validate idmap key payload length The cifs.idmap key type stores its payload length in key->datalen, which is limited to U16_MAX. Accepting a larger key payload truncates the recorded length and can make later users interpret the payload using inconsistent bounds. Reject oversized preparsed payloads before allocating or copying them. This keeps key->datalen consistent with the stored data for both inline and separately allocated idmap payloads.
Затронутые продукты
Ссылки
- CVE-2026-93785
- SUSE Bug 1282869
Описание
In the Linux kernel, the following vulnerability has been resolved: smb: client: bound dirent name against end of SMB response in cifs_filldir cifs_filldir() copies the entry name out of an SMB1 TRANS2_FIND_FIRST / FIND_NEXT response using a length (de.namelen) supplied by the server. The kmalloc'd SMB response buffer is bounded, but nothing checks that de.name + de.namelen still lies inside that buffer before the eventual filldir64() -> verify_dirent_name() -> memchr() reads namelen bytes. A hostile SMB1 server that returns an oversized FileNameLength in a directory entry therefore causes memchr() to read past the end of the response slab buffer. Reachable from any user who can list a directory on a CIFS mount served by an attacker-controlled server (getdents64() on the mounted directory): BUG: KASAN: slab-out-of-bounds in memchr+0x71/0x80 Read of size 1 at addr ffff88800e0640cc by task poc/115 Call Trace: dump_stack_lvl+0x64/0x80 print_report+0xce/0x620 kasan_report+0xec/0x120 memchr+0x71/0x80 filldir64+0x4c/0x6a0 cifs_filldir.constprop.0+0x9bb/0x1e00 cifs_readdir+0x2101/0x3380 iterate_dir+0x19c/0x520 __x64_sys_getdents64+0x126/0x210 do_syscall_64+0x107/0x5a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Pass the end-of-response pointer down to cifs_filldir() and reject entries whose name would extend past that boundary. This bug was discovered by Artiphishell's vTriage pipeline, which generated a userspace reproducer (an emulated hostile SMB1 server plus a getdents64() client) that reliably triggers the KASAN report on an unpatched kernel. The fix below was drafted with the Claude coding assistant; a userspace reproducer is available on request.
Затронутые продукты
Ссылки
- CVE-2026-93787
- SUSE Bug 1282932
- SUSE Bug 1282933
Описание
In the Linux kernel, the following vulnerability has been resolved: perf: Fix addr_filter_ranges lifetime Lee Jia Jie reported that since event::addr_filter_ranges is used under RCU, it should be RCU freed.
Затронутые продукты
Ссылки
- CVE-2026-93817
- SUSE Bug 1283017
- SUSE Bug 1283368
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock The fcport->unsol_ctx_head list is modified from several contexts without a common lock. Entries are added in qla2xxx_process_purls_iocb() from the response queue ISR (under the qpair qp_lock), while they are removed from qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp() (NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB completion). The qpair qp_lock cannot serialize this per-fcport list since multiqueue adapters add entries through different qpairs, so a concurrent add and delete (or two concurrent deletes) can corrupt the list pointers. Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del() on unsol_ctx_head. The add nests under the existing qp_lock; no delete path takes qp_lock, so the lock order is consistent and deadlock free.
Затронутые продукты
Ссылки
- CVE-2026-97527
- SUSE Bug 1283343
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked when the NVMe transport calls back to transmit the LS response. On the error (out:) path the function frees uctx with kfree() but never removes it from the list. This leaves a freed node in fcport->unsol_ctx_head: the next list_add_tail() for that fcport writes through the freed node, and a subsequent list_del() can corrupt the list or panic. Unlink uctx with list_del() before kfree() on the error path, matching the other free sites in qla_nvme_release_lsrsp_cmd_kref() and qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only returns the SRB to its pool and does not invoke sp->put_fn, so the out: path is the sole free and uctx is always still linked there.
Затронутые продукты
Ссылки
- CVE-2026-97528
- SUSE Bug 1283360
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature qla27xx_copy_multiple_pkt() and qla27xx_copy_fpin_pkt() poll rsp_q->ring_ptr->signature for RESPONSE_PROCESSED (0xDEADDEAD) to decide whether the next continuation IOCB has arrived, spinning on cpu_relax() without advancing the ring or decrementing the entry count while it has not. response_t::signature lives at byte offset 60, but a continuation IOCB (sts_cont_entry_t / struct sts_cont_entry_ext) carries raw FC frame payload at that offset (data[56..59]). A received frame whose payload bytes happen to equal 0xDEADDEAD is therefore misread as "not yet arrived", and the loop spins forever in interrupt/DPC context, causing a CPU soft lockup. The poll is also unnecessary: callers of qla27xx_copy_multiple_pkt() (PT_LS4_UNSOL and the NVMe purls path) already gate on qla_chk_cont_iocb_avail(), which guarantees all entry_count IOCBs are present before copying begins. The sibling helper __qla_copy_purex_to_buffer() already drops the signature poll and relies on the entry_type == STATUS_CONT_TYPE guard instead. Remove the signature busy-wait from both helpers, keeping the entry_type guard, and gate the FPIN path with qla_chk_cont_iocb_avail() so it defers and re-processes on the next interrupt once all continuation IOCBs have arrived, mirroring the ELS_AUTH_ELS and PT_LS4_UNSOL arms. With this the signature field is never read on a continuation IOCB, eliminating the payload-aliasing lockup.
Затронутые продукты
Ссылки
- CVE-2026-97530
- SUSE Bug 1283159
- SUSE Bug 1283160
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Skip vport under deletion in report ID acquisition qla24xx_report_id_acquisition() format-1 handling walks ha->vp_list under vport_slock, takes a vref_count on the matching vport and calls qla_update_host_map() to register its port id. A vport teardown via qla24xx_vport_delete() sets VPORT_DELETE, then qla24xx_disable_vp() removes the vport from the host_map btree and zeroes vha->d_id (RESET_AL_PA). The vport is only unlinked from vp_list later, in qla24xx_deallocate_vp_id(), which clears vp_map[idx] (RESET_VP_IDX) but does not touch host_map. In the window in between, report ID acquisition can still find the vport on vp_list and call qla_update_host_map(); with d_id already zeroed it takes the btree_insert32() path and re-inserts the dying vport into host_map. Nothing cleans that entry afterwards, so once scsi_host_put() frees the vha a later host_map lookup dereferences freed memory. Skip a vport that has VPORT_DELETE set before taking the reference, so it is neither re-registered nor scheduled for DPC re-registration. This mirrors the existing guard in qla2x00_alert_all_vps().
Затронутые продукты
Ссылки
- CVE-2026-97531
- SUSE Bug 1283834
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size The VP control IOCB selects its target virtual port by setting one bit in vp_idx_map, a fixed 16-byte (128-bit) array in both vp_ctrl_entry_24xx and vp_ctrl_entry_24xx_ext. qla25xx_ctrlvp_iocb() computes map = (vp_index - 1) / 8 and writes vce->vp_idx_map[map] without checking that map stays within the array. max_npiv_vports is taken from firmware and only sanitized to a MIN_MULTI_ID_FABRIC-aligned boundary, so it can legitimately be 191 or 255, and qla24xx_control_vp() only rejects vp_index >= max_npiv_vports. A vp_index above 128 therefore yields map >= 16 and an out-of-bounds write of up to 16 bytes past vp_idx_map, corrupting the trailing IOCB fields (or the adjacent request-ring slot on the 64-byte layout). Reject a vp_index that cannot be represented in the IOCB bitmap in qla24xx_control_vp(), and add a defensive ARRAY_SIZE() guard in qla25xx_ctrlvp_iocb() before the write. Adapters that report the usual 63 or 127 NPIV vports are unaffected.
Затронутые продукты
Ссылки
- CVE-2026-97535
- SUSE Bug 1283837
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking qla25xx_free_req_que() and qla25xx_free_rsp_que() have two pre-existing bugs exposed on the error path of qla25xx_create_{req,rsp}_que(): 1. When dma_alloc_coherent() fails during queue creation, the error path calls the free function with req->ring / rsp->ring still NULL (from kzalloc). The unconditional dma_free_coherent() with a NULL cpu_addr is undefined behavior and can panic. 2. The free functions clear req_qid_map / rsp_qid_map under vport_lock, but the create functions protect the same bitmaps with mq_lock. This provides no mutual exclusion. Additionally, the create error path clears the bit and releases mq_lock before calling the free function, creating a window where another thread can allocate the same que_id and have its ha->req_q_map entry clobbered by the subsequent lockless NULL assignment in the free function. Fix by: - Guarding dma_free_coherent() with a NULL check on the ring pointer. - Using mq_lock (the lock held by all creators) in the free functions to atomically NULL the map entry and clear the bitmap bit. - Removing the now-redundant clear_bit blocks from the create error paths since the free functions handle it atomically.
Затронутые продукты
Ссылки
- CVE-2026-97537
- SUSE Bug 1283453
Описание
In the Linux kernel, the following vulnerability has been resolved: net: mpls: clear inner_protocol when the last label is popped skb_mpls_push() records the pre-encapsulation network header once, gated on !skb->inner_protocol. skb_mpls_pop() never clears that record, so it outlives the encapsulation it describes. Open vSwitch can then re-push MPLS onto a packet whose inner_network_header still points at the older, deeper offset: push a label, pop every label, recirculate (ovs_flow_key_update() re-derives key->eth.type and resets network_header, but leaves inner_*), then push again. ovs_fragment() trusts the record: skb->network_header = skb->inner_network_header; so skb_network_offset() goes negative. The bound check is signed: if (skb_network_offset(skb) > MAX_L2_LEN) a negative offset passes it, and prepare_frag() widens the value: unsigned int hlen = skb_network_offset(skb); memcpy(&data->l2_data, skb->data, hlen); which is a ~4GiB memcpy out of a 30-byte per-CPU buffer. Reproduced on v7.3-rc1. RDX is the truncated length, (unsigned int)(-8): BUG: unable to handle page fault for address: ffffe8ffffc16000 #PF: supervisor write access in kernel mode Oops: 0002 [#1] SMP KASAN NOPTI RIP: 0010:memcpy+0x8/0x20 RDX: 00000000fffffff8 RSI: ffff888105d732db RDI: ffffe8ffffc16000 prepare_frag+0x3df/0x4e0 ovs_fragment+0x589/0x7e0 do_output+0x4ce/0x5e0 do_execute_actions+0x55d2/0x7b30 ovs_execute_actions+0xea/0x450 Same root-cause shape as commit 975b5b067f52 ("ipv6: sr: restore network header before routing and forwarding"): a stale network header offset reaching a consumer that widens it. Here it originates in the MPLS push/pop path. Clear inner_protocol once the packet is no longer MPLS, so a later push re-records the current header. net/sched/act_mpls.c is the only other skb_mpls_pop() caller and gets the same fix; sch_frag.c saves and restores inner_protocol around fragmentation in the same way OVS does.
Затронутые продукты
Ссылки
- CVE-2026-97612
- SUSE Bug 1283967
- SUSE Bug 1283968
Описание
In the Linux kernel, the following vulnerability has been resolved: ufs: validate cylinder group metadata before caching it ufs_read_cylinder() copies the cylinder group index and the rotor positions straight from the on-disk group and caches them without any check: ucpi->c_cgx = fs32_to_cpu(sb, ucg->cg_cgx); ucpi->c_rotor = fs32_to_cpu(sb, ucg->cg_rotor); ucpi->c_frotor = fs32_to_cpu(sb, ucg->cg_frotor); ucpi->c_irotor = fs32_to_cpu(sb, ucg->cg_irotor); They are then used as indices during allocation and free: - c_cgx indexes the cylinder summary array as UFS_SB(sb)->fs_cs(ucpi->c_cgx), so a value past s_ncg writes a 32 bit count outside the s_csp allocation. - c_frotor becomes a bitmap scan start, start = c_frotor >> 3, and then length = ((s_fpg + 7) >> 3) - start. A start beyond the block bitmap wraps the unsigned length to a huge value, so ubh_scanc() walks far past the cylinder group buffers. c_irotor drives the inode bitmap the same way. A crafted image can set any of these freely, turning an ordinary allocation into an out of bounds access. Reject a cylinder group whose recorded index does not match the group being read, or whose rotors fall outside the group, before the metadata is cached. Valid filesystems keep cg_cgx equal to the group number and the rotors within the group, so only malformed images are rejected.
Затронутые продукты
Ссылки
- CVE-2026-97926
- SUSE Bug 1283887
Описание
In the Linux kernel, the following vulnerability has been resolved: net/rds: fix tcp stream corruption with large pages rds_message_map_pages() assigns PAGE_SIZE bytes to every scatterlist entry, even when total_len ends in a partial page. The RDS congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE greater than 8192 the scatterlist maps bytes beyond the end of the congestion map. RDS-TCP transmits the SG contents according to those lengths, so the extra bytes become part of the TCP RDS stream and are interpreted as subsequent RDS message headers, corrupting the stream. Limit the final scatterlist mapping to the number of bytes remaining. This has no effect on systems with a 4K page size and allows RDS-TCP to be used on systems with 16K and larger page sizes. The RDS selftest, which previously hung on 16K pages, now passes.
Затронутые продукты
Ссылки
- CVE-2026-97954
- SUSE Bug 1283113
Описание
In the Linux kernel, the following vulnerability has been resolved: vxlan: initialize _md in vxlan_xmit_one() If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and VXLAN_F_GBP, and a packet is transmitted through it using an external ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left pointing to the uninitialized _md stack variable: if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info->key.tun_flags)) { if (info->options_len < sizeof(*md)) goto drop; md = ip_tunnel_info_opts(info); } Because IP_TUNNEL_VXLAN_OPT_BIT is not set, md is not updated and remains pointing to _md. Later, vxlan_build_skb() is called with md, which eventually calls vxlan_build_gbp_hdr(): if (vxflags & VXLAN_F_GBP) vxlan_build_gbp_hdr(vxh, md); Inside vxlan_build_gbp_hdr(), md->gbp is read: if (!md->gbp) return; gbp = (struct vxlanhdr_gbp *)vxh; ... if (md->gbp & VXLAN_GBP_DONT_LEARN) gbp->dont_learn = 1; If the stack contains garbage, this causes: 1) VXLAN_HF_GBP flag to be spuriously set in the VXLAN header. 2) gbp->dont_learn and gbp->policy_applied to be set from stack bits. 3) gbp->policy_id to receive 16 bits of uninitialized kernel stack data, leaking it onto the wire. Fix this by zero-initializing _md. If IP_TUNNEL_VXLAN_OPT_BIT is not present, md->gbp remains 0, and vxlan_build_gbp_hdr() returns early without modifying the VXLAN header.
Затронутые продукты
Ссылки
- CVE-2026-97965
- SUSE Bug 1282963
Описание
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch, prevent mc_list repopulation during vport disable In mlx5_esw_vport_disable(), move esw_apply_vport_rx_mode() ahead of esw_vport_change_handle_locked() so vport->allmulti_rule is NULL before the change handler observes it. During FW-fatal recovery the disable runs while dev->state == INTERNAL_ERROR. The promisc query inside esw_update_vport_rx_mode() fails and returns early, leaving vport->allmulti_rule intact, so esw_update_vport_mc_promisc() runs and adds MLX5_ACTION_ADD entries to vport->mc_list whose flow rules are then installed in the FDB by esw_add_mc_addr(). esw_destroy_legacy_table() tears down the FDB with those refs still held, corrupting the sub-tree and leaving dangling flow_rule pointers in vport->mc_list. Two-stage failure on `echo 1 > /sys/bus/pci/devices/<bdf>/reset`: refcount_t: underflow; use-after-free. tree_put_node+0xef/0x110 [mlx5_core] clean_tree+0x44/0xd0 [mlx5_core] (x5) mlx5_fs_core_cleanup+0x57/0x1c0 [mlx5_core] mlx5_unload+0x65/0xd0 [mlx5_core] ... mlx5_health_try_recover BUG: unable to handle page fault for address: 0000000003000055 down_write+0x1c/0x60 mlx5_del_flow_rules+0x33/0x1f0 [mlx5_core] esw_del_mc_addr+0x7b/0x170 [mlx5_core] esw_apply_vport_addr_list+0x56/0xf0 [mlx5_core] esw_vport_change_handle_locked+0x28b/0x310 [mlx5_core] mlx5_esw_vport_enable+0x270/0x4a0 [mlx5_core] ... mlx5_load ... mlx5_health_try_recover esw_apply_vport_rx_mode(false, false) clears vport->allmulti_rule via its local state machine even when the FW del fails. With the rule NULL the !IS_ERR_OR_NULL(allmulti_rule) gate in the change handler closes, no rules are installed during disable, and the reload starts with a clean mc_list.
Затронутые продукты
Ссылки
- CVE-2026-98014
- SUSE Bug 1283668
- SUSE Bug 1283670
Описание
In the Linux kernel, the following vulnerability has been resolved: net: cap tx_queue_len at S16_MAX to prevent oversized ring allocations Several subsystems allocate ring buffers sized by dev->tx_queue_len with no upper bound. An unprivileged user (via unshare -Urn) can set a huge tx_queue_len and exhaust global memory with ring allocations: - pfifo_fast: pfifo_fast_init() and pfifo_fast_change_tx_queue_len() allocate 3 skb_array rings of tx_queue_len entries each. - tun: tun_queue_resize() and the queue-attach path resize ptr_rings to tx_queue_len on the NETDEV_CHANGE_TX_QUEUE_LEN notifier. - tap (macvtap/ipvtap): tap_queue_resize() and tap_init() resize/init ptr_rings to tx_queue_len on the same notifier. netif_change_tx_queue_len() is the single entry point for IFLA_TXQLEN, sysfs, and the SIOCSIFTXQLEN ioctl. Cap new_len at S16_MAX (32767) there so the oversized value is rejected at set time. This takes effect whether the device is up or down, before dev->tx_queue_len is written, before any notifier fires, and before any ring is allocated. The "> S16_MAX" check also subsumes the previous unsigned-long truncation test, and a negative ifr_qlen from the ioctl lands far above the cap after conversion, so both old failure modes are covered by the one comparison. tx_queue_len is ambigious: both a per-ring sizing multiplier and a default queue-length/limit knob for consumers that allocate nothing at set time (pfifo/bfifo/gred/plug/sfb limits, htb direct_qlen, qfq max_classes, teql). 32767 is chosen as the largest value NLA_POLICY_FULL_RANGE can express for the u32 IFLA_TXQLEN policy in patch 2/3 while staying a legitimate queue length on high-BDP paths; the ring-memory trade-off of a shared knob is disclosed below. Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y. - Unprivileged user in a fresh user+net namespace (unshare -Urn). - pfifo_fast: create veth pairs, set tx_queue_len to 500000, attach mq+pfifo_fast. ~28 iterations OOMs a 2GB guest. - tun: create 50 tun devices with IFF_MULTI_QUEUE, set tx_queue_len to 500000, open 8 queues each. ~1.6GB of ptr_ring allocations OOMs a 512MB guest. - tap: same as tun with IFF_TAP. ~960MB OOMs a 512MB guest. - On the fixed kernel the oversized tx_queue_len is rejected with -ERANGE at set time (all four paths: RTM_SETLINK, RTM_NEWLINK create, sysfs, ioctl - the latter two via this check, the former two via this check and the 2/3 parse policy respectively).
Затронутые продукты
Ссылки
- CVE-2026-98022
- SUSE Bug 1283810
Описание
In the Linux kernel, the following vulnerability has been resolved: net/rds: clear cp_flags bits individually in rds_conn_path_reset() rds_conn_path_reset() wipes the whole flag word with a plain cp->cp_flags = 0 store. Every other accessor of that word uses atomic bitops, and some of them can run concurrently with the reset: RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the transport completion paths, neither of which holds anything that excludes the shutdown worker. A plain store racing an atomic read-modify-write on the same word is a data race, and whichever side loses has its update silently discarded. Clear the two bits the reset is actually responsible for instead. RDS_IN_XMIT and RDS_RECV_REFILL need no store at all here: they belong to the caller, rds_conn_shutdown(), which waits for both to be clear before calling the transport shutdown and this reset. This also gives every bit in cp_flags a single well-defined writer discipline, which the following patches rely on when they turn RDS_IN_XMIT and RDS_RECV_REFILL into bit locks held across the teardown: a blanket store mid-teardown would destroy lock ownership that an atomic clear preserves. Oracle UEK carries the same conversion ("net/rds: Preserve essential connection state flags"), motivated by its asynchronous shutdown state machine, whose progress and destroy flags must survive the reset. UEK's variant also clears RDS_IN_XMIT and RDS_RECV_REFILL because there the reset runs as the final step of a teardown that owns both bits, making those clears its unlock. Upstream that release belongs in rds_conn_shutdown(): once a later patch in this series turns the two bits into locks held across the teardown, ending ownership needs release semantics and a wake-up that a plain clear inside the reset would not provide. Based on Oracle UEK commit "net/rds: Preserve essential connection state flags" by Gerd Rausch.
Затронутые продукты
Ссылки
- CVE-2026-98071
- SUSE Bug 1283842
Описание
In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in release_in_xmit() release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then checks waitqueue_active() to decide whether anyone needs waking. clear_bit_unlock() is only a release operation: it orders the critical section before the bit clear, but does not order the subsequent plain load of the wait queue head after it. The waiter side does the mirror image - it adds itself to the wait queue and then tests the bit. That is the classic store-buffering pattern: the releasing CPU can read the wait queue as empty while the waiting CPU still reads the bit as set, so the sleeper is never woken. The waiters are rds_conn_shutdown() and rds_tcp_reset_callbacks(), both in uninterruptible wait_event() with no timeout. A lost wake-up strands the shutdown worker on its single-threaded workqueue until some other sender releases the bit again - and on a connection that is being torn down precisely because it failed, there may never be another sender. The barrier used to be there: release_in_xmit() did clear_bit() followed by smp_mb__after_atomic() until commit 1422f28826d2 ("rds: introduce acquire/release ordering in acquire/release_in_xmit()") folded both into clear_bit_unlock(), which strengthened the lock hand-off but silently dropped the full barrier the wake-up check depends on. The refill counterpart, release_refill() in net/rds/ib_recv.c, still carries its smp_mb__after_atomic() for exactly this reason. Use wq_has_sleeper(), which is waitqueue_active() preceded by the required full barrier.
Затронутые продукты
Ссылки
- CVE-2026-98072
- SUSE Bug 1283846
Описание
In the Linux kernel, the following vulnerability has been resolved: bonding: do not clear curr_active_slave prematurely when releasing all slaves When releasing all slaves during bond destruction (all == true), __bond_release_one() unconditionally clears bond->curr_active_slave to NULL in every iteration. If a backup slave is released before the active slave, bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(), which increments the active slave dev promiscuity counter and sets bond_info->primary_is_promisc = 1. Because bond->curr_active_slave was prematurely cleared to NULL when releasing the backup slave, the subsequent iteration releasing the active slave evaluates oldcurrent as NULL, so bond_change_active_slave(bond, NULL) is skipped. Consequently, bond_alb_handle_active_change() is never called to decrement the promiscuity counter, permanently leaking promiscuous mode on the physical device after bond teardown. When oldcurrent == slave, bond_change_active_slave(bond, NULL) already sets bond->curr_active_slave to NULL. We only need to avoid selecting a new active slave when all == true. Replace the if (all) branch with if (!all && oldcurrent == slave).
Затронутые продукты
Ссылки
- CVE-2026-98074
- SUSE Bug 1283871
Описание
In the Linux kernel, the following vulnerability has been resolved: ipvs: fix reversed sequence option serialization hton_seq() expects the host-order source first and the unaligned network-order destination second. The version 1 sync sender passes these arguments in reverse for both sequence blocks. This leaves 24 bytes of the kmalloc-backed message unwritten. It may disclose stale heap data and replace the live connection sequence state with values read from the buffer. Pass the connection sequence state as the source and the message payload as the destination for both blocks.
Затронутые продукты
Ссылки
- CVE-2026-98078
- SUSE Bug 1284150
Описание
In the Linux kernel, the following vulnerability has been resolved: af_packet: Don't cast tpacket_hdr.tp_len to int in tpacket_parse_header(). syzbot reported BUG() in sock_sendmsg_nosec(). [0] The problem is that tpacket_parse_header() casts user-provided tpacket_hdr.tp_len, which is u32, to int. If the length is larger than INT_MAX, the following condition in tpacket_parse_header() passes, if (unlikely(tp_len > size_max)) and any negative value can be returned to the caller, up to sock_sendmsg_nosec(). The repro set tpacket_hdr.tp_len to 0xfffffdef, which is cast to -EIOCBQUEUED (-529), triggering BUG() in sock_sendmsg_nosec(). *(uint64_t*)0x200000000008 = 0xfffffdef; ... syscall(__NR_write, /*fd=*/r[0], /*buf=*/0x200000000000ul, /*count=*/1ul); Let's define the local tp_len as u32 in tpacket_parse_header(). [0]: kernel BUG at net/socket.c:803! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 5628 Comm: syz-executor176 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026 RIP: 0010:sock_sendmsg_nosec+0x145/0x180 net/socket.c:803 Code: 06 67 48 0f b9 3a eb 95 e8 e8 3a 22 f8 48 89 df 4c 89 f6 4c 89 e2 4d 89 fb 2e e8 32 a5 5c 16 e9 51 ff ff ff e8 cc 3a 22 f8 90 <0f> 0b e8 c4 3a 22 f8 48 83 c3 18 48 89 d8 48 c1 e8 03 42 80 3c 28 RSP: 0018:ffffc90003aefb48 EFLAGS: 00010293 RAX: ffffffff89a578d4 RBX: ffff8880764c67c0 RCX: ffff88807fb23e80 RDX: 0000000000000000 RSI: 00000000fffffdef RDI: 00000000fffffdef RBP: 00000000fffffdef R08: ffffc90003aef747 R09: 1ffff9200075dee8 R10: dffffc0000000000 R11: fffff5200075dee9 R12: 0000000000000001 R13: dffffc0000000000 R14: ffffc90003aefbc0 R15: ffffffff8aac4310 FS: 000055559101b400(0000) GS:ffff888124ce0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000000210 CR3: 0000000073dca000 CR4: 00000000003526f0 Call Trace: <TASK> __sock_sendmsg net/socket.c:815 [inline] sock_write_iter+0x2de/0x3e0 net/socket.c:1266 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x612/0xba0 fs/read_write.c:687 ksys_write+0x150/0x270 fs/read_write.c:739 do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline] do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f173130ecb9 Code: c0 79 93 eb d5 48 8d 7c 1d 00 eb 99 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 d8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd67e44248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f173130ecb9 RDX: 0000000000000001 RSI: 0000200000000000 RDI: 0000000000000003 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd67e44388 R13: 0000000000000002 R14: 00002000000000c0 R15: 0000000000000002 </TASK>
Затронутые продукты
Ссылки
- CVE-2026-98095
- SUSE Bug 1283921
Описание
In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF snd_pcm_hw_params() and snd_pcm_hw_free() guard buffer reallocation with an mmap_count check performed under the PCM stream lock, but the lock is released long before the buffer is actually freed: snd_pcm_sync_stop(), constraint refinement and do_free_pages() all happen in between. snd_pcm_mmap_data(), on the other hand, takes no lock at all: it validates against the old buffer's state and dma_bytes, remaps its pages into the VMA, and only then increments mmap_count. A concurrent mmap() can therefore slip in between the check and the free. remap_pfn_range() installs writable PTEs for the old buffer's pages without taking page references, and the subsequent do_free_pages() returns those pages to the page allocator while the VMA still maps them. This leaves a stale, writable mapping of freed pages: a page-level use-after-free that can be leveraged for local privilege escalation. Make snd_pcm_mmap_data() participate in the buffer-access scheme introduced for hw_params/hw_free: acquire runtime->buffer_accessing before validating and remapping, and release it afterwards. Buffer reallocation already fails with -EBUSY while accessors are active, and the mmap side now fails with -EBUSY while a reallocation is in progress, so the validate/remap sequence and the check/free sequence can no longer interleave. A reproducer that turns this race into a stale writable mapping of the freed DMA buffer pages is available on request.
Затронутые продукты
Ссылки
- CVE-2026-98116
- SUSE Bug 1283878
Описание
In the Linux kernel, the following vulnerability has been resolved: ppp_async: drop the errored frame instead of resetting its headroom ppp_receive_nonmp_frame() prepends a two-byte direction tag before running the pass/active BPF filters: *(__be16 *)skb_push(skb, 2) = htons(PPP_FILTER_INBOUND_TAG); Nothing on the receive path guarantees those two bytes of headroom. The frame-error path in ppp_async's process_input_packet() resets a reused skb's headroom to zero while claiming to restore it to a freshly allocated state - but a fresh skb from dev_alloc_skb() carries NET_SKB_PAD: err: if (skb) { /* make skb appear as freshly allocated */ skb_trim(skb, 0); skb_reserve(skb, - skb_headroom(skb)); } ap->rpkt still points at that skb, so the next frame is reassembled into it with no headroom at all. A peer that sends a bad-FCS frame followed by one beginning ff 03 then leaves a single byte of headroom by the time the filter tag is pushed, which lands one byte below skb->head: skbuff: skb_under_panic: len:49 put:2 head:ffff888003c10000 data:ffff888003c0ffff tail:0x30 end:0x640 dev:<NULL> kernel BUG at net/core/skbuff.c:214! RIP: 0010:skb_panic+0x13e/0x230 Call Trace: skb_push+0xbd/0x100 ppp_receive_nonmp_frame+0x48a/0x1d10 ppp_input+0x4e9/0x2f80 ppp_async_process+0x2a/0xe0 tasklet_action_common+0x20f/0x8a0 handle_softirqs+0x18e/0x590 Kernel panic - not syncing: Fatal exception in interrupt Zeroing the headroom violates the NET_SKB_PAD guarantee that dev_alloc_skb() gives the rest of the receive path. Besides the filter panic above, when CCP compression is enabled ppp_decompress_frame() hands skb->data - 2 to ->decompress()/->incomp(), which then reads out of bounds before skb->head for the same reason. Rather than restore the headroom, drop the errored frame - as ppp_synctty already does on its error path - and clear ap->rpkt so the next frame is reassembled into a fresh skb with proper headroom. This is simpler and fixes both the filter under-panic and the CCP out-of-bounds read. The original V1 of this patch made room in ppp_receive_nonmp_frame() with skb_cow_head(); Eric pointed out that fixing the root cause in the transport is the right approach. Found by fuzzing the PPP receive path with a mutating peer on a pty; it is an interesting (remote) DoS: root configures PPP, the peer supplies two crashing frames. The reproducer (repro-ppp-skb.c, unchanged from v1) panics in about a second, and returns cleanly with this applied.
Затронутые продукты
Ссылки
- CVE-2026-98158
- SUSE Bug 1283933
Описание
In the Linux kernel, the following vulnerability has been resolved: rds: ib: use rds_conn_drop() on protocol version mismatch rds_ib_cm_connect_complete() runs from the RDMA-CM event handler with conn->c_cm_lock held. When the peer negotiates a protocol version older than RDS_PROTOCOL_COMPAT_VERSION, the handler calls rds_conn_destroy(), which is only safe in the rmmod path: it synchronously tears the connection down and flush_work()es the shutdown work cp_down_w. That shutdown work (rds_conn_shutdown()) needs cp_cm_lock, which is the very lock the event handler still holds, so the flush never completes: the two workers wait on each other and the RDS connection workqueues stall for good. All other RDMA-CM failure paths (REJECTED, CONNECT_ERROR, DISCONNECTED) use rds_conn_drop(), which marks the connection RDS_CONN_ERROR and schedules the shutdown work asynchronously. Use it here as well.
Затронутые продукты
Ссылки
- CVE-2026-98257
- SUSE Bug 1284346
Описание
In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba The commit b1af23d836f8 ("KVM: PPC: iommu: Unify TCE checking") unified IOBA parameter checking across KVM and VFIO into iommu_tce_check_ioba(). While doing so, the passed in argument npages is ignored and constant value '1' is used leaving out a possible overflow as the callers can legitimately be using npages > 1 for H_STUFF_TCE or H_PUT_TCE_INDIRECT cases. Fix this by accounting for 'npages', checking for arithmetic overflow, and verifying that the entire requested range (ioba - offset + npages) does not exceed the table capacity 'size'.
Затронутые продукты
Ссылки
- CVE-2026-98282
- SUSE Bug 1284360
- SUSE Bug 1284361
Описание
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot For QLAFX00 the request ring is ioremapped device I/O memory (ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest of the FX00 path accesses it through memcpy_toio() and the wrt_reg_* helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a plain memset(). On architectures such as ARM64 a regular memset() may emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are invalid on Device memory, leading to a synchronous external abort. Use memset_io() to clear the slot for QLAFX00, matching the I/O accessors used elsewhere on this ring. Other adapters keep the plain memset() on their DMA-coherent rings. The zero-fill is retained for FX00 because its IOCB builders (e.g. qlafx00_fxdisc_iocb()) copy only part of the entry and rely on the unused tail being pre-zeroed.
Затронутые продукты
Ссылки
- CVE-2026-98386
- SUSE Bug 1285668
Описание
In the Linux kernel, the following vulnerability has been resolved: ipv4: free inet_opt and ireq_opt after an RCU grace period tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the child socket (newinet->inet_opt) without copying it. Another cpu can concurrently process a retransmitted SYN for the same request socket, and send a SYNACK from tcp_check_req(). tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt under rcu_read_lock() only, and ip_build_and_send_pkt() and ip_options_build() then read opt->optlen twice. Note that the SYNACK timer itself is not an issue: it holds a reference on its request socket, and inet_csk_reqsk_queue_drop() calls timer_delete_sync() before the child can be freed. Since commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table"), request sockets are processed without holding the listener lock, so nothing prevents the child socket from being freed while the SYNACK is still being built. TCP child sockets do not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt with a plain kfree(), leading to a use-after-free in ip_options_build(). A similar issue exists with request socket migration (net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE program). reqsk_timer_handler() clones the request socket with inet_reqsk_clone(), so that the old request socket and its clone share the same ireq_opt, then reqsk_migrate_reset() clears the pointer in the old one. Another cpu holding a reference on the old request socket can still be using these options (sending a SYNACK, or creating a child in tcp_v4_syn_recv_sock()) when the clone is freed, and tcp_v4_reqsk_destructor() also uses a plain kfree(). Readers already use RCU, and other paths replacing inet_opt (do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and tcp_v4_reqsk_destructor() as well. IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock() duplicates the options. tcp_v6_reqsk_destructor() has the same migration issue with ipv6_opt, which is only set by CALIPSO. This will be addressed in a separate patch.
Затронутые продукты
Ссылки
- CVE-2026-98432
- SUSE Bug 1285685
- SUSE Bug 1285686
- SUSE Bug 1288904
- SUSE Bug 1288918
- SUSE Bug 1289140
- SUSE Bug 1289141
- SUSE Bug 1289274
Описание
In the Linux kernel, the following vulnerability has been resolved: vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF The reload of 'vc' added by commit 8fb9ea65c9d1 ("vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF") sits after the 'if (ret)' block, so the copy-failure break path exits the loop without reloading vc. If the vc was kfree()'d via vc_port_destruct during the unlocked copy_from_user() window, the post-loop 'if (written && vc) vcs_scr_updated(vc)' is reached with a stale non-NULL vc. The '&& vc' guard from commit a287620312dc ("vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write") only handles the NULL case, not this stale-non-NULL case; vcs_notifier() then reads param->vc->vc_num from freed memory: BUG: KASAN: slab-use-after-free in vcs_notifier+0x7c/0xd0 Read of size 2 at addr ffff888007149190 Call Trace: vcs_notifier+0x7c/0xd0 atomic_notifier_call_chain+0x70/0xa0 vcs_scr_updated+0x77/0xa0 vcs_write+0x71b/0x7e0 Allocated by task: vc_allocate -> con_install -> tty_open Freed by task: kfree <- vt_ioctl (VT_DISALLOCATE -> vc_port_destruct) Move the reload to immediately after console_lock(), before 'if (ret)', so every break path below passes a fresh vc to the post-loop vcs_scr_updated().
Затронутые продукты
Ссылки
- CVE-2026-98840
- SUSE Bug 1286458