openSUSE-SU-2018:0109-1

Описание

This update for syncthing brings a new version and fixes the following issues:

• Update to version 0.14.42:

  • Discovering new files in a deleted directory does not resurrect the directory (gh#syncthing/syncthing#4475).
  • 'Panic: interface conversion: *errors.errorString is not net.Error' after restart (gh#syncthing/syncthing#4561).
  • Auto-accept shared directories from trusted devices (gh#syncthing/syncthing#2299).
  • Empty directories in .stversions should be removed (gh#syncthing/syncthing#4406).
  • Human readable errors on attempted deletion of a non-empty directory (gh#syncthing/syncthing#4476).
  • Add confirmation on the Remove Folder / Device button (gh#syncthing/syncthing#4543).

• Update to version 0.14.41:

  • Devices with ignored files stay 'synchronising' forever (gh#syncthing/syncthing#623).
  • No Global Discovery without Synch Protocol Listen Address (gh#syncthing/syncthing#4418).
  • Local network classification doesn't always work (gh#syncthing/syncthing#4421).
  • Hashed GUI password should not be rehashed (gh#syncthing/syncthing#4458).
  • Pulls not triggered correctly on reconnection (gh#syncthing/syncthing#4504).
  • A symlink/file replacement doesn't work properly (gh#syncthing/syncthing#4505).
  • File/directory replacement doesn't work properly (gh#syncthing/syncthing#4506).
  • Logging at info level and above should always include context (gh#syncthing/syncthing#4510).
  • Panic in 'pfilter' package on 32 bit architectures (gh#syncthing/syncthing#4537).
  • Allow synchronising read-only directories as 'Master Directories' (gh#syncthing/syncthing#1126).
  • 'Global Changes' button is confusing, retitle to 'Recent Changes' (gh#syncthing/syncthing#4326).
  • Dial device addresses in parallel (gh#syncthing/syncthing#4456).
  • Avoid lots and lots of announced addresses in the presence of symmetric NAT (gh#syncthing/syncthing#4519).
  • Split transport usage reporting per stack (gh#syncthing/syncthing#4463).

• Update to version 0.14.40:

  • Report more data part of the anonymous usage report (gh#syncthing/syncthing#3628)
  • Better report synchronisation errors (gh#syncthing/syncthing#4392).
  • Removing paused directories no longer causes a panic (gh#syncthing/syncthing#4405).
  • Make local IPv4 discovery more resilient against write failures (gh#syncthing/syncthing#4414).
  • Clearer logging around config failures at startup (gh#syncthing/syncthing#4431).
  • Do not complain about inability to fsync files (gh#syncthing/syncthing#4432).
  • Improve KCP connections (gh#syncthing/syncthing#4446).
  • Improve directory health checking (gh#syncthing/syncthing#4451).
  • Include built-in support for file system notifications, although it is disabled by default.
  • Enable by default the UDP based 'KCP' protocol.

• Update to version 0.14.39:

  • Removing paused directories no longer triggers a crash (gh#syncthing/syncthing#4357).
  • Add further security related HTTP headers (gh#syncthing/syncthing#4360).
  • Improve info level logging in some cases (gh#syncthing/syncthing#4375).
  • Improve GUI tooltips in chromium based browsers (gh#syncthing/syncthing#4377).
  • Add -device-id command line switch (gh#syncthing/syncthing#4387).
  • Failure to upgrade directory markers from file to directory type is no longer fatal.

• Update to version 0.14.38:

  • KCP connections are now more stable (gh#syncthing/syncthing#4063, gh#syncthing/syncthing#4343)
  • Hashing benchmarks are skipped if a manual selection has been forced (gh#syncthing/syncthing#4348).
  • Relay server RAM usage has been reduced (gh#syncthing/syncthing#4245).

• Update to version 0.14.37 (changes since 0.14.32):

  • Relative version paths are now correctly relative to the directory path (gh#syncthing/syncthing#4188).
  • Remote devices now show bytes remaining to synchronise (gh#syncthing/syncthing#4227).
  • Editing ignore patterns no longer incorrectly shows included patterns (gh#syncthing/syncthing#4249).
  • The new directory dialogue now suggests a default path. Adjustable via advanced config defaultFolderPath (gh#syncthing/syncthing#2157).
  • The build script no longer sets -installsuffix by default (gh#syncthing/syncthing#4272).
  • Prevent a vulnerability that allows file overwrite via versioned symlinks (CVE-2017-1000420, boo#1074428, gh#syncthing/syncthing#4286).
  • Symlinks are deleted from versioned directories on startup (gh#syncthing/syncthing#4288).
  • Directory paths are no longer reset when editing a directory without a label (gh#syncthing/syncthing#4297).
  • Better detect synchronisation conflicts that happen while synchronising (gh#syncthing/syncthing#3742, gh#syncthing/syncthing#4305).
  • Fix a crash related to a nil reference in ignore handling (gh#syncthing/syncthing#4300).

• Stop requiring golang.org/x/net/context.

• Update to version 0.14.32:

  • 'Nearby devices' are now shown in the add device dialogue, avoiding the need to type their device ID (gh#syncthing/syncthing#4157).
  • Directories that were once ignored in a sharing request now actually work properly when later added manually (gh#syncthing/syncthing#4219).

• Update to version 0.14.31 (changes since 0.14.29):

  • Correctly clear warning 'path is a subdirectory of other folder' in directory dialogue (gh#syncthing/syncthing#3433).
  • Conflict copies filename now includes the ID of the last device to change the file (gh#syncthing/syncthing#3524).
  • Directories offered by other devices can now be ignored (gh#syncthing/syncthing#3993).
  • Changed device name takes effect with restart; device name is not sent to unknown devices (gh#syncthing/syncthing#4164).
  • Correctly show CPU usage when started with -no-restart option (gh#syncthing/syncthing#4183).
  • Icons and directory information in local device summary is consistent with that in directories (gh#syncthing/syncthing#4100).
  • Fix a data race in KCP & STUN (gh#syncthing/syncthing#4177).
  • Ignore patterns on newly accepted directories are no longer erroneously inherited from an earlier added directory (gh#syncthing/syncthing#4203).

• Update to version 0.14.29:

  • The layout of the global changes dialogue is improved (gh#syncthing/syncthing#3895).
  • Running as root or SYSTEM now triggers a warning recommending against it (gh#syncthing/syncthing#4123).
  • Changing the theme no longer causes an HTTP error (gh#syncthing/syncthing#4127).

• Update to version 0.14.28:

  • It is now possible to create custom event subscriptions via the REST API (gh#syncthing/syncthing#1879).
  • Removing large directories now uses less memory (gh#syncthing/syncthing#2250).
  • The minimum disc space (per directory and for the home drive) can now be set to an absolute value (gh#syncthing/syncthing#3307).
  • Pausing or reconfiguring a directory will no longer start extra scans. Pausing a directory stops scanning (gh#syncthing/syncthing#3965).
  • Ignore patterns can now be set at directory creation time, and for paused directories (gh#syncthing/syncthing#3996).
  • It is no longer possible to configure the GUI/API to listen on a privileged port using the standard settings dialogue (gh#syncthing/syncthing#4020).
  • The device allowed subnet list can now include negative ('!') entries to disallow subnets (gh#syncthing/syncthing#4096).
  • Doing 'Override changes' now uses less memory (gh#syncthing/syncthing#4112).

• Require golang.org/x/net/context on openSUSE older than openSUSE Leap 15.x.

• Update to version 0.14.27:

  • Devices can now have a list of allowed subnets (advanced config) (gh#syncthing/syncthing#219).
  • The transfer rate units can now be changed by clicking on the value (gh#syncthing/syncthing#234).
  • UI text explaining 'Introducer' is improved (gh#syncthing/syncthing#1819).
  • Advanced config editor can now edit lists of things (gh#syncthing/syncthing#2267).
  • Directories created for new directories now obey the user umask setting (gh#syncthing/syncthing#2519).
  • Incoming index updates are consistency checked better (gh#syncthing/syncthing#4053).

• Update to version 0.14.26:

  • Discovery errors are more clearly displayed in the GUI (gh#syncthing/syncthing#2344).
  • The language dropdown menu in the GUI is now correctly sorted (gh#syncthing/syncthing#3913).
  • When there are items that could not be synced, their full path is displayed in the GUI.

• Update to version 0.14.25:

  • Improve 'Pause All'/'Resume All' icons (gh#syncthing/syncthing#4003).
  • There are now mips and mipsle builds by default (gh#syncthing/syncthing#3959).
  • The 'overwriting protected files' warning now correctly handles relative paths to the config directory (gh#syncthing/syncthing#3183).
  • The experimental KCP protocol for transfers over UDP has been merged, although it's not currently enabled by default (gh#syncthing/syncthing#804).

• Update to version 0.14.24:

  • lib/sync: Fix a race in unlocker logging (gh#syncthing/syncthing#3884).
  • Make links and log messages refer to https instead of http where possible (gh#syncthing/syncthing#3976).
  • The default number of parallel file processing routines per directory is now two (previously one), and the number of simultaneously outstanding network requests has been increased.
  • The UI now contains buttons to pause or resume all directories with a single action.

• Update to version 0.14.23 (changes since 0.14.21):

  • Leading and trailing spaces are no longer stripped in the GUI password field (gh#syncthing/syncthing#3935)
  • The GUI shows remaining amount of data to sync per directory (gh#syncthing/syncthing#3908).
  • There should no longer be empty entries in the global log (gh#syncthing/syncthing#3933).
  • Weak hashing is now by default only enabled when it makes sense from a performance point of view (gh#syncthing/syncthing#3938).

• Update to version 0.14.21 (changes since 0.14.19):

  • There is now a warning when adding a directory that is a parent of an existing directory (gh#syncthing/syncthing#3197).
  • Using -logfile flag together with -no-restart now causes an error instead of silently failing (gh#syncthing/syncthing#3912).
  • Weak hashing is now disabled completely when the threshold percentage is > 100 (gh#syncthing/syncthing#3891).
  • Rate limiting now actually works on ARM64 builds again (gh#syncthing/syncthing#3921).
  • Fix an issue where UPnP port allocations would be incorrect under some circumstances (gh#syncthing/syncthing#3924).
  • Weak hashing is a bit faster and allocates less memory.
  • The hashing performance reported at startup now includes weak hashing.
  • The GUI 'network error' dialogue no longer shows up as easily in some scenarios when using Syncthing behind a reverse proxy.

• Update to version 0.14.19:

  • Changing bandwidth rate limits now takes effect immediately without restart (gh#syncthing/syncthing#3846)
  • The event log (-audit) can now be directed to stderr for piping into an another application (gh#syncthing/syncthing#3859).
  • A panic on directory listing at startup has been fixed (gh#syncthing/syncthing#3584).
  • When a directory is deleted, the .stfolder marker is also removed. The ignore file and .stversions directory are retained, if present (gh#syncthing/syncthing#3857).
  • Several scenarios where a device would get stuck with 'not a directory' errors are now handled again (gh#syncthing/syncthing#3819).
  • Third party copyrights in the about box are now more up to date (gh#syncthing/syncthing#3839).
  • Hashing performance has been improved (gh#syncthing/syncthing#3861)

• Update to version 0.14.18:

  • Fix connections to older Syncthing versions being no longer closed due to an unmarshalling message: 'proto: wrong wireType = 2 for field BlockIndexes' (gh#syncthing/syncthing#3855).

• Update to version 0.14.17:

  • Panics caused by corrupt on disc database are now better explained in the panic message (gh#syncthing/syncthing#3689).
  • Statically configured device addresses without port number now correctly defaulted to port 22000 again (gh#syncthing/syncthing#3817).
  • Inotify clients no longer cause 'invalid subpath' errors to be displayed (gh#syncthing/syncthing#3829).
  • Directories can now be paused (gh#syncthing/syncthing#215).
  • 'Master' directories are now called 'send only' in order to standardise on a terminology of sending and receiving changes (gh#syncthing/syncthing#2679).
  • Pausing devices and directories now persists across restarts (gh#syncthing/syncthing#3407).
  • A rolling checksum is used to identify and reuse blocks that have moved within a file (gh#syncthing/syncthing#3527).
  • Syncthing allows setting the type-of-service field on outgoing packets, configured by the advanced setting 'trafficClass' (gh#syncthing/syncthing#3790).
  • Which device introduced another device is now visible in the GUI (gh#syncthing/syncthing#3809).