openSUSE-SU-2026:20416-1

Описание

In the Linux kernel, the following vulnerability has been resolved: gfs2: Set .migrate_folio in gfs2_{rgrp,meta}_aops Clears up the warning added in 7ee3647243e5 ("migrate: Remove call to ->writepage") that occurs in various xfstests, causing "something found in dmesg" failures. [ 341.136573] gfs2_meta_aops does not implement migrate_folio [ 341.136953] WARNING: CPU: 1 PID: 36 at mm/migrate.c:944 move_to_new_folio+0x2f8/0x300

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-39753.html
  CVE-2025-39753
• https://bugzilla.suse.com/1249590
  SUSE Bug 1249590

Описание

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg Issuing two writes to the same af_alg socket is bogus as the data will be interleaved in an unpredictable fashion. Furthermore, concurrent writes may create inconsistencies in the internal socket state. Disallow this by adding a new ctx->write field that indiciates exclusive ownership for writing.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-39964.html
  CVE-2025-39964
• https://bugzilla.suse.com/1251966
  SUSE Bug 1251966

Описание

In the Linux kernel, the following vulnerability has been resolved: cifs: parse_dfs_referrals: prevent oob on malformed input Malicious SMB server can send invalid reply to FSCTL_DFS_GET_REFERRALS - reply smaller than sizeof(struct get_dfs_referral_rsp) - reply with number of referrals smaller than NumberOfReferrals in the header Processing of such replies will cause oob. Return -EINVAL error on such replies to prevent oob-s.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-40099.html
  CVE-2025-40099
• https://bugzilla.suse.com/1252911
  SUSE Bug 1252911

Описание

In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix refcount leak for cifs_sb_tlink Fix three refcount inconsistency issues related to `cifs_sb_tlink`. Comments for `cifs_sb_tlink` state that `cifs_put_tlink()` needs to be called after successful calls to `cifs_sb_tlink()`. Three calls fail to update refcount accordingly, leading to possible resource leaks.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-40103.html
  CVE-2025-40103
• https://bugzilla.suse.com/1252924
  SUSE Bug 1252924

Описание

In the Linux kernel, the following vulnerability has been resolved: mm: prevent poison consumption when splitting THP When performing memory error injection on a THP (Transparent Huge Page) mapped to userspace on an x86 server, the kernel panics with the following trace. The expected behavior is to terminate the affected process instead of panicking the kernel, as the x86 Machine Check code can recover from an in-userspace #MC. mce: [Hardware Error]: CPU 0: Machine Check Exception: f Bank 3: bd80000000070134 mce: [Hardware Error]: RIP 10:<ffffffff8372f8bc> {memchr_inv+0x4c/0xf0} mce: [Hardware Error]: TSC afff7bbff88a ADDR 1d301b000 MISC 80 PPIN 1e741e77539027db mce: [Hardware Error]: PROCESSOR 0:d06d0 TIME 1758093249 SOCKET 0 APIC 0 microcode 80000320 mce: [Hardware Error]: Run the above through 'mcelog --ascii' mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel Kernel panic - not syncing: Fatal local machine check The root cause of this panic is that handling a memory failure triggered by an in-userspace #MC necessitates splitting the THP. The splitting process employs a mechanism, implemented in try_to_map_unused_to_zeropage(), which reads the pages in the THP to identify zero-filled pages. However, reading the pages in the THP results in a second in-kernel #MC, occurring before the initial memory_failure() completes, ultimately leading to a kernel panic. See the kernel panic call trace on the two #MCs. First Machine Check occurs // [1] memory_failure() // [2] try_to_split_thp_page() split_huge_page() split_huge_page_to_list_to_order() __folio_split() // [3] remap_page() remove_migration_ptes() remove_migration_pte() try_to_map_unused_to_zeropage() // [4] memchr_inv() // [5] Second Machine Check occurs // [6] Kernel panic [1] Triggered by accessing a hardware-poisoned THP in userspace, which is typically recoverable by terminating the affected process. [2] Call folio_set_has_hwpoisoned() before try_to_split_thp_page(). [3] Pass the RMP_USE_SHARED_ZEROPAGE remap flag to remap_page(). [4] Try to map the unused THP to zeropage. [5] Re-access pages in the hw-poisoned THP in the kernel. [6] Triggered in-kernel, leading to a panic kernel. In Step[2], memory_failure() sets the poisoned flag on the page in the THP by TestSetPageHWPoison() before calling try_to_split_thp_page(). As suggested by David Hildenbrand, fix this panic by not accessing to the poisoned page in the THP during zeropage identification, while continuing to scan unaffected pages in the THP for possible zeropage mapping. This prevents a second in-kernel #MC that would cause kernel panic in Step[4]. Thanks to Andrew Zaborowski for his initial work on fixing this issue.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-40230.html
  CVE-2025-40230
• https://bugzilla.suse.com/1254817
  SUSE Bug 1254817

Описание

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix softlockup in ftrace_module_enable A soft lockup was observed when loading amdgpu module. If a module has a lot of tracable functions, multiple calls to kallsyms_lookup can spend too much time in RCU critical section and with disabled preemption, causing kernel panic. This is the same issue that was fixed in commit d0b24b4e91fc ("ftrace: Prevent RCU stall on PREEMPT_VOLUNTARY kernels") and commit 42ea22e754ba ("ftrace: Add cond_resched() to ftrace_graph_set_hash()"). Fix it the same way by adding cond_resched() in ftrace_module_enable.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-68173.html
  CVE-2025-68173
• https://bugzilla.suse.com/1255311
  SUSE Bug 1255311

Описание

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up The function ring_buffer_map_get_reader() is a bit more strict than the other get reader functions, and except for certain situations the rb_get_reader_page() should not return NULL. If it does, it triggers a warning. This warning was triggering but after looking at why, it was because another acceptable situation was happening and it wasn't checked for. If the reader catches up to the writer and there's still data to be read on the reader page, then the rb_get_reader_page() will return NULL as there's no new page to get. In this situation, the reader page should not be updated and no warning should trigger.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-68186.html
  CVE-2025-68186
• https://bugzilla.suse.com/1255144
  SUSE Bug 1255144

Описание

In the Linux kernel, the following vulnerability has been resolved: mm/memfd: fix information leak in hugetlb folios When allocating hugetlb folios for memfd, three initialization steps are missing: 1. Folios are not zeroed, leading to kernel memory disclosure to userspace 2. Folios are not marked uptodate before adding to page cache 3. hugetlb_fault_mutex is not taken before hugetlb_add_to_page_cache() The memfd allocation path bypasses the normal page fault handler (hugetlb_no_page) which would handle all of these initialization steps. This is problematic especially for udmabuf use cases where folios are pinned and directly accessed by userspace via DMA. Fix by matching the initialization pattern used in hugetlb_no_page(): - Zero the folio using folio_zero_user() which is optimized for huge pages - Mark it uptodate with folio_mark_uptodate() - Take hugetlb_fault_mutex before adding to page cache to prevent races The folio_zero_user() change also fixes a potential security issue where uninitialized kernel memory could be disclosed to userspace through read() or mmap() operations on the memfd.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-68292.html
  CVE-2025-68292
• https://bugzilla.suse.com/1255148
  SUSE Bug 1255148

Описание

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix memory leak in cifs_construct_tcon() When having a multiuser mount with domain= specified and using cifscreds, cifs_set_cifscreds() will end up setting @ctx->domainname, so it needs to be freed before leaving cifs_construct_tcon(). This fixes the following memory leak reported by kmemleak: mount.cifs //srv/share /mnt -o domain=ZELDA,multiuser,... su - testuser cifscreds add -d ZELDA -u testuser ... ls /mnt/1 ... umount /mnt echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8881203c3f08 (size 8): comm "ls", pid 5060, jiffies 4307222943 hex dump (first 8 bytes): 5a 45 4c 44 41 00 cc cc ZELDA... backtrace (crc d109a8cf): __kmalloc_node_track_caller_noprof+0x572/0x710 kstrdup+0x3a/0x70 cifs_sb_tlink+0x1209/0x1770 [cifs] cifs_get_fattr+0xe1/0xf50 [cifs] cifs_get_inode_info+0xb5/0x240 [cifs] cifs_revalidate_dentry_attr+0x2d1/0x470 [cifs] cifs_getattr+0x28e/0x450 [cifs] vfs_getattr_nosec+0x126/0x180 vfs_statx+0xf6/0x220 do_statx+0xab/0x110 __x64_sys_statx+0xd5/0x130 do_syscall_64+0xbb/0x380 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-68295.html
  CVE-2025-68295
• https://bugzilla.suse.com/1255129
  SUSE Bug 1255129

Описание

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix WARN_ON in tracing_buffers_mmap_close for split VMAs When a VMA is split (e.g., by partial munmap or MAP_FIXED), the kernel calls vm_ops->close on each portion. For trace buffer mappings, this results in ring_buffer_unmap() being called multiple times while ring_buffer_map() was only called once. This causes ring_buffer_unmap() to return -ENODEV on subsequent calls because user_mapped is already 0, triggering a WARN_ON. Trace buffer mappings cannot support partial mappings because the ring buffer structure requires the complete buffer including the meta page. Fix this by adding a may_split callback that returns -EINVAL to prevent VMA splits entirely.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-68329.html
  CVE-2025-68329
• https://bugzilla.suse.com/1255490
  SUSE Bug 1255490

Описание

In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix device resources accessed after device removal Correct possible race conditions during device removal. Previously, a scheduled work item to reset a LUN could still execute after the device was removed, leading to use-after-free and other resource access issues. This race condition occurs because the abort handler may schedule a LUN reset concurrently with device removal via sdev_destroy(), leading to use-after-free and improper access to freed resources. - Check in the device reset handler if the device is still present in the controller's SCSI device list before running; if not, the reset is skipped. - Cancel any pending TMF work that has not started in sdev_destroy(). - Ensure device freeing in sdev_destroy() is done while holding the LUN reset mutex to avoid races with ongoing resets.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-68371.html
  CVE-2025-68371
• https://bugzilla.suse.com/1255572
  SUSE Bug 1255572

Описание

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Clear cmds after chip reset Commit aefed3e5548f ("scsi: qla2xxx: target: Fix offline port handling and host reset handling") caused two problems: 1. Commands sent to FW, after chip reset got stuck and never freed as FW is not going to respond to them anymore. 2. BUG_ON(cmd->sg_mapped) in qlt_free_cmd(). Commit 26f9ce53817a ("scsi: qla2xxx: Fix missed DMA unmap for aborted commands") attempted to fix this, but introduced another bug under different circumstances when two different CPUs were racing to call qlt_unmap_sg() at the same time: BUG_ON(!valid_dma_direction(dir)) in dma_unmap_sg_attrs(). So revert "scsi: qla2xxx: Fix missed DMA unmap for aborted commands" and partially revert "scsi: qla2xxx: target: Fix offline port handling and host reset handling" at __qla2x00_abort_all_cmds.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-68745.html
  CVE-2025-68745
• https://bugzilla.suse.com/1255721
  SUSE Bug 1255721

Описание

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix middle attribute validation in push_nsh() action The push_nsh() action structure looks like this: OVS_ACTION_ATTR_PUSH_NSH(OVS_KEY_ATTR_NSH(OVS_NSH_KEY_ATTR_BASE,...)) The outermost OVS_ACTION_ATTR_PUSH_NSH attribute is OK'ed by the nla_for_each_nested() inside __ovs_nla_copy_actions(). The innermost OVS_NSH_KEY_ATTR_BASE/MD1/MD2 are OK'ed by the nla_for_each_nested() inside nsh_key_put_from_nlattr(). But nothing checks if the attribute in the middle is OK. We don't even check that this attribute is the OVS_KEY_ATTR_NSH. We just do a double unwrap with a pair of nla_data() calls - first time directly while calling validate_push_nsh() and the second time as part of the nla_for_each_nested() macro, which isn't safe, potentially causing invalid memory access if the size of this attribute is incorrect. The failure may not be noticed during validation due to larger netlink buffer, but cause trouble later during action execution where the buffer is allocated exactly to the size: BUG: KASAN: slab-out-of-bounds in nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch] Read of size 184 at addr ffff88816459a634 by task a.out/22624 CPU: 8 UID: 0 PID: 22624 6.18.0-rc7+ #115 PREEMPT(voluntary) Call Trace: <TASK> dump_stack_lvl+0x51/0x70 print_address_description.constprop.0+0x2c/0x390 kasan_report+0xdd/0x110 kasan_check_range+0x35/0x1b0 __asan_memcpy+0x20/0x60 nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch] push_nsh+0x82/0x120 [openvswitch] do_execute_actions+0x1405/0x2840 [openvswitch] ovs_execute_actions+0xd5/0x3b0 [openvswitch] ovs_packet_cmd_execute+0x949/0xdb0 [openvswitch] genl_family_rcv_msg_doit+0x1d6/0x2b0 genl_family_rcv_msg+0x336/0x580 genl_rcv_msg+0x9f/0x130 netlink_rcv_skb+0x11f/0x370 genl_rcv+0x24/0x40 netlink_unicast+0x73e/0xaa0 netlink_sendmsg+0x744/0xbf0 __sys_sendto+0x3d6/0x450 do_syscall_64+0x79/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Let's add some checks that the attribute is properly sized and it's the only one attribute inside the action. Technically, there is no real reason for OVS_KEY_ATTR_NSH to be there, as we know that we're pushing an NSH header already, it just creates extra nesting, but that's how uAPI works today. So, keeping as it is.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-68785.html
  CVE-2025-68785
• https://bugzilla.suse.com/1256640
  SUSE Bug 1256640

Описание

In the Linux kernel, the following vulnerability has been resolved: KVM: Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot Reject attempts to disable KVM_MEM_GUEST_MEMFD on a memslot that was initially created with a guest_memfd binding, as KVM doesn't support toggling KVM_MEM_GUEST_MEMFD on existing memslots. KVM prevents enabling KVM_MEM_GUEST_MEMFD, but doesn't prevent clearing the flag. Failure to reject the new memslot results in a use-after-free due to KVM not unbinding from the guest_memfd instance. Unbinding on a FLAGS_ONLY change is easy enough, and can/will be done as a hardening measure (in anticipation of KVM supporting dirty logging on guest_memfd at some point), but fixing the use-after-free would only address the immediate symptom. ================================================================== BUG: KASAN: slab-use-after-free in kvm_gmem_release+0x362/0x400 [kvm] Write of size 8 at addr ffff8881111ae908 by task repro/745 CPU: 7 UID: 1000 PID: 745 Comm: repro Not tainted 6.18.0-rc6-115d5de2eef3-next-kasan #3 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x51/0x60 print_report+0xcb/0x5c0 kasan_report+0xb4/0xe0 kvm_gmem_release+0x362/0x400 [kvm] __fput+0x2fa/0x9d0 task_work_run+0x12c/0x200 do_exit+0x6ae/0x2100 do_group_exit+0xa8/0x230 __x64_sys_exit_group+0x3a/0x50 x64_sys_call+0x737/0x740 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f581f2eac31 </TASK> Allocated by task 745 on cpu 6 at 9.746971s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50 __kasan_kmalloc+0x77/0x90 kvm_set_memory_region.part.0+0x652/0x1110 [kvm] kvm_vm_ioctl+0x14b0/0x3290 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 745 on cpu 6 at 9.747467s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50 __kasan_save_free_info+0x37/0x50 __kasan_slab_free+0x3b/0x60 kfree+0xf5/0x440 kvm_set_memslot+0x3c2/0x1160 [kvm] kvm_set_memory_region.part.0+0x86a/0x1110 [kvm] kvm_vm_ioctl+0x14b0/0x3290 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-68810.html
  CVE-2025-68810
• https://bugzilla.suse.com/1256679
  SUSE Bug 1256679

Описание

In the Linux kernel, the following vulnerability has been resolved: scsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path" This reverts commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9. The commit being reverted added code to __qla2x00_abort_all_cmds() to call sp->done() without holding a spinlock. But unlike the older code below it, this new code failed to check sp->cmd_type and just assumed TYPE_SRB, which results in a jump to an invalid pointer in target-mode with TYPE_TGT_CMD: qla2xxx [0000:65:00.0]-d034:8: qla24xx_do_nack_work create sess success 0000000009f7a79b qla2xxx [0000:65:00.0]-5003:8: ISP System Error - mbx1=1ff5h mbx2=10h mbx3=0h mbx4=0h mbx5=191h mbx6=0h mbx7=0h. qla2xxx [0000:65:00.0]-d01e:8: -> fwdump no buffer qla2xxx [0000:65:00.0]-f03a:8: qla_target(0): System error async event 0x8002 occurred qla2xxx [0000:65:00.0]-00af:8: Performing ISP error recovery - ha=0000000058183fda. BUG: kernel NULL pointer dereference, address: 0000000000000000 PF: supervisor instruction fetch in kernel mode PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9446 Comm: qla2xxx_8_dpc Tainted: G O 6.1.133 #1 Hardware name: Supermicro Super Server/X11SPL-F, BIOS 4.2 12/15/2023 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc90001f93dc8 EFLAGS: 00010206 RAX: 0000000000000282 RBX: 0000000000000355 RCX: ffff88810d16a000 RDX: ffff88810dbadaa8 RSI: 0000000000080000 RDI: ffff888169dc38c0 RBP: ffff888169dc38c0 R08: 0000000000000001 R09: 0000000000000045 R10: ffffffffa034bdf0 R11: 0000000000000000 R12: ffff88810800bb40 R13: 0000000000001aa8 R14: ffff888100136610 R15: ffff8881070f7400 FS: 0000000000000000(0000) GS:ffff88bf80080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000010c8ff006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x4d/0x8b ? page_fault_oops+0x91/0x180 ? trace_buffer_unlock_commit_regs+0x38/0x1a0 ? exc_page_fault+0x391/0x5e0 ? asm_exc_page_fault+0x22/0x30 __qla2x00_abort_all_cmds+0xcb/0x3e0 [qla2xxx_scst] qla2x00_abort_all_cmds+0x50/0x70 [qla2xxx_scst] qla2x00_abort_isp_cleanup+0x3b7/0x4b0 [qla2xxx_scst] qla2x00_abort_isp+0xfd/0x860 [qla2xxx_scst] qla2x00_do_dpc+0x581/0xa40 [qla2xxx_scst] kthread+0xa8/0xd0 </TASK> Then commit 4475afa2646d ("scsi: qla2xxx: Complete command early within lock") added the spinlock back, because not having the lock caused a race and a crash. But qla2x00_abort_srb() in the switch below already checks for qla2x00_chip_is_down() and handles it the same way, so the code above the switch is now redundant and still buggy in target-mode. Remove it.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-68818.html
  CVE-2025-68818
• https://bugzilla.suse.com/1256675
  SUSE Bug 1256675

Описание

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: fix use-after-free on probe deferral The driver is dropping the references taken to the larb devices during probe after successful lookup as well as on errors. This can potentially lead to a use-after-free in case a larb device has not yet been bound to its driver so that the iommu driver probe defers. Fix this by keeping the references as expected while the iommu driver is bound.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71071.html
  CVE-2025-71071
• https://bugzilla.suse.com/1256802
  SUSE Bug 1256802

Описание

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timer When advancing the target expiration for the guest's APIC timer in periodic mode, set the expiration to "now" if the target expiration is in the past (similar to what is done in update_target_expiration()). Blindly adding the period to the previous target expiration can result in KVM generating a practically unbounded number of hrtimer IRQs due to programming an expired timer over and over. In extreme scenarios, e.g. if userspace pauses/suspends a VM for an extended duration, this can even cause hard lockups in the host. Currently, the bug only affects Intel CPUs when using the hypervisor timer (HV timer), a.k.a. the VMX preemption timer. Unlike the software timer, a.k.a. hrtimer, which KVM keeps running even on exits to userspace, the HV timer only runs while the guest is active. As a result, if the vCPU does not run for an extended duration, there will be a huge gap between the target expiration and the current time the vCPU resumes running. Because the target expiration is incremented by only one period on each timer expiration, this leads to a series of timer expirations occurring rapidly after the vCPU/VM resumes. More critically, when the vCPU first triggers a periodic HV timer expiration after resuming, advancing the expiration by only one period will result in a target expiration in the past. As a result, the delta may be calculated as a negative value. When the delta is converted into an absolute value (tscdeadline is an unsigned u64), the resulting value can overflow what the HV timer is capable of programming. I.e. the large value will exceed the VMX Preemption Timer's maximum bit width of cpu_preemption_timer_multi + 32, and thus cause KVM to switch from the HV timer to the software timer (hrtimers). After switching to the software timer, periodic timer expiration callbacks may be executed consecutively within a single clock interrupt handler, because hrtimers honors KVM's request for an expiration in the past and immediately re-invokes KVM's callback after reprogramming. And because the interrupt handler runs with IRQs disabled, restarting KVM's hrtimer over and over until the target expiration is advanced to "now" can result in a hard lockup. E.g. the following hard lockup was triggered in the host when running a Windows VM (only relevant because it used the APIC timer in periodic mode) after resuming the VM from a long suspend (in the host). NMI watchdog: Watchdog detected hard LOCKUP on cpu 45 ... RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm] ... RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046 RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500 RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0 R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0 R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8 FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0 PKRU: 55555554 Call Trace: <IRQ> apic_timer_fn+0x31/0x50 [kvm] __hrtimer_run_queues+0x100/0x280 hrtimer_interrupt+0x100/0x210 ? ttwu_do_wakeup+0x19/0x160 smp_apic_timer_interrupt+0x6a/0x130 apic_timer_interrupt+0xf/0x20 </IRQ> Moreover, if the suspend duration of the virtual machine is not long enough to trigger a hard lockup in this scenario, since commit 98c25ead5eda ("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVM will continue using the software timer until the guest reprograms the APIC timer in some way. Since the periodic timer does not require frequent APIC timer register programming, the guest may continue to use the software timer in ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71104.html
  CVE-2025-71104
• https://bugzilla.suse.com/1256708
  SUSE Bug 1256708

Описание

In the Linux kernel, the following vulnerability has been resolved: tracing: Do not register unsupported perf events Synthetic events currently do not have a function to register perf events. This leads to calling the tracepoint register functions with a NULL function pointer which triggers: ------------[ cut here ]------------ WARNING: kernel/tracepoint.c:175 at tracepoint_add_func+0x357/0x370, CPU#2: perf/2272 Modules linked in: kvm_intel kvm irqbypass CPU: 2 UID: 0 PID: 2272 Comm: perf Not tainted 6.18.0-ftest-11964-ge022764176fc-dirty #323 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:tracepoint_add_func+0x357/0x370 Code: 28 9c e8 4c 0b f5 ff eb 0f 4c 89 f7 48 c7 c6 80 4d 28 9c e8 ab 89 f4 ff 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc <0f> 0b 49 c7 c6 ea ff ff ff e9 ee fe ff ff 0f 0b e9 f9 fe ff ff 0f RSP: 0018:ffffabc0c44d3c40 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff9380aa9e4060 RCX: 0000000000000000 RDX: 000000000000000a RSI: ffffffff9e1d4a98 RDI: ffff937fcf5fd6c8 RBP: 0000000000000001 R08: 0000000000000007 R09: ffff937fcf5fc780 R10: 0000000000000003 R11: ffffffff9c193910 R12: 000000000000000a R13: ffffffff9e1e5888 R14: 0000000000000000 R15: ffffabc0c44d3c78 FS: 00007f6202f5f340(0000) GS:ffff93819f00f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055d3162281a8 CR3: 0000000106a56003 CR4: 0000000000172ef0 Call Trace: <TASK> tracepoint_probe_register+0x5d/0x90 synth_event_reg+0x3c/0x60 perf_trace_event_init+0x204/0x340 perf_trace_init+0x85/0xd0 perf_tp_event_init+0x2e/0x50 perf_try_init_event+0x6f/0x230 ? perf_event_alloc+0x4bb/0xdc0 perf_event_alloc+0x65a/0xdc0 __se_sys_perf_event_open+0x290/0x9f0 do_syscall_64+0x93/0x7b0 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e ? trace_hardirqs_off+0x53/0xc0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Instead, have the code return -ENODEV, which doesn't warn and has perf error out with: # perf record -e synthetic:futex_wait Error: The sys_perf_event_open() syscall returned with 19 (No such device) for event (synthetic:futex_wait). "dmesg | grep -i perf" may provide additional information. Ideally perf should support synthetic events, but for now just fix the warning. The support can come later.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71125.html
  CVE-2025-71125
• https://bugzilla.suse.com/1256784
  SUSE Bug 1256784

Описание

In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: change all pageblocks migrate type on coalescing When a page is freed it coalesces with a buddy into a higher order page while possible. When the buddy page migrate type differs, it is expected to be updated to match the one of the page being freed. However, only the first pageblock of the buddy page is updated, while the rest of the pageblocks are left unchanged. That causes warnings in later expand() and other code paths (like below), since an inconsistency between migration type of the list containing the page and the page-owned pageblocks migration types is introduced. [ 308.986589] ------------[ cut here ]------------ [ 308.987227] page type is 0, passed migratetype is 1 (nr=256) [ 308.987275] WARNING: CPU: 1 PID: 5224 at mm/page_alloc.c:812 expand+0x23c/0x270 [ 308.987293] Modules linked in: algif_hash(E) af_alg(E) nft_fib_inet(E) nft_fib_ipv4(E) nft_fib_ipv6(E) nft_fib(E) nft_reject_inet(E) nf_reject_ipv4(E) nf_reject_ipv6(E) nft_reject(E) nft_ct(E) nft_chain_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) nf_tables(E) s390_trng(E) vfio_ccw(E) mdev(E) vfio_iommu_type1(E) vfio(E) sch_fq_codel(E) drm(E) i2c_core(E) drm_panel_orientation_quirks(E) loop(E) nfnetlink(E) vsock_loopback(E) vmw_vsock_virtio_transport_common(E) vsock(E) ctcm(E) fsm(E) diag288_wdt(E) watchdog(E) zfcp(E) scsi_transport_fc(E) ghash_s390(E) prng(E) aes_s390(E) des_generic(E) des_s390(E) libdes(E) sha3_512_s390(E) sha3_256_s390(E) sha_common(E) paes_s390(E) crypto_engine(E) pkey_cca(E) pkey_ep11(E) zcrypt(E) rng_core(E) pkey_pckmo(E) pkey(E) autofs4(E) [ 308.987439] Unloaded tainted modules: hmac_s390(E):2 [ 308.987650] CPU: 1 UID: 0 PID: 5224 Comm: mempig_verify Kdump: loaded Tainted: G E 6.18.0-gcc-bpf-debug #431 PREEMPT [ 308.987657] Tainted: [E]=UNSIGNED_MODULE [ 308.987661] Hardware name: IBM 3906 M04 704 (z/VM 7.3.0) [ 308.987666] Krnl PSW : 0404f00180000000 00000349976fa600 (expand+0x240/0x270) [ 308.987676] R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 [ 308.987682] Krnl GPRS: 0000034980000004 0000000000000005 0000000000000030 000003499a0e6d88 [ 308.987688] 0000000000000005 0000034980000005 000002be803ac000 0000023efe6c8300 [ 308.987692] 0000000000000008 0000034998d57290 000002be00000100 0000023e00000008 [ 308.987696] 0000000000000000 0000000000000000 00000349976fa5fc 000002c99b1eb6f0 [ 308.987708] Krnl Code: 00000349976fa5f0: c020008a02f2 larl %r2,000003499883abd4 00000349976fa5f6: c0e5ffe3f4b5 brasl %r14,0000034997378f60 #00000349976fa5fc: af000000 mc 0,0 >00000349976fa600: a7f4ff4c brc 15,00000349976fa498 00000349976fa604: b9040026 lgr %r2,%r6 00000349976fa608: c0300088317f larl %r3,0000034998800906 00000349976fa60e: c0e5fffdb6e1 brasl %r14,00000349976b13d0 00000349976fa614: af000000 mc 0,0 [ 308.987734] Call Trace: [ 308.987738] [<00000349976fa600>] expand+0x240/0x270 [ 308.987744] ([<00000349976fa5fc>] expand+0x23c/0x270) [ 308.987749] [<00000349976ff95e>] rmqueue_bulk+0x71e/0x940 [ 308.987754] [<00000349976ffd7e>] __rmqueue_pcplist+0x1fe/0x2a0 [ 308.987759] [<0000034997700966>] rmqueue.isra.0+0xb46/0xf40 [ 308.987763] [<0000034997703ec8>] get_page_from_freelist+0x198/0x8d0 [ 308.987768] [<0000034997706fa8>] __alloc_frozen_pages_noprof+0x198/0x400 [ 308.987774] [<00000349977536f8>] alloc_pages_mpol+0xb8/0x220 [ 308.987781] [<0000034997753bf6>] folio_alloc_mpol_noprof+0x26/0xc0 [ 308.987786] [<0000034997753e4c>] vma_alloc_folio_noprof+0x6c/0xa0 [ 308.987791] [<0000034997775b22>] vma_alloc_anon_folio_pmd+0x42/0x240 [ 308.987799] [<000003499777bfea>] __do_huge_pmd_anonymous_page+0x3a/0x210 [ 308.987804] [<00000349976cb0 ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71134.html
  CVE-2025-71134
• https://bugzilla.suse.com/1256732
  SUSE Bug 1256732

Описание

In the Linux kernel, the following vulnerability has been resolved: dm-verity: disable recursive forward error correction There are two problems with the recursive correction: 1. It may cause denial-of-service. In fec_read_bufs, there is a loop that has 253 iterations. For each iteration, we may call verity_hash_for_block recursively. There is a limit of 4 nested recursions - that means that there may be at most 253^4 (4 billion) iterations. Red Hat QE team actually created an image that pushes dm-verity to this limit - and this image just makes the udev-worker process get stuck in the 'D' state. 2. It doesn't work. In fec_read_bufs we store data into the variable "fio->bufs", but fio bufs is shared between recursive invocations, if "verity_hash_for_block" invoked correction recursively, it would overwrite partially filled fio->bufs.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71161.html
  CVE-2025-71161
• https://bugzilla.suse.com/1257174
  SUSE Bug 1257174

Описание

In the Linux kernel, the following vulnerability has been resolved: can: j1939: make j1939_session_activate() fail if device is no longer registered syzbot is still reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 even after commit 93a27b5891b8 ("can: j1939: add missing calls in NETDEV_UNREGISTER notification handler") was added. A debug printk() patch found that j1939_session_activate() can succeed even after j1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER) has completed. Since j1939_cancel_active_session() is processed with the session list lock held, checking ndev->reg_state in j1939_session_activate() with the session list lock held can reliably close the race window.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71182.html
  CVE-2025-71182
• https://bugzilla.suse.com/1257586
  SUSE Bug 1257586

Описание

In the Linux kernel, the following vulnerability has been resolved: btrfs: always detect conflicting inodes when logging inode refs After rename exchanging (either with the rename exchange operation or regular renames in multiple non-atomic steps) two inodes and at least one of them is a directory, we can end up with a log tree that contains only of the inodes and after a power failure that can result in an attempt to delete the other inode when it should not because it was not deleted before the power failure. In some case that delete attempt fails when the target inode is a directory that contains a subvolume inside it, since the log replay code is not prepared to deal with directory entries that point to root items (only inode items). 1) We have directories "dir1" (inode A) and "dir2" (inode B) under the same parent directory; 2) We have a file (inode C) under directory "dir1" (inode A); 3) We have a subvolume inside directory "dir2" (inode B); 4) All these inodes were persisted in a past transaction and we are currently at transaction N; 5) We rename the file (inode C), so at btrfs_log_new_name() we update inode C's last_unlink_trans to N; 6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B), so after the exchange "dir1" is inode B and "dir2" is inode A. During the rename exchange we call btrfs_log_new_name() for inodes A and B, but because they are directories, we don't update their last_unlink_trans to N; 7) An fsync against the file (inode C) is done, and because its inode has a last_unlink_trans with a value of N we log its parent directory (inode A) (through btrfs_log_all_parents(), called from btrfs_log_inode_parent()). 8) So we end up with inode B not logged, which now has the old name of inode A. At copy_inode_items_to_log(), when logging inode A, we did not check if we had any conflicting inode to log because inode A has a generation lower than the current transaction (created in a past transaction); 9) After a power failure, when replaying the log tree, since we find that inode A has a new name that conflicts with the name of inode B in the fs tree, we attempt to delete inode B... this is wrong since that directory was never deleted before the power failure, and because there is a subvolume inside that directory, attempting to delete it will fail since replay_dir_deletes() and btrfs_unlink_inode() are not prepared to deal with dir items that point to roots instead of inodes. When that happens the mount fails and we get a stack trace like the following: [87.2314] BTRFS info (device dm-0): start tree-log replay [87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259 [87.2332] ------------[ cut here ]------------ [87.2338] BTRFS: Transaction aborted (error -2) [87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs] [87.2368] Modules linked in: btrfs loop dm_thin_pool (...) [87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full) [87.2489] Tainted: [W]=WARN [87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs] [87.2538] Code: c0 89 04 24 (...) [87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286 [87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000 [87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff [87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840 [87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0 [87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10 [87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000 [87. ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71183.html
  CVE-2025-71183
• https://bugzilla.suse.com/1257631
  SUSE Bug 1257631

Описание

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix NULL dereference on root when tracing inode eviction When evicting an inode the first thing we do is to setup tracing for it, which implies fetching the root's id. But in btrfs_evict_inode() the root might be NULL, as implied in the next check that we do in btrfs_evict_inode(). Hence, we either should set the ->root_objectid to 0 in case the root is NULL, or we move tracing setup after checking that the root is not NULL. Setting the rootid to 0 at least gives us the possibility to trace this call even in the case when the root is NULL, so that's the solution taken here.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71184.html
  CVE-2025-71184
• https://bugzilla.suse.com/1257635
  SUSE Bug 1257635

Описание

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: dma-crossbar: fix device leak on am335x route allocation Make sure to drop the reference taken when looking up the crossbar platform device during am335x route allocation.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71185.html
  CVE-2025-71185
• https://bugzilla.suse.com/1257560
  SUSE Bug 1257560

Описание

In the Linux kernel, the following vulnerability has been resolved: dmaengine: stm32: dmamux: fix device leak on route allocation Make sure to drop the reference taken when looking up the DMA mux platform device during route allocation. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71186.html
  CVE-2025-71186
• https://bugzilla.suse.com/1257565
  SUSE Bug 1257565

Описание

In the Linux kernel, the following vulnerability has been resolved: dmaengine: lpc18xx-dmamux: fix device leak on route allocation Make sure to drop the reference taken when looking up the DMA mux platform device during route allocation. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71188.html
  CVE-2025-71188
• https://bugzilla.suse.com/1257576
  SUSE Bug 1257576

Описание

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw: dmamux: fix OF node leak on route allocation failure Make sure to drop the reference taken to the DMA master OF node also on late route allocation failures.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71189.html
  CVE-2025-71189
• https://bugzilla.suse.com/1257573
  SUSE Bug 1257573

Описание

In the Linux kernel, the following vulnerability has been resolved: dmaengine: bcm-sba-raid: fix device leak on probe Make sure to drop the reference taken when looking up the mailbox device during probe on probe failures and on driver unbind.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71190.html
  CVE-2025-71190
• https://bugzilla.suse.com/1257580
  SUSE Bug 1257580

Описание

In the Linux kernel, the following vulnerability has been resolved: dmaengine: at_hdmac: fix device leak on of_dma_xlate() Make sure to drop the reference taken when looking up the DMA platform device during of_dma_xlate() when releasing channel resources. Note that commit 3832b78b3ec2 ("dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()") fixed the leak in a couple of error paths but the reference is still leaking on successful allocation.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71191.html
  CVE-2025-71191
• https://bugzilla.suse.com/1257579
  SUSE Bug 1257579

Описание

In the Linux kernel, the following vulnerability has been resolved: ALSA: ac97: fix a double free in snd_ac97_controller_register() If ac97_add_adapter() fails, put_device() is the correct way to drop the device reference. kfree() is not required. Add kfree() if idr_alloc() fails and in ac97_adapter_release() to do the cleanup. Found by code review.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71192.html
  CVE-2025-71192
• https://bugzilla.suse.com/1257679
  SUSE Bug 1257679

Описание

In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qusb2: Fix NULL pointer dereference on early suspend Enabling runtime PM before attaching the QPHY instance as driver data can lead to a NULL pointer dereference in runtime PM callbacks that expect valid driver data. There is a small window where the suspend callback may run after PM runtime enabling and before runtime forbid. This causes a sporadic crash during boot: ``` Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a1 [...] CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.7+ #116 PREEMPT Workqueue: pm pm_runtime_work pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : qusb2_phy_runtime_suspend+0x14/0x1e0 [phy_qcom_qusb2] lr : pm_generic_runtime_suspend+0x2c/0x44 [...] ``` Attach the QPHY instance as driver data before enabling runtime PM to prevent NULL pointer dereference in runtime PM callbacks. Reorder pm_runtime_enable() and pm_runtime_forbid() to prevent a short window where an unnecessary runtime suspend can occur. Use the devres-managed version to ensure PM runtime is symmetrically disabled during driver removal for proper cleanup.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71193.html
  CVE-2025-71193
• https://bugzilla.suse.com/1257686
  SUSE Bug 1257686

Описание

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock in wait_current_trans() due to ignored transaction type When wait_current_trans() is called during start_transaction(), it currently waits for a blocked transaction without considering whether the given transaction type actually needs to wait for that particular transaction state. The btrfs_blocked_trans_types[] array already defines which transaction types should wait for which transaction states, but this check was missing in wait_current_trans(). This can lead to a deadlock scenario involving two transactions and pending ordered extents: 1. Transaction A is in TRANS_STATE_COMMIT_DOING state 2. A worker processing an ordered extent calls start_transaction() with TRANS_JOIN 3. join_transaction() returns -EBUSY because Transaction A is in TRANS_STATE_COMMIT_DOING 4. Transaction A moves to TRANS_STATE_UNBLOCKED and completes 5. A new Transaction B is created (TRANS_STATE_RUNNING) 6. The ordered extent from step 2 is added to Transaction B's pending ordered extents 7. Transaction B immediately starts commit by another task and enters TRANS_STATE_COMMIT_START 8. The worker finally reaches wait_current_trans(), sees Transaction B in TRANS_STATE_COMMIT_START (a blocked state), and waits unconditionally 9. However, TRANS_JOIN should NOT wait for TRANS_STATE_COMMIT_START according to btrfs_blocked_trans_types[] 10. Transaction B is waiting for pending ordered extents to complete 11. Deadlock: Transaction B waits for ordered extent, ordered extent waits for Transaction B This can be illustrated by the following call stacks: CPU0 CPU1 btrfs_finish_ordered_io() start_transaction(TRANS_JOIN) join_transaction() # -EBUSY (Transaction A is # TRANS_STATE_COMMIT_DOING) # Transaction A completes # Transaction B created # ordered extent added to # Transaction B's pending list btrfs_commit_transaction() # Transaction B enters # TRANS_STATE_COMMIT_START # waiting for pending ordered # extents wait_current_trans() # waits for Transaction B # (should not wait!) Task bstore_kv_sync in btrfs_commit_transaction waiting for ordered extents: __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 btrfs_commit_transaction+0xbf7/0xda0 [btrfs] btrfs_sync_file+0x342/0x4d0 [btrfs] __x64_sys_fdatasync+0x4b/0x80 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Task kworker in wait_current_trans waiting for transaction commit: Workqueue: btrfs-syno_nocow btrfs_work_helper [btrfs] __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 wait_current_trans+0xb0/0x110 [btrfs] start_transaction+0x346/0x5b0 [btrfs] btrfs_finish_ordered_io.isra.0+0x49b/0x9c0 [btrfs] btrfs_work_helper+0xe8/0x350 [btrfs] process_one_work+0x1d3/0x3c0 worker_thread+0x4d/0x3e0 kthread+0x12d/0x150 ret_from_fork+0x1f/0x30 Fix this by passing the transaction type to wait_current_trans() and checking btrfs_blocked_trans_types[cur_trans->state] against the given type before deciding to wait. This ensures that transaction types which are allowed to join during certain blocked states will not unnecessarily wait and cause deadlocks.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71194.html
  CVE-2025-71194
• https://bugzilla.suse.com/1257687
  SUSE Bug 1257687

Описание

In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx: xdma: Fix regmap max_register The max_register field is assigned the size of the register memory region instead of the offset of the last register. The result is that reading from the regmap via debugfs can cause a segmentation fault: tail /sys/kernel/debug/regmap/xdma.1.auto/registers Unable to handle kernel paging request at virtual address ffff800082f70000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault [...] Call trace: regmap_mmio_read32le+0x10/0x30 _regmap_bus_reg_read+0x74/0xc0 _regmap_read+0x68/0x198 regmap_read+0x54/0x88 regmap_read_debugfs+0x140/0x380 regmap_map_read_file+0x30/0x48 full_proxy_read+0x68/0xc8 vfs_read+0xcc/0x310 ksys_read+0x7c/0x120 __arm64_sys_read+0x24/0x40 invoke_syscall.constprop.0+0x64/0x108 do_el0_svc+0xb0/0xd8 el0_svc+0x38/0x130 el0t_64_sync_handler+0x120/0x138 el0t_64_sync+0x194/0x198 Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- note: tail[1217] exited with irqs disabled note: tail[1217] exited with preempt_count 1 Segmentation fault

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71195.html
  CVE-2025-71195
• https://bugzilla.suse.com/1257704
  SUSE Bug 1257704

Описание

In the Linux kernel, the following vulnerability has been resolved: phy: stm32-usphyc: Fix off by one in probe() The "index" variable is used as an index into the usbphyc->phys[] array which has usbphyc->nphys elements. So if it is equal to usbphyc->nphys then it is one element out of bounds. The "index" comes from the device tree so it's data that we trust and it's unlikely to be wrong, however it's obviously still worth fixing the bug. Change the > to >=.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71196.html
  CVE-2025-71196
• https://bugzilla.suse.com/1257716
  SUSE Bug 1257716

Описание

In the Linux kernel, the following vulnerability has been resolved: w1: therm: Fix off-by-one buffer overflow in alarms_store The sysfs buffer passed to alarms_store() is allocated with 'size + 1' bytes and a NUL terminator is appended. However, the 'size' argument does not account for this extra byte. The original code then allocated 'size' bytes and used strcpy() to copy 'buf', which always writes one byte past the allocated buffer since strcpy() copies until the NUL terminator at index 'size'. Fix this by parsing the 'buf' parameter directly using simple_strtoll() without allocating any intermediate memory or string copying. This removes the overflow while simplifying the code.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71197.html
  CVE-2025-71197
• https://bugzilla.suse.com/1257743
  SUSE Bug 1257743

Описание

In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without event detection The st_lsm6dsx_acc_channels array of struct iio_chan_spec has a non-NULL event_spec field, indicating support for IIO events. However, event detection is not supported for all sensors, and if userspace tries to configure accelerometer wakeup events on a sensor device that does not support them (e.g. LSM6DS0), st_lsm6dsx_write_event() dereferences a NULL pointer when trying to write to the wakeup register. Define an additional struct iio_chan_spec array whose members have a NULL event_spec field, and use this array instead of st_lsm6dsx_acc_channels for sensors without event detection capability.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71198.html
  CVE-2025-71198
• https://bugzilla.suse.com/1257741
  SUSE Bug 1257741

Описание

In the Linux kernel, the following vulnerability has been resolved: iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver at91_adc_interrupt can call at91_adc_touch_data_handler function to start the work by schedule_work(&st->touch_st.workq). If we remove the module which will call at91_adc_remove to make cleanup, it will free indio_dev through iio_device_unregister but quite a bit later. While the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | at91_adc_workq_handler at91_adc_remove | iio_device_unregister(indio_dev) | //free indio_dev a bit later | | iio_push_to_buffers(indio_dev) | //use indio_dev Fix it by ensuring that the work is canceled before proceeding with the cleanup in at91_adc_remove.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71199.html
  CVE-2025-71199
• https://bugzilla.suse.com/1257750
  SUSE Bug 1257750

Описание

In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in HS200/HS400 mode When operating in HS200 or HS400 timing modes, reducing the clock frequency below 52MHz will lead to link broken as the Rockchip DWC MSHC controller requires maintaining a minimum clock of 52MHz in these modes. Add a check to prevent illegal clock reduction through debugfs: root@debian:/# echo 50000000 > /sys/kernel/debug/mmc0/clock root@debian:/# [ 30.090146] mmc0: running CQE recovery mmc0: cqhci: Failed to halt mmc0: cqhci: spurious TCN for tag 0 WARNING: drivers/mmc/host/cqhci-core.c:797 at cqhci_irq+0x254/0x818, CPU#1: kworker/1:0H/24 Modules linked in: CPU: 1 UID: 0 PID: 24 Comm: kworker/1:0H Not tainted 6.19.0-rc1-00001-g09db0998649d-dirty #204 PREEMPT Hardware name: Rockchip RK3588 EVB1 V10 Board (DT) Workqueue: kblockd blk_mq_run_work_fn pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : cqhci_irq+0x254/0x818 lr : cqhci_irq+0x254/0x818 ...

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71200.html
  CVE-2025-71200
• https://bugzilla.suse.com/1258222
  SUSE Bug 1258222

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: ensure skb headroom before skb_push This avoids occasional skb_under_panic Oops from wl1271_tx_work. In this case, headroom is less than needed (typically 110 - 94 = 16 bytes).

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71222.html
  CVE-2025-71222
• https://bugzilla.suse.com/1258279
  SUSE Bug 1258279

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: ocb: skip rx_no_sta when interface is not joined ieee80211_ocb_rx_no_sta() assumes a valid channel context, which is only present after JOIN_OCB. RX may run before JOIN_OCB is executed, in which case the OCB interface is not operational. Skip RX peer handling when the interface is not joined to avoid warnings in the RX path.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71224.html
  CVE-2025-71224
• https://bugzilla.suse.com/1258824
  SUSE Bug 1258824

Описание

In the Linux kernel, the following vulnerability has been resolved: md: suspend array while updating raid_disks via sysfs In raid1_reshape(), freeze_array() is called before modifying the r1bio memory pool (conf->r1bio_pool) and conf->raid_disks, and unfreeze_array() is called after the update is completed. However, freeze_array() only waits until nr_sync_pending and (nr_pending - nr_queued) of all buckets reaches zero. When an I/O error occurs, nr_queued is increased and the corresponding r1bio is queued to either retry_list or bio_end_io_list. As a result, freeze_array() may unblock before these r1bios are released. This can lead to a situation where conf->raid_disks and the mempool have already been updated while queued r1bios, allocated with the old raid_disks value, are later released. Consequently, free_r1bio() may access memory out of bounds in put_all_bios() and release r1bios of the wrong size to the new mempool, potentially causing issues with the mempool as well. Since only normal I/O might increase nr_queued while an I/O error occurs, suspending the array avoids this issue. Note: Updating raid_disks via ioctl SET_ARRAY_INFO already suspends the array. Therefore, we suspend the array when updating raid_disks via sysfs to avoid this issue too.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71225.html
  CVE-2025-71225
• https://bugzilla.suse.com/1258411
  SUSE Bug 1258411

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Fix alignment fault in rtw_core_enable_beacon() rtw_core_enable_beacon() reads 4 bytes from an address that is not a multiple of 4. This results in a crash on some systems. Do 1 byte reads/writes instead. Unable to handle kernel paging request at virtual address ffff8000827e0522 Mem abort info: ESR = 0x0000000096000021 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000005492000 [ffff8000827e0522] pgd=0000000000000000, p4d=10000001021d9403, pud=10000001021da403, pmd=100000011061c403, pte=00780000f3200f13 Internal error: Oops: 0000000096000021 [#1] SMP Modules linked in: [...] rtw88_8822ce rtw88_8822c rtw88_pci rtw88_core [...] CPU: 0 UID: 0 PID: 73 Comm: kworker/u32:2 Tainted: G W 6.17.9 #1-NixOS VOLUNTARY Tainted: [W]=WARN Hardware name: FriendlyElec NanoPC-T6 LTS (DT) Workqueue: phy0 rtw_c2h_work [rtw88_core] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : rtw_pci_read32+0x18/0x40 [rtw88_pci] lr : rtw_core_enable_beacon+0xe0/0x148 [rtw88_core] sp : ffff800080cc3ca0 x29: ffff800080cc3ca0 x28: ffff0001031fc240 x27: ffff000102100828 x26: ffffd2cb7c9b4088 x25: ffff0001031fc2c0 x24: ffff000112fdef00 x23: ffff000112fdef18 x22: ffff000111c29970 x21: 0000000000000001 x20: 0000000000000001 x19: ffff000111c22040 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffd2cb6507c090 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000007f10 x1 : 0000000000000522 x0 : ffff8000827e0522 Call trace: rtw_pci_read32+0x18/0x40 [rtw88_pci] (P) rtw_hw_scan_chan_switch+0x124/0x1a8 [rtw88_core] rtw_fw_c2h_cmd_handle+0x254/0x290 [rtw88_core] rtw_c2h_work+0x50/0x98 [rtw88_core] process_one_work+0x178/0x3f8 worker_thread+0x208/0x418 kthread+0x120/0x220 ret_from_fork+0x10/0x20 Code: d28fe202 8b020000 f9524400 8b214000 (b9400000) ---[ end trace 0000000000000000 ]---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71229.html
  CVE-2025-71229
• https://bugzilla.suse.com/1258415
  SUSE Bug 1258415

Описание

In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix out-of-bounds index in find_empty_iaa_compression_mode The local variable 'i' is initialized with -EINVAL, but the for loop immediately overwrites it and -EINVAL is never returned. If no empty compression mode can be found, the function would return the out-of-bounds index IAA_COMP_MODES_MAX, which would cause an invalid array access in add_iaa_compression_mode(). Fix both issues by returning either a valid index or -EINVAL.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71231.html
  CVE-2025-71231
• https://bugzilla.suse.com/1258424
  SUSE Bug 1258424

Описание

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Free sp in error path to fix system crash System crash seen during load/unload test in a loop, [61110.449331] qla2xxx [0000:27:00.0]-0042:0: Disabled MSI-X. [61110.467494] ============================================================================= [61110.467498] BUG qla2xxx_srbs (Tainted: G OE -------- --- ): Objects remaining in qla2xxx_srbs on __kmem_cache_shutdown() [61110.467501] ----------------------------------------------------------------------------- [61110.467502] Slab 0x000000000ffc8162 objects=51 used=1 fp=0x00000000e25d3d85 flags=0x57ffffc0010200(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [61110.467509] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467513] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467515] Call Trace: [61110.467516] <TASK> [61110.467519] dump_stack_lvl+0x34/0x48 [61110.467526] slab_err.cold+0x53/0x67 [61110.467534] __kmem_cache_shutdown+0x16e/0x320 [61110.467540] kmem_cache_destroy+0x51/0x160 [61110.467544] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467607] ? __do_sys_delete_module.constprop.0+0x178/0x280 [61110.467613] ? syscall_trace_enter.constprop.0+0x145/0x1d0 [61110.467616] ? do_syscall_64+0x5c/0x90 [61110.467619] ? exc_page_fault+0x62/0x150 [61110.467622] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [61110.467626] </TASK> [61110.467627] Disabling lock debugging due to kernel taint [61110.467635] Object 0x0000000026f7e6e6 @offset=16000 [61110.467639] ------------[ cut here ]------------ [61110.467639] kmem_cache_destroy qla2xxx_srbs: Slab cache still has objects when called from qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467659] WARNING: CPU: 53 PID: 455206 at mm/slab_common.c:520 kmem_cache_destroy+0x14d/0x160 [61110.467718] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G B OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1 [61110.467720] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023 [61110.467721] RIP: 0010:kmem_cache_destroy+0x14d/0x160 [61110.467724] Code: 99 7d 07 00 48 89 ef e8 e1 6a 07 00 eb b3 48 8b 55 60 48 8b 4c 24 20 48 c7 c6 70 fc 66 90 48 c7 c7 f8 ef a1 90 e8 e1 ed 7c 00 <0f> 0b eb 93 c3 cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 [61110.467725] RSP: 0018:ffffa304e489fe80 EFLAGS: 00010282 [61110.467727] RAX: 0000000000000000 RBX: ffffffffc0d9a860 RCX: 0000000000000027 [61110.467729] RDX: ffff8fd5ff9598a8 RSI: 0000000000000001 RDI: ffff8fd5ff9598a0 [61110.467730] RBP: ffff8fb6aaf78700 R08: 0000000000000000 R09: 0000000100d863b7 [61110.467731] R10: ffffa304e489fd20 R11: ffffffff913bef48 R12: 0000000040002000 [61110.467731] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [61110.467733] FS: 00007f64c89fb740(0000) GS:ffff8fd5ff940000(0000) knlGS:0000000000000000 [61110.467734] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [61110.467735] CR2: 00007f0f02bfe000 CR3: 00000020ad6dc005 CR4: 0000000000770ee0 [61110.467736] PKRU: 55555554 [61110.467737] Call Trace: [61110.467738] <TASK> [61110.467739] qla2x00_module_exit+0x93/0x99 [qla2xxx] [61110.467755] ? __do_sys_delete_module.constprop.0+0x178/0x280 Free sp in the error path to fix the crash.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71232.html
  CVE-2025-71232
• https://bugzilla.suse.com/1258422
  SUSE Bug 1258422

Описание

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Avoid creating sub-groups asynchronously The asynchronous creation of sub-groups by a delayed work could lead to a NULL pointer dereference when the driver directory is removed before the work completes. The crash can be easily reproduced with the following commands: # cd /sys/kernel/config/pci_ep/functions/pci_epf_test # for i in {1..20}; do mkdir test && rmdir test; done BUG: kernel NULL pointer dereference, address: 0000000000000088 ... Call Trace: configfs_register_group+0x3d/0x190 pci_epf_cfs_work+0x41/0x110 process_one_work+0x18f/0x350 worker_thread+0x25a/0x3a0 Fix this issue by using configfs_add_default_group() API which does not have the deadlock problem as configfs_register_group() and does not require the delayed work handler. [mani: slightly reworded the description and added stable list]

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71233.html
  CVE-2025-71233
• https://bugzilla.suse.com/1258421
  SUSE Bug 1258421

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_add The driver does not set hw->sta_data_size, which causes mac80211 to allocate insufficient space for driver private station data in __sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of struct rtl8xxxu_sta_info through sta->drv_priv, this results in a slab-out-of-bounds write. KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter: BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346 Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12 Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during probe, similar to how hw->vif_data_size is configured. This ensures mac80211 allocates sufficient space for the driver's per-station private data. Tested on StarFive VisionFive 2 v1.2A board.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71234.html
  CVE-2025-71234
• https://bugzilla.suse.com/1258419
  SUSE Bug 1258419
• https://bugzilla.suse.com/1258420
  SUSE Bug 1258420

Описание

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Delay module unload while fabric scan in progress System crash seen during load/unload test in a loop. [105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086 [105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0 [105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000 [105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000 [105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0 [105954.384928] PKRU: 55555554 [105954.384929] Call Trace: [105954.384931] <IRQ> [105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx] [105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx] [105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx] [105954.384999] ? __wake_up_common+0x80/0x190 [105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx] [105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx] [105954.385040] ? __handle_irq_event_percpu+0x3d/0x190 [105954.385044] ? handle_irq_event+0x58/0xb0 [105954.385046] ? handle_edge_irq+0x93/0x240 [105954.385050] ? __common_interrupt+0x41/0xa0 [105954.385055] ? common_interrupt+0x3e/0xa0 [105954.385060] ? asm_common_interrupt+0x22/0x40 The root cause of this was that there was a free (dma_free_attrs) in the interrupt context. There was a device discovery/fabric scan in progress. A module unload was issued which set the UNLOADING flag. As part of the discovery, after receiving an interrupt a work queue was scheduled (which involved a work to be queued). Since the UNLOADING flag is set, the work item was not allocated and the mapped memory had to be freed. The free occurred in interrupt context leading to system crash. Delay the driver unload until the fabric scan is complete to avoid the crash.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71235.html
  CVE-2025-71235
• https://bugzilla.suse.com/1258469
  SUSE Bug 1258469

Описание

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Validate sp before freeing associated memory System crash with the following signature [154563.214890] nvme nvme2: NVME-FC{1}: controller connect complete [154564.169363] qla2xxx [0000:b0:00.1]-3002:2: nvme: Sched: Set ZIO exchange threshold to 3. [154564.169405] qla2xxx [0000:b0:00.1]-ffffff:2: SET ZIO Activity exchange threshold to 5. [154565.539974] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed - 0078 0080 0000. [154565.545744] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed - 0078 00a0 0000. [154565.545857] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate). [154565.552760] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate). [154565.553079] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [154565.553080] #PF: supervisor read access in kernel mode [154565.553082] #PF: error_code(0x0000) - not-present page [154565.553084] PGD 80000010488ab067 P4D 80000010488ab067 PUD 104978a067 PMD 0 [154565.553089] Oops: 0000 1 PREEMPT SMP PTI [154565.553092] CPU: 10 PID: 858 Comm: qla2xxx_2_dpc Kdump: loaded Tainted: G OE ------- --- 5.14.0-503.11.1.el9_5.x86_64 #1 [154565.553096] Hardware name: HPE Synergy 660 Gen10/Synergy 660 Gen10 Compute Module, BIOS I43 09/30/2024 [154565.553097] RIP: 0010:qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx] [154565.553141] Code: 00 00 e8 58 a3 ec d4 49 89 e9 ba 12 20 00 00 4c 89 e6 49 c7 c0 00 ee a8 c0 48 c7 c1 66 c0 a9 c0 bf 00 80 00 10 e8 15 69 00 00 <4c> 8b 8d f8 00 00 00 4d 85 c9 74 35 49 8b 84 24 00 19 00 00 48 8b [154565.553143] RSP: 0018:ffffb4dbc8aebdd0 EFLAGS: 00010286 [154565.553145] RAX: 0000000000000000 RBX: ffff8ec2cf0908d0 RCX: 0000000000000002 [154565.553147] RDX: 0000000000000000 RSI: ffffffffc0a9c896 RDI: ffffb4dbc8aebd47 [154565.553148] RBP: 0000000000000000 R08: ffffb4dbc8aebd45 R09: 0000000000ffff0a [154565.553150] R10: 0000000000000000 R11: 000000000000000f R12: ffff8ec2cf0908d0 [154565.553151] R13: ffff8ec2cf090900 R14: 0000000000000102 R15: ffff8ec2cf084000 [154565.553152] FS: 0000000000000000(0000) GS:ffff8ed27f800000(0000) knlGS:0000000000000000 [154565.553154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [154565.553155] CR2: 00000000000000f8 CR3: 000000113ae0a005 CR4: 00000000007706f0 [154565.553157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [154565.553158] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [154565.553159] PKRU: 55555554 [154565.553160] Call Trace: [154565.553162] <TASK> [154565.553165] ? show_trace_log_lvl+0x1c4/0x2df [154565.553172] ? show_trace_log_lvl+0x1c4/0x2df [154565.553177] ? qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx] [154565.553215] ? __die_body.cold+0x8/0xd [154565.553218] ? page_fault_oops+0x134/0x170 [154565.553223] ? snprintf+0x49/0x70 [154565.553229] ? exc_page_fault+0x62/0x150 [154565.553238] ? asm_exc_page_fault+0x22/0x30 Check for sp being non NULL before freeing any associated memory

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2025-71236.html
  CVE-2025-71236
• https://bugzilla.suse.com/1258442
  SUSE Bug 1258442

Описание

In the Linux kernel, the following vulnerability has been resolved: net: fix memory leak in skb_segment_list for GRO packets When skb_segment_list() is called during packet forwarding, it handles packets that were aggregated by the GRO engine. Historically, the segmentation logic in skb_segment_list assumes that individual segments are split from a parent SKB and may need to carry their own socket memory accounting. Accordingly, the code transfers truesize from the parent to the newly created segments. Prior to commit ed4cccef64c1 ("gro: fix ownership transfer"), this truesize subtraction in skb_segment_list() was valid because fragments still carry a reference to the original socket. However, commit ed4cccef64c1 ("gro: fix ownership transfer") changed this behavior by ensuring that fraglist entries are explicitly orphaned (skb->sk = NULL) to prevent illegal orphaning later in the stack. This change meant that the entire socket memory charge remained with the head SKB, but the corresponding accounting logic in skb_segment_list() was never updated. As a result, the current code unconditionally adds each fragment's truesize to delta_truesize and subtracts it from the parent SKB. Since the fragments are no longer charged to the socket, this subtraction results in an effective under-count of memory when the head is freed. This causes sk_wmem_alloc to remain non-zero, preventing socket destruction and leading to a persistent memory leak. The leak can be observed via KMEMLEAK when tearing down the networking environment: unreferenced object 0xffff8881e6eb9100 (size 2048): comm "ping", pid 6720, jiffies 4295492526 backtrace: kmem_cache_alloc_noprof+0x5c6/0x800 sk_prot_alloc+0x5b/0x220 sk_alloc+0x35/0xa00 inet6_create.part.0+0x303/0x10d0 __sock_create+0x248/0x640 __sys_socket+0x11b/0x1d0 Since skb_segment_list() is exclusively used for SKB_GSO_FRAGLIST packets constructed by GRO, the truesize adjustment is removed. The call to skb_release_head_state() must be preserved. As documented in commit cf673ed0e057 ("net: fix fraglist segmentation reference count leak"), it is still required to correctly drop references to SKB extensions that may be overwritten during __copy_skb_header().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-22979.html
  CVE-2026-22979
• https://bugzilla.suse.com/1257228
  SUSE Bug 1257228

Описание

In the Linux kernel, the following vulnerability has been resolved: nfsd: provide locking for v4_end_grace Writing to v4_end_grace can race with server shutdown and result in memory being accessed after it was freed - reclaim_str_hashtbl in particularly. We cannot hold nfsd_mutex across the nfsd4_end_grace() call as that is held while client_tracking_op->init() is called and that can wait for an upcall to nfsdcltrack which can write to v4_end_grace, resulting in a deadlock. nfsd4_end_grace() is also called by the landromat work queue and this doesn't require locking as server shutdown will stop the work and wait for it before freeing anything that nfsd4_end_grace() might access. However, we must be sure that writing to v4_end_grace doesn't restart the work item after shutdown has already waited for it. For this we add a new flag protected with nn->client_lock. It is set only while it is safe to make client tracking calls, and v4_end_grace only schedules work while the flag is set with the spinlock held. So this patch adds a nfsd_net field "client_tracking_active" which is set as described. Another field "grace_end_forced", is set when v4_end_grace is written. After this is set, and providing client_tracking_active is set, the laundromat is scheduled. This "grace_end_forced" field bypasses other checks for whether the grace period has finished. This resolves a race which can result in use-after-free.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-22980.html
  CVE-2026-22980
• https://bugzilla.suse.com/1257222
  SUSE Bug 1257222

Описание

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec Commit efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length") added ttag bounds checking and data_offset validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate whether the command's data structures (cmd->req.sg and cmd->iov) have been properly initialized before processing H2C_DATA PDUs. The nvmet_tcp_build_pdu_iovec() function dereferences these pointers without NULL checks. This can be triggered by sending H2C_DATA PDU immediately after the ICREQ/ICRESP handshake, before sending a CONNECT command or NVMe write command. Attack vectors that trigger NULL pointer dereferences: 1. H2C_DATA PDU sent before CONNECT -> both pointers NULL 2. H2C_DATA PDU for READ command -> cmd->req.sg allocated, cmd->iov NULL 3. H2C_DATA PDU for uninitialized command slot -> both pointers NULL The fix validates both cmd->req.sg and cmd->iov before calling nvmet_tcp_build_pdu_iovec(). Both checks are required because: - Uninitialized commands: both NULL - READ commands: cmd->req.sg allocated, cmd->iov NULL - WRITE commands: both allocated

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-22998.html
  CVE-2026-22998
• https://bugzilla.suse.com/1257209
  SUSE Bug 1257209

Описание

In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv() Blamed commit did not take care of VLAN encapsulations as spotted by syzbot [1]. Use skb_vlan_inet_prepare() instead of pskb_inet_may_pull(). [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x16f/0x1b0 net/ipv6/ip6_tunnel.c:729 __ip6_tnl_rcv+0xed9/0x1b50 net/ipv6/ip6_tunnel.c:860 ip6_tnl_rcv+0xc3/0x100 net/ipv6/ip6_tunnel.c:903 gre_rcv+0x1529/0x1b90 net/ipv6/ip6_gre.c:-1 ip6_protocol_deliver_rcu+0x1c89/0x2c60 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1f4/0x4a0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] ip6_input+0x9c/0x330 net/ipv6/ip6_input.c:500 ip6_mc_input+0x7ca/0xc10 net/ipv6/ip6_input.c:590 dst_input include/net/dst.h:474 [inline] ip6_rcv_finish+0x958/0x990 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:318 [inline] ipv6_rcv+0xf1/0x3c0 net/ipv6/ip6_input.c:311 __netif_receive_skb_one_core net/core/dev.c:6139 [inline] __netif_receive_skb+0x1df/0xac0 net/core/dev.c:6252 netif_receive_skb_internal net/core/dev.c:6338 [inline] netif_receive_skb+0x57/0x630 net/core/dev.c:6397 tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485 tun_get_user+0x5c0e/0x6c60 drivers/net/tun.c:1953 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4960 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_node_noprof+0x9e7/0x17a0 mm/slub.c:5315 kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:586 __alloc_skb+0x805/0x1040 net/core/skbuff.c:690 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0xc5/0xa60 net/core/skbuff.c:6712 sock_alloc_send_pskb+0xacc/0xc60 net/core/sock.c:2995 tun_alloc_skb drivers/net/tun.c:1461 [inline] tun_get_user+0x1142/0x6c60 drivers/net/tun.c:1794 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 6465 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(none) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23003.html
  CVE-2026-23003
• https://bugzilla.suse.com/1257246
  SUSE Bug 1257246

Описание

In the Linux kernel, the following vulnerability has been resolved: dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list() syzbot was able to crash the kernel in rt6_uncached_list_flush_dev() in an interesting way [1] Crash happens in list_del_init()/INIT_LIST_HEAD() while writing list->prev, while the prior write on list->next went well. static inline void INIT_LIST_HEAD(struct list_head *list) { WRITE_ONCE(list->next, list); // This went well WRITE_ONCE(list->prev, list); // Crash, @list has been freed. } Issue here is that rt6_uncached_list_del() did not attempt to lock ul->lock, as list_empty(&rt->dst.rt_uncached) returned true because the WRITE_ONCE(list->next, list) happened on the other CPU. We might use list_del_init_careful() and list_empty_careful(), or make sure rt6_uncached_list_del() always grabs the spinlock whenever rt->dst.rt_uncached_list has been set. A similar fix is neeed for IPv4. [1] BUG: KASAN: slab-use-after-free in INIT_LIST_HEAD include/linux/list.h:46 [inline] BUG: KASAN: slab-use-after-free in list_del_init include/linux/list.h:296 [inline] BUG: KASAN: slab-use-after-free in rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline] BUG: KASAN: slab-use-after-free in rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020 Write of size 8 at addr ffff8880294cfa78 by task kworker/u8:14/3450 CPU: 0 UID: 0 PID: 3450 Comm: kworker/u8:14 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Workqueue: netns cleanup_net Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 INIT_LIST_HEAD include/linux/list.h:46 [inline] list_del_init include/linux/list.h:296 [inline] rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline] rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020 addrconf_ifdown+0x143/0x18a0 net/ipv6/addrconf.c:3853 addrconf_notify+0x1bc/0x1050 net/ipv6/addrconf.c:-1 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] netif_close_many+0x29c/0x410 net/core/dev.c:1785 unregister_netdevice_many_notify+0xb50/0x2330 net/core/dev.c:12353 ops_exit_rtnl_list net/core/net_namespace.c:187 [inline] ops_undo_list+0x3dc/0x990 net/core/net_namespace.c:248 cleanup_net+0x4de/0x7b0 net/core/net_namespace.c:696 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> Allocated by task 803: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 unpoison_slab_object mm/kasan/common.c:340 [inline] __kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366 kasan_slab_alloc include/linux/kasan.h:253 [inline] slab_post_alloc_hook mm/slub.c:4953 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x18d/0x6c0 mm/slub.c:5270 dst_alloc+0x105/0x170 net/core/dst.c:89 ip6_dst_alloc net/ipv6/route.c:342 [inline] icmp6_dst_alloc+0x75/0x460 net/ipv6/route.c:3333 mld_sendpack+0x683/0xe60 net/ipv6/mcast.c:1844 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entr ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23004.html
  CVE-2026-23004
• https://bugzilla.suse.com/1257231
  SUSE Bug 1257231
• https://bugzilla.suse.com/1258655
  SUSE Bug 1258655

Описание

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix use-after-free in inet6_addr_del(). syzbot reported use-after-free of inet6_ifaddr in inet6_addr_del(). [0] The cited commit accidentally moved ipv6_del_addr() for mngtmpaddr before reading its ifp->flags for temporary addresses in inet6_addr_del(). Let's move ipv6_del_addr() down to fix the UAF. [0]: BUG: KASAN: slab-use-after-free in inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117 Read of size 4 at addr ffff88807b89c86c by task syz.3.1618/9593 CPU: 0 UID: 0 PID: 9593 Comm: syz.3.1618 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117 addrconf_del_ifaddr+0x11e/0x190 net/ipv6/addrconf.c:3181 inet6_ioctl+0x1e5/0x2b0 net/ipv6/af_inet6.c:582 sock_do_ioctl+0x118/0x280 net/socket.c:1254 sock_ioctl+0x227/0x6b0 net/socket.c:1375 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f164cf8f749 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f164de64038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f164d1e5fa0 RCX: 00007f164cf8f749 RDX: 0000200000000000 RSI: 0000000000008936 RDI: 0000000000000003 RBP: 00007f164d013f91 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f164d1e6038 R14: 00007f164d1e5fa0 R15: 00007ffde15c8288 </TASK> Allocated by task 9593: kasan_save_stack+0x33/0x60 mm/kasan/common.c:56 kasan_save_track+0x14/0x30 mm/kasan/common.c:77 poison_kmalloc_redzone mm/kasan/common.c:397 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:414 kmalloc_noprof include/linux/slab.h:957 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] ipv6_add_addr+0x4e3/0x2010 net/ipv6/addrconf.c:1120 inet6_addr_add+0x256/0x9b0 net/ipv6/addrconf.c:3050 addrconf_add_ifaddr+0x1fc/0x450 net/ipv6/addrconf.c:3160 inet6_ioctl+0x103/0x2b0 net/ipv6/af_inet6.c:580 sock_do_ioctl+0x118/0x280 net/socket.c:1254 sock_ioctl+0x227/0x6b0 net/socket.c:1375 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6099: kasan_save_stack+0x33/0x60 mm/kasan/common.c:56 kasan_save_track+0x14/0x30 mm/kasan/common.c:77 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:252 [inline] __kasan_slab_free+0x5f/0x80 mm/kasan/common.c:284 kasan_slab_free include/linux/kasan.h:234 [inline] slab_free_hook mm/slub.c:2540 [inline] slab_free_freelist_hook mm/slub.c:2569 [inline] slab_free_bulk mm/slub.c:6696 [inline] kmem_cache_free_bulk mm/slub.c:7383 [inline] kmem_cache_free_bulk+0x2bf/0x680 mm/slub.c:7362 kfree_bulk include/linux/slab.h:830 [inline] kvfree_rcu_bulk+0x1b7/0x1e0 mm/slab_common.c:1523 kvfree_rcu_drain_ready mm/slab_common.c:1728 [inline] kfree_rcu_monitor+0x1d0/0x2f0 mm/slab_common.c:1801 process_one_work+0x9ba/0x1b20 kernel/workqueue.c:3257 process_scheduled_works kernel/workqu ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23010.html
  CVE-2026-23010
• https://bugzilla.suse.com/1257332
  SUSE Bug 1257332

Описание

In the Linux kernel, the following vulnerability has been resolved: idpf: fix error handling in the init_task on load If the init_task fails during a driver load, we end up without vports and netdevs, effectively failing the entire process. In that state a subsequent reset will result in a crash as the service task attempts to access uninitialized resources. Following trace is from an error in the init_task where the CREATE_VPORT (op 501) is rejected by the FW: [40922.763136] idpf 0000:83:00.0: Device HW Reset initiated [40924.449797] idpf 0000:83:00.0: Transaction failed (op 501) [40958.148190] idpf 0000:83:00.0: HW reset detected [40958.161202] BUG: kernel NULL pointer dereference, address: 00000000000000a8 ... [40958.168094] Workqueue: idpf-0000:83:00.0-vc_event idpf_vc_event_task [idpf] [40958.168865] RIP: 0010:idpf_vc_event_task+0x9b/0x350 [idpf] ... [40958.177932] Call Trace: [40958.178491] <TASK> [40958.179040] process_one_work+0x226/0x6d0 [40958.179609] worker_thread+0x19e/0x340 [40958.180158] ? __pfx_worker_thread+0x10/0x10 [40958.180702] kthread+0x10f/0x250 [40958.181238] ? __pfx_kthread+0x10/0x10 [40958.181774] ret_from_fork+0x251/0x2b0 [40958.182307] ? __pfx_kthread+0x10/0x10 [40958.182834] ret_from_fork_asm+0x1a/0x30 [40958.183370] </TASK> Fix the error handling in the init_task to make sure the service and mailbox tasks are disabled if the error happens during load. These are started in idpf_vc_core_init(), which spawns the init_task and has no way of knowing if it failed. If the error happens on reset, following successful driver load, the tasks can still run, as that will allow the netdevs to attempt recovery through another reset. Stop the PTP callbacks either way as those will be restarted by the call to idpf_vc_core_init() during a successful reset.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23017.html
  CVE-2026-23017
• https://bugzilla.suse.com/1257552
  SUSE Bug 1257552

Описание

In the Linux kernel, the following vulnerability has been resolved: btrfs: release path before initializing extent tree in btrfs_read_locked_inode() In btrfs_read_locked_inode() we are calling btrfs_init_file_extent_tree() while holding a path with a read locked leaf from a subvolume tree, and btrfs_init_file_extent_tree() may do a GFP_KERNEL allocation, which can trigger reclaim. This can create a circular lock dependency which lockdep warns about with the following splat: [6.1433] ====================================================== [6.1574] WARNING: possible circular locking dependency detected [6.1583] 6.18.0+ #4 Tainted: G U [6.1591] ------------------------------------------------------ [6.1599] kswapd0/117 is trying to acquire lock: [6.1606] ffff8d9b6333c5b8 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1625] but task is already holding lock: [6.1633] ffffffffa4ab8ce0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x195/0xc60 [6.1646] which lock already depends on the new lock. [6.1657] the existing dependency chain (in reverse order) is: [6.1667] -> #2 (fs_reclaim){+.+.}-{0:0}: [6.1677] fs_reclaim_acquire+0x9d/0xd0 [6.1685] __kmalloc_cache_noprof+0x59/0x750 [6.1694] btrfs_init_file_extent_tree+0x90/0x100 [6.1702] btrfs_read_locked_inode+0xc3/0x6b0 [6.1710] btrfs_iget+0xbb/0xf0 [6.1716] btrfs_lookup_dentry+0x3c5/0x8e0 [6.1724] btrfs_lookup+0x12/0x30 [6.1731] lookup_open.isra.0+0x1aa/0x6a0 [6.1739] path_openat+0x5f7/0xc60 [6.1746] do_filp_open+0xd6/0x180 [6.1753] do_sys_openat2+0x8b/0xe0 [6.1760] __x64_sys_openat+0x54/0xa0 [6.1768] do_syscall_64+0x97/0x3e0 [6.1776] entry_SYSCALL_64_after_hwframe+0x76/0x7e [6.1784] -> #1 (btrfs-tree-00){++++}-{3:3}: [6.1794] lock_release+0x127/0x2a0 [6.1801] up_read+0x1b/0x30 [6.1808] btrfs_search_slot+0x8e0/0xff0 [6.1817] btrfs_lookup_inode+0x52/0xd0 [6.1825] __btrfs_update_delayed_inode+0x73/0x520 [6.1833] btrfs_commit_inode_delayed_inode+0x11a/0x120 [6.1842] btrfs_log_inode+0x608/0x1aa0 [6.1849] btrfs_log_inode_parent+0x249/0xf80 [6.1857] btrfs_log_dentry_safe+0x3e/0x60 [6.1865] btrfs_sync_file+0x431/0x690 [6.1872] do_fsync+0x39/0x80 [6.1879] __x64_sys_fsync+0x13/0x20 [6.1887] do_syscall_64+0x97/0x3e0 [6.1894] entry_SYSCALL_64_after_hwframe+0x76/0x7e [6.1903] -> #0 (&delayed_node->mutex){+.+.}-{3:3}: [6.1913] __lock_acquire+0x15e9/0x2820 [6.1920] lock_acquire+0xc9/0x2d0 [6.1927] __mutex_lock+0xcc/0x10a0 [6.1934] __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1944] btrfs_evict_inode+0x20b/0x4b0 [6.1952] evict+0x15a/0x2f0 [6.1958] prune_icache_sb+0x91/0xd0 [6.1966] super_cache_scan+0x150/0x1d0 [6.1974] do_shrink_slab+0x155/0x6f0 [6.1981] shrink_slab+0x48e/0x890 [6.1988] shrink_one+0x11a/0x1f0 [6.1995] shrink_node+0xbfd/0x1320 [6.1002] balance_pgdat+0x67f/0xc60 [6.1321] kswapd+0x1dc/0x3e0 [6.1643] kthread+0xff/0x240 [6.1965] ret_from_fork+0x223/0x280 [6.1287] ret_from_fork_asm+0x1a/0x30 [6.1616] other info that might help us debug this: [6.1561] Chain exists of: &delayed_node->mutex --> btrfs-tree-00 --> fs_reclaim [6.1503] Possible unsafe locking scenario: [6.1110] CPU0 CPU1 [6.1411] ---- ---- [6.1707] lock(fs_reclaim); [6.1998] lock(btrfs-tree-00); [6.1291] lock(fs_reclaim); [6.1581] lock(&del ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23018.html
  CVE-2026-23018
• https://bugzilla.suse.com/1257551
  SUSE Bug 1257551

Описание

In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: fix memory leak in update_eth_regs_async() When asynchronously writing to the device registers and if usb_submit_urb() fail, the code fail to release allocated to this point resources.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23021.html
  CVE-2026-23021
• https://bugzilla.suse.com/1257557
  SUSE Bug 1257557

Описание

In the Linux kernel, the following vulnerability has been resolved: idpf: fix memory leak in idpf_vc_core_deinit() Make sure to free hw->lan_regs. Reported by kmemleak during reset: unreferenced object 0xff1b913d02a936c0 (size 96): comm "kworker/u258:14", pid 2174, jiffies 4294958305 hex dump (first 32 bytes): 00 00 00 c0 a8 ba 2d ff 00 00 00 00 00 00 00 00 ......-......... 00 00 40 08 00 00 00 00 00 00 25 b3 a8 ba 2d ff ..@.......%...-. backtrace (crc 36063c4f): __kmalloc_noprof+0x48f/0x890 idpf_vc_core_init+0x6ce/0x9b0 [idpf] idpf_vc_event_task+0x1fb/0x350 [idpf] process_one_work+0x226/0x6d0 worker_thread+0x19e/0x340 kthread+0x10f/0x250 ret_from_fork+0x251/0x2b0 ret_from_fork_asm+0x1a/0x30

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23022.html
  CVE-2026-23022
• https://bugzilla.suse.com/1257581
  SUSE Bug 1257581

Описание

In the Linux kernel, the following vulnerability has been resolved: idpf: fix memory leak in idpf_vport_rel() Free vport->rx_ptype_lkup in idpf_vport_rel() to avoid leaking memory during a reset. Reported by kmemleak: unreferenced object 0xff450acac838a000 (size 4096): comm "kworker/u258:5", pid 7732, jiffies 4296830044 hex dump (first 32 bytes): 00 00 00 00 00 10 00 00 00 10 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 ................ backtrace (crc 3da81902): __kmalloc_cache_noprof+0x469/0x7a0 idpf_send_get_rx_ptype_msg+0x90/0x570 [idpf] idpf_init_task+0x1ec/0x8d0 [idpf] process_one_work+0x226/0x6d0 worker_thread+0x19e/0x340 kthread+0x10f/0x250 ret_from_fork+0x251/0x2b0 ret_from_fork_asm+0x1a/0x30

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23023.html
  CVE-2026-23023
• https://bugzilla.suse.com/1257556
  SUSE Bug 1257556

Описание

In the Linux kernel, the following vulnerability has been resolved: idpf: fix memory leak of flow steer list on rmmod The flow steering list maintains entries that are added and removed as ethtool creates and deletes flow steering rules. Module removal with active entries causes memory leak as the list is not properly cleaned up. Prevent this by iterating through the remaining entries in the list and freeing the associated memory during module removal. Add a spinlock (flow_steer_list_lock) to protect the list access from multiple threads.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23024.html
  CVE-2026-23024
• https://bugzilla.suse.com/1257572
  SUSE Bug 1257572

Описание

In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom: gpi: Fix memory leak in gpi_peripheral_config() Fix a memory leak in gpi_peripheral_config() where the original memory pointed to by gchan->config could be lost if krealloc() fails. The issue occurs when: 1. gchan->config points to previously allocated memory 2. krealloc() fails and returns NULL 3. The function directly assigns NULL to gchan->config, losing the reference to the original memory 4. The original memory becomes unreachable and cannot be freed Fix this by using a temporary variable to hold the krealloc() result and only updating gchan->config when the allocation succeeds. Found via static analysis and code review.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23026.html
  CVE-2026-23026
• https://bugzilla.suse.com/1257562
  SUSE Bug 1257562

Описание

In the Linux kernel, the following vulnerability has been resolved: phy: rockchip: inno-usb2: Fix a double free bug in rockchip_usb2phy_probe() The for_each_available_child_of_node() calls of_node_put() to release child_np in each success loop. After breaking from the loop with the child_np has been released, the code will jump to the put_child label and will call the of_node_put() again if the devm_request_threaded_irq() fails. These cause a double free bug. Fix by returning directly to avoid the duplicate of_node_put().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23030.html
  CVE-2026-23030
• https://bugzilla.suse.com/1257561
  SUSE Bug 1257561

Описание

In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak In gs_can_open(), the URBs for USB-in transfers are allocated, added to the parent->rx_submitted anchor and submitted. In the complete callback gs_usb_receive_bulk_callback(), the URB is processed and resubmitted. In gs_can_close() the URBs are freed by calling usb_kill_anchored_urbs(parent->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in gs_can_close(). Fix the memory leak by anchoring the URB in the gs_usb_receive_bulk_callback() to the parent->rx_submitted anchor.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23031.html
  CVE-2026-23031
• https://bugzilla.suse.com/1257600
  SUSE Bug 1257600

Описание

In the Linux kernel, the following vulnerability has been resolved: dmaengine: omap-dma: fix dma_pool resource leak in error paths The dma_pool created by dma_pool_create() is not destroyed when dma_async_device_register() or of_dma_controller_register() fails, causing a resource leak in the probe error paths. Add dma_pool_destroy() in both error paths to properly release the allocated dma_pool resource.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23033.html
  CVE-2026-23033
• https://bugzilla.suse.com/1257570
  SUSE Bug 1257570

Описание

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Pass netdev to mlx5e_destroy_netdev instead of priv mlx5e_priv is an unstable structure that can be memset(0) if profile attaching fails. Pass netdev to mlx5e_destroy_netdev() to guarantee it will work on a valid netdev. On mlx5e_remove: Check validity of priv->profile, before attempting to cleanup any resources that might be not there. This fixes a kernel oops in mlx5e_remove when switchdev mode fails due to change profile failure. $ devlink dev eswitch set pci/0000:00:03.0 mode switchdev Error: mlx5_core: Failed setting eswitch to offloads. dmesg: workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12 workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 $ devlink dev reload pci/0000:00:03.0 ==> oops BUG: kernel NULL pointer dereference, address: 0000000000000370 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 15 UID: 0 PID: 520 Comm: devlink Not tainted 6.18.0-rc5+ #115 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:mlx5e_dcbnl_dscp_app+0x23/0x100 RSP: 0018:ffffc9000083f8b8 EFLAGS: 00010286 RAX: ffff8881126fc380 RBX: ffff8881015ac400 RCX: ffffffff826ffc45 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881035109c0 RBP: ffff8881035109c0 R08: ffff888101e3e838 R09: ffff888100264e10 R10: ffffc9000083f898 R11: ffffc9000083f8a0 R12: ffff888101b921a0 R13: ffff888101b921a0 R14: ffff8881015ac9a0 R15: ffff8881015ac400 FS: 00007f789a3c8740(0000) GS:ffff88856aa59000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000370 CR3: 000000010b6c0001 CR4: 0000000000370ef0 Call Trace: <TASK> mlx5e_remove+0x57/0x110 device_release_driver_internal+0x19c/0x200 bus_remove_device+0xc6/0x130 device_del+0x160/0x3d0 ? devl_param_driverinit_value_get+0x2d/0x90 mlx5_detach_device+0x89/0xe0 mlx5_unload_one_devl_locked+0x3a/0x70 mlx5_devlink_reload_down+0xc8/0x220 devlink_reload+0x7d/0x260 devlink_nl_reload_doit+0x45b/0x5a0 genl_family_rcv_msg_doit+0xe8/0x140

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23035.html
  CVE-2026-23035
• https://bugzilla.suse.com/1257559
  SUSE Bug 1257559

Описание

In the Linux kernel, the following vulnerability has been resolved: can: etas_es58x: allow partial RX URB allocation to succeed When es58x_alloc_rx_urbs() fails to allocate the requested number of URBs but succeeds in allocating some, it returns an error code. This causes es58x_open() to return early, skipping the cleanup label 'free_urbs', which leads to the anchored URBs being leaked. As pointed out by maintainer Vincent Mailhol, the driver is designed to handle partial URB allocation gracefully. Therefore, partial allocation should not be treated as a fatal error. Modify es58x_alloc_rx_urbs() to return 0 if at least one URB has been allocated, restoring the intended behavior and preventing the leak in es58x_open().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23037.html
  CVE-2026-23037
• https://bugzilla.suse.com/1257554
  SUSE Bug 1257554

Описание

In the Linux kernel, the following vulnerability has been resolved: pnfs/flexfiles: Fix memory leak in nfs4_ff_alloc_deviceid_node() In nfs4_ff_alloc_deviceid_node(), if the allocation for ds_versions fails, the function jumps to the out_scratch label without freeing the already allocated dsaddrs list, leading to a memory leak. Fix this by jumping to the out_err_drain_dsaddrs label, which properly frees the dsaddrs list before cleaning up other resources.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23038.html
  CVE-2026-23038
• https://bugzilla.suse.com/1257553
  SUSE Bug 1257553

Описание

In the Linux kernel, the following vulnerability has been resolved: idpf: fix aux device unplugging when rdma is not supported by vport If vport flags do not contain VIRTCHNL2_VPORT_ENABLE_RDMA, driver does not allocate vdev_info for this vport. This leads to kernel NULL pointer dereference in idpf_idc_vport_dev_down(), which references vdev_info for every vport regardless. Check, if vdev_info was ever allocated before unplugging aux device.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23042.html
  CVE-2026-23042
• https://bugzilla.suse.com/1257705
  SUSE Bug 1257705

Описание

In the Linux kernel, the following vulnerability has been resolved: libceph: make calc_target() set t->paused, not just clear it Currently calc_target() clears t->paused if the request shouldn't be paused anymore, but doesn't ever set t->paused even though it's able to determine when the request should be paused. Setting t->paused is left to __submit_request() which is fine for regular requests but doesn't work for linger requests -- since __submit_request() doesn't operate on linger requests, there is nowhere for lreq->t.paused to be set. One consequence of this is that watches don't get reestablished on paused -> unpaused transitions in cases where requests have been paused long enough for the (paused) unwatch request to time out and for the subsequent (re)watch request to enter the paused state. On top of the watch not getting reestablished, rbd_reregister_watch() gets stuck with rbd_dev->watch_mutex held: rbd_register_watch __rbd_register_watch ceph_osdc_watch linger_reg_commit_wait It's waiting for lreq->reg_commit_wait to be completed, but for that to happen the respective request needs to end up on need_resend_linger list and be kicked when requests are unpaused. There is no chance for that if the request in question is never marked paused in the first place. The fact that rbd_dev->watch_mutex remains taken out forever then prevents the image from getting unmapped -- "rbd unmap" would inevitably hang in D state on an attempt to grab the mutex.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23047.html
  CVE-2026-23047
• https://bugzilla.suse.com/1257682
  SUSE Bug 1257682

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/panel-simple: fix connector type for DataImage SCF0700C48GGU18 panel The connector type for the DataImage SCF0700C48GGU18 panel is missing and devm_drm_panel_bridge_add() requires connector type to be set. This leads to a warning and a backtrace in the kernel log and panel does not work: " WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8 " The warning is triggered by a check for valid connector type in devm_drm_panel_bridge_add(). If there is no valid connector type set for a panel, the warning is printed and panel is not added. Fill in the missing connector type to fix the warning and make the panel operational once again.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23049.html
  CVE-2026-23049
• https://bugzilla.suse.com/1257723
  SUSE Bug 1257723

Описание

In the Linux kernel, the following vulnerability has been resolved: pNFS: Fix a deadlock when returning a delegation during open() Ben Coddington reports seeing a hang in the following stack trace: 0 [ffffd0b50e1774e0] __schedule at ffffffff9ca05415 1 [ffffd0b50e177548] schedule at ffffffff9ca05717 2 [ffffd0b50e177558] bit_wait at ffffffff9ca061e1 3 [ffffd0b50e177568] __wait_on_bit at ffffffff9ca05cfb 4 [ffffd0b50e1775c8] out_of_line_wait_on_bit at ffffffff9ca05ea5 5 [ffffd0b50e177618] pnfs_roc at ffffffffc154207b [nfsv4] 6 [ffffd0b50e1776b8] _nfs4_proc_delegreturn at ffffffffc1506586 [nfsv4] 7 [ffffd0b50e177788] nfs4_proc_delegreturn at ffffffffc1507480 [nfsv4] 8 [ffffd0b50e1777f8] nfs_do_return_delegation at ffffffffc1523e41 [nfsv4] 9 [ffffd0b50e177838] nfs_inode_set_delegation at ffffffffc1524a75 [nfsv4] 10 [ffffd0b50e177888] nfs4_process_delegation at ffffffffc14f41dd [nfsv4] 11 [ffffd0b50e1778a0] _nfs4_opendata_to_nfs4_state at ffffffffc1503edf [nfsv4] 12 [ffffd0b50e1778c0] _nfs4_open_and_get_state at ffffffffc1504e56 [nfsv4] 13 [ffffd0b50e177978] _nfs4_do_open at ffffffffc15051b8 [nfsv4] 14 [ffffd0b50e1779f8] nfs4_do_open at ffffffffc150559c [nfsv4] 15 [ffffd0b50e177a80] nfs4_atomic_open at ffffffffc15057fb [nfsv4] 16 [ffffd0b50e177ad0] nfs4_file_open at ffffffffc15219be [nfsv4] 17 [ffffd0b50e177b78] do_dentry_open at ffffffff9c09e6ea 18 [ffffd0b50e177ba8] vfs_open at ffffffff9c0a082e 19 [ffffd0b50e177bd0] dentry_open at ffffffff9c0a0935 The issue is that the delegreturn is being asked to wait for a layout return that cannot complete because a state recovery was initiated. The state recovery cannot complete until the open() finishes processing the delegations it was given. The solution is to propagate the existing flags that indicate a non-blocking call to the function pnfs_roc(), so that it knows not to wait in this situation.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23050.html
  CVE-2026-23050
• https://bugzilla.suse.com/1257688
  SUSE Bug 1257688

Описание

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix a deadlock involving nfs_release_folio() Wang Zhaolong reports a deadlock involving NFSv4.1 state recovery waiting on kthreadd, which is attempting to reclaim memory by calling nfs_release_folio(). The latter cannot make progress due to state recovery being needed. It seems that the only safe thing to do here is to kick off a writeback of the folio, without waiting for completion, or else kicking off an asynchronous commit.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23053.html
  CVE-2026-23053
• https://bugzilla.suse.com/1257718
  SUSE Bug 1257718

Описание

In the Linux kernel, the following vulnerability has been resolved: net: hv_netvsc: reject RSS hash key programming without RX indirection table RSS configuration requires a valid RX indirection table. When the device reports a single receive queue, rndis_filter_device_add() does not allocate an indirection table, accepting RSS hash key updates in this state leads to a hang. Fix this by gating netvsc_set_rxfh() on ndc->rx_table_sz and return -EOPNOTSUPP when the table is absent. This aligns set_rxfh with the device capabilities and prevents incorrect behavior.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23054.html
  CVE-2026-23054
• https://bugzilla.suse.com/1257732
  SUSE Bug 1257732

Описание

In the Linux kernel, the following vulnerability has been resolved: i2c: riic: Move suspend handling to NOIRQ phase Commit 53326135d0e0 ("i2c: riic: Add suspend/resume support") added suspend support for the Renesas I2C driver and following this change on RZ/G3E the following WARNING is seen on entering suspend ... [ 134.275704] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 134.285536] ------------[ cut here ]------------ [ 134.290298] i2c i2c-2: Transfer while suspended [ 134.295174] WARNING: drivers/i2c/i2c-core.h:56 at __i2c_smbus_xfer+0x1e4/0x214, CPU#0: systemd-sleep/388 [ 134.365507] Tainted: [W]=WARN [ 134.368485] Hardware name: Renesas SMARC EVK version 2 based on r9a09g047e57 (DT) [ 134.375961] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 134.382935] pc : __i2c_smbus_xfer+0x1e4/0x214 [ 134.387329] lr : __i2c_smbus_xfer+0x1e4/0x214 [ 134.391717] sp : ffff800083f23860 [ 134.395040] x29: ffff800083f23860 x28: 0000000000000000 x27: ffff800082ed5d60 [ 134.402226] x26: 0000001f4395fd74 x25: 0000000000000007 x24: 0000000000000001 [ 134.409408] x23: 0000000000000000 x22: 000000000000006f x21: ffff800083f23936 [ 134.416589] x20: ffff0000c090e140 x19: ffff0000c090e0d0 x18: 0000000000000006 [ 134.423771] x17: 6f63657320313030 x16: 2e30206465737061 x15: ffff800083f23280 [ 134.430953] x14: 0000000000000000 x13: ffff800082b16ce8 x12: 0000000000000f09 [ 134.438134] x11: 0000000000000503 x10: ffff800082b6ece8 x9 : ffff800082b16ce8 [ 134.445315] x8 : 00000000ffffefff x7 : ffff800082b6ece8 x6 : 80000000fffff000 [ 134.452495] x5 : 0000000000000504 x4 : 0000000000000000 x3 : 0000000000000000 [ 134.459672] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c9ee9e80 [ 134.466851] Call trace: [ 134.469311] __i2c_smbus_xfer+0x1e4/0x214 (P) [ 134.473715] i2c_smbus_xfer+0xbc/0x120 [ 134.477507] i2c_smbus_read_byte_data+0x4c/0x84 [ 134.482077] isl1208_i2c_read_time+0x44/0x178 [rtc_isl1208] [ 134.487703] isl1208_rtc_read_time+0x14/0x20 [rtc_isl1208] [ 134.493226] __rtc_read_time+0x44/0x88 [ 134.497012] rtc_read_time+0x3c/0x68 [ 134.500622] rtc_suspend+0x9c/0x170 The warning is triggered because I2C transfers can still be attempted while the controller is already suspended, due to inappropriate ordering of the system sleep callbacks. If the controller is autosuspended, there is no way to wake it up once runtime PM disabled (in suspend_late()). During system resume, the I2C controller will be available only after runtime PM is re-enabled (in resume_early()). However, this may be too late for some devices. Wake up the controller in the suspend() callback while runtime PM is still enabled. The I2C controller will remain available until the suspend_noirq() callback (pm_runtime_force_suspend()) is called. During resume, the I2C controller can be restored by the resume_noirq() callback (pm_runtime_force_resume()). Finally, the resume() callback re-enables autosuspend. As a result, the I2C controller can remain available until the system enters suspend_noirq() and from resume_noirq().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23055.html
  CVE-2026-23055
• https://bugzilla.suse.com/1257730
  SUSE Bug 1257730

Описание

In the Linux kernel, the following vulnerability has been resolved: uacce: implement mremap in uacce_vm_ops to return -EPERM The current uacce_vm_ops does not support the mremap operation of vm_operations_struct. Implement .mremap to return -EPERM to remind users. The reason we need to explicitly disable mremap is that when the driver does not implement .mremap, it uses the default mremap method. This could lead to a risk scenario: An application might first mmap address p1, then mremap to p2, followed by munmap(p1), and finally munmap(p2). Since the default mremap copies the original vma's vm_private_data (i.e., q) to the new vma, both munmap operations would trigger vma_close, causing q->qfr to be freed twice(qfr will be set to null here, so repeated release is ok).

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23056.html
  CVE-2026-23056
• https://bugzilla.suse.com/1257729
  SUSE Bug 1257729

Описание

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: Coalesce only linear skb vsock/virtio common tries to coalesce buffers in rx queue: if a linear skb (with a spare tail room) is followed by a small skb (length limited by GOOD_COPY_LEN = 128), an attempt is made to join them. Since the introduction of MSG_ZEROCOPY support, assumption that a small skb will always be linear is incorrect. In the zerocopy case, data is lost and the linear skb is appended with uninitialized kernel memory. Of all 3 supported virtio-based transports, only loopback-transport is affected. G2H virtio-transport rx queue operates on explicitly linear skbs; see virtio_vsock_alloc_linear_skb() in virtio_vsock_rx_fill(). H2G vhost-transport may allocate non-linear skbs, but only for sizes that are not considered for coalescence; see PAGE_ALLOC_COSTLY_ORDER in virtio_vsock_alloc_skb(). Ensure only linear skbs are coalesced. Note that skb_tailroom(last_skb) > 0 guarantees last_skb is linear.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23057.html
  CVE-2026-23057
• https://bugzilla.suse.com/1257740
  SUSE Bug 1257740

Описание

In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: ems_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In ems_usb_open(), the URBs for USB-in transfers are allocated, added to the dev->rx_submitted anchor and submitted. In the complete callback ems_usb_read_bulk_callback(), the URBs are processed and resubmitted. In ems_usb_close() the URBs are freed by calling usb_kill_anchored_urbs(&dev->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in ems_usb_close(). Fix the memory leak by anchoring the URB in the ems_usb_read_bulk_callback() to the dev->rx_submitted anchor.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23058.html
  CVE-2026-23058
• https://bugzilla.suse.com/1257739
  SUSE Bug 1257739

Описание

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Sanitize payload size to prevent member overflow In qla27xx_copy_fpin_pkt() and qla27xx_copy_multiple_pkt(), the frame_size reported by firmware is used to calculate the copy length into item->iocb. However, the iocb member is defined as a fixed-size 64-byte array within struct purex_item. If the reported frame_size exceeds 64 bytes, subsequent memcpy calls will overflow the iocb member boundary. While extra memory might be allocated, this cross-member write is unsafe and triggers warnings under CONFIG_FORTIFY_SOURCE. Fix this by capping total_bytes to the size of the iocb member (64 bytes) before allocation and copying. This ensures all copies remain within the bounds of the destination structure member.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23059.html
  CVE-2026-23059
• https://bugzilla.suse.com/1257737
  SUSE Bug 1257737

Описание

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject too-short AAD (assoclen<8) to match ESP/ESN spec authencesn assumes an ESP/ESN-formatted AAD. When assoclen is shorter than the minimum expected length, crypto_authenc_esn_decrypt() can advance past the end of the destination scatterlist and trigger a NULL pointer dereference in scatterwalk_map_and_copy(), leading to a kernel panic (DoS). Add a minimum AAD length check to fail fast on invalid inputs.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23060.html
  CVE-2026-23060
• https://bugzilla.suse.com/1257735
  SUSE Bug 1257735

Описание

In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb: kvaser_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In kvaser_usb_set_{,data_}bittiming() -> kvaser_usb_setup_rx_urbs(), the URBs for USB-in transfers are allocated, added to the dev->rx_submitted anchor and submitted. In the complete callback kvaser_usb_read_bulk_callback(), the URBs are processed and resubmitted. In kvaser_usb_remove_interfaces() the URBs are freed by calling usb_kill_anchored_urbs(&dev->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the kvaser_usb_read_bulk_callback() to the dev->rx_submitted anchor.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23061.html
  CVE-2026-23061
• https://bugzilla.suse.com/1257776
  SUSE Bug 1257776

Описание

In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs attributes: 1. Off-by-one error: The loop condition used '<=' instead of '<', causing access beyond array bounds. Since array indices are 0-based and go from 0 to instances_count-1, the loop should use '<'. 2. Missing NULL check: The code dereferenced attr_name_kobj->name without checking if attr_name_kobj was NULL, causing a null pointer dereference in min_length_show() and other attribute show functions. The panic occurred when fwupd tried to read BIOS configuration attributes: Oops: general protection fault [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg] Add a NULL check for attr_name_kobj before dereferencing and corrects the loop boundary to match the pattern used elsewhere in the driver.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23062.html
  CVE-2026-23062
• https://bugzilla.suse.com/1257734
  SUSE Bug 1257734

Описание

In the Linux kernel, the following vulnerability has been resolved: uacce: ensure safe queue release with state management Directly calling `put_queue` carries risks since it cannot guarantee that resources of `uacce_queue` have been fully released beforehand. So adding a `stop_queue` operation for the UACCE_CMD_PUT_Q command and leaving the `put_queue` operation to the final resource release ensures safety. Queue states are defined as follows: - UACCE_Q_ZOMBIE: Initial state - UACCE_Q_INIT: After opening `uacce` - UACCE_Q_STARTED: After `start` is issued via `ioctl` When executing `poweroff -f` in virt while accelerator are still working, `uacce_fops_release` and `uacce_remove` may execute concurrently. This can cause `uacce_put_queue` within `uacce_fops_release` to access a NULL `ops` pointer. Therefore, add state checks to prevent accessing freed pointers.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23063.html
  CVE-2026-23063
• https://bugzilla.suse.com/1257722
  SUSE Bug 1257722

Описание

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: avoid possible NULL deref tcf_ife_encode() must make sure ife_encode() does not return NULL. syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:ife_tlv_meta_encode+0x41/0xa0 net/ife/ife.c:166 CPU: 3 UID: 0 PID: 8990 Comm: syz.0.696 Not tainted syzkaller #0 PREEMPT(full) Call Trace: <TASK> ife_encode_meta_u32+0x153/0x180 net/sched/act_ife.c:101 tcf_ife_encode net/sched/act_ife.c:841 [inline] tcf_ife_act+0x1022/0x1de0 net/sched/act_ife.c:877 tc_act include/net/tc_wrapper.h:130 [inline] tcf_action_exec+0x1c0/0xa20 net/sched/act_api.c:1152 tcf_exts_exec include/net/pkt_cls.h:349 [inline] mall_classify+0x1a0/0x2a0 net/sched/cls_matchall.c:42 tc_classify include/net/tc_wrapper.h:197 [inline] __tcf_classify net/sched/cls_api.c:1764 [inline] tcf_classify+0x7f2/0x1380 net/sched/cls_api.c:1860 multiq_classify net/sched/sch_multiq.c:39 [inline] multiq_enqueue+0xe0/0x510 net/sched/sch_multiq.c:66 dev_qdisc_enqueue+0x45/0x250 net/core/dev.c:4147 __dev_xmit_skb net/core/dev.c:4262 [inline] __dev_queue_xmit+0x2998/0x46c0 net/core/dev.c:4798

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23064.html
  CVE-2026-23064
• https://bugzilla.suse.com/1257765
  SUSE Bug 1257765

Описание

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: Fix memory leak in wbrf_record() The tmp buffer is allocated using kcalloc() but is not freed if acpi_evaluate_dsm() fails. This causes a memory leak in the error path. Fix this by explicitly freeing the tmp buffer in the error handling path of acpi_evaluate_dsm().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23065.html
  CVE-2026-23065
• https://bugzilla.suse.com/1257742
  SUSE Bug 1257742

Описание

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recvmsg() unconditional requeue If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at the front of the recvmsg queue already has its mutex locked, it requeues the call - whether or not the call is already queued. The call may be on the queue because MSG_PEEK was also passed and so the call was not dequeued or because the I/O thread requeued it. The unconditional requeue may then corrupt the recvmsg queue, leading to things like UAFs or refcount underruns. Fix this by only requeuing the call if it isn't already on the queue - and moving it to the front if it is already queued. If we don't queue it, we have to put the ref we obtained by dequeuing it. Also, MSG_PEEK doesn't dequeue the call so shouldn't call rxrpc_notify_socket() for the call if we didn't use up all the data on the queue, so fix that also.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23066.html
  CVE-2026-23066
• https://bugzilla.suse.com/1257726
  SUSE Bug 1257726
• https://bugzilla.suse.com/1257728
  SUSE Bug 1257728

Описание

In the Linux kernel, the following vulnerability has been resolved: spi: spi-sprd-adi: Fix double free in probe error path The driver currently uses spi_alloc_host() to allocate the controller but registers it using devm_spi_register_controller(). If devm_register_restart_handler() fails, the code jumps to the put_ctlr label and calls spi_controller_put(). However, since the controller was registered via a devm function, the device core will automatically call spi_controller_put() again when the probe fails. This results in a double-free of the spi_controller structure. Fix this by switching to devm_spi_alloc_host() and removing the manual spi_controller_put() call.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23068.html
  CVE-2026-23068
• https://bugzilla.suse.com/1257805
  SUSE Bug 1257805

Описание

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix potential underflow in virtio_transport_get_credit() The credit calculation in virtio_transport_get_credit() uses unsigned arithmetic: ret = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt); If the peer shrinks its advertised buffer (peer_buf_alloc) while bytes are in flight, the subtraction can underflow and produce a large positive value, potentially allowing more data to be queued than the peer can handle. Reuse virtio_transport_has_space() which already handles this case and add a comment to make it clear why we are doing that. [Stefano: use virtio_transport_has_space() instead of duplicating the code] [Stefano: tweak the commit message]

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23069.html
  CVE-2026-23069
• https://bugzilla.suse.com/1257755
  SUSE Bug 1257755

Описание

In the Linux kernel, the following vulnerability has been resolved: Octeontx2-af: Add proper checks for fwdata firmware populates MAC address, link modes (supported, advertised) and EEPROM data in shared firmware structure which kernel access via MAC block(CGX/RPM). Accessing fwdata, on boards booted with out MAC block leading to kernel panics. Internal error: Oops: 0000000096000005 [#1] SMP [ 10.460721] Modules linked in: [ 10.463779] CPU: 0 UID: 0 PID: 174 Comm: kworker/0:3 Not tainted 6.19.0-rc5-00154-g76ec646abdf7-dirty #3 PREEMPT [ 10.474045] Hardware name: Marvell OcteonTX CN98XX board (DT) [ 10.479793] Workqueue: events work_for_cpu_fn [ 10.484159] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 10.491124] pc : rvu_sdp_init+0x18/0x114 [ 10.495051] lr : rvu_probe+0xe58/0x1d18

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23070.html
  CVE-2026-23070
• https://bugzilla.suse.com/1257709
  SUSE Bug 1257709

Описание

In the Linux kernel, the following vulnerability has been resolved: regmap: Fix race condition in hwspinlock irqsave routine Previously, the address of the shared member '&map->spinlock_flags' was passed directly to 'hwspin_lock_timeout_irqsave'. This creates a race condition where multiple contexts contending for the lock could overwrite the shared flags variable, potentially corrupting the state for the current lock owner. Fix this by using a local stack variable 'flags' to store the IRQ state temporarily.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23071.html
  CVE-2026-23071
• https://bugzilla.suse.com/1257706
  SUSE Bug 1257706

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: Fix memory corruption due to not set vif driver data size The struct ieee80211_vif contains trailing space for vif driver data, when struct ieee80211_vif is allocated, the total memory size that is allocated is sizeof(struct ieee80211_vif) + size of vif driver data. The size of vif driver data is set by each WiFi driver as needed. The RSI911x driver does not set vif driver data size, no trailing space for vif driver data is therefore allocated past struct ieee80211_vif . The RSI911x driver does however use the vif driver data to store its vif driver data structure "struct vif_priv". An access to vif->drv_priv leads to access out of struct ieee80211_vif bounds and corruption of some memory. In case of the failure observed locally, rsi_mac80211_add_interface() would write struct vif_priv *vif_info = (struct vif_priv *)vif->drv_priv; vif_info->vap_id = vap_idx. This write corrupts struct fq_tin member struct list_head new_flows . The flow = list_first_entry(head, struct fq_flow, flowchain); in fq_tin_reset() then reports non-NULL bogus address, which when accessed causes a crash. The trigger is very simple, boot the machine with init=/bin/sh , mount devtmpfs, sysfs, procfs, and then do "ip link set wlan0 up", "sleep 1", "ip link set wlan0 down" and the crash occurs. Fix this by setting the correct size of vif driver data, which is the size of "struct vif_priv", so that memory is allocated and the driver can store its driver data in it, instead of corrupting memory around it.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23073.html
  CVE-2026-23073
• https://bugzilla.suse.com/1257707
  SUSE Bug 1257707

Описание

In the Linux kernel, the following vulnerability has been resolved: net/sched: Enforce that teql can only be used as root qdisc Design intent of teql is that it is only supposed to be used as root qdisc. We need to check for that constraint. Although not important, I will describe the scenario that unearthed this issue for the curious. GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows: ROOT qdisc 1:0 (QFQ) ├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s ── class 1:2 (weight=1, lmax=1514) teql GangMin sends a packet which is enqueued to 1:1 (netem). Any invocation of dequeue by QFQ from this class will not return a packet until after 6.4s. In the meantime, a second packet is sent and it lands on 1:2. teql's enqueue will return success and this will activate class 1:2. Main issue is that teql only updates the parent visible qlen (sch->q.qlen) at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's peek always returns NULL), dequeue will never be called and thus the qlen will remain as 0. With that in mind, when GangMin updates 1:2's lmax value, the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's qlen was not incremented, qfq fails to deactivate the class, but still frees its pointers from the aggregate. So when the first packet is rescheduled after 6.4 seconds (netem's delay), a dangling pointer is accessed causing GangMin's causing a UAF.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23074.html
  CVE-2026-23074
• https://bugzilla.suse.com/1257749
  SUSE Bug 1257749

Описание

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix potential OOB access in audio mixer handling In the audio mixer handling code of ctxfi driver, the conf field is used as a kind of loop index, and it's referred in the index callbacks (amixer_index() and sum_index()). As spotted recently by fuzzers, the current code causes OOB access at those functions. | UBSAN: array-index-out-of-bounds in /build/reproducible-path/linux-6.17.8/sound/pci/ctxfi/ctamixer.c:347:48 | index 8 is out of range for type 'unsigned char [8]' After the analysis, the cause was found to be the lack of the proper (re-)initialization of conj field. This patch addresses those OOB accesses by adding the proper initializations of the loop indices.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23076.html
  CVE-2026-23076
• https://bugzilla.suse.com/1257788
  SUSE Bug 1257788

Описание

In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Fix buffer overflow in config retrieval The scarlett2_usb_get_config() function has a logic error in the endianness conversion code that can cause buffer overflows when count > 1. The code checks `if (size == 2)` where `size` is the total buffer size in bytes, then loops `count` times treating each element as u16 (2 bytes). This causes the loop to access `count * 2` bytes when the buffer only has `size` bytes allocated. Fix by checking the element size (config_item->size) instead of the total buffer size. This ensures the endianness conversion matches the actual element type.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23078.html
  CVE-2026-23078
• https://bugzilla.suse.com/1257789
  SUSE Bug 1257789

Описание

In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In mcba_usb_probe() -> mcba_usb_start(), the URBs for USB-in transfers are allocated, added to the priv->rx_submitted anchor and submitted. In the complete callback mcba_usb_read_bulk_callback(), the URBs are processed and resubmitted. In mcba_usb_close() -> mcba_urb_unlink() the URBs are freed by calling usb_kill_anchored_urbs(&priv->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the mcba_usb_read_bulk_callback()to the priv->rx_submitted anchor.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23080.html
  CVE-2026-23080
• https://bugzilla.suse.com/1257714
  SUSE Bug 1257714

Описание

In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error In commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"), the URB was re-anchored before usb_submit_urb() in gs_usb_receive_bulk_callback() to prevent a leak of this URB during cleanup. However, this patch did not take into account that usb_submit_urb() could fail. The URB remains anchored and usb_kill_anchored_urbs(&parent->rx_submitted) in gs_can_close() loops infinitely since the anchor list never becomes empty. To fix the bug, unanchor the URB when an usb_submit_urb() error occurs, also print an info message.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23082.html
  CVE-2026-23082
• https://bugzilla.suse.com/1257715
  SUSE Bug 1257715

Описание

In the Linux kernel, the following vulnerability has been resolved: fou: Don't allow 0 for FOU_ATTR_IPPROTO. fou_udp_recv() has the same problem mentioned in the previous patch. If FOU_ATTR_IPPROTO is set to 0, skb is not freed by fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu(). Let's forbid 0 for FOU_ATTR_IPPROTO.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23083.html
  CVE-2026-23083
• https://bugzilla.suse.com/1257745
  SUSE Bug 1257745

Описание

In the Linux kernel, the following vulnerability has been resolved: be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is set to false, the driver may request the PMAC_ID from the firmware of the network card, and this function will store that PMAC_ID at the provided address pmac_id. This is the contract of this function. However, there is a location within the driver where both pmac_id_valid == false and pmac_id == NULL are being passed. This could result in dereferencing a NULL pointer. To resolve this issue, it is necessary to pass the address of a stub variable to the function.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23084.html
  CVE-2026-23084
• https://bugzilla.suse.com/1257830
  SUSE Bug 1257830

Описание

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Avoid truncating memory addresses On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem allocations to be backed by addresses physical memory above the 32-bit address limit, as found while experimenting with larger VMSPLIT configurations. This caused the qemu virt model to crash in the GICv3 driver, which allocates the 'itt' object using GFP_KERNEL. Since all memory below the 4GB physical address limit is in ZONE_DMA in this configuration, kmalloc() defaults to higher addresses for ZONE_NORMAL, and the ITS driver stores the physical address in a 32-bit 'unsigned long' variable. Change the itt_addr variable to the correct phys_addr_t type instead, along with all other variables in this driver that hold a physical address. The gicv5 driver correctly uses u64 variables, while all other irqchip drivers don't call virt_to_phys or similar interfaces. It's expected that other device drivers have similar issues, but fixing this one is sufficient for booting a virtio based guest.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23085.html
  CVE-2026-23085
• https://bugzilla.suse.com/1257758
  SUSE Bug 1257758

Описание

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: cap TX credit to local buffer size The virtio transports derives its TX credit directly from peer_buf_alloc, which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value. On the host side this means that the amount of data we are willing to queue for a connection is scaled by a guest-chosen buffer size, rather than the host's own vsock configuration. A malicious guest can advertise a large buffer and read slowly, causing the host to allocate a correspondingly large amount of sk_buff memory. The same thing would happen in the guest with a malicious host, since virtio transports share the same code base. Introduce a small helper, virtio_transport_tx_buf_size(), that returns min(peer_buf_alloc, buf_alloc), and use it wherever we consume peer_buf_alloc. This ensures the effective TX window is bounded by both the peer's advertised buffer and our own buf_alloc (already clamped to buffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peer cannot force the other to queue more data than allowed by its own vsock settings. On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with 32 guest vsock connections advertising 2 GiB each and reading slowly drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only recovered after killing the QEMU process. That said, if QEMU memory is limited with cgroups, the maximum memory used will be limited. With this patch applied: Before: MemFree: ~61.6 GiB Slab: ~142 MiB SUnreclaim: ~117 MiB After 32 high-credit connections: MemFree: ~61.5 GiB Slab: ~178 MiB SUnreclaim: ~152 MiB Only ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guest remains responsive. Compatibility with non-virtio transports: - VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per socket based on the local vsk->buffer_* values; the remote side cannot enlarge those queues beyond what the local endpoint configured. - Hyper-V's vsock transport uses fixed-size VMBus ring buffers and an MTU bound; there is no peer-controlled credit field comparable to peer_buf_alloc, and the remote endpoint cannot drive in-flight kernel memory above those ring sizes. - The loopback path reuses virtio_transport_common.c, so it naturally follows the same semantics as the virtio transport. This change is limited to virtio_transport_common.c and thus affects virtio-vsock, vhost-vsock, and loopback, bringing them in line with the "remote window intersected with local policy" behaviour that VMCI and Hyper-V already effectively have. [Stefano: small adjustments after changing the previous patch] [Stefano: tweak the commit message]

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23086.html
  CVE-2026-23086
• https://bugzilla.suse.com/1257757
  SUSE Bug 1257757

Описание

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash on synthetic stacktrace field usage When creating a synthetic event based on an existing synthetic event that had a stacktrace field and the new synthetic event used that field a kernel crash occurred: ~# cd /sys/kernel/tracing ~# echo 's:stack unsigned long stack[];' > dynamic_events ~# echo 'hist:keys=prev_pid:s0=common_stacktrace if prev_state & 3' >> events/sched/sched_switch/trigger ~# echo 'hist:keys=next_pid:s1=$s0:onmatch(sched.sched_switch).trace(stack,$s1)' >> events/sched/sched_switch/trigger The above creates a synthetic event that takes a stacktrace when a task schedules out in a non-running state and passes that stacktrace to the sched_switch event when that task schedules back in. It triggers the "stack" synthetic event that has a stacktrace as its field (called "stack"). ~# echo 's:syscall_stack s64 id; unsigned long stack[];' >> dynamic_events ~# echo 'hist:keys=common_pid:s2=stack' >> events/synthetic/stack/trigger ~# echo 'hist:keys=common_pid:s3=$s2,i0=id:onmatch(synthetic.stack).trace(syscall_stack,$i0,$s3)' >> events/raw_syscalls/sys_exit/trigger The above makes another synthetic event called "syscall_stack" that attaches the first synthetic event (stack) to the sys_exit trace event and records the stacktrace from the stack event with the id of the system call that is exiting. When enabling this event (or using it in a historgram): ~# echo 1 > events/synthetic/syscall_stack/enable Produces a kernel crash! BUG: unable to handle page fault for address: 0000000000400010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 6 UID: 0 PID: 1257 Comm: bash Not tainted 6.16.3+deb14-amd64 #1 PREEMPT(lazy) Debian 6.16.3-1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:trace_event_raw_event_synth+0x90/0x380 Code: c5 00 00 00 00 85 d2 0f 84 e1 00 00 00 31 db eb 34 0f 1f 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 <49> 8b 04 24 48 83 c3 01 8d 0c c5 08 00 00 00 01 cd 41 3b 5d 40 0f RSP: 0018:ffffd2670388f958 EFLAGS: 00010202 RAX: ffff8ba1065cc100 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: fffff266ffda7b90 RDI: ffffd2670388f9b0 RBP: 0000000000000010 R08: ffff8ba104e76000 R09: ffffd2670388fa50 R10: ffff8ba102dd42e0 R11: ffffffff9a908970 R12: 0000000000400010 R13: ffff8ba10a246400 R14: ffff8ba10a710220 R15: fffff266ffda7b90 FS: 00007fa3bc63f740(0000) GS:ffff8ba2e0f48000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000400010 CR3: 0000000107f9e003 CR4: 0000000000172ef0 Call Trace: <TASK> ? __tracing_map_insert+0x208/0x3a0 action_trace+0x67/0x70 event_hist_trigger+0x633/0x6d0 event_triggers_call+0x82/0x130 trace_event_buffer_commit+0x19d/0x250 trace_event_raw_event_sys_exit+0x62/0xb0 syscall_exit_work+0x9d/0x140 do_syscall_64+0x20a/0x2f0 ? trace_event_raw_event_sched_switch+0x12b/0x170 ? save_fpregs_to_fpstate+0x3e/0x90 ? _raw_spin_unlock+0xe/0x30 ? finish_task_switch.isra.0+0x97/0x2c0 ? __rseq_handle_notify_resume+0xad/0x4c0 ? __schedule+0x4b8/0xd00 ? restore_fpregs_from_fpstate+0x3c/0x90 ? switch_fpu_return+0x5b/0xe0 ? do_syscall_64+0x1ef/0x2f0 ? do_fault+0x2e9/0x540 ? __handle_mm_fault+0x7d1/0xf70 ? count_memcg_events+0x167/0x1d0 ? handle_mm_fault+0x1d7/0x2e0 ? do_user_addr_fault+0x2c3/0x7f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The reason is that the stacktrace field is not labeled as such, and is treated as a normal field and not as a dynamic event that it is. In trace_event_raw_event_synth() the event is field is still treated as a dynamic array, but the retrieval of the data is considered a normal field, and the reference is just the meta data: // Meta data is retrieved instead of a dynamic array ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23088.html
  CVE-2026-23088
• https://bugzilla.suse.com/1257814
  SUSE Bug 1257814

Описание

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix use-after-free in snd_usb_mixer_free() When snd_usb_create_mixer() fails, snd_usb_mixer_free() frees mixer->id_elems but the controls already added to the card still reference the freed memory. Later when snd_card_register() runs, the OSS mixer layer calls their callbacks and hits a use-after-free read. Call trace: get_ctl_value+0x63f/0x820 sound/usb/mixer.c:411 get_min_max_with_quirks.isra.0+0x240/0x1f40 sound/usb/mixer.c:1241 mixer_ctl_feature_info+0x26b/0x490 sound/usb/mixer.c:1381 snd_mixer_oss_build_test+0x174/0x3a0 sound/core/oss/mixer_oss.c:887 ... snd_card_register+0x4ed/0x6d0 sound/core/init.c:923 usb_audio_probe+0x5ef/0x2a90 sound/usb/card.c:1025 Fix by calling snd_ctl_remove() for all mixer controls before freeing id_elems. We save the next pointer first because snd_ctl_remove() frees the current element.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23089.html
  CVE-2026-23089
• https://bugzilla.suse.com/1257790
  SUSE Bug 1257790

Описание

In the Linux kernel, the following vulnerability has been resolved: slimbus: core: fix device reference leak on report present Slimbus devices can be allocated dynamically upon reception of report-present messages. Make sure to drop the reference taken when looking up already registered devices. Note that this requires taking an extra reference in case the device has not yet been registered and has to be allocated.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23090.html
  CVE-2026-23090
• https://bugzilla.suse.com/1257759
  SUSE Bug 1257759

Описание

In the Linux kernel, the following vulnerability has been resolved: intel_th: fix device leak on output open() Make sure to drop the reference taken when looking up the th device during output device open() on errors and on close(). Note that a recent commit fixed the leak in a couple of open() error paths but not all of them, and the reference is still leaking on successful open().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23091.html
  CVE-2026-23091
• https://bugzilla.suse.com/1257813
  SUSE Bug 1257813

Описание

In the Linux kernel, the following vulnerability has been resolved: uacce: fix isolate sysfs check condition uacce supports the device isolation feature. If the driver implements the isolate_err_threshold_read and isolate_err_threshold_write callback functions, uacce will create sysfs files now. Users can read and configure the isolation policy through sysfs. Currently, sysfs files are created as long as either isolate_err_threshold_read or isolate_err_threshold_write callback functions are present. However, accessing a non-existent callback function may cause the system to crash. Therefore, intercept the creation of sysfs if neither read nor write exists; create sysfs if either is supported, but intercept unsupported operations at the call site.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23094.html
  CVE-2026-23094
• https://bugzilla.suse.com/1257811
  SUSE Bug 1257811

Описание

In the Linux kernel, the following vulnerability has been resolved: gue: Fix skb memleak with inner IP protocol 0. syzbot reported skb memleak below. [0] The repro generated a GUE packet with its inner protocol 0. gue_udp_recv() returns -guehdr->proto_ctype for "resubmit" in ip_protocol_deliver_rcu(), but this only works with non-zero protocol number. Let's drop such packets. Note that 0 is a valid number (IPv6 Hop-by-Hop Option). I think it is not practical to encap HOPOPT in GUE, so once someone starts to complain, we could pass down a resubmit flag pointer to distinguish two zeros from the upper layer: * no error * resubmit HOPOPT [0] BUG: memory leak unreferenced object 0xffff888109695a00 (size 240): comm "syz.0.17", pid 6088, jiffies 4294943096 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 40 c2 10 81 88 ff ff 00 00 00 00 00 00 00 00 .@.............. backtrace (crc a84b336f): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x3b4/0x590 mm/slub.c:5270 __build_skb+0x23/0x60 net/core/skbuff.c:474 build_skb+0x20/0x190 net/core/skbuff.c:490 __tun_build_skb drivers/net/tun.c:1541 [inline] tun_build_skb+0x4a1/0xa40 drivers/net/tun.c:1636 tun_get_user+0xc12/0x2030 drivers/net/tun.c:1770 tun_chr_write_iter+0x71/0x120 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x45d/0x710 fs/read_write.c:686 ksys_write+0xa7/0x170 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23095.html
  CVE-2026-23095
• https://bugzilla.suse.com/1257808
  SUSE Bug 1257808

Описание

In the Linux kernel, the following vulnerability has been resolved: uacce: fix cdev handling in the cleanup path When cdev_device_add fails, it internally releases the cdev memory, and if cdev_device_del is then executed, it will cause a hang error. To fix it, we check the return value of cdev_device_add() and clear uacce->cdev to avoid calling cdev_device_del in the uacce_remove.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23096.html
  CVE-2026-23096
• https://bugzilla.suse.com/1257809
  SUSE Bug 1257809

Описание

In the Linux kernel, the following vulnerability has been resolved: migrate: correct lock ordering for hugetlb file folios Syzbot has found a deadlock (analyzed by Lance Yang): 1) Task (5749): Holds folio_lock, then tries to acquire i_mmap_rwsem(read lock). 2) Task (5754): Holds i_mmap_rwsem(write lock), then tries to acquire folio_lock. migrate_pages() -> migrate_hugetlbs() -> unmap_and_move_huge_page() <- Takes folio_lock! -> remove_migration_ptes() -> __rmap_walk_file() -> i_mmap_lock_read() <- Waits for i_mmap_rwsem(read lock)! hugetlbfs_fallocate() -> hugetlbfs_punch_hole() <- Takes i_mmap_rwsem(write lock)! -> hugetlbfs_zero_partial_page() -> filemap_lock_hugetlb_folio() -> filemap_lock_folio() -> __filemap_get_folio <- Waits for folio_lock! The migration path is the one taking locks in the wrong order according to the documentation at the top of mm/rmap.c. So expand the scope of the existing i_mmap_lock to cover the calls to remove_migration_ptes() too. This is (mostly) how it used to be after commit c0d0381ade79. That was removed by 336bf30eb765 for both file & anon hugetlb pages when it should only have been removed for anon hugetlb pages.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23097.html
  CVE-2026-23097
• https://bugzilla.suse.com/1257815
  SUSE Bug 1257815

Описание

In the Linux kernel, the following vulnerability has been resolved: bonding: limit BOND_MODE_8023AD to Ethernet devices BOND_MODE_8023AD makes sense for ARPHRD_ETHER only. syzbot reported: BUG: KASAN: global-out-of-bounds in __hw_addr_create net/core/dev_addr_lists.c:63 [inline] BUG: KASAN: global-out-of-bounds in __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118 Read of size 16 at addr ffffffff8bf94040 by task syz.1.3580/19497 CPU: 1 UID: 0 PID: 19497 Comm: syz.1.3580 Tainted: G L syzkaller #0 PREEMPT(full) Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:-1 [inline] kasan_check_range+0x2b0/0x2c0 mm/kasan/generic.c:200 __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105 __hw_addr_create net/core/dev_addr_lists.c:63 [inline] __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118 __dev_mc_add net/core/dev_addr_lists.c:868 [inline] dev_mc_add+0xa1/0x120 net/core/dev_addr_lists.c:886 bond_enslave+0x2b8b/0x3ac0 drivers/net/bonding/bond_main.c:2180 do_set_master+0x533/0x6d0 net/core/rtnetlink.c:2963 do_setlink+0xcf0/0x41c0 net/core/rtnetlink.c:3165 rtnl_changelink net/core/rtnetlink.c:3776 [inline] __rtnl_newlink net/core/rtnetlink.c:3935 [inline] rtnl_newlink+0x161c/0x1c90 net/core/rtnetlink.c:4072 rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6958 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x82f/0x9e0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0x21c/0x270 net/socket.c:742 ____sys_sendmsg+0x505/0x820 net/socket.c:2592 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2646 __sys_sendmsg+0x164/0x220 net/socket.c:2678 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0x1dc/0x560 arch/x86/entry/syscall_32.c:307 do_fast_syscall_32+0x34/0x80 arch/x86/entry/syscall_32.c:332 entry_SYSENTER_compat_after_hwframe+0x84/0x8e </TASK> The buggy address belongs to the variable: lacpdu_mcast_addr+0x0/0x40

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23099.html
  CVE-2026-23099
• https://bugzilla.suse.com/1257816
  SUSE Bug 1257816

Описание

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb_pmd_shared() Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using mmu_gather)", v3. One functional fix, one performance regression fix, and two related comment fixes. I cleaned up my prototype I recently shared [1] for the performance fix, deferring most of the cleanups I had in the prototype to a later point. While doing that I identified the other things. The goal of this patch set is to be backported to stable trees "fairly" easily. At least patch #1 and #4. Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing Patch #2 + #3 are simple comment fixes that patch #4 interacts with. Patch #4 is a fix for the reported performance regression due to excessive IPI broadcasts during fork()+exit(). The last patch is all about TLB flushes, IPIs and mmu_gather. Read: complicated There are plenty of cleanups in the future to be had + one reasonable optimization on x86. But that's all out of scope for this series. Runtime tested, with a focus on fixing the performance regression using the original reproducer [2] on x86. This patch (of 4): We switched from (wrongly) using the page count to an independent shared count. Now, shared page tables have a refcount of 1 (excluding speculative references) and instead use ptdesc->pt_share_count to identify sharing. We didn't convert hugetlb_pmd_shared(), so right now, we would never detect a shared PMD table as such, because sharing/unsharing no longer touches the refcount of a PMD table. Page migration, like mbind() or migrate_pages() would allow for migrating folios mapped into such shared PMD tables, even though the folios are not exclusive. In smaps we would account them as "private" although they are "shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the pagemap interface. Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23100.html
  CVE-2026-23100
• https://bugzilla.suse.com/1257817
  SUSE Bug 1257817

Описание

In the Linux kernel, the following vulnerability has been resolved: leds: led-class: Only Add LED to leds_list when it is fully ready Before this change the LED was added to leds_list before led_init_core() gets called adding it the list before led_classdev.set_brightness_work gets initialized. This leaves a window where led_trigger_register() of a LED's default trigger will call led_trigger_set() which calls led_set_brightness() which in turn will end up queueing the *uninitialized* led_classdev.set_brightness_work. This race gets hit by the lenovo-thinkpad-t14s EC driver which registers 2 LEDs with a default trigger provided by snd_ctl_led.ko in quick succession. The first led_classdev_register() causes an async modprobe of snd_ctl_led to run and that async modprobe manages to exactly hit the window where the second LED is on the leds_list without led_init_core() being called for it, resulting in: ------------[ cut here ]------------ WARNING: CPU: 11 PID: 5608 at kernel/workqueue.c:4234 __flush_work+0x344/0x390 Hardware name: LENOVO 21N2S01F0B/21N2S01F0B, BIOS N42ET93W (2.23 ) 09/01/2025 ... Call trace: __flush_work+0x344/0x390 (P) flush_work+0x2c/0x50 led_trigger_set+0x1c8/0x340 led_trigger_register+0x17c/0x1c0 led_trigger_register_simple+0x84/0xe8 snd_ctl_led_init+0x40/0xf88 [snd_ctl_led] do_one_initcall+0x5c/0x318 do_init_module+0x9c/0x2b8 load_module+0x7e0/0x998 Close the race window by moving the adding of the LED to leds_list to after the led_init_core() call.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23101.html
  CVE-2026-23101
• https://bugzilla.suse.com/1257768
  SUSE Bug 1257768

Описание

In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: signal: Fix restoration of SVE context When SME is supported, Restoring SVE signal context can go wrong in a few ways, including placing the task into an invalid state where the kernel may read from out-of-bounds memory (and may potentially take a fatal fault) and/or may kill the task with a SIGKILL. (1) Restoring a context with SVE_SIG_FLAG_SM set can place the task into an invalid state where SVCR.SM is set (and sve_state is non-NULL) but TIF_SME is clear, consequently resuting in out-of-bounds memory reads and/or killing the task with SIGKILL. This can only occur in unusual (but legitimate) cases where the SVE signal context has either been modified by userspace or was saved in the context of another task (e.g. as with CRIU), as otherwise the presence of an SVE signal context with SVE_SIG_FLAG_SM implies that TIF_SME is already set. While in this state, task_fpsimd_load() will NOT configure SMCR_ELx (leaving some arbitrary value configured in hardware) before restoring SVCR and attempting to restore the streaming mode SVE registers from memory via sve_load_state(). As the value of SMCR_ELx.LEN may be larger than the task's streaming SVE vector length, this may read memory outside of the task's allocated sve_state, reading unrelated data and/or triggering a fault. While this can result in secrets being loaded into streaming SVE registers, these values are never exposed. As TIF_SME is clear, fpsimd_bind_task_to_cpu() will configure CPACR_ELx.SMEN to trap EL0 accesses to streaming mode SVE registers, so these cannot be accessed directly at EL0. As fpsimd_save_user_state() verifies the live vector length before saving (S)SVE state to memory, no secret values can be saved back to memory (and hence cannot be observed via ptrace, signals, etc). When the live vector length doesn't match the expected vector length for the task, fpsimd_save_user_state() will send a fatal SIGKILL signal to the task. Hence the task may be killed after executing userspace for some period of time. (2) Restoring a context with SVE_SIG_FLAG_SM clear does not clear the task's SVCR.SM. If SVCR.SM was set prior to restoring the context, then the task will be left in streaming mode unexpectedly, and some register state will be combined inconsistently, though the task will be left in legitimate state from the kernel's PoV. This can only occur in unusual (but legitimate) cases where ptrace has been used to set SVCR.SM after entry to the sigreturn syscall, as syscall entry clears SVCR.SM. In these cases, the the provided SVE register data will be loaded into the task's sve_state using the non-streaming SVE vector length and the FPSIMD registers will be merged into this using the streaming SVE vector length. Fix (1) by setting TIF_SME when setting SVCR.SM. This also requires ensuring that the task's sme_state has been allocated, but as this could contain live ZA state, it should not be zeroed. Fix (2) by clearing SVCR.SM when restoring a SVE signal context with SVE_SIG_FLAG_SM clear. For consistency, I've pulled the manipulation of SVCR, TIF_SVE, TIF_SME, and fp_type earlier, immediately after the allocation of sve_state/sme_state, before the restore of the actual register state. This makes it easier to ensure that these are always modified consistently, even if a fault is taken while reading the register data from the signal context. I do not expect any software to depend on the exact state restored when a fault is taken while reading the context.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23102.html
  CVE-2026-23102
• https://bugzilla.suse.com/1257772
  SUSE Bug 1257772

Описание

In the Linux kernel, the following vulnerability has been resolved: ice: fix devlink reload call trace Commit 4da71a77fc3b ("ice: read internal temperature sensor") introduced internal temperature sensor reading via HWMON. ice_hwmon_init() was added to ice_init_feature() and ice_hwmon_exit() was added to ice_remove(). As a result if devlink reload is used to reinit the device and then the driver is removed, a call trace can occur. BUG: unable to handle page fault for address: ffffffffc0fd4b5d Call Trace: string+0x48/0xe0 vsnprintf+0x1f9/0x650 sprintf+0x62/0x80 name_show+0x1f/0x30 dev_attr_show+0x19/0x60 The call trace repeats approximately every 10 minutes when system monitoring tools (e.g., sadc) attempt to read the orphaned hwmon sysfs attributes that reference freed module memory. The sequence is: 1. Driver load, ice_hwmon_init() gets called from ice_init_feature() 2. Devlink reload down, flow does not call ice_remove() 3. Devlink reload up, ice_hwmon_init() gets called from ice_init_feature() resulting in a second instance 4. Driver unload, ice_hwmon_exit() called from ice_remove() leaving the first hwmon instance orphaned with dangling pointer Fix this by moving ice_hwmon_exit() from ice_remove() to ice_deinit_features() to ensure proper cleanup symmetry with ice_hwmon_init().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23104.html
  CVE-2026-23104
• https://bugzilla.suse.com/1257763
  SUSE Bug 1257763

Описание

In the Linux kernel, the following vulnerability has been resolved: net/sched: qfq: Use cl_is_active to determine whether class is active in qfq_rm_from_ag This is more of a preventive patch to make the code more consistent and to prevent possible exploits that employ child qlen manipulations on qfq. use cl_is_active instead of relying on the child qdisc's qlen to determine class activation.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23105.html
  CVE-2026-23105
• https://bugzilla.suse.com/1257775
  SUSE Bug 1257775

Описание

In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: signal: Allocate SSVE storage when restoring ZA The code to restore a ZA context doesn't attempt to allocate the task's sve_state before setting TIF_SME. Consequently, restoring a ZA context can place a task into an invalid state where TIF_SME is set but the task's sve_state is NULL. In legitimate but uncommon cases where the ZA signal context was NOT created by the kernel in the context of the same task (e.g. if the task is saved/restored with something like CRIU), we have no guarantee that sve_state had been allocated previously. In these cases, userspace can enter streaming mode without trapping while sve_state is NULL, causing a later NULL pointer dereference when the kernel attempts to store the register state: | # ./sigreturn-za | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000096000046 | EC = 0x25: DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x06: level 2 translation fault | Data abort info: | ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000 | CM = 0, WnR = 1, TnD = 0, TagAccess = 0 | GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 | user pgtable: 4k pages, 52-bit VAs, pgdp=0000000101f47c00 | [0000000000000000] pgd=08000001021d8403, p4d=0800000102274403, pud=0800000102275403, pmd=0000000000000000 | Internal error: Oops: 0000000096000046 [#1] SMP | Modules linked in: | CPU: 0 UID: 0 PID: 153 Comm: sigreturn-za Not tainted 6.19.0-rc1 #1 PREEMPT | Hardware name: linux,dummy-virt (DT) | pstate: 214000c9 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : sve_save_state+0x4/0xf0 | lr : fpsimd_save_user_state+0xb0/0x1c0 | sp : ffff80008070bcc0 | x29: ffff80008070bcc0 x28: fff00000c1ca4c40 x27: 63cfa172fb5cf658 | x26: fff00000c1ca5228 x25: 0000000000000000 x24: 0000000000000000 | x23: 0000000000000000 x22: fff00000c1ca4c40 x21: fff00000c1ca4c40 | x20: 0000000000000020 x19: fff00000ff6900f0 x18: 0000000000000000 | x17: fff05e8e0311f000 x16: 0000000000000000 x15: 028fca8f3bdaf21c | x14: 0000000000000212 x13: fff00000c0209f10 x12: 0000000000000020 | x11: 0000000000200b20 x10: 0000000000000000 x9 : fff00000ff69dcc0 | x8 : 00000000000003f2 x7 : 0000000000000001 x6 : fff00000c1ca5b48 | x5 : fff05e8e0311f000 x4 : 0000000008000000 x3 : 0000000000000000 | x2 : 0000000000000001 x1 : fff00000c1ca5970 x0 : 0000000000000440 | Call trace: | sve_save_state+0x4/0xf0 (P) | fpsimd_thread_switch+0x48/0x198 | __switch_to+0x20/0x1c0 | __schedule+0x36c/0xce0 | schedule+0x34/0x11c | exit_to_user_mode_loop+0x124/0x188 | el0_interrupt+0xc8/0xd8 | __el0_irq_handler_common+0x18/0x24 | el0t_64_irq_handler+0x10/0x1c | el0t_64_irq+0x198/0x19c | Code: 54000040 d51b4408 d65f03c0 d503245f (e5bb5800) | ---[ end trace 0000000000000000 ]--- Fix this by having restore_za_context() ensure that the task's sve_state is allocated, matching what we do when taking an SME trap. Any live SVE/SSVE state (which is restored earlier from a separate signal context) must be preserved, and hence this is not zeroed.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23107.html
  CVE-2026-23107
• https://bugzilla.suse.com/1257762
  SUSE Bug 1257762

Описание

In the Linux kernel, the following vulnerability has been resolved: can: usb_8dev: usb_8dev_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In usb_8dev_open() -> usb_8dev_start(), the URBs for USB-in transfers are allocated, added to the priv->rx_submitted anchor and submitted. In the complete callback usb_8dev_read_bulk_callback(), the URBs are processed and resubmitted. In usb_8dev_close() -> unlink_all_urbs() the URBs are freed by calling usb_kill_anchored_urbs(&priv->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the usb_8dev_read_bulk_callback() to the priv->rx_submitted anchor.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23108.html
  CVE-2026-23108
• https://bugzilla.suse.com/1257770
  SUSE Bug 1257770

Описание

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Wake up the error handler when final completions race against each other The fragile ordering between marking commands completed or failed so that the error handler only wakes when the last running command completes or times out has race conditions. These race conditions can cause the SCSI layer to fail to wake the error handler, leaving I/O through the SCSI host stuck as the error state cannot advance. First, there is an memory ordering issue within scsi_dec_host_busy(). The write which clears SCMD_STATE_INFLIGHT may be reordered with reads counting in scsi_host_busy(). While the local CPU will see its own write, reordering can allow other CPUs in scsi_dec_host_busy() or scsi_eh_inc_host_failed() to see a raised busy count, causing no CPU to see a host busy equal to the host_failed count. This race condition can be prevented with a memory barrier on the error path to force the write to be visible before counting host busy commands. Second, there is a general ordering issue with scsi_eh_inc_host_failed(). By counting busy commands before incrementing host_failed, it can race with a final command in scsi_dec_host_busy(), such that scsi_dec_host_busy() does not see host_failed incremented but scsi_eh_inc_host_failed() counts busy commands before SCMD_STATE_INFLIGHT is cleared by scsi_dec_host_busy(), resulting in neither waking the error handler task. This needs the call to scsi_host_busy() to be moved after host_failed is incremented to close the race condition.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23110.html
  CVE-2026-23110
• https://bugzilla.suse.com/1257761
  SUSE Bug 1257761

Описание

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate() nft_map_catchall_activate() has an inverted element activity check compared to its non-catchall counterpart nft_mapelem_activate() and compared to what is logically required. nft_map_catchall_activate() is called from the abort path to re-activate catchall map elements that were deactivated during a failed transaction. It should skip elements that are already active (they don't need re-activation) and process elements that are inactive (they need to be restored). Instead, the current code does the opposite: it skips inactive elements and processes active ones. Compare the non-catchall activate callback, which is correct: nft_mapelem_activate(): if (nft_set_elem_active(ext, iter->genmask)) return 0; /* skip active, process inactive */ With the buggy catchall version: nft_map_catchall_activate(): if (!nft_set_elem_active(ext, genmask)) continue; /* skip inactive, process active */ The consequence is that when a DELSET operation is aborted, nft_setelem_data_activate() is never called for the catchall element. For NFT_GOTO verdict elements, this means nft_data_hold() is never called to restore the chain->use reference count. Each abort cycle permanently decrements chain->use. Once chain->use reaches zero, DELCHAIN succeeds and frees the chain while catchall verdict elements still reference it, resulting in a use-after-free. This is exploitable for local privilege escalation from an unprivileged user via user namespaces + nftables on distributions that enable CONFIG_USER_NS and CONFIG_NF_TABLES. Fix by removing the negation so the check matches nft_mapelem_activate(): skip active elements, process inactive ones.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23111.html
  CVE-2026-23111
• https://bugzilla.suse.com/1258181
  SUSE Bug 1258181
• https://bugzilla.suse.com/1258183
  SUSE Bug 1258183

Описание

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec nvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDU length or offset exceeds sg_cnt and then use bogus sg->length/offset values, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remaining entries, and sg->length/offset before building the bvec.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23112.html
  CVE-2026-23112
• https://bugzilla.suse.com/1258184
  SUSE Bug 1258184

Описание

In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8m-blk-ctrl: Remove separate rst and clk mask for 8mq vpu For i.MX8MQ platform, the ADB in the VPUMIX domain has no separate reset and clock enable bits, but is ungated and reset together with the VPUs. So we can't reset G1 or G2 separately, it may led to the system hang. Remove rst_mask and clk_mask of imx8mq_vpu_blk_ctl_domain_data. Let imx8mq_vpu_power_notifier() do really vpu reset.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23116.html
  CVE-2026-23116
• https://bugzilla.suse.com/1258277
  SUSE Bug 1258277

Описание

In the Linux kernel, the following vulnerability has been resolved: bonding: provide a net pointer to __skb_flow_dissect() After 3cbf4ffba5ee ("net: plumb network namespace into __skb_flow_dissect") we have to provide a net pointer to __skb_flow_dissect(), either via skb->dev, skb->sk, or a user provided pointer. In the following case, syzbot was able to cook a bare skb. WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0xb57/0x68b0 net/core/flow_dissector.c:1131, CPU#1: syz.2.1418/11053 Call Trace: <TASK> bond_flow_dissect drivers/net/bonding/bond_main.c:4093 [inline] __bond_xmit_hash+0x2d7/0xba0 drivers/net/bonding/bond_main.c:4157 bond_xmit_hash_xdp drivers/net/bonding/bond_main.c:4208 [inline] bond_xdp_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5139 [inline] bond_xdp_get_xmit_slave+0x1fd/0x710 drivers/net/bonding/bond_main.c:5515 xdp_master_redirect+0x13f/0x2c0 net/core/filter.c:4388 bpf_prog_run_xdp include/net/xdp.h:700 [inline] bpf_test_run+0x6b2/0x7d0 net/bpf/test_run.c:421 bpf_prog_test_run_xdp+0x795/0x10e0 net/bpf/test_run.c:1390 bpf_prog_test_run+0x2c7/0x340 kernel/bpf/syscall.c:4703 __sys_bpf+0x562/0x860 kernel/bpf/syscall.c:6182 __do_sys_bpf kernel/bpf/syscall.c:6274 [inline] __se_sys_bpf kernel/bpf/syscall.c:6272 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:6272 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23119.html
  CVE-2026-23119
• https://bugzilla.suse.com/1258273
  SUSE Bug 1258273

Описание

In the Linux kernel, the following vulnerability has been resolved: mISDN: annotate data-race around dev->work dev->work can re read locklessly in mISDN_read() and mISDN_poll(). Add READ_ONCE()/WRITE_ONCE() annotations. BUG: KCSAN: data-race in mISDN_ioctl / mISDN_read write to 0xffff88812d848280 of 4 bytes by task 10864 on cpu 1: misdn_add_timer drivers/isdn/mISDN/timerdev.c:175 [inline] mISDN_ioctl+0x2fb/0x550 drivers/isdn/mISDN/timerdev.c:233 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xce/0x140 fs/ioctl.c:583 __x64_sys_ioctl+0x43/0x50 fs/ioctl.c:583 x64_sys_call+0x14b0/0x3000 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff88812d848280 of 4 bytes by task 10857 on cpu 0: mISDN_read+0x1f2/0x470 drivers/isdn/mISDN/timerdev.c:112 do_loop_readv_writev fs/read_write.c:847 [inline] vfs_readv+0x3fb/0x690 fs/read_write.c:1020 do_readv+0xe7/0x210 fs/read_write.c:1080 __do_sys_readv fs/read_write.c:1165 [inline] __se_sys_readv fs/read_write.c:1162 [inline] __x64_sys_readv+0x45/0x50 fs/read_write.c:1162 x64_sys_call+0x2831/0x3000 arch/x86/include/generated/asm/syscalls_64.h:20 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x00000000 -> 0x00000001

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23121.html
  CVE-2026-23121
• https://bugzilla.suse.com/1258309
  SUSE Bug 1258309
• https://bugzilla.suse.com/1259135
  SUSE Bug 1259135

Описание

In the Linux kernel, the following vulnerability has been resolved: interconnect: debugfs: initialize src_node and dst_node to empty strings The debugfs_create_str() API assumes that the string pointer is either NULL or points to valid kmalloc() memory. Leaving the pointer uninitialized can cause problems. Initialize src_node and dst_node to empty strings before creating the debugfs entries to guarantee that reads and writes are safe.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23123.html
  CVE-2026-23123
• https://bugzilla.suse.com/1258276
  SUSE Bug 1258276

Описание

In the Linux kernel, the following vulnerability has been resolved: arm64: Set __nocfi on swsusp_arch_resume() A DABT is reported[1] on an android based system when resume from hiberate. This happens because swsusp_arch_suspend_exit() is marked with SYM_CODE_*() and does not have a CFI hash, but swsusp_arch_resume() will attempt to verify the CFI hash when calling a copy of swsusp_arch_suspend_exit(). Given that there's an existing requirement that the entrypoint to swsusp_arch_suspend_exit() is the first byte of the .hibernate_exit.text section, we cannot fix this by marking swsusp_arch_suspend_exit() with SYM_FUNC_*(). The simplest fix for now is to disable the CFI check in swsusp_arch_resume(). Mark swsusp_arch_resume() as __nocfi to disable the CFI check. [1] [ 22.991934][ T1] Unable to handle kernel paging request at virtual address 0000000109170ffc [ 22.991934][ T1] Mem abort info: [ 22.991934][ T1] ESR = 0x0000000096000007 [ 22.991934][ T1] EC = 0x25: DABT (current EL), IL = 32 bits [ 22.991934][ T1] SET = 0, FnV = 0 [ 22.991934][ T1] EA = 0, S1PTW = 0 [ 22.991934][ T1] FSC = 0x07: level 3 translation fault [ 22.991934][ T1] Data abort info: [ 22.991934][ T1] ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 [ 22.991934][ T1] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 22.991934][ T1] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 22.991934][ T1] [0000000109170ffc] user address but active_mm is swapper [ 22.991934][ T1] Internal error: Oops: 0000000096000007 [#1] PREEMPT SMP [ 22.991934][ T1] Dumping ftrace buffer: [ 22.991934][ T1] (ftrace buffer empty) [ 22.991934][ T1] Modules linked in: [ 22.991934][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.98-android15-8-g0b1d2aee7fc3-dirty-4k #1 688c7060a825a3ac418fe53881730b355915a419 [ 22.991934][ T1] Hardware name: Unisoc UMS9360-base Board (DT) [ 22.991934][ T1] pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 22.991934][ T1] pc : swsusp_arch_resume+0x2ac/0x344 [ 22.991934][ T1] lr : swsusp_arch_resume+0x294/0x344 [ 22.991934][ T1] sp : ffffffc08006b960 [ 22.991934][ T1] x29: ffffffc08006b9c0 x28: 0000000000000000 x27: 0000000000000000 [ 22.991934][ T1] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000820 [ 22.991934][ T1] x23: ffffffd0817e3000 x22: ffffffd0817e3000 x21: 0000000000000000 [ 22.991934][ T1] x20: ffffff8089171000 x19: ffffffd08252c8c8 x18: ffffffc080061058 [ 22.991934][ T1] x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 0000000000000004 [ 22.991934][ T1] x14: ffffff8178c88000 x13: 0000000000000006 x12: 0000000000000000 [ 22.991934][ T1] x11: 0000000000000015 x10: 0000000000000001 x9 : ffffffd082533000 [ 22.991934][ T1] x8 : 0000000109171000 x7 : 205b5d3433393139 x6 : 392e32322020205b [ 22.991934][ T1] x5 : 000000010916f000 x4 : 000000008164b000 x3 : ffffff808a4e0530 [ 22.991934][ T1] x2 : ffffffd08058e784 x1 : 0000000082326000 x0 : 000000010a283000 [ 22.991934][ T1] Call trace: [ 22.991934][ T1] swsusp_arch_resume+0x2ac/0x344 [ 22.991934][ T1] hibernation_restore+0x158/0x18c [ 22.991934][ T1] load_image_and_restore+0xb0/0xec [ 22.991934][ T1] software_resume+0xf4/0x19c [ 22.991934][ T1] software_resume_initcall+0x34/0x78 [ 22.991934][ T1] do_one_initcall+0xe8/0x370 [ 22.991934][ T1] do_initcall_level+0xc8/0x19c [ 22.991934][ T1] do_initcalls+0x70/0xc0 [ 22.991934][ T1] do_basic_setup+0x1c/0x28 [ 22.991934][ T1] kernel_init_freeable+0xe0/0x148 [ 22.991934][ T1] kernel_init+0x20/0x1a8 [ 22.991934][ T1] ret_from_fork+0x10/0x20 [ 22.991934][ T1] Code: a9400a61 f94013e0 f9438923 f9400a64 (b85fc110) [catalin.marinas@arm.com: commit log updated by Mark Rutland]

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23128.html
  CVE-2026-23128
• https://bugzilla.suse.com/1258298
  SUSE Bug 1258298

Описание

In the Linux kernel, the following vulnerability has been resolved: dpll: Prevent duplicate registrations Modify the internal registration helpers dpll_xa_ref_{dpll,pin}_add() to reject duplicate registration attempts. Previously, if a caller attempted to register the same pin multiple times (with the same ops, priv, and cookie) on the same device, the core silently increments the reference count and return success. This behavior is incorrect because if the caller makes these duplicate registrations then for the first one dpll_pin_registration is allocated and for others the associated dpll_pin_ref.refcount is incremented. During the first unregistration the associated dpll_pin_registration is freed and for others WARN is fired. Fix this by updating the logic to return `-EEXIST` if a matching registration is found to enforce a strict "register once" policy.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23129.html
  CVE-2026-23129
• https://bugzilla.suse.com/1258299
  SUSE Bug 1258299

Описание

In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: Fix kobject warnings for empty attribute names The hp-bioscfg driver attempts to register kobjects with empty names when the HP BIOS returns attributes with empty name strings. This causes multiple kernel warnings: kobject: (00000000135fb5e6): attempted to be registered with empty name! WARNING: CPU: 14 PID: 3336 at lib/kobject.c:219 kobject_add_internal+0x2eb/0x310 Add validation in hp_init_bios_buffer_attribute() to check if the attribute name is empty after parsing it from the WMI buffer. If empty, log a debug message and skip registration of that attribute, allowing the module to continue processing other valid attributes.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23131.html
  CVE-2026-23131
• https://bugzilla.suse.com/1258297
  SUSE Bug 1258297

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: fix dma_free_coherent() pointer dma_alloc_coherent() allocates a DMA mapped buffer and stores the addresses in XXX_unaligned fields. Those should be reused when freeing the buffer rather than the aligned addresses.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23133.html
  CVE-2026-23133
• https://bugzilla.suse.com/1258249
  SUSE Bug 1258249

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix dma_free_coherent() pointer dma_alloc_coherent() allocates a DMA mapped buffer and stores the addresses in XXX_unaligned fields. Those should be reused when freeing the buffer rather than the aligned addresses.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23135.html
  CVE-2026-23135
• https://bugzilla.suse.com/1258245
  SUSE Bug 1258245

Описание

In the Linux kernel, the following vulnerability has been resolved: libceph: reset sparse-read state in osd_fault() When a fault occurs, the connection is abandoned, reestablished, and any pending operations are retried. The OSD client tracks the progress of a sparse-read reply using a separate state machine, largely independent of the messenger's state. If a connection is lost mid-payload or the sparse-read state machine returns an error, the sparse-read state is not reset. The OSD client will then interpret the beginning of a new reply as the continuation of the old one. If this makes the sparse-read machinery enter a failure state, it may never recover, producing loops like: libceph: [0] got 0 extents libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read Therefore, reset the sparse-read state in osd_fault(), ensuring retries start from a clean state.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23136.html
  CVE-2026-23136
• https://bugzilla.suse.com/1258303
  SUSE Bug 1258303

Описание

In the Linux kernel, the following vulnerability has been resolved: of: unittest: Fix memory leak in unittest_data_add() In unittest_data_add(), if of_resolve_phandles() fails, the allocated unittest_data is not freed, leading to a memory leak. Fix this by using scope-based cleanup helper __free(kfree) for automatic resource cleanup. This ensures unittest_data is automatically freed when it goes out of scope in error paths. For the success path, use retain_and_null_ptr() to transfer ownership of the memory to the device tree and prevent double freeing.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23137.html
  CVE-2026-23137
• https://bugzilla.suse.com/1258232
  SUSE Bug 1258232

Описание

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: update last_gc only when GC has been performed Currently last_gc is being updated everytime a new connection is tracked, that means that it is updated even if a GC wasn't performed. With a sufficiently high packet rate, it is possible to always bypass the GC, causing the list to grow infinitely. Update the last_gc value only when a GC has been actually performed.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23139.html
  CVE-2026-23139
• https://bugzilla.suse.com/1258304
  SUSE Bug 1258304

Описание

In the Linux kernel, the following vulnerability has been resolved: btrfs: send: check for inline extents in range_is_hole_in_parent() Before accessing the disk_bytenr field of a file extent item we need to check if we are dealing with an inline extent. This is because for inline extents their data starts at the offset of the disk_bytenr field. So accessing the disk_bytenr means we are accessing inline data or in case the inline data is less than 8 bytes we can actually cause an invalid memory access if this inline extent item is the first item in the leaf or access metadata from other items.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23141.html
  CVE-2026-23141
• https://bugzilla.suse.com/1258377
  SUSE Bug 1258377

Описание

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-scheme: cleanup access_pattern subdirs on scheme dir setup failure When a DAMOS-scheme DAMON sysfs directory setup fails after setup of access_pattern/ directory, subdirectories of access_pattern/ directory are not cleaned up. As a result, DAMON sysfs interface is nearly broken until the system reboots, and the memory for the unremoved directory is leaked. Cleanup the directories under such failures.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23142.html
  CVE-2026-23142
• https://bugzilla.suse.com/1258289
  SUSE Bug 1258289

Описание

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: cleanup attrs subdirs on context dir setup failure When a context DAMON sysfs directory setup is failed after setup of attrs/ directory, subdirectories of attrs/ directory are not cleaned up. As a result, DAMON sysfs interface is nearly broken until the system reboots, and the memory for the unremoved directory is leaked. Cleanup the directories under such failures.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23144.html
  CVE-2026-23144
• https://bugzilla.suse.com/1258290
  SUSE Bug 1258290

Описание

In the Linux kernel, the following vulnerability has been resolved: ext4: fix iloc.bh leak in ext4_xattr_inode_update_ref The error branch for ext4_xattr_inode_update_ref forget to release the refcount for iloc.bh. Find this when review code.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23145.html
  CVE-2026-23145
• https://bugzilla.suse.com/1258326
  SUSE Bug 1258326

Описание

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix null-ptr-deref in hci_uart_write_work hci_uart_set_proto() sets HCI_UART_PROTO_INIT before calling hci_uart_register_dev(), which calls proto->open() to initialize hu->priv. However, if a TTY write wakeup occurs during this window, hci_uart_tx_wakeup() may schedule write_work before hu->priv is initialized, leading to a NULL pointer dereference in hci_uart_write_work() when proto->dequeue() accesses hu->priv. The race condition is: CPU0 CPU1 ---- ---- hci_uart_set_proto() set_bit(HCI_UART_PROTO_INIT) hci_uart_register_dev() tty write wakeup hci_uart_tty_wakeup() hci_uart_tx_wakeup() schedule_work(&hu->write_work) proto->open(hu) // initializes hu->priv hci_uart_write_work() hci_uart_dequeue() proto->dequeue(hu) // accesses hu->priv (NULL!) Fix this by moving set_bit(HCI_UART_PROTO_INIT) after proto->open() succeeds, ensuring hu->priv is initialized before any work can be scheduled.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23146.html
  CVE-2026-23146
• https://bugzilla.suse.com/1258234
  SUSE Bug 1258234

Описание

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix race in nvmet_bio_done() leading to NULL pointer dereference There is a race condition in nvmet_bio_done() that can cause a NULL pointer dereference in blk_cgroup_bio_start(): 1. nvmet_bio_done() is called when a bio completes 2. nvmet_req_complete() is called, which invokes req->ops->queue_response(req) 3. The queue_response callback can re-queue and re-submit the same request 4. The re-submission reuses the same inline_bio from nvmet_req 5. Meanwhile, nvmet_req_bio_put() (called after nvmet_req_complete) invokes bio_uninit() for inline_bio, which sets bio->bi_blkg to NULL 6. The re-submitted bio enters submit_bio_noacct_nocheck() 7. blk_cgroup_bio_start() dereferences bio->bi_blkg, causing a crash: BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode RIP: 0010:blk_cgroup_bio_start+0x10/0xd0 Call Trace: submit_bio_noacct_nocheck+0x44/0x250 nvmet_bdev_execute_rw+0x254/0x370 [nvmet] process_one_work+0x193/0x3c0 worker_thread+0x281/0x3a0 Fix this by reordering nvmet_bio_done() to call nvmet_req_bio_put() BEFORE nvmet_req_complete(). This ensures the bio is cleaned up before the request can be re-submitted, preventing the race condition.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23148.html
  CVE-2026-23148
• https://bugzilla.suse.com/1258258
  SUSE Bug 1258258

Описание

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix memleak in nfc_llcp_send_ui_frame(). syzbot reported various memory leaks related to NFC, struct nfc_llcp_sock, sk_buff, nfc_dev, etc. [0] The leading log hinted that nfc_llcp_send_ui_frame() failed to allocate skb due to sock_error(sk) being -ENXIO. ENXIO is set by nfc_llcp_socket_release() when struct nfc_llcp_local is destroyed by local_cleanup(). The problem is that there is no synchronisation between nfc_llcp_send_ui_frame() and local_cleanup(), and skb could be put into local->tx_queue after it was purged in local_cleanup(): CPU1 CPU2 ---- ---- nfc_llcp_send_ui_frame() local_cleanup() |- do { ' |- pdu = nfc_alloc_send_skb(..., &err) | . | |- nfc_llcp_socket_release(local, false, ENXIO); | |- skb_queue_purge(&local->tx_queue); | | ' | |- skb_queue_tail(&local->tx_queue, pdu); | ... | |- pdu = nfc_alloc_send_skb(..., &err) | ^._________________________________.' local_cleanup() is called for struct nfc_llcp_local only after nfc_llcp_remove_local() unlinks it from llcp_devices. If we hold local->tx_queue.lock then, we can synchronise the thread and nfc_llcp_send_ui_frame(). Let's do that and check list_empty(&local->list) before queuing skb to local->tx_queue in nfc_llcp_send_ui_frame(). [0]: [ 56.074943][ T6096] llcp: nfc_llcp_send_ui_frame: Could not allocate PDU (error=-6) [ 64.318868][ T5813] kmemleak: 6 new suspected memory leaks (see /sys/kernel/debug/kmemleak) BUG: memory leak unreferenced object 0xffff8881272f6800 (size 1024): comm "syz.0.17", pid 6096, jiffies 4294942766 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 27 00 03 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............ backtrace (crc da58d84d): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4979 [inline] slab_alloc_node mm/slub.c:5284 [inline] __do_kmalloc_node mm/slub.c:5645 [inline] __kmalloc_noprof+0x3e3/0x6b0 mm/slub.c:5658 kmalloc_noprof include/linux/slab.h:961 [inline] sk_prot_alloc+0x11a/0x1b0 net/core/sock.c:2239 sk_alloc+0x36/0x360 net/core/sock.c:2295 nfc_llcp_sock_alloc+0x37/0x130 net/nfc/llcp_sock.c:979 llcp_sock_create+0x71/0xd0 net/nfc/llcp_sock.c:1044 nfc_sock_create+0xc9/0xf0 net/nfc/af_nfc.c:31 __sock_create+0x1a9/0x340 net/socket.c:1605 sock_create net/socket.c:1663 [inline] __sys_socket_create net/socket.c:1700 [inline] __sys_socket+0xb9/0x1a0 net/socket.c:1747 __do_sys_socket net/socket.c:1761 [inline] __se_sys_socket net/socket.c:1759 [inline] __x64_sys_socket+0x1b/0x30 net/socket.c:1759 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f BUG: memory leak unreferenced object 0xffff88810fbd9800 (size 240): comm "syz.0.17", pid 6096, jiffies 4294942850 hex dump (first 32 bytes): 68 f0 ff 08 81 88 ff ff 68 f0 ff 08 81 88 ff ff h.......h....... 00 00 00 00 00 00 00 00 00 68 2f 27 81 88 ff ff .........h/'.... backtrace (crc 6cc652b1): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4979 [inline] slab_alloc_node mm/slub.c:5284 [inline] kmem_cache_alloc_node_noprof+0x36f/0x5e0 mm/slub.c:5336 __alloc_skb+0x203/0x240 net/core/skbuff.c:660 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0x69/0x3f0 net/core/sk ---truncated---

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23150.html
  CVE-2026-23150
• https://bugzilla.suse.com/1258354
  SUSE Bug 1258354

Описание

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix memory leak in set_ssp_complete Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures are not freed after being removed from the pending list. Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") replaced mgmt_pending_foreach() calls with individual command handling but missed adding mgmt_pending_free() calls in both error and success paths of set_ssp_complete(). Other completion functions like set_le_complete() were fixed correctly in the same commit. This causes a memory leak of the mgmt_pending_cmd structure and its associated parameter data for each SSP command that completes. Add the missing mgmt_pending_free(cmd) calls in both code paths to fix the memory leak. Also fix the same issue in set_advertising_complete().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23151.html
  CVE-2026-23151
• https://bugzilla.suse.com/1258237
  SUSE Bug 1258237

Описание

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: correctly decode TTLM with default link map TID-To-Link Mapping (TTLM) elements do not contain any link mapping presence indicator if a default mapping is used and parsing needs to be skipped. Note that access points should not explicitly report an advertised TTLM with a default mapping as that is the implied mapping if the element is not included, this is even the case when switching back to the default mapping. However, mac80211 would incorrectly parse the frame and would also read one byte beyond the end of the element.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23152.html
  CVE-2026-23152
• https://bugzilla.suse.com/1258252
  SUSE Bug 1258252

Описание

In the Linux kernel, the following vulnerability has been resolved: net: fix segmentation of forwarding fraglist GRO This patch enhances GSO segment handling by properly checking the SKB_GSO_DODGY flag for frag_list GSO packets, addressing low throughput issues observed when a station accesses IPv4 servers via hotspots with an IPv6-only upstream interface. Specifically, it fixes a bug in GSO segmentation when forwarding GRO packets containing a frag_list. The function skb_segment_list cannot correctly process GRO skbs that have been converted by XLAT, since XLAT only translates the header of the head skb. Consequently, skbs in the frag_list may remain untranslated, resulting in protocol inconsistencies and reduced throughput. To address this, the patch explicitly sets the SKB_GSO_DODGY flag for GSO packets in XLAT's IPv4/IPv6 protocol translation helpers (bpf_skb_proto_4_to_6 and bpf_skb_proto_6_to_4). This marks GSO packets as potentially modified after protocol translation. As a result, GSO segmentation will avoid using skb_segment_list and instead falls back to skb_segment for packets with the SKB_GSO_DODGY flag. This ensures that only safe and fully translated frag_list packets are processed by skb_segment_list, resolving protocol inconsistencies and improving throughput when forwarding GRO packets converted by XLAT.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23154.html
  CVE-2026-23154
• https://bugzilla.suse.com/1258286
  SUSE Bug 1258286

Описание

In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_receive_bulk_callback(): fix error message Sinc commit 79a6d1bfe114 ("can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error") a failing resubmit URB will print an info message. In the case of a short read where netdev has not yet been assigned, initialize as NULL to avoid dereferencing an undefined value. Also report the error value of the failed resubmit.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23155.html
  CVE-2026-23155
• https://bugzilla.suse.com/1258313
  SUSE Bug 1258313
• https://bugzilla.suse.com/1258315
  SUSE Bug 1258315

Описание

In the Linux kernel, the following vulnerability has been resolved: efivarfs: fix error propagation in efivar_entry_get() efivar_entry_get() always returns success even if the underlying __efivar_entry_get() fails, masking errors. This may result in uninitialized heap memory being copied to userspace in the efivarfs_file_read() path. Fix it by returning the error from __efivar_entry_get().

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23156.html
  CVE-2026-23156
• https://bugzilla.suse.com/1258317
  SUSE Bug 1258317

Описание

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not strictly require dirty metadata threshold for metadata writepages [BUG] There is an internal report that over 1000 processes are waiting at the io_schedule_timeout() of balance_dirty_pages(), causing a system hang and trigger a kernel coredump. The kernel is v6.4 kernel based, but the root problem still applies to any upstream kernel before v6.18. [CAUSE] From Jan Kara for his wisdom on the dirty page balance behavior first. This cgroup dirty limit was what was actually playing the role here because the cgroup had only a small amount of memory and so the dirty limit for it was something like 16MB. Dirty throttling is responsible for enforcing that nobody can dirty (significantly) more dirty memory than there's dirty limit. Thus when a task is dirtying pages it periodically enters into balance_dirty_pages() and we let it sleep there to slow down the dirtying. When the system is over dirty limit already (either globally or within a cgroup of the running task), we will not let the task exit from balance_dirty_pages() until the number of dirty pages drops below the limit. So in this particular case, as I already mentioned, there was a cgroup with relatively small amount of memory and as a result with dirty limit set at 16MB. A task from that cgroup has dirtied about 28MB worth of pages in btrfs btree inode and these were practically the only dirty pages in that cgroup. So that means the only way to reduce the dirty pages of that cgroup is to writeback the dirty pages of btrfs btree inode, and only after that those processes can exit balance_dirty_pages(). Now back to the btrfs part, btree_writepages() is responsible for writing back dirty btree inode pages. The problem here is, there is a btrfs internal threshold that if the btree inode's dirty bytes are below the 32M threshold, it will not do any writeback. This behavior is to batch as much metadata as possible so we won't write back those tree blocks and then later re-COW them again for another modification. This internal 32MiB is higher than the existing dirty page size (28MiB), meaning no writeback will happen, causing a deadlock between btrfs and cgroup: - Btrfs doesn't want to write back btree inode until more dirty pages - Cgroup/MM doesn't want more dirty pages for btrfs btree inode Thus any process touching that btree inode is put into sleep until the number of dirty pages is reduced. Thanks Jan Kara a lot for the analysis of the root cause. [ENHANCEMENT] Since kernel commit b55102826d7d ("btrfs: set AS_KERNEL_FILE on the btree_inode"), btrfs btree inode pages will only be charged to the root cgroup which should have a much larger limit than btrfs' 32MiB threshold. So it should not affect newer kernels. But for all current LTS kernels, they are all affected by this problem, and backporting the whole AS_KERNEL_FILE may not be a good idea. Even for newer kernels I still think it's a good idea to get rid of the internal threshold at btree_writepages(), since for most cases cgroup/MM has a better view of full system memory usage than btrfs' fixed threshold. For internal callers using btrfs_btree_balance_dirty() since that function is already doing internal threshold check, we don't need to bother them. But for external callers of btree_writepages(), just respect their requests and write back whatever they want, ignoring the internal btrfs threshold to avoid such deadlock on btree inode dirty page balancing.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23157.html
  CVE-2026-23157
• https://bugzilla.suse.com/1258376
  SUSE Bug 1258376

Описание

In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix UAF in configfs release path The gpio-virtuser configfs release path uses guard(mutex) to protect the device structure. However, the device is freed before the guard cleanup runs, causing mutex_unlock() to operate on freed memory. Specifically, gpio_virtuser_device_config_group_release() destroys the mutex and frees the device while still inside the guard(mutex) scope. When the function returns, the guard cleanup invokes mutex_unlock(&dev->lock), resulting in a slab use-after-free. Limit the mutex lifetime by using a scoped_guard() only around the activation check, so that the lock is released before mutex_destroy() and kfree() are called.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23158.html
  CVE-2026-23158
• https://bugzilla.suse.com/1258323
  SUSE Bug 1258323

Описание

In the Linux kernel, the following vulnerability has been resolved: mm/shmem, swap: fix race of truncate and swap entry split The helper for shmem swap freeing is not handling the order of swap entries correctly. It uses xa_cmpxchg_irq to erase the swap entry, but it gets the entry order before that using xa_get_order without lock protection, and it may get an outdated order value if the entry is split or changed in other ways after the xa_get_order and before the xa_cmpxchg_irq. And besides, the order could grow and be larger than expected, and cause truncation to erase data beyond the end border. For example, if the target entry and following entries are swapped in or freed, then a large folio was added in place and swapped out, using the same entry, the xa_cmpxchg_irq will still succeed, it's very unlikely to happen though. To fix that, open code the Xarray cmpxchg and put the order retrieval and value checking in the same critical section. Also, ensure the order won't exceed the end border, skip it if the entry goes across the border. Skipping large swap entries crosses the end border is safe here. Shmem truncate iterates the range twice, in the first iteration, find_lock_entries already filtered such entries, and shmem will swapin the entries that cross the end border and partially truncate the folio (split the folio or at least zero part of it). So in the second loop here, if we see a swap entry that crosses the end order, it must at least have its content erased already. I observed random swapoff hangs and kernel panics when stress testing ZSWAP with shmem. After applying this patch, all problems are gone.

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23161.html
  CVE-2026-23161
• https://bugzilla.suse.com/1258355
  SUSE Bug 1258355
• https://bugzilla.suse.com/1259134
  SUSE Bug 1259134

Описание

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix NULL pointer dereference in amdgpu_gmc_filter_faults_remove On APUs such as Raven and Renoir (GC 9.1.0, 9.2.2, 9.3.0), the ih1 and ih2 interrupt ring buffers are not initialized. This is by design, as these secondary IH rings are only available on discrete GPUs. See vega10_ih_sw_init() which explicitly skips ih1/ih2 initialization when AMD_IS_APU is set. However, amdgpu_gmc_filter_faults_remove() unconditionally uses ih1 to get the timestamp of the last interrupt entry. When retry faults are enabled on APUs (noretry=0), this function is called from the SVM page fault recovery path, resulting in a NULL pointer dereference when amdgpu_ih_decode_iv_ts_helper() attempts to access ih->ring[]. The crash manifests as: BUG: kernel NULL pointer dereference, address: 0000000000000004 RIP: 0010:amdgpu_ih_decode_iv_ts_helper+0x22/0x40 [amdgpu] Call Trace: amdgpu_gmc_filter_faults_remove+0x60/0x130 [amdgpu] svm_range_restore_pages+0xae5/0x11c0 [amdgpu] amdgpu_vm_handle_fault+0xc8/0x340 [amdgpu] gmc_v9_0_process_interrupt+0x191/0x220 [amdgpu] amdgpu_irq_dispatch+0xed/0x2c0 [amdgpu] amdgpu_ih_process+0x84/0x100 [amdgpu] This issue was exposed by commit 1446226d32a4 ("drm/amdgpu: Remove GC HW IP 9.3.0 from noretry=1") which changed the default for Renoir APU from noretry=1 to noretry=0, enabling retry fault handling and thus exercising the buggy code path. Fix this by adding a check for ih1.ring_size before attempting to use it. Also restore the soft_ih support from commit dd299441654f ("drm/amdgpu: Rework retry fault removal"). This is needed if the hardware doesn't support secondary HW IH rings. v2: additional updates (Alex) (cherry picked from commit 6ce8d536c80aa1f059e82184f0d1994436b1d526)

Затронутые продукты

Ссылки

• https://www.suse.com/security/cve/CVE-2026-23163.html
  CVE-2026-23163
• https://bugzilla.suse.com/1258544
  SUSE Bug 1258544

Описание

In the Linux kernel, the following vulnerability has been resolved: ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues Add NULL pointer checks in ice_vsi_set_napi_queues() to prevent crashes during resume from suspend when rings[q_idx]->q_vector is NULL. Tested adaptor: 60:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller E810-XXV for SFP [8086:159b] (rev 02) Subsystem: Intel Corporation Ethernet Network Adapter E810-XXV-2 [8086:4003] SR-IOV state: both disabled and enabled can reproduce this issue. kernel version: v6.18 Reproduce steps: Boot up and execute suspend like systemctl suspend or rtcwake. Log: <1>[ 231.443607] BUG: kernel NULL pointer dereference, address: 0000000000000040 <1>[ 231.444052] #PF: supervisor read access in kernel mode <1>[ 231.444484] #PF: error_code(0x0000) - not-present page <6>[ 231.444913] PGD 0 P4D 0 <4>[ 231.445342] Oops: Oops: 0000 [#1] SMP NOPTI <4>[ 231.446635] RIP: 0010:netif_queue_set_napi+0xa/0x170 <4>[ 231.447067] Code: 31 f6 31 ff c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 85 c9 74 0b <48> 83 79 30 00 0f 84 39 01 00 00 55 41 89 d1 49 89 f8 89 f2 48 89 <4>[ 231.447513] RSP: 0018:ffffcc780fc078c0 EFLAGS: 00010202 <4>[ 231.447961] RAX: ffff8b848ca30400 RBX: ffff8b848caf2028 RCX: 0000000000000010 <4>[ 231.448443] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8b848dbd4000 <4>[ 231.448896] RBP: ffffcc780fc078e8 R08: 0000000000000000 R09: 0000000000000000 <4>[ 231.449345] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 <4>[ 231.449817] R13: ffff8b848dbd4000 R14: ffff8b84833390c8 R15: 0000000000000000 <4>[ 231.450265] FS: 00007c7b29e9d740(0000) GS:ffff8b8c068e2000(0000) knlGS:0000000000000000 <4>[ 231.450715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 231.451179] CR2: 0000000000000040 CR3: 000000030626f004 CR4: 0000000000f72ef0 <4>[ 231.451629] PKRU: 55555554 <4>[ 231.452076] Call Trace: <4>[ 231.452549] <TASK> <4>[ 231.452996] ? ice_vsi_set_napi_queues+0x4d/0x110 [ice] <4>[ 231.453482] ice_resume+0xfd/0x220 [ice] <4>[ 231.453977] ? __pfx_pci_pm_resume+0x10/0x10 <4>[ 231.454425] pci_pm_resume+0x8c/0x140 <4>[ 231.454872] ? __pfx_pci_pm_resume+0x10/0x10 <4>[ 231.455347] dpm_run_callback+0x5f/0x160 <4>[ 231.455796] ? dpm_wait_for_superior+0x107/0x170 <4>[ 231.456244] device_resume+0x177/0x270 <4>[ 231.456708] dpm_resume+0x209/0x2f0 <4>[ 231.457151] dpm_resume_end+0x15/0x30 <4>[ 231.457596] suspend_devices_and_enter+0x1da/0x2b0 <4>[ 231.458054] enter_state+0x10e/0x570 Add defensive checks for both the ring pointer and its q_vector before dereferencing, allowing the system to resume successfully even when q_vectors are unmapped.

Затронутые продукты