In the Linux kernel, the following vulnerability has been resolved: cifs: Fix busy dentry used after unmounting Since commit 340cea84f691c ("cifs: open files should not hold ref on superblock"), cifs file only holds the dentry ref_cnt, the cifs file close work(cfile->deferred) could be executed after unmounting, which will trigger a warning in generic_shutdown_super: BUG: Dentry 00000000a14a6845{i=c,n=file} still in use (1) [unmount of cifs cifs] The detailed processs is: process A process B kworker fd = open(PATH) vfs_open file->__f_path = *path // dentry->d_lockref.count = 1 cifs_open cifs_new_fileinfo cfile->dentry = dget(dentry) // dentry->d_lockref.count = 2 close(fd) __fput cifs_close queue_delayed_work(deferredclose_wq, cfile->deferred) dput(dentry) // dentry->d_lockref.count = 1 smb2_deferred_work_close _cifsFileInfo_put list_del(&cifs_file->flist) umount cleanup_mnt deactivate_super cifs_kill_sb cifs_close_all_deferred_files_sb cifs_close_all_deferred_f...

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: pcm512x: fix null-ptr dereference in pcm512x_overclock_xxx_put() In the pcm512x chipset driver, pcm512x_overclock_xxx_put() is defined as a general mixer kcontrol instead of a DAPM kcontrol, so struct snd_soc_dapm_context must not be accessed via snd_soc_dapm_kcontrol_to_dapm(). This causes a NULL pointer dereference, so it must be modified to use snd_soc_component_to_dapm().

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits Userspace can restore an ITS Device Table Entry whose Size field encodes more EventID bits than the virtual ITS supports. The live MAPD path rejects that state, but vgic_its_restore_dte() accepts it and stores the out-of-range value in dev->num_eventid_bits. Reject restored DTEs with num_eventid_bits > VITS_TYPER_IDBITS before allocating the device. This mirrors the MAPD check and prevents the restored state from reaching vgic_its_restore_itt(), where the unchecked value can be converted into an oversized scan_its_table() range.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Free private_irqs when init fails after allocation Companion to commit 250f25367b58 ("KVM: arm64: Tear down vGIC on failed vCPU creation"), which added the missing kvm_vgic_vcpu_destroy() call to the kvm_share_hyp() failure path in kvm_arch_vcpu_create(). The kvm_vgic_vcpu_init() failure path immediately above it has the same shape and still needs the same cleanup. Call kvm_vgic_vcpu_destroy() when kvm_vgic_vcpu_init() fails so private IRQs allocated before a redistributor iodev registration failure are released before the failed vCPU is freed.

In the Linux kernel, the following vulnerability has been resolved: virt: sev-guest: Explicitly leak pages in unknown state When set_memory_{encrypted,decrypted}() fail, the user cannot know at which point the function failed, meaning that the pages are left in an unknown state from the point of view of the caller. Since the pages may be left in an unencrypted state, they are not suitable for general use, and cannot be returned safely to the buddy allocator. Avoid the issue by never freeing the pages, and then do the proper accounting by calling snp_leak_pages().

In the Linux kernel, the following vulnerability has been resolved: scsi: isci: Fix use-after-free in device removal path The ISCI completion tasklet is initialized in isci_host_alloc() (drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacy interrupt handlers (drivers/scsi/isci/host.c:223,613). isci_host_deinit() stops the controller and waits for stop completion, but it never kills completion_tasklet before teardown continues. A top-of-function tasklet_kill() is not sufficient here: interrupts are only disabled when isci_host_stop_complete() runs, so until wait_for_stop() returns the IRQ handlers can still requeue the tasklet. The tasklet callback also re-enables interrupts after draining completions, so killing the tasklet before the source is quiesced leaves the same race open. Once wait_for_stop() returns, no further IRQ-driven scheduling can occur. Kill completion_tasklet there so teardown cannot race a queued tasklet running on a dead ihost. On remove or unloa...

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as ...

In the Linux kernel, the following vulnerability has been resolved: fwctl: pds: Validate RPC input size before parsing The fwctl core allocates the device-specific RPC input buffer with fwctl_rpc.in_len and passes that buffer to the driver callback. pdsfc_fw_rpc() casts the buffer to struct fwctl_rpc_pds and then calls pdsfc_validate_rpc(), which reads fields from that structure before checking that the input buffer is large enough to contain it. A short in_len can make pds_fwctl read beyond the allocation. Reject pds RPC buffers that are smaller than struct fwctl_rpc_pds before parsing any pds-specific fields.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix shrinker deadlock With PROVE_LOCKING on an Snapdragon X1 and VM reclaim pressure, we see: ====================================================== WARNING: possible circular locking dependency detected 7.0.0-debug+ #43 Tainted: G W ------------------------------------------------------ kswapd0/82 is trying to acquire lock: ffff800080ec3870 (reservation_ww_class_acquire){+.+.}-{0:0}, at: msm_gem_shrinker_scan+0x17c/0x400 [msm] but task is already holding lock: ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x4d0/0xad0 lock_acquire.part.0+0xc4/0x248 lock_acquire+0x8c/0x248 fs_reclaim_acquire+0xd0/0xf0 dma_resv_lockdep+0x224/0x348 do_one_initcall+0x84/0x5d0 do_initcalls+0x194/0x1d8 kernel_init_freeable+0x128/0x180 kernel_init+0x2c/0x16...

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix use-after-free of CPU job query arrays on error path The CPU job ioctl's fail label calls kvfree() on cpu_job's timestamp and performance query arrays after v3d_job_cleanup(), which drops the job's last reference and frees cpu_job. Reading cpu_job at that point is a use-after-free. Also, on the early v3d_job_init() failure path, it is a NULL dereference, since v3d_job_deallocate() zeroes the local pointer. In the success path, the arrays are released from the scheduler's .free_job callback, but on the error path, they are freed manually, as the job was never pushed to the scheduler. While the success path deals with this correctly, the fail path doesn't. On top of that, the manual kvfree() calls only free the array storage; they don't drm_syncobj_put() the per-query syncobjs that v3d_timestamp_query_info_free() and v3d_performance_query_info_free() release on the success path. So the same fail path that...

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use uninterruptible resv lock for plane updates virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and ignore its return value. The function can fail with -EINTR from dma_resv_lock_interruptible() (signal during lock wait) or with -ENOMEM from dma_resv_reserve_fences() (fence slot allocation), leaving the resv lock not held. The queue path then walks the object array and calls dma_resv_add_fence(), which requires the lock held; with lockdep enabled this trips dma_resv_assert_held(): WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840 Call Trace: virtio_gpu_array_add_fence virtio_gpu_queue_ctrl_sgs virtio_gpu_queue_fenced_ctrl_buffer virtio_gpu_cursor_plane_update drm_atomic_helper_commit_planes drm_atomic_helper_commit_tail commit_tail drm_atomic_helper_commit drm_atomic_commit drm_atomic_helper_update...

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Validate GPIO pin LUT table size before iterating [Why&How] The GPIO pin table parsers in get_gpio_i2c_info() and bios_parser_get_gpio_pin_info() derive an element count from the VBIOS table_header.structuresize field, then iterate over gpio_pin[] entries. However, GET_IMAGE() only validates that the table header itself fits within the BIOS image. If the VBIOS reports a structuresize larger than the actual mapped data, the loop reads past the end of the BIOS image, causing an out-of-bounds read. Fix this by calling bios_get_image() to validate that the full claimed structuresize is accessible within the BIOS image before entering the loop in both functions. (cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3)

In the Linux kernel, the following vulnerability has been resolved: batman-adv: mcast: fix use-after-free in orig_node RCU release batadv_mcast_purge_orig() removes entries from RCU-protected hlists but does not wait for an RCU grace period before returning. Concurrent RCU readers may still accesses references to those entries at the point of removal. RCU-protected readers trying to operate on entries like orig->mcast_want_all_ipv6_node will then access already freed memory. Fix this by moving batadv_mcast_purge_orig() to batadv_orig_node_release(), just before the call_rcu() invocation. This ensures RCU readers that were active at purge time have drained before the orig_node memory is reclaimed.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: avoid double decrement of bla.num_requests The bla.num_requests is increased when no request_sent was in progress. And it is decremented in various places (announcement was received, backbone is purged, periodic work). But the check if the request_sent is actually set to a specific state and the atomic_dec/_inc are not safe because they are not atomic (TOCTOU) and multiple such code portions can run concurrently. At the same time, it is necessary to modify request_sent (state) and bla.num_requests atomically. Otherwise batadv_bla_send_request() might set request_sent to 1 and is interrupted. batadv_handle_announce() can then set request_sent back to 0 and decrement num_requests before batadv_bla_send_request() incremented it. The two operations must therefore be locked. And since state (request_sent) and wait_periods are only accessed inside this lock, they can be converted to simpler datatypes. An...

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: avoid NULL-ptr deref for claim via dropped interface Without rtnl_lock held, a hardif might be retrieved as primary interface of a meshif, but then (while operating on this interface) getting decoupled from the mesh interface. In this case, the meshif still exists but the pointer from the primary hardif to the meshif is set to NULL. The mesh_iface must be checked first to be non-NULL before continuing to send an ARP request using meshif.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: directly shut down timer on cleanup batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by timer_delete() to guard against the timer handler re-arming itself between the two calls. This double-deletion hack relied on the sending status being set to 0 to suppress re-arming. Replace both calls with a single timer_shutdown_sync(). This function both waits for any running timer callback to complete (like timer_delete_sync()) and permanently disarms the timer so it cannot be re-armed afterwards, making re-arming prevention unconditional and self-documenting. The re-arming property is also required because otherwise: 1. context 0 (batadv_tp_recv_ack()) checks in batadv_tp_reset_sender_timer() if sending is still 1 -> it is 2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in this process forces the kthread to stop timer in batadv_tp_sender_cleanup() 3. context 0 con...

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: fix tp_vars reference leak in receiver shutdown The receiver shutdown timer handler, batadv_tp_receiver_shutdown(), is responsible for releasing the tp_vars reference it holds. However, the existing logic for coordinating this release with batadv_tp_stop_all() was flawed. timer_shutdown_sync() guarantees the timer will not fire again after it returns, but it returns non-zero only when the timer was pending at the time of the call. If the timer had already expired (and batadv_tp_stop_all() would unsucessfully try to rearm itself), batadv_tp_stop_all() skips its batadv_tp_vars_put(), and batadv_tp_receiver_shutdown() fails to put its own reference as well. Fix this by introducing a new atomic variable receiving that is set to 1 when the receiver is initialized and cleared atomically with atomic_xchg() by whichever side claims it first. Only the side that observes the transition from 1 to 0 is re...

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: fix TOCTOU race for reported vlans The local TT based TVLV is generated by first checking the number of VLANs which have at least one TT entry. A new buffer with the correct size for the VLANs is then allocated. Only then, the list of VLANs s used to fill the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock is held. But the actual number of TT entries of each VLAN can still increase during this time - just not the number of VLANs in the list. But the prefilter used in the buffer size calculation might still cause an increase of the number of VLANs which need to be stored. Simply because a VLAN might now suddenly have at least one entry when it had none in the pre-alloc check - and then needs to occupy space which was not allocated. It is better to overestimate the buffer size at the beginning and then fill the buffer only with the VLANs which are not empty.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: avoid empty VLAN responses The commit 16116dac2339 ("batman-adv: prevent TT request storms by not sending inconsistent TT TLVLs") added checks to the local (direct) TT response code. But the response can also be done indirectly by another node using the global TT state. To avoid such inconsistency states reported in the original fix, also avoid sending empty VLANs for replies from the global TT state.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: fix negative last_changeset_len batadv_piv_tt::last_changeset_len len was declared as s16, but the field is never intended to hold a negative value. When a value greater than 32767 is assigned, it wraps to a negative signed integer. In batadv_send_my_tt_response(), last_changeset_len is temporarily widened to s32. The incorrectly negative s16 value propagates into the s32, causing batadv_tt_prepare_tvlv_local_data() to allocate a full sized buffer but populates only a small portion of it with the collected changeset. All remaining bits are kept uninitialized. Using an u16 avoids this type confusion and ensures that no (negative) sign extension is performed in batadv_send_my_tt_response().