In the Linux kernel, the following vulnerability has been resolved: cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58 bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing 64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512, eight times the actual on-device size. header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the RAS capability iomap, overrunning the 88-byte mapping by 448 bytes. The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE (512) bytes from its source. For the CPER caller the source is struct cxl_ras_capability_regs::header_log[16] (64 bytes) embedded in a stack-local cxl_cper_prot_err_work_data, so the memcpy reads 448 bytes of kernel stack into the trace event ring buffer where userspace can read it via tracefs. Set CXL_HEADERLOG_SIZE to 64 and derive CXL_HEADERLOG_SIZE_U32 from it, bringing all iomap readers into agreement o...

In the Linux kernel, the following vulnerability has been resolved: ufs: core: tracing: Do not dereference pointers in TP_printk() The trace events in drivers/ufs/core/ufs_trace.h were converted to take a pointer to the hba structure as an argument for the tracepoint and then in TP_printk() the printing of the dev_name from the ring buffer was converted to using the dev dereferenced pointer from the hba saved pointer. This is not allowed as the TP_printk() is executed at the time the trace event is read from /sys/kernel/tracing/trace file. That can happen literally, seconds, minutes, hours, weeks, days, or even months later! There is no guarantee that the hba pointer will still exist by the time it is dereferenced when the "trace" file is read. Instead, save the device name from the hba pointer at the time the tracepoint is called and place it into the ring buffer event. Then the TP_printk() can read the name directly from the ring buffer and remove the possibility that it will read...

In the Linux kernel, the following vulnerability has been resolved: hwmon: (occ) unregister sysfs devices outside occ lock occ_active(false) and occ_shutdown() unregister sysfs-backed devices while occ->lock is held. hwmon_device_unregister() and sysfs_remove_group() can wait for active sysfs callbacks to drain, and those callbacks can enter the OCC update path and try to take occ->lock again. That gives the unregister paths the lock ordering occ->lock -> sysfs callback drain, while a callback has the opposite edge sysfs callback -> occ->lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the real unregister and callback carrier: occ_shutdown() hwmon_device_unregister() occ_show_temp_1() occ_update_response() Lockdep reported the circular dependency with occ_shutdown() already holding the OCC mutex and hwmon_device_unregister() waiting on the sysfs side: WARNING: possible circular locking dependency dete...

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: defer reset until cmd_mutex is unlocked vub300_cmndwork_thread() holds cmd_mutex while it sends a command and waits for the command response. If the response wait times out, __vub300_command_response() kills the command URBs and then synchronously resets the USB device through usb_reset_device(). That reset path re-enters the driver through vub300_pre_reset(), which also takes cmd_mutex. The worker therefore tries to acquire the same mutex recursively while it is still holding it from the command path. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the real worker and timeout/reset carrier: vub300_cmndwork_thread() __vub300_command_response() usb_lock_device_for_reset() usb_reset_device() vub300_pre_reset() Lockdep reported the same-task recursive acquisition on cmd_mutex: WARNING: possible recursive locking detected ... (&te...

In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Fix null-ptr-deref in dw_dp_remove() Attempting to access driver data in the platform driver ->remove() callback may lead to a null pointer dereference since there is no guaranty that the component ->bind() callback invoking platform_set_drvdata() was executed. A common scenario is when Rockchip DRM driver didn't manage to run component_bind_all() because of an (unrelated) error causing early return from rockchip_drm_bind(). Drop the unnecessary call to platform_get_drvdata() and, instead, reference the target device structure via platform_device.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Guard management mailbox channel cleanup against NULL pointer The management mailbox channel cleanup helpers can be called from error handling paths when mgmt_chann has already been destroyed. Add NULL checks to xdna_mailbox_free_channel() and xdna_mailbox_stop_channel() so the cleanup path safely returns instead of dereferencing a NULL mailbox channel pointer.

In the Linux kernel, the following vulnerability has been resolved: hfsplus: Add a sanity check for btree node size Syzbot reported an uninit-value bug in [1] with a corrupted HFS+ image, during the file system mounting process, specifically while loading the catalog, a corrupted node_size value of 1 caused the rec_off argument passed to hfs_bnode_read_u16() (within hfs_bnode_find()) to be excessively large. Consequently, the function failed to return a valid value to initialize the off variable, triggering the bug [1]. Every node starts from BTree node descriptor: struct hfs_bnode_desc. So, the size of node cannot be lesser than that. However, technical specification declares that: "The node size (which is expressed in bytes) must be power of two, from 512 through 32,768, inclusive." Add a check for btree node size base on technical specification. [1] BUG: KMSAN: uninit-value in hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584 hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnod...

In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Fix race condition in event registration The zynqmp_power driver registers handlers for suspend and subsystem restart events using register_event(). However, the work structures (zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by these handlers were allocated and initialized after the registration call. This created a race window where, if the firmware triggered an event immediately after registration but before allocation, the callback (suspend_event_callback or subsystem_restart_event_callback) would dereference a NULL pointer in work_pending(), leading to a crash. Fix this by allocating and initializing the work structures before registering the events.

In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Shutdown and free rx mailbox channel A mbox rx channel is requested using mbox_request_channel_byname() in probe. In remove callback, the rx mailbox channel is cleaned up when the rx_chan is NULL due to incorrect condition check. The mailbox channel is not shutdown and it can receive messages even after the device removal. This leads to use after free. Also the channel resources are not freed. Fix this by checking the rx_chan correctly.

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Add slave_destroy interface for v3 hw WARNING is triggered when executing link reset of remote PHY and rmmod SAS driver simultaneously. Following is the WARNING log: WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0 Call trace: __device_links_no_driver+0xb4/0xc0 device_links_driver_cleanup+0xb0/0xfc __device_release_driver+0x198/0x23c device_release_driver+0x38/0x50 bus_remove_device+0x130/0x140 device_del+0x184/0x434 __scsi_remove_device+0x118/0x150 scsi_remove_target+0x1bc/0x240 sas_rphy_remove+0x90/0x94 sas_rphy_delete+0x24/0x3c sas_destruct_devices+0x64/0xa0 [libsas] sas_revalidate_domain+0xe4/0x150 [libsas] process_one_work+0x1e0/0x46c worker_thread+0x15c/0x464 kthread+0x160/0x170 ret_from_fork+0x10/0x20 ---[ end trace 71e059eb58f85d4a ]--- During SAS phy up, link->status is set to DL_STATE_AVAILABLE in device_links_driver_bound, then this setting influen...

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Treat zero-length cert chain as query for blob lengths When handling a PDH export, treat a zero-length userspace cert chain buffer as a request to query the length of the relevant blobs. Failure to account for the zero-length buffer trips a BUG_ON() when running with CONFIG_DEBUG_VIRTUAL=y due to trying to get the physical address of the ZERO_SIZE_PTR (returned by kzalloc() on the bogus allocation). kernel BUG at arch/x86/mm/physaddr.c:28 ! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 30 UID: 0 PID: 28580 Comm: syz.2.18 Kdump: loaded Tainted: G W 6.18.16-smp-DEV #1 NONE Tainted: [W]=WARN Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 RIP: 0010:__phys_addr+0x16a/0x180 arch/x86/mm/physaddr.c:28 RSP: 0018:ffffc9008329fc80 EFLAGS: 00010293 RAX: ffffffff8179110a RBX: 0000778000000010 RCX: ffff8884e6992600 RDX: 0000000000000000 RSI: 00000000800000...

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL dsm_create() initially checks pdev->bus when computing segment_id: u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0; But the next two lines unconditionally dereference pdev->bus via pcie_find_root_port() and especially pci_dev_id(pdev), which expands to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact NULL, segment_id is initialised to 0 but the very next statement crashes the kernel. smatch flags this: drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we previously assumed 'pdev->bus' could be null (see line 251) Make the NULL handling consistent: if pdev->bus is NULL the device has no PCI context to work with and SEV TIO setup cannot proceed, so return -ENODEV before any of the bus-dependent lookups. The remaining initialisation now runs only on the path where pdev->bus is known to be valid. No change for callers where p...

In the Linux kernel, the following vulnerability has been resolved: media: atomisp: gc2235: fix UAF and memory leak gc2235_probe() handles its error paths incorrectly. If media_entity_pads_init() fails, gc2235_remove() is called, which tears down the subdev and frees dev, but then still falls through to atomisp_register_i2c_module(). This results in use-after-free. If atomisp_register_i2c_module() fails, the media entity and control handler are left initialized and dev is leaked. gc2235_remove() unconditionally calls media_entity_cleanup() and v4l2_ctrl_handler_free(), but these are not initialized at every error path in gc2235_probe(). Replace gc2235_remove() calls in the probe error paths with explicit unwind labels that free only the resources initialized at each point of failure, in reverse order of initialization.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix OOB in scmi_power_name_get() scmi_power_name_get() does not validate the domain number passed by the external caller, which may lead to an out-of-bounds access. Fix this by returning "unknown" for invalid domains, like scmi_reset_name_get() does.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: spacemit: fix NULL check in spacemit_pin_set_config spacemit_pin_set_config() looks up the per-pin descriptor with spacemit_get_pin() then checks the wrong variable for failure: const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin); ... if (!pin) return -EINVAL; reg = spacemit_pin_to_reg(pctrl, spin->pin); pin is an unsigned int pin id, where 0 (GPIO_0 / gmac0_rxdv on K3) is a valid pin, so rejecting it here drops the PAD config write for the first pin of every group. On K3 Pico-ITX the GMAC RGMII group lists pin 0 as its first entry, so its drive-strength / bias configuration was silently ignored. The intended guard is against spacemit_get_pin() returning NULL when the pin id isn't in the SoC's pin table. Check spin instead, which both restores PAD setup for pin 0 and prevents a NULL deref on spin->pin.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix warning in poll cq direct mode CQs allocated by ib_alloc_cq() always have a comp_handler. Though in direct mode this handler is never expected to be called, it is still called when the driver is reset, triggering the following WARN_ONCE(): Call trace: ib_cq_completion_direct+0x38/0x60 hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2] hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2] hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2] hclge_notify_roce_client+0x60/0xbc [hclge] hclge_reset_rebuild+0x48/0x34c [hclge] hclge_reset_subtask+0xcc/0xec [hclge] hclge_reset_service_task+0x80/0x160 [hclge] hclge_service_task+0x50/0x80 (hclge] process_one_work+0x1cc/0x4d0 worker_thread+0x154/0x414 kthread+0x104/0x144 ret_from_fork+0x10/0x18

In the Linux kernel, the following vulnerability has been resolved: ipv6: guard against possible NULL deref in __in6_dev_stats_get() dev_get_by_index_rcu() could return NULL if the original physical device is unregistered. Found by Sashiko.

In the Linux kernel, the following vulnerability has been resolved: rapidio/tsi721: prevent a bad dereference in tsi721_db_dpc() With a list_for_each() loop, if we don't find the item we are looking for in the list, then the loop exits with the iterator, which is "dbell" in this loop, pointing to invalid memory. This code uses the "found" variable to determine if we have found the doorbell we are looking for or not. However, the problem that the "found" variable needs to be set to false at the start of each iteration, otherwise after the first correct doorbell, then everything is marked as found. Reset the "found" to false at the start of the iteration and move the variable inside the loop.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: don't BUG_ON an invalid journal dinode [BUG] A fuzzed OCFS2 image can corrupt the current slot journal dinode while mount is still in progress. The mount path first reports the invalid journal block and then crashes in shutdown: kernel BUG at fs/ocfs2/journal.c:1034! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_journal_toggle_dirty+0x2d6/0x340 fs/ocfs2/journal.c:1034 Call Trace: ocfs2_journal_shutdown+0x414/0xc30 fs/ocfs2/journal.c:1116 ocfs2_mount_volume fs/ocfs2/super.c:1785 [inline] ocfs2_fill_super+0x30a9/0x3cd0 fs/ocfs2/super.c:1083 get_tree_bdev_flags+0x38b/0x640 fs/super.c:1698 get_tree_bdev+0x24/0x40 fs/super.c:1721 ocfs2_get_tree+0x21/0x30 fs/ocfs2/super.c:1184 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/nam...

In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Fix call trace due to missing release() When unloading the igen6_edac driver, there is a call trace: Device '(null)' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst. WARNING: drivers/base/core.c:2567 at device_release+0x84/0x90, CPU#5: rmmod/127209 ... RIP: 0010:device_release+0x84/0x90 Call Trace: <TASK> kobject_put+0x8c/0x220 put_device+0x17/0x30 igen6_unregister_mcis+0xa2/0xe0 [igen6_edac] igen6_remove+0x82/0xb0 [igen6_edac] ... Fix the call trace by providing empty release() functions for the memory controller devices.