In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, delete flows only for existing peers When deleting TC steering flows, iterate only over actual devcom peers instead of assuming all possible ports exist. This avoids touching non-existent peers and ensures cleanup is limited to devices the driver is currently connected to. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 133c8a067 P4D 0 Oops: Oops: 0002 [#1] SMP CPU: 19 UID: 0 PID: 2169 Comm: tc Not tainted 6.18.0+ #156 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0xbe/0x200 [mlx5_core] Code: 00 00 a8 08 74 a8 49 8b 46 18 f6 c4 02 74 9f 4c 8d bf a0 12 00 00 4c 89 ff e8 0e e7 96 e1 49 8b 44 24 08 49 8b 0c 24 4c 89 ff <48> 89 41 08 48 89 08 49 89 2c 24 49 89 5c 24 08 e8 7d ce 96 e1 49 RSP: ...

In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: fix potential skb->frags overflow in RX path When receiving data in the DPMAIF RX path, the t7xx_dpmaif_set_frag_to_skb() function adds page fragments to an skb without checking if the number of fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and potentially causing kernel crashes or other undefined behavior. This issue was identified through static code analysis by comparing with a similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76: fix array overflow on receiving too many fragments for a packet"). The vulnerability could be triggered if the modem firmware sends packets with excessive fragments. While under normal protocol conditions (MTU 3080 bytes, BAT buffer 3584 bytes), a single packet should not require additional fragments, the kernel should not blindly trust firmware behavior. Mali...

In the Linux kernel, the following vulnerability has been resolved: bonding: fix use-after-free due to enslave fail after slave array update Fix a use-after-free which happens due to enslave failure after the new slave has been added to the array. Since the new slave can be used for Tx immediately, we can use it after it has been freed by the enslave error cleanup path which frees the allocated slave memory. Slave update array is supposed to be called last when further enslave failures are not expected. Move it after xdp setup to avoid any problems. It is very easy to reproduce the problem with a simple xdp_pass prog: ip l add bond1 type bond mode balance-xor ip l set bond1 up ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass ip l add dumdum type dummy Then run in parallel: while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done; mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn" The crash happens almost immediately: [ 605.602850] Oops:...

In the Linux kernel, the following vulnerability has been resolved: drm/imx/tve: fix probe device leak Make sure to drop the reference taken to the DDC device during probe on probe failure (e.g. probe deferral) and on driver unbind.

Insufficient policy enforcement in Frames in Google Chrome prior to 145.0.7632.45 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium)

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix race in mptcp_pm_nl_flush_addrs_doit() syzbot and Eulgyu Kim reported crashes in mptcp_pm_nl_get_local_id() and/or mptcp_pm_nl_is_backup() Root cause is list_splice_init() in mptcp_pm_nl_flush_addrs_doit() which is not RCU ready. list_splice_init_rcu() can not be called here while holding pernet->lock spinlock. Many thanks to Eulgyu Kim for providing a repro and testing our patches.

In the Linux kernel, the following vulnerability has been resolved: flex_proportions: make fprop_new_period() hardirq safe Bernd has reported a lockdep splat from flexible proportions code that is essentially complaining about the following race: <timer fires> run_timer_softirq - we are in softirq context call_timer_fn writeout_period fprop_new_period write_seqcount_begin(&p->sequence); <hardirq is raised> ... blk_mq_end_request() blk_update_request() ext4_end_bio() folio_end_writeback() __wb_writeout_add() __fprop_add_percpu_max() if (unlikely(max_frac < FPROP_FRAC_BASE)) { fprop_fraction_percpu() seq = read_seqcount_begin(&p->sequence); - sees odd sequence so loops indefinitely Note that a deadlock like this is only possible if the bdi has configured maximum fraction of writeout throughput which is very rare in general but frequent for example for FUSE bdis. To fix this problem we have to make sure write section of the sequence counter is irqsafe.

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix race between rfkill and nci_unregister_device(). syzbot reported the splat below [0] without a repro. It indicates that struct nci_dev.cmd_wq had been destroyed before nci_close_device() was called via rfkill. nci_dev.cmd_wq is only destroyed in nci_unregister_device(), which (I think) was called from virtual_ncidev_close() when syzbot close()d an fd of virtual_ncidev. The problem is that nci_unregister_device() destroys nci_dev.cmd_wq first and then calls nfc_unregister_device(), which removes the device from rfkill by rfkill_unregister(). So, the device is still visible via rfkill even after nci_dev.cmd_wq is destroyed. Let's unregister the device from rfkill first in nci_unregister_device(). Note that we cannot call nfc_unregister_device() before nci_close_device() because 1) nfc_unregister_device() calls device_del() which frees all memory allocated by devm_kzalloc() and linked to ndev->conn_info_l...

In the Linux kernel, the following vulnerability has been resolved: ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues Add NULL pointer checks in ice_vsi_set_napi_queues() to prevent crashes during resume from suspend when rings[q_idx]->q_vector is NULL. Tested adaptor: 60:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller E810-XXV for SFP [8086:159b] (rev 02) Subsystem: Intel Corporation Ethernet Network Adapter E810-XXV-2 [8086:4003] SR-IOV state: both disabled and enabled can reproduce this issue. kernel version: v6.18 Reproduce steps: Boot up and execute suspend like systemctl suspend or rtcwake. Log: <1>[ 231.443607] BUG: kernel NULL pointer dereference, address: 0000000000000040 <1>[ 231.444052] #PF: supervisor read access in kernel mode <1>[ 231.444484] #PF: error_code(0x0000) - not-present page <6>[ 231.444913] PGD 0 P4D 0 <4>[ 231.445342] Oops: Oops: 0000 [#1] SMP NOPTI <4>[ 231.446635] RIP: 0010:netif_queue_set_napi+0xa/0x170 <4>[ 231.4...

In the Linux kernel, the following vulnerability has been resolved: sfc: fix deadlock in RSS config read Since cited commit, core locks the net_device's rss_lock when handling ethtool -x command, so driver's implementation should not lock it again. Remove the latter.

In the Linux kernel, the following vulnerability has been resolved: rocker: fix memory leak in rocker_world_port_post_fini() In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with kzalloc(wops->port_priv_size, GFP_KERNEL). However, in rocker_world_port_post_fini(), the memory is only freed when wops->port_post_fini callback is set: if (!wops->port_post_fini) return; wops->port_post_fini(rocker_port); kfree(rocker_port->wpriv); Since rocker_ofdpa_ops does not implement port_post_fini callback (it is NULL), the wpriv memory allocated for each port is never freed when ports are removed. This leads to a memory leak of sizeof(struct ofdpa_port) bytes per port on every device removal. Fix this by always calling kfree(rocker_port->wpriv) regardless of whether the port_post_fini callback exists.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix NULL pointer dereference in amdgpu_gmc_filter_faults_remove On APUs such as Raven and Renoir (GC 9.1.0, 9.2.2, 9.3.0), the ih1 and ih2 interrupt ring buffers are not initialized. This is by design, as these secondary IH rings are only available on discrete GPUs. See vega10_ih_sw_init() which explicitly skips ih1/ih2 initialization when AMD_IS_APU is set. However, amdgpu_gmc_filter_faults_remove() unconditionally uses ih1 to get the timestamp of the last interrupt entry. When retry faults are enabled on APUs (noretry=0), this function is called from the SVM page fault recovery path, resulting in a NULL pointer dereference when amdgpu_ih_decode_iv_ts_helper() attempts to access ih->ring[]. The crash manifests as: BUG: kernel NULL pointer dereference, address: 0000000000000004 RIP: 0010:amdgpu_ih_decode_iv_ts_helper+0x22/0x40 [amdgpu] Call Trace: amdgpu_gmc_filter_faults_remove+0x60/0x130 [amdgpu] svm_r...

In the Linux kernel, the following vulnerability has been resolved: drm/xe/nvm: Fix double-free on aux add failure After a successful auxiliary_device_init(), aux_dev->dev.release (xe_nvm_release_dev()) is responsible for the kfree(nvm). When there is failure with auxiliary_device_add(), driver will call auxiliary_device_uninit(), which call put_device(). So that the .release callback will be triggered to free the memory associated with the auxiliary_device. Move the kfree(nvm) into the auxiliary_device_init() failure path and remove the err goto path to fix below error. " [ 13.232905] ================================================================== [ 13.232911] BUG: KASAN: double-free in xe_nvm_init+0x751/0xf10 [xe] [ 13.233112] Free of addr ffff888120635000 by task systemd-udevd/273 [ 13.233120] CPU: 8 UID: 0 PID: 273 Comm: systemd-udevd Not tainted 6.19.0-rc2-lgci-xe-kernel+ #225 PREEMPT(voluntary) ... [ 13.233125] Call Trace: [ 13.233126] <TASK> [ 13.233127] du...

In the Linux kernel, the following vulnerability has been resolved: mm/shmem, swap: fix race of truncate and swap entry split The helper for shmem swap freeing is not handling the order of swap entries correctly. It uses xa_cmpxchg_irq to erase the swap entry, but it gets the entry order before that using xa_get_order without lock protection, and it may get an outdated order value if the entry is split or changed in other ways after the xa_get_order and before the xa_cmpxchg_irq. And besides, the order could grow and be larger than expected, and cause truncation to erase data beyond the end border. For example, if the target entry and following entries are swapped in or freed, then a large folio was added in place and swapped out, using the same entry, the xa_cmpxchg_irq will still succeed, it's very unlikely to happen though. To fix that, open code the Xarray cmpxchg and put the order retrieval and value checking in the same critical section. Also, ensure the order won't exceed ...

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Fix memory leak in octep_device_setup() In octep_device_setup(), if octep_ctrl_net_init() fails, the function returns directly without unmapping the mapped resources and freeing the allocated configuration memory. Fix this by jumping to the unsupported_dev label, which performs the necessary cleanup. This aligns with the error handling logic of other paths in this function. Compile tested only. Issue found using a prototype static analysis tool and code review.

Inappropriate implementation in WebGPU in Google Chrome prior to 145.0.7632.45 allowed a remote attacker to potentially perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High)

In the Linux kernel, the following vulnerability has been resolved: perf: sched: Fix perf crash with new is_user_task() helper In order to do a user space stacktrace the current task needs to be a user task that has executed in user space. It use to be possible to test if a task is a user task or not by simply checking the task_struct mm field. If it was non NULL, it was a user task and if not it was a kernel task. But things have changed over time, and some kernel tasks now have their own mm field. An idea was made to instead test PF_KTHREAD and two functions were used to wrap this check in case it became more complex to test if a task was a user task or not[1]. But this was rejected and the C code simply checked the PF_KTHREAD directly. It was later found that not all kernel threads set PF_KTHREAD. The io-uring helpers instead set PF_USER_WORKER and this needed to be added as well. But checking the flags is still not enough. There's a very small window when a task exits that it fr...

In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix UAF in configfs release path The gpio-virtuser configfs release path uses guard(mutex) to protect the device structure. However, the device is freed before the guard cleanup runs, causing mutex_unlock() to operate on freed memory. Specifically, gpio_virtuser_device_config_group_release() destroys the mutex and frees the device while still inside the guard(mutex) scope. When the function returns, the guard cleanup invokes mutex_unlock(&dev->lock), resulting in a slab use-after-free. Limit the mutex lifetime by using a scoped_guard() only around the activation check, so that the lock is released before mutex_destroy() and kfree() are called.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not strictly require dirty metadata threshold for metadata writepages [BUG] There is an internal report that over 1000 processes are waiting at the io_schedule_timeout() of balance_dirty_pages(), causing a system hang and trigger a kernel coredump. The kernel is v6.4 kernel based, but the root problem still applies to any upstream kernel before v6.18. [CAUSE] From Jan Kara for his wisdom on the dirty page balance behavior first. This cgroup dirty limit was what was actually playing the role here because the cgroup had only a small amount of memory and so the dirty limit for it was something like 16MB. Dirty throttling is responsible for enforcing that nobody can dirty (significantly) more dirty memory than there's dirty limit. Thus when a task is dirtying pages it periodically enters into balance_dirty_pages() and we let it sleep there to slow down the dirtying. When the system is over dirty limit already ...

In the Linux kernel, the following vulnerability has been resolved: efivarfs: fix error propagation in efivar_entry_get() efivar_entry_get() always returns success even if the underlying __efivar_entry_get() fails, masking errors. This may result in uninitialized heap memory being copied to userspace in the efivarfs_file_read() path. Fix it by returning the error from __efivar_entry_get().