In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Clear the scratch_pt pointer on error Avoid triggering a dereference of an error pointer on cleanup in xe_vm_free_scratch() by clearing any scratch_pt error pointer. (cherry picked from commit 358ee50ab565f3c8ea32480e9d03127a81ba32f8)

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix memory corruption when FW resources change during ifdown bnxt_set_dflt_rings() assumes that it is always called before any TC has been created. So it doesn't take bp->num_tc into account and assumes that it is always 0 or 1. In the FW resource or capability change scenario, the FW will return flags in bnxt_hwrm_if_change() that will cause the driver to reinitialize and call bnxt_cancel_reservations(). This will lead to bnxt_init_dflt_ring_mode() calling bnxt_set_dflt_rings() and bp->num_tc may be greater than 1. This will cause bp->tx_ring[] to be sized too small and cause memory corruption in bnxt_alloc_cp_rings(). Fix it by properly scaling the TX rings by bp->num_tc in the code paths mentioned above. Add 2 helper functions to determine bp->tx_nr_rings and bp->tx_nr_rings_per_tc.

In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-quicki2c: Fix ACPI dsd ICRS/ISUB length The QuickI2C ACPI _DSD methods return ICRS and ISUB data with a trailing byte, making the actual length is one more byte than the structs defined. It caused stack-out-of-bounds and kernel crash: kernel: BUG: KASAN: stack-out-of-bounds in quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: Write of size 12 at addr ffff888106d1f900 by task kworker/u33:2/75 kernel: kernel: CPU: 3 UID: 0 PID: 75 Comm: kworker/u33:2 Not tainted 6.16.0+ #3 PREEMPT(voluntary) kernel: Workqueue: async async_run_entry_fn kernel: Call Trace: kernel: <TASK> kernel: dump_stack_lvl+0x76/0xa0 kernel: print_report+0xd1/0x660 kernel: ? __pfx__raw_spin_lock_irqsave+0x10/0x10 kernel: ? __kasan_slab_free+0x5d/0x80 kernel: ? kasan_addr_to_slab+0xd/0xb0 kernel: kasan_report+0xe1/0x120 kernel: ? quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [int...

In the Linux kernel, the following vulnerability has been resolved: HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version() in ntrig_report_version(), hdev parameter passed from hid_probe(). sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null if hdev->dev.parent->parent is null, usb_dev has invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned when usb_rcvctrlpipe() use usb_dev,it trigger page fault error for address(0xffffffffffffff58) add null check logic to ntrig_report_version() before calling hid_to_usb_dev()

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add error handling for old state CRTC in atomic_disable Introduce error handling to address an issue where, after a hotplug event, the cursor continues to update. This situation can lead to a kernel panic due to accessing the NULL `old_state->crtc`. E,g. Unable to handle kernel NULL pointer dereference at virtual address Call trace: mtk_crtc_plane_disable+0x24/0x140 mtk_plane_atomic_update+0x8c/0xa8 drm_atomic_helper_commit_planes+0x114/0x2c8 drm_atomic_helper_commit_tail_rpm+0x4c/0x158 commit_tail+0xa0/0x168 drm_atomic_helper_commit+0x110/0x120 drm_atomic_commit+0x8c/0xe0 drm_atomic_helper_update_plane+0xd4/0x128 __setplane_atomic+0xcc/0x110 drm_mode_cursor_common+0x250/0x440 drm_mode_cursor_ioctl+0x44/0x70 drm_ioctl+0x264/0x5d8 __arm64_sys_ioctl+0xd8/0x510 invoke_syscall+0x6c/0xe0 do_el0_svc+0x68/0xe8 el0_svc+0x34/0x60 el0t_64_sync_handler+0x1c/0xf8 el0t_64_sync+0x180/0x188 Adding NULL pointer checks...

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix slab out-of-bounds access in mt_report_fixup() A malicious HID device can trigger a slab out-of-bounds during mt_report_fixup() by passing in report descriptor smaller than 607 bytes. mt_report_fixup() attempts to patch byte offset 607 of the descriptor with 0x25 by first checking if byte offset 607 is 0x15 however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it. Below is the KASAN splat after the out of bounds access happens: [ 13.671954] ================================================================== [ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110 [ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10 [ 13.673297] [ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83...

In the Linux kernel, the following vulnerability has been resolved: net: macb: fix unregister_netdev call order in macb_remove() When removing a macb device, the driver calls phy_exit() before unregister_netdev(). This leads to a WARN from kernfs: ------------[ cut here ]------------ kernfs: can not remove 'attached_dev', no directory WARNING: CPU: 1 PID: 27146 at fs/kernfs/dir.c:1683 Call trace: kernfs_remove_by_name_ns+0xd8/0xf0 sysfs_remove_link+0x24/0x58 phy_detach+0x5c/0x168 phy_disconnect+0x4c/0x70 phylink_disconnect_phy+0x6c/0xc0 [phylink] macb_close+0x6c/0x170 [macb] ... macb_remove+0x60/0x168 [macb] platform_remove+0x5c/0x80 ... The warning happens because the PHY is being exited while the netdev is still registered. The correct order is to unregister the netdev before shutting down the PHY and cleaning up the MDIO bus. Fix this by moving unregister_netdev() ahead of phy_exit() in macb_remove().

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: arm64/poly1305: Fix register corruption in no-SIMD contexts Restore the SIMD usability check that was removed by commit a59e5468a921 ("crypto: arm64/poly1305 - Add block-only interface"). This safety check is cheap and is well worth eliminating a footgun. While the Poly1305 functions should not be called when SIMD registers are unusable, if they are anyway, they should just do the right thing instead of corrupting random tasks' registers and/or computing incorrect MACs. Fixing this is also needed for poly1305_kunit to pass. Just use may_use_simd() instead of the original crypto_simd_usable(), since poly1305_kunit won't rely on crypto_simd_disabled_for_test.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Remove WARN_ON_ONCE() call from ufshcd_uic_cmd_compl() The UIC completion interrupt may be disabled while an UIC command is being processed. When the UIC completion interrupt is reenabled, an UIC interrupt is triggered and the WARN_ON_ONCE(!cmd) statement is hit. Hence this patch that removes this kernel warning.

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: arm/poly1305: Fix register corruption in no-SIMD contexts Restore the SIMD usability check that was removed by commit 773426f4771b ("crypto: arm/poly1305 - Add block-only interface"). This safety check is cheap and is well worth eliminating a footgun. While the Poly1305 functions should not be called when SIMD registers are unusable, if they are anyway, they should just do the right thing instead of corrupting random tasks' registers and/or computing incorrect MACs. Fixing this is also needed for poly1305_kunit to pass. Just use may_use_simd() instead of the original crypto_simd_usable(), since poly1305_kunit won't rely on crypto_simd_disabled_for_test.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: Remove WARN_ON for device endpoint command timeouts This commit addresses a rarely observed endpoint command timeout which causes kernel panic due to warn when 'panic_on_warn' is enabled and unnecessary call trace prints when 'panic_on_warn' is disabled. It is seen during fast software-controlled connect/disconnect testcases. The following is one such endpoint command timeout that we observed: 1. Connect ======= ->dwc3_thread_interrupt ->dwc3_ep0_interrupt ->configfs_composite_setup ->composite_setup ->usb_ep_queue ->dwc3_gadget_ep0_queue ->__dwc3_gadget_ep0_queue ->__dwc3_ep0_do_control_data ->dwc3_send_gadget_ep_cmd 2. Disconnect ========== ->dwc3_thread_interrupt ->dwc3_gadget_disconnect_interrupt ->dwc3_ep0_reset_state ->dwc3_ep0_end_control_data ->dwc3_send_gadget_ep_cmd In the issue scenario, in Exynos platforms, we observed that control transfers for the previous connect have not yet been completed...

In the Linux kernel, the following vulnerability has been resolved: btrfs: abort transaction on unexpected eb generation at btrfs_copy_root() If we find an unexpected generation for the extent buffer we are cloning at btrfs_copy_root(), we just WARN_ON() and don't error out and abort the transaction, meaning we allow to persist metadata with an unexpected generation. Instead of warning only, abort the transaction and return -EUCLEAN.

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix the setting of capabilities when automounting a new filesystem Capabilities cannot be inherited when we cross into a new filesystem. They need to be reset to the minimal defaults, and then probed for again.

In the Linux kernel, the following vulnerability has been resolved: xfrm: Duplicate SPI Handling The issue originates when Strongswan initiates an XFRM_MSG_ALLOCSPI Netlink message, which triggers the kernel function xfrm_alloc_spi(). This function is expected to ensure uniqueness of the Security Parameter Index (SPI) for inbound Security Associations (SAs). However, it can return success even when the requested SPI is already in use, leading to duplicate SPIs assigned to multiple inbound SAs, differentiated only by their destination addresses. This behavior causes inconsistencies during SPI lookups for inbound packets. Since the lookup may return an arbitrary SA among those with the same SPI, packet processing can fail, resulting in packet drops. According to RFC 4301 section 4.4.2 , for inbound processing a unicast SA is uniquely identified by the SPI and optionally protocol. Reproducing the Issue Reliably: To consistently reproduce the problem, restrict the available SPI range in...

In the Linux kernel, the following vulnerability has been resolved: net: lapbether: ignore ops-locked netdevs Syzkaller managed to trigger lock dependency in xsk_notify via register_netdevice. As discussed in [0], using register_netdevice in the notifiers is problematic so skip adding lapbeth for ops-locked devices. xsk_notifier+0xa4/0x280 net/xdp/xsk.c:1645 notifier_call_chain+0xbc/0x410 kernel/notifier.c:85 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] unregister_netdevice_many_notify+0xf9d/0x2700 net/core/dev.c:12077 unregister_netdevice_many net/core/dev.c:12140 [inline] unregister_netdevice_queue+0x305/0x3f0 net/core/dev.c:11984 register_netdevice+0x18f1/0x2270 net/core/dev.c:11149 lapbeth_new_device drivers/net/wan/lapbether.c:420 [inline] lapbeth_device_event+0x5b1/0xbe0 drivers/net/wan/lapbether.c:462 notifier_call_chain+0xbc/0x410 kernel/notifier...

In the Linux kernel, the following vulnerability has been resolved: block: avoid possible overflow for chunk_sectors check in blk_stack_limits() In blk_stack_limits(), we check that the t->chunk_sectors value is a multiple of the t->physical_block_size value. However, by finding the chunk_sectors value in bytes, we may overflow the unsigned int which holds chunk_sectors, so change the check to be based on sectors.

In the Linux kernel, the following vulnerability has been resolved: ARM: tegra: Use I/O memcpy to write to IRAM Kasan crashes the kernel trying to check boundaries when using the normal memcpy.

In the Linux kernel, the following vulnerability has been resolved: io_uring/memmap: cast nr_pages to size_t before shifting If the allocated size exceeds UINT_MAX, then it's necessary to cast the mr->nr_pages value to size_t to prevent it from overflowing. In practice this isn't much of a concern as the required memory size will have been validated upfront, and accounted to the user. And > 4GB sizes will be necessary to make the lack of a cast a problem, which greatly exceeds normal user locked_vm settings that are generally in the kb to mb range. However, if root is used, then accounting isn't done, and then it's possible to hit this issue.

In the Linux kernel, the following vulnerability has been resolved: dm: Always split write BIOs to zoned device limits Any zoned DM target that requires zone append emulation will use the block layer zone write plugging. In such case, DM target drivers must not split BIOs using dm_accept_partial_bio() as doing so can potentially lead to deadlocks with queue freeze operations. Regular write operations used to emulate zone append operations also cannot be split by the target driver as that would result in an invalid writen sector value return using the BIO sector. In order for zoned DM target drivers to avoid such incorrect BIO splitting, we must ensure that large BIOs are split before being passed to the map() function of the target, thus guaranteeing that the limits for the mapped device are not exceeded. dm-crypt and dm-flakey are the only target drivers supporting zoned devices and using dm_accept_partial_bio(). In the case of dm-crypt, this function is used to split BIOs to the i...

In the Linux kernel, the following vulnerability has been resolved: dm: dm-crypt: Do not partially accept write BIOs with zoned targets Read and write operations issued to a dm-crypt target may be split according to the dm-crypt internal limits defined by the max_read_size and max_write_size module parameters (default is 128 KB). The intent is to improve processing time of large BIOs by splitting them into smaller operations that can be parallelized on different CPUs. For zoned dm-crypt targets, this BIO splitting is still done but without the parallel execution to ensure that the issuing order of write operations to the underlying devices remains sequential. However, the splitting itself causes other problems: 1) Since dm-crypt relies on the block layer zone write plugging to handle zone append emulation using regular write operations, the reminder of a split write BIO will always be plugged into the target zone write plugged. Once the on-going write BIO finishes, this reminder BIO...