In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set If dma-coherent property isn't set then descriptors are non-cacheable and the iocc shareability bits should be disabled. Without this UFS can end up in an incompatible configuration and suffer from random cache related stability issues.

This CVE has been marked as Rejected by the assigning CNA.

In the Linux kernel, the following vulnerability has been resolved: riscv: module: Fix out-of-bounds relocation access The current code allows rel[j] to access one element past the end of the relocation section. Simplify to num_relocations which is equivalent to the existing size expression.

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix missing check for zpci_create_device() error return The zpci_create_device() function returns an error pointer that needs to be checked before dereferencing it as a struct zpci_dev pointer. Add the missing check in __clp_add() where it was missed when adding the scan_list in the fixed commit. Simply not adding the device to the scan list results in the previous behavior.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: fix out-of-bounds access during multi-link element defragmentation Currently during the multi-link element defragmentation process, the multi-link element length added to the total IEs length when calculating the length of remaining IEs after the multi-link element in cfg80211_defrag_mle(). This could lead to out-of-bounds access if the multi-link element or its corresponding fragment elements are the last elements in the IEs buffer. To address this issue, correctly calculate the remaining IEs length by deducting the multi-link element end offset from total IEs end offset.

In the Linux kernel, the following vulnerability has been resolved: Input: mtk-pmic-keys - fix possible null pointer dereference In mtk_pmic_keys_probe, the regs parameter is only set if the button is parsed in the device tree. However, on hardware where the button is left floating, that node will most likely be removed not to enable that input. In that case the code will try to dereference a null pointer. Let's use the regs struct instead as it is defined for all supported platforms. Note that it is ok setting the key reg even if that latter is disabled as the interrupt won't be enabled anyway.

In the Linux kernel, the following vulnerability has been resolved: staging: bcm2835-camera: Initialise dev in v4l2_dev Commit 42a2f6664e18 ("staging: vc04_services: Move global g_state to vchiq_state") changed mmal_init to pass dev->v4l2_dev.dev to vchiq_mmal_init, however nothing iniitialised dev->v4l2_dev, so we got a NULL pointer dereference. Set dev->v4l2_dev.dev during bcm2835_mmal_probe. The device pointer could be passed into v4l2_device_register to set it, however that also has other effects that would need additional changes.

In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_fifo Prevent st_lsm6dsx_read_fifo from falling in an infinite loop in case pattern_len is equal to zero and the device FIFO is not empty.

In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_tagged_fifo Prevent st_lsm6dsx_read_tagged_fifo from falling in an infinite loop in case pattern_len is equal to zero and the device FIFO is not empty.

In the Linux kernel, the following vulnerability has been resolved: iio: light: opt3001: fix deadlock due to concurrent flag access The threaded IRQ function in this driver is reading the flag twice: once to lock a mutex and once to unlock it. Even though the code setting the flag is designed to prevent it, there are subtle cases where the flag could be true at the mutex_lock stage and false at the mutex_unlock stage. This results in the mutex not being unlocked, resulting in a deadlock. Fix it by making the opt3001_irq() code generally more robust, reading the flag into a variable and using the variable value at both stages.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: displayport: Fix deadlock This patch introduces the ucsi_con_mutex_lock / ucsi_con_mutex_unlock functions to the UCSI driver. ucsi_con_mutex_lock ensures the connector mutex is only locked if a connection is established and the partner pointer is valid. This resolves a deadlock scenario where ucsi_displayport_remove_partner holds con->mutex waiting for dp_altmode_work to complete while dp_altmode_work attempts to acquire it.

In the Linux kernel, the following vulnerability has been resolved: riscv: Fix kernel crash due to PR_SET_TAGGED_ADDR_CTRL When userspace does PR_SET_TAGGED_ADDR_CTRL, but Supm extension is not available, the kernel crashes: Oops - illegal instruction [#1] [snip] epc : set_tagged_addr_ctrl+0x112/0x15a ra : set_tagged_addr_ctrl+0x74/0x15a epc : ffffffff80011ace ra : ffffffff80011a30 sp : ffffffc60039be10 [snip] status: 0000000200000120 badaddr: 0000000010a79073 cause: 0000000000000002 set_tagged_addr_ctrl+0x112/0x15a __riscv_sys_prctl+0x352/0x73c do_trap_ecall_u+0x17c/0x20c andle_exception+0x150/0x15c Fix it by checking if Supm is available.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix invalid context error in dml helper [Why] "BUG: sleeping function called from invalid context" error. after: "drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()" The populate_dml_plane_cfg_from_plane_state() uses the GFP_KERNEL flag for memory allocation, which shouldn't be used in atomic contexts. The allocation is needed only for using another helper function get_scaler_data_for_plane(). [How] Modify helpers to pass a pointer to scaler_data within existing context, eliminating the need for dynamic memory allocation/deallocation and copying. (cherry picked from commit bd3e84bc98f81b44f2c43936bdadc3241d654259)

In the Linux kernel, the following vulnerability has been resolved: x86/mm: Eliminate window where TLB flushes may be inadvertently skipped tl;dr: There is a window in the mm switching code where the new CR3 is set and the CPU should be getting TLB flushes for the new mm. But should_flush_tlb() has a bug and suppresses the flush. Fix it by widening the window where should_flush_tlb() sends an IPI. Long Version: === History === There were a few things leading up to this. First, updating mm_cpumask() was observed to be too expensive, so it was made lazier. But being lazy caused too many unnecessary IPIs to CPUs due to the now-lazy mm_cpumask(). So code was added to cull mm_cpumask() periodically[2]. But that culling was a bit too aggressive and skipped sending TLB flushes to CPUs that need them. So here we are again. === Problem === The too-aggressive code in should_flush_tlb() strikes in this window: // Turn on IPIs for this CPU/mm combination, but only // if should_flush_tlb()...

In the Linux kernel, the following vulnerability has been resolved: arm64: bpf: Only mitigate cBPF programs loaded by unprivileged users Support for eBPF programs loaded by unprivileged users is typically disabled. This means only cBPF programs need to be mitigated for BHB. In addition, only mitigate cBPF programs that were loaded by an unprivileged user. Privileged users can also load the same program via eBPF, making the mitigation pointless.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix memory leak in parse_lease_state() The previous patch that added bounds check for create lease context introduced a memory leak. When the bounds check fails, the function returns NULL without freeing the previously allocated lease_ctx_info structure. This patch fixes the issue by adding kfree(lreq) before returning NULL in both boundary check cases.

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix uninit-value for saddr in do_output_route4 syzbot reports for uninit-value for the saddr argument [1]. commit 4754957f04f5 ("ipvs: do not use random local source address for tunnels") already implies that the input value of saddr should be ignored but the code is still reading it which can prevent to connect the route. Fix it by changing the argument to ret_saddr. [1] BUG: KMSAN: uninit-value in do_output_route4+0x42c/0x4d0 net/netfilter/ipvs/ip_vs_xmit.c:147 do_output_route4+0x42c/0x4d0 net/netfilter/ipvs/ip_vs_xmit.c:147 __ip_vs_get_out_rt+0x403/0x21d0 net/netfilter/ipvs/ip_vs_xmit.c:330 ip_vs_tunnel_xmit+0x205/0x2380 net/netfilter/ipvs/ip_vs_xmit.c:1136 ip_vs_in_hook+0x1aa5/0x35b0 net/netfilter/ipvs/ip_vs_core.c:2063 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf7/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] __ip_local_out+0x758/0x7e0 net/ip...

In the Linux kernel, the following vulnerability has been resolved: memblock: Accept allocated memory before use in memblock_double_array() When increasing the array size in memblock_double_array() and the slab is not yet available, a call to memblock_find_in_range() is used to reserve/allocate memory. However, the range returned may not have been accepted, which can result in a crash when booting an SNP guest: RIP: 0010:memcpy_orig+0x68/0x130 Code: ... RSP: 0000:ffffffff9cc03ce8 EFLAGS: 00010006 RAX: ff11001ff83e5000 RBX: 0000000000000000 RCX: fffffffffffff000 RDX: 0000000000000bc0 RSI: ffffffff9dba8860 RDI: ff11001ff83e5c00 RBP: 0000000000002000 R08: 0000000000000000 R09: 0000000000002000 R10: 000000207fffe000 R11: 0000040000000000 R12: ffffffff9d06ef78 R13: ff11001ff83e5000 R14: ffffffff9dba7c60 R15: 0000000000000c00 memblock_double_array+0xff/0x310 memblock_add_range+0x1fb/0x2f0 memblock_reserve+0x4f/0xa0 memblock_alloc_range_nid+0xac/0x130 memblock_alloc_internal+0x53/0xc0 memb...

In the Linux kernel, the following vulnerability has been resolved: bpf: Scrub packet on bpf_redirect_peer When bpf_redirect_peer is used to redirect packets to a device in another network namespace, the skb isn't scrubbed. That can lead skb information from one namespace to be "misused" in another namespace. As one example, this is causing Cilium to drop traffic when using bpf_redirect_peer to redirect packets that just went through IPsec decryption to a container namespace. The following pwru trace shows (1) the packet path from the host's XFRM layer to the container's XFRM layer where it's dropped and (2) the number of active skb extensions at each function. NETNS MARK IFACE TUPLE FUNC 4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 xfrm_rcv_cb .active_extensions = (__u8)2, 4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 xfrm4_rcv_cb .active_extensions = (__u8)2, 4026533547 d00 eth0 10.244.3.124:35473->10.244...

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix dereferencing invalid pmd migration entry When migrating a THP, concurrent access to the PMD migration entry during a deferred split scan can lead to an invalid address access, as illustrated below. To prevent this invalid access, it is necessary to check the PMD migration entry and return early. In this context, there is no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the equality of the target folio. Since the PMD migration entry is locked, it cannot be served as the target. Mailing list discussion and explanation from Hugh Dickins: "An anon_vma lookup points to a location which may contain the folio of interest, but might instead contain another folio: and weeding out those other folios is precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of replacing the wrong folio" comment a few lines above it) is for." BUG: unable to handle page fault for address: ...