In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: Add NULL check in udma_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, udma_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: Cancel outstanding rescan work when unregistering It's possible to trigger use-after-free here by: (a) forcing rescan_work_func() to take a long time and (b) utilizing a pwrctrl driver that may be unloaded for some reason Cancel outstanding work to ensure it is finished before we allow our data structures to be cleaned up. [bhelgaas: tidy commit log]

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Reorder clock handling and power management in probe Reorder the initialization sequence in `usbhs_probe()` to enable runtime PM before accessing registers, preventing potential crashes due to uninitialized clocks. Currently, in the probe path, registers are accessed before enabling the clocks, leading to a synchronous external abort on the RZ/V2H SoC. The problematic call flow is as follows: usbhs_probe() usbhs_sys_clock_ctrl() usbhs_bset() usbhs_write() iowrite16() <-- Register access before enabling clocks Since `iowrite16()` is performed without ensuring the required clocks are enabled, this can lead to access errors. To fix this, enable PM runtime early in the probe function and ensure clocks are acquired before register access, preventing crashes like the following on RZ/V2H: [13.272640] Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP [13.280814] Modules linke...

In the Linux kernel, the following vulnerability has been resolved: serial: Fix potential null-ptr-deref in mlb_usio_probe() devm_ioremap() can return NULL on error. Currently, mlb_usio_probe() does not check for this case, which could result in a NULL pointer dereference. Add NULL check after devm_ioremap() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: usb: acpi: Prevent null pointer dereference in usb_acpi_add_usb4_devlink() As demonstrated by the fix for update_port_device_state, commit 12783c0b9e2c ("usb: core: Prevent null pointer dereference in update_port_device_state"), usb_hub_to_struct_hub() can return NULL in certain scenarios, such as during hub driver unbind or teardown race conditions, even if the underlying usb_device structure exists. Plus, all other places that call usb_hub_to_struct_hub() in the same file do check for NULL return values. If usb_hub_to_struct_hub() returns NULL, the subsequent access to hub->ports[udev->portnum - 1] will cause a null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4851: fix ad4858 chan pointer handling The pointer returned from ad4851_parse_channels_common() is incremented internally as each channel is populated. In ad4858_parse_channels(), the same pointer was further incremented while setting ext_scan_type fields for each channel. This resulted in indio_dev->channels being set to a pointer past the end of the allocated array, potentially causing memory corruption or undefined behavior. Fix this by iterating over the channels using an explicit index instead of incrementing the pointer. This preserves the original base pointer and ensures all channel metadata is set correctly.

In the Linux kernel, the following vulnerability has been resolved: coresight: holding cscfg_csdev_lock while removing cscfg from csdev There'll be possible race scenario for coresight config: CPU0 CPU1 (perf enable) load module cscfg_load_config_sets() activate config. // sysfs (sys_active_cnt == 1) ... cscfg_csdev_enable_active_config() lock(csdev->cscfg_csdev_lock) deactivate config // sysfs (sys_activec_cnt == 0) cscfg_unload_config_sets() <iterating config_csdev_list> cscfg_remove_owned_csdev_configs() // here load config activate by CPU1 unlock(csdev->cscfg_csdev_lock) iterating config_csdev_list could be raced with config_csdev_list's entry delete. To resolve this race , hold csdev->cscfg_csdev_lock() while cscfg_remove_owned_csdev_configs()

In the Linux kernel, the following vulnerability has been resolved: coresight: prevent deactivate active config while enabling the config While enable active config via cscfg_csdev_enable_active_config(), active config could be deactivated via configfs' sysfs interface. This could make UAF issue in below scenario: CPU0 CPU1 (sysfs enable) load module cscfg_load_config_sets() activate config. // sysfs (sys_active_cnt == 1) ... cscfg_csdev_enable_active_config() lock(csdev->cscfg_csdev_lock) // here load config activate by CPU1 unlock(csdev->cscfg_csdev_lock) deactivate config // sysfs (sys_activec_cnt == 0) cscfg_unload_config_sets() unload module // access to config_desc which freed // while unloading module. cscfg_csdev_enable_config To address this, use cscfg_config_desc's active_cnt as a reference count which will be holded when - activate the config. - enable the activated config. and put the module referenc...

In the Linux kernel, the following vulnerability has been resolved: drm/connector: only call HDMI audio helper plugged cb if non-null On driver remove, sound/soc/codecs/hdmi-codec.c calls the plugged_cb with NULL as the callback function and codec_dev, as seen in its hdmi_remove function. The HDMI audio helper then happily tries calling said null function pointer, and produces an Oops as a result. Fix this by only executing the callback if fn is non-null. This means the .plugged_cb and .plugged_cb_dev members still get appropriately cleared.

In the Linux kernel, the following vulnerability has been resolved: page_pool: Fix use-after-free in page_pool_recycle_in_ring syzbot reported a uaf in page_pool_recycle_in_ring: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 Read of size 8 at addr ffff8880286045a0 by task syz.0.284/6943 CPU: 0 UID: 0 PID: 6943 Comm: syz.0.284 Not tainted 6.13.0-rc3-syzkaller-gdfa94ce54f41 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:165 [inline] _raw_spin_unlock_bh+0x1b/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396...

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: reject malformed HCI_CMD_SYNC commands In 'mgmt_hci_cmd_sync()', check whether the size of parameters passed in 'struct mgmt_cp_hci_cmd_sync' matches the total size of the data (i.e. 'sizeof(struct mgmt_cp_hci_cmd_sync)' plus trailing bytes). Otherwise, large invalid 'params_len' will cause 'hci_cmd_sync_alloc()' to do 'skb_put_data()' from an area beyond the one actually passed to 'mgmt_hci_cmd_sync()'.

In the Linux kernel, the following vulnerability has been resolved: ice: fix Tx scheduler error handling in XDP callback When the XDP program is loaded, the XDP callback adds new Tx queues. This means that the callback must update the Tx scheduler with the new queue number. In the event of a Tx scheduler failure, the XDP callback should also fail and roll back any changes previously made for XDP preparation. The previous implementation had a bug that not all changes made by the XDP callback were rolled back. This caused the crash with the following call trace: [ +9.549584] ice 0000:ca:00.0: Failed VSI LAN queue config for XDP, error: -5 [ +0.382335] Oops: general protection fault, probably for non-canonical address 0x50a2250a90495525: 0000 [#1] SMP NOPTI [ +0.010710] CPU: 103 UID: 0 PID: 0 Comm: swapper/103 Not tainted 6.14.0-net-next-mar-31+ #14 PREEMPT(voluntary) [ +0.010175] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/...

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: make sure that ptp_rate is not 0 before configuring timestamping The stmmac platform drivers that do not open-code the clk_ptp_rate value after having retrieved the default one from the device-tree can end up with 0 in clk_ptp_rate (as clk_get_rate can return 0). It will eventually propagate up to PTP initialization when bringing up the interface, leading to a divide by 0: Division by zero in kernel. CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.30-00001-g48313bd5768a #22 Hardware name: STM32 (Device Tree Support) Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x6c/0x8c dump_stack_lvl from Ldiv0_64+0x8/0x18 Ldiv0_64 from stmmac_init_tstamp_counter+0x190/0x1a4 stmmac_init_tstamp_counter from stmmac_hw_setup+0xc1c/0x111c stmmac_hw_setup from __stmmac_open+0x18c/0x434 __stmmac_open from stmmac_open+0x3c/0xbc stmmac_open from __dev_open+0xf4/0x1ac __dev_open fr...

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: make sure that ptp_rate is not 0 before configuring EST If the ptp_rate recorded earlier in the driver happens to be 0, this bogus value will propagate up to EST configuration, where it will trigger a division by 0. Prevent this division by 0 by adding the corresponding check and error code.

In the Linux kernel, the following vulnerability has been resolved: net: fix udp gso skb_segment after pull from frag_list Commit a1e40ac5b5e9 ("net: gso: fix udp gso fraglist segmentation after pull from frag_list") detected invalid geometry in frag_list skbs and redirects them from skb_segment_list to more robust skb_segment. But some packets with modified geometry can also hit bugs in that code. We don't know how many such cases exist. Addressing each one by one also requires touching the complex skb_segment code, which risks introducing bugs for other types of skbs. Instead, linearize all these packets that fail the basic invariants on gso fraglist skbs. That is more robust. If only part of the fraglist payload is pulled into head_skb, it will always cause exception when splitting skbs by skb_segment. For detailed call stack information, see below. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or...

In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: Fix napi rx poll issue When driver handles the napi rx polling requests, the netdev might have been released by the dellink logic triggered by the disconnect operation on user plane. However, in the logic of processing skb in polling, an invalid netdev is still being used, which causes a panic. BUG: kernel NULL pointer dereference, address: 00000000000000f1 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:dev_gro_receive+0x3a/0x620 [...] Call Trace: <IRQ> ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x4f/0xa0 ? asm_exc_page_fault+0x22/0x30 ? __pfx_t7xx_ccmni_recv_skb+0x10/0x10 [mtk_t7xx (HASH:1400 7)] ? dev_gro_receive+0x3a/0x620 napi_gro_receive+0xad/0x170 t7xx_ccmni_recv_skb+0x48/0x70 [mtk_t7xx (HASH:1400 7)] t7xx_dpmaif_napi_rx_poll+0x590/0x800 [mtk_t7xx (HASH:1400 7)] net_rx_action+0x103/0x470 irq_exit_rcu+0x13a/0x310 sysvec_apic_timer_interrupt+0x56/0x90 </IRQ>

In the Linux kernel, the following vulnerability has been resolved: gve: add missing NULL check for gve_alloc_pending_packet() in TX DQO gve_alloc_pending_packet() can return NULL, but gve_tx_add_skb_dqo() did not check for this case before dereferencing the returned pointer. Add a missing NULL check to prevent a potential NULL pointer dereference when allocation fails. This improves robustness in low-memory scenarios.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: avoid panic on init failure In case of an error during init, in_hw_restart will be set, but it will never get cleared. Instead, we will retry to init again, and then we will act like we are in a restart when we are actually not. This causes (among others) to a NULL pointer dereference when canceling rx_omi::finished_work, that was not even initialized, because we thought that we are in hw_restart. Set in_hw_restart to true only if the fw is running, then we know that FW was loaded successfully and we are not going to the retry loop.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_set_pipapo_avx2: fix initial map fill If the first field doesn't cover the entire start map, then we must zero out the remainder, else we leak those bits into the next match round map. The early fix was incomplete and did only fix up the generic C implementation. A followup patch adds a test case to nft_concat_range.sh.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: ufs: Fix a hang in the error handler ufshcd_err_handling_prepare() calls ufshcd_rpm_get_sync(). The latter function can only succeed if UFSHCD_EH_IN_PROGRESS is not set because resuming involves submitting a SCSI command and ufshcd_queuecommand() returns SCSI_MLQUEUE_HOST_BUSY if UFSHCD_EH_IN_PROGRESS is set. Fix this hang by setting UFSHCD_EH_IN_PROGRESS after ufshcd_rpm_get_sync() has been called instead of before. Backtrace: __switch_to+0x174/0x338 __schedule+0x600/0x9e4 schedule+0x7c/0xe8 schedule_timeout+0xa4/0x1c8 io_schedule_timeout+0x48/0x70 wait_for_common_io+0xa8/0x160 //waiting on START_STOP wait_for_completion_io_timeout+0x10/0x20 blk_execute_rq+0xe4/0x1e4 scsi_execute_cmd+0x108/0x244 ufshcd_set_dev_pwr_mode+0xe8/0x250 __ufshcd_wl_resume+0x94/0x354 ufshcd_wl_runtime_resume+0x3c/0x174 scsi_runtime_resume+0x64/0xa4 rpm_resume+0x15c/0xa1c __pm_runtime_resume+0x4c/0x90 // Runtime resume ongoing u...