In the Linux kernel, the following vulnerability has been resolved: wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release plfxlc_mac_release() asserts that mac->lock is held. This assertion is incorrect, because even if it was possible, it would not be the valid behaviour. The function is used when probe fails or after the device is disconnected. In both cases mac->lock can not be held as the driver is not working with the device at the moment. All functions that use mac->lock unlock it just after it was held. There is also no need to hold mac->lock for plfxlc_mac_release() itself, as mac data is not affected, except for mac->flags, which is modified atomically. This bug leads to the following warning: ================================================================ WARNING: CPU: 0 PID: 127 at drivers/net/wireless/purelifi/plfxlc/mac.c:106 plfxlc_mac_release+0x7d/0xa0 Modules linked in: CPU: 0 PID: 127 Comm: kworker/0:2 Not tainted 6.1.124-syzkaller #0 Hardware name: Google Go...

In the Linux kernel, the following vulnerability has been resolved: spi: spi-mem: Add fix to avoid divide error For some SPI flash memory operations, dummy bytes are not mandatory. For example, in Winbond SPINAND flash memory devices, the `write_cache` and `update_cache` operation variants have zero dummy bytes. Calculating the duration for SPI memory operations with zero dummy bytes causes a divide error when `ncycles` is calculated in the spi_mem_calc_op_duration(). Add changes to skip the 'ncylcles' calculation for zero dummy bytes. Following divide error is fixed by this change: Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI ... ? do_trap+0xdb/0x100 ? do_error_trap+0x75/0xb0 ? spi_mem_calc_op_duration+0x56/0xb0 ? exc_divide_error+0x3b/0x70 ? spi_mem_calc_op_duration+0x56/0xb0 ? asm_exc_divide_error+0x1b/0x20 ? spi_mem_calc_op_duration+0x56/0xb0 ? spinand_select_op_variant+0xee/0x190 [spinand] spinand_match_and_init+0x13e/0x1a0 [spinand] spinand_manufacturer_match+0x6e/0xa0 [spi...

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix error handling path in bnxt_init_chip() WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails because we call cancel_work_sync() on dim work that has not been initialized. WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230 The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim work has already been cancelled. But in the bnxt_open() path, BNXT_STATE_NAPI_DISABLED is not set and this causes the error path to think that it needs to cancel the uninitalized dim work. Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization. The bit will be cleared when we enable NAPI and initialize dim work.

In the Linux kernel, the following vulnerability has been resolved: net: use sock_gen_put() when sk_state is TCP_TIME_WAIT It is possible for a pointer of type struct inet_timewait_sock to be returned from the functions __inet_lookup_established() and __inet6_lookup_established(). This can cause a crash when the returned pointer is of type struct inet_timewait_sock and sock_put() is called on it. The following is a crash call stack that shows sk->sk_wmem_alloc being accessed in sk_free() during the call to sock_put() on a struct inet_timewait_sock pointer. To avoid this issue, use sock_gen_put() instead of sock_put() when sk->sk_state is TCP_TIME_WAIT. mrdump.ko ipanic() + 120 vmlinux notifier_call_chain(nr_to_call=-1, nr_calls=0) + 132 vmlinux atomic_notifier_call_chain(val=0) + 56 vmlinux panic() + 344 vmlinux add_taint() + 164 vmlinux end_report() + 136 vmlinux kasan_report(size=0) + 236 vmlinux report_tag_faul...

In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Fix off-by-one error in build_prologue() Vincent reported that running BPF progs with tailcalls on LoongArch causes kernel hard lockup. Debugging the issues shows that the JITed image missing a jirl instruction at the end of the epilogue. There are two passes in JIT compiling, the first pass set the flags and the second pass generates JIT code based on those flags. With BPF progs mixing bpf2bpf and tailcalls, build_prologue() generates N insns in the first pass and then generates N+1 insns in the second pass. This makes epilogue_offset off by one and we will jump to some unexpected insn and cause lockup. Fix this by inserting a nop insn.

In the Linux kernel, the following vulnerability has been resolved: mtd: inftlcore: Add error check for inftl_read_oob() In INFTL_findwriteunit(), the return value of inftl_read_oob() need to be checked. A proper implementation can be found in INFTL_deleteblock(). The status will be set as SECTOR_IGNORE to break from the while-loop correctly if the inftl_read_oob() fails.

In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: Fix buffer overflow at UMP SysEx message conversion The conversion function from MIDI 1.0 to UMP packet contains an internal buffer to keep the incoming MIDI bytes, and its size is 4, as it was supposed to be the max size for a MIDI1 UMP packet data. However, the implementation overlooked that SysEx is handled in a different format, and it can be up to 6 bytes, as found in do_convert_to_ump(). It leads eventually to a buffer overflow, and may corrupt the memory when a longer SysEx message is received. The fix is simply to extend the buffer size to 6 to fit with the SysEx UMP message.

In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdisc As described in Gerrard's report [1], we have a UAF case when an hfsc class has a netem child qdisc. The crux of the issue is that hfsc is assuming that checking for cl->qdisc->q.qlen == 0 guarantees that it hasn't inserted the class in the vttree or eltree (which is not true for the netem duplicate case). This patch checks the n_active class variable to make sure that the code won't insert the class in the vttree or eltree twice, catering for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Consistently treat platform_max as control value This reverts commit 9bdd10d57a88 ("ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min"), and makes some additional related updates. There are two ways the platform_max could be interpreted; the maximum register value, or the maximum value the control can be set to. The patch moved from treating the value as a control value to a register one. When the patch was applied it was technically correct as snd_soc_limit_volume() also used the register interpretation. However, even then most of the other usages treated platform_max as a control value, and snd_soc_limit_volume() has since been updated to also do so in commit fb9ad24485087 ("ASoC: ops: add correct range check for limiting volume"). That patch however, missed updating snd_soc_put_volsw() back to the control interpretation, and fixing snd_soc_info_volsw_range(). The control interpretation make...

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix null-ptr-deref in mlx5_create_{inner_,}ttc_table() Add NULL check for mlx5_get_flow_namespace() returns in mlx5_create_inner_ttc_table() and mlx5_create_ttc_table() to prevent NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL result If the FW doesn't support the PDS_CORE_CMD_FW_CONTROL command the driver might at the least print garbage and at the worst crash when the user runs the "devlink dev info" devlink command. This happens because the stack variable fw_list is not 0 initialized which results in fw_list.num_fw_slots being a garbage value from the stack. Then the driver tries to access fw_list.fw_names[i] with i >= ARRAY_SIZE and runs off the end of the array. Fix this by initializing the fw_list and by not failing completely if the devcmd fails because other useful information is printed via devlink dev info even if the devcmd fails.

In the Linux kernel, the following vulnerability has been resolved: pds_core: make wait_context part of q_info Make the wait_context a full part of the q_info struct rather than a stack variable that goes away after pdsc_adminq_post() is done so that the context is still available after the wait loop has given up. There was a case where a slow development firmware caused the adminq request to time out, but then later the FW finally finished the request and sent the interrupt. The handler tried to complete_all() the completion context that had been created on the stack in pdsc_adminq_post() but no longer existed. This caused bad pointer usage, kernel crashes, and much wailing and gnashing of teeth.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Reset IRTE to host control if *new* route isn't postable Restore an IRTE back to host control (remapped or posted MSI mode) if the *new* GSI route prevents posting the IRQ directly to a vCPU, regardless of the GSI routing type. Updating the IRTE if and only if the new GSI is an MSI results in KVM leaving an IRTE posting to a vCPU. The dangling IRTE can result in interrupts being incorrectly delivered to the guest, and in the worst case scenario can result in use-after-free, e.g. if the VM is torn down, but the underlying host IRQ isn't freed.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix deadlock between rcu_tasks_trace and event_mutex. Fix the following deadlock: CPU A _free_event() perf_kprobe_destroy() mutex_lock(&event_mutex) perf_trace_event_unreg() synchronize_rcu_tasks_trace() There are several paths where _free_event() grabs event_mutex and calls sync_rcu_tasks_trace. Above is one such case. CPU B bpf_prog_test_run_syscall() rcu_read_lock_trace() bpf_prog_run_pin_on_cpu() bpf_prog_load() bpf_tracing_func_proto() trace_set_clr_event() mutex_lock(&event_mutex) Delegate trace_set_clr_event() to workqueue to avoid such lock dependency.

In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Add check for get_zeroed_page() Add check for the return value of get_zeroed_page() in sclp_console_init() to prevent null pointer dereference. Furthermore, to solve the memory leak caused by the loop allocation, add a free helper to do the free job.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix isochronous Ring Underrun/Overrun event handling The TRB pointer of these events points at enqueue at the time of error occurrence on xHCI 1.1+ HCs or it's NULL on older ones. By the time we are handling the event, a new TD may be queued at this ring position. I can trigger this race by rising interrupt moderation to increase IRQ handling delay. Similar delay may occur naturally due to system load. If this ever happens after a Missed Service Error, missed TDs will be skipped and the new TD processed as if it matched the event. It could be given back prematurely, risking data loss or buffer UAF by the xHC. Don't complete TDs on xrun events and don't warn if queued TDs don't match the event's TRB pointer, which can be NULL or a link/no-op TRB. Don't warn if there are no queued TDs at all. Now that it's safe, also handle xrun events if the skip flag is clear. This ensures completion of any TD stuck in 'e...

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev() The variable d->name, returned by devm_kasprintf(), could be NULL. A pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02 ("ice: Fix some null pointer dereference issues in ice_ptp.c"). This issue is found by our static analysis tool

In the Linux kernel, the following vulnerability has been resolved: um: work around sched_yield not yielding in time-travel mode sched_yield by a userspace may not actually cause scheduling in time-travel mode as no time has passed. In the case seen it appears to be a badly implemented userspace spinlock in ASAN. Unfortunately, with time-travel it causes an extreme slowdown or even deadlock depending on the kernel configuration (CONFIG_UML_MAX_USERSPACE_ITERATIONS). Work around it by accounting time to the process whenever it executes a sched_yield syscall.

In the Linux kernel, the following vulnerability has been resolved: 9p/net: fix improper handling of bogus negative read/write replies In p9_client_write() and p9_client_read_once(), if the server incorrectly replies with success but a negative write/read count then we would consider written (negative) <= rsize (positive) because both variables were signed. Make variables unsigned to avoid this problem. The reproducer linked below now fails with the following error instead of a null pointer deref: 9pnet: bogus RWRITE count (4294967295 > 3)

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix WARN_ON(!ctx) in __free_event() for partial init Move the get_ctx(child_ctx) call and the child_event->ctx assignment to occur immediately after the child event is allocated. Ensure that child_event->ctx is non-NULL before any subsequent error path within inherit_event calls free_event(), satisfying the assumptions of the cleanup code. Details: There's no clear Fixes tag, because this bug is a side-effect of multiple interacting commits over time (up to 15 years old), not a single regression. The code initially incremented refcount then assigned context immediately after the child_event was created. Later, an early validity check for child_event was added before the refcount/assignment. Even later, a WARN_ON_ONCE() cleanup check was added, assuming event->ctx is valid if the pmu_ctx is valid. The problem is that the WARN_ON_ONCE() could trigger after the initial check passed but before child_event->ct...