In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: use ieee80211_purge_tx_queue() to purge TX skb When removing kernel modules by: rmmod rtw88_8723cs rtw88_8703b rtw88_8723x rtw88_sdio rtw88_core Driver uses skb_queue_purge() to purge TX skb, but not report tx status causing "Have pending ack frames!" warning. Use ieee80211_purge_tx_queue() to correct this. Since ieee80211_purge_tx_queue() doesn't take locks, to prevent racing between TX work and purge TX queue, flush and destroy TX work in advance. wlan0: deauthenticating from aa:f5:fd:60:4c:a8 by local choice (Reason: 3=DEAUTH_LEAVING) ------------[ cut here ]------------ Have pending ack frames! WARNING: CPU: 3 PID: 9232 at net/mac80211/main.c:1691 ieee80211_free_ack_frame+0x5c/0x90 [mac80211] CPU: 3 PID: 9232 Comm: rmmod Tainted: G C 6.10.1-200.fc40.aarch64 #1 Hardware name: pine64 Pine64 PinePhone Braveheart (1.1)/Pine64 PinePhone Braveheart (1.1), BIOS 2024.01 01/01/2024 pstate: 60400005 (...

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds access in 'dcn21_link_encoder_create' An issue was identified in the dcn21_link_encoder_create function where an out-of-bounds access could occur when the hpd_source index was used to reference the link_enc_hpd_regs array. This array has a fixed size and the index was not being checked against the array's bounds before accessing it. This fix adds a conditional check to ensure that the hpd_source index is within the valid range of the link_enc_hpd_regs array. If the index is out of bounds, the function now returns NULL to prevent undefined behavior. References: [ 65.920507] ------------[ cut here ]------------ [ 65.920510] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn21/dcn21_resource.c:1312:29 [ 65.920519] index 7 is out of range for type 'dcn10_link_enc_hpd_registers [5]' [ 65.920523] CPU: 3 PID: 1178 Comm: modprobe Tainted: G ...

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix atomic calls in ath12k_mac_op_set_bitrate_mask() When I try to manually set bitrates: iw wlan0 set bitrates legacy-2.4 1 I get sleeping from invalid context error, see below. Fix that by switching to use recently introduced ieee80211_iterate_stations_mtx(). Do note that WCN6855 firmware is still crashing, I'm not sure if that firmware even supports bitrate WMI commands and should we consider disabling ath12k_mac_op_set_bitrate_mask() for WCN6855? But that's for another patch. BUG: sleeping function called from invalid context at drivers/net/wireless/ath/ath12k/wmi.c:420 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 2236, name: iw preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 3 locks held by iw/2236: #0: ffffffffabc6f1d8 (cb_lock){++++}-{3:3}, at: genl_rcv+0x14/0x40 #1: ffff888138410810 (&rdev->wiphy.mtx){+.+.}-{3:3}, at: nl80211_pre_doit+0x54d/0x800 [cfg80211] #2: ffffffffab...

In the Linux kernel, the following vulnerability has been resolved: af_packet: avoid erroring out after sock_init_data() in packet_create() After sock_init_data() the allocated sk object is attached to the provided sock object. On error, packet_create() frees the sk object leaving the dangling pointer in the sock object on return. Some other code may try to use this pointer and cause use-after-free.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create() bt_sock_alloc() allocates the sk object and attaches it to the provided sock object. On error l2cap_sock_alloc() frees the sk object, but the dangling pointer is still attached to the sock object, which may create use-after-free in other code.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: avoid leaving dangling sk pointer in rfcomm_sock_alloc() bt_sock_alloc() attaches allocated sk object to the provided sock object. If rfcomm_dlc_alloc() fails, we release the sk object, but leave the dangling pointer in the sock object, which may cause use-after-free. Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc().

In the Linux kernel, the following vulnerability has been resolved: net: af_can: do not leave a dangling sk pointer in can_create() On error can_create() frees the allocated sk object, but sock_init_data() has already attached it to the provided sock object. This will leave a dangling sk pointer in the sock object and may cause use-after-free later.

In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: do not leave a dangling sk pointer in ieee802154_create() sock_init_data() attaches the allocated sk object to the provided sock object. If ieee802154_create() fails later, the allocated sk object is freed, but the dangling pointer remains in the provided sock object, which may allow use-after-free. Clear the sk pointer in the sock object on error.

In the Linux kernel, the following vulnerability has been resolved: net: inet: do not leave a dangling sk pointer in inet_create() sock_init_data() attaches the allocated sk object to the provided sock object. If inet_create() fails later, the sk object is freed, but the sock object retains the dangling pointer, which may create use-after-free later. Clear the sk pointer in the sock object on error.

In the Linux kernel, the following vulnerability has been resolved: net: inet6: do not leave a dangling sk pointer in inet6_create() sock_init_data() attaches the allocated sk pointer to the provided sock object. If inet6_create() fails later, the sk object is released, but the sock object retains the dangling sk pointer, which may cause use-after-free later. Clear the sock sk pointer on error.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: avoid NULL pointer error during sdio remove When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON is set to yes, kernel panic will happen: Call trace: destroy_workqueue+0x1c/0x258 ath10k_sdio_remove+0x84/0x94 sdio_bus_remove+0x50/0x16c device_release_driver_internal+0x188/0x25c device_driver_detach+0x20/0x2c This is because during 'rmmod ath10k', ath10k_sdio_remove() will call ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release() will finally be called in ath10k_core_destroy(). This function will free struct cfg80211_registered_device *rdev and all its members, including wiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio workqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON. After device release, destroy_workqueue() will use NULL pointer then the kernel panic happen. Call...

In the Linux kernel, the following vulnerability has been resolved: jfs: array-index-out-of-bounds fix in dtReadFirst The value of stbl can be sometimes out of bounds due to a bad filesystem. Added a check with appopriate return of error code in that case.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix shift-out-of-bounds in dbSplit When dmt_budmin is less than zero, it causes errors in the later stages. Added a check to return an error beforehand in dbAllocCtl itself.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in jfs_readdir The stbl might contain some invalid values. Added a check to return error code in that case.

In the Linux kernel, the following vulnerability has been resolved: jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree When the value of lp is 0 at the beginning of the for loop, it will become negative in the next assignment and we should bail out.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: set the right AMDGPU sg segment limitation The driver needs to set the correct max_segment_size; otherwise debug_dma_map_sg() will complain about the over-mapping of the AMDGPU sg length as following: WARNING: CPU: 6 PID: 1964 at kernel/dma/debug.c:1178 debug_dma_map_sg+0x2dc/0x370 [ 364.049444] Modules linked in: veth amdgpu(OE) amdxcp drm_exec gpu_sched drm_buddy drm_ttm_helper ttm(OE) drm_suballoc_helper drm_display_helper drm_kms_helper i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo iptable_nat xt_addrtype iptable_filter br_netfilter nvme_fabrics overlay nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c bridge stp llc amd_atl intel_rapl_msr intel_rapl_common sunrpc sch_fq_codel snd_hda_codec_realtek snd_hda_codec_generic snd_hda_scodec_compone...

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs are sent from the pkt queue. The problem is the number of entries in the pre-allocated sgtable, it is nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1. Given the default [rt]xglom_size=32 it's actually 35 which is too small. Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB is added for each original SKB if tailroom isn't enough to hold tail_pad. At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop" in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return NULL and this causes the oops. The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle the worst-cas...

In the Linux kernel, the following vulnerability has been resolved: bpf: Call free_htab_elem() after htab_unlock_bucket() For htab of maps, when the map is removed from the htab, it may hold the last reference of the map. bpf_map_fd_put_ptr() will invoke bpf_map_free_id() to free the id of the removed map element. However, bpf_map_fd_put_ptr() is invoked while holding a bucket lock (raw_spin_lock_t), and bpf_map_free_id() attempts to acquire map_idr_lock (spinlock_t), triggering the following lockdep warning: ============================= [ BUG: Invalid wait context ] 6.11.0-rc4+ #49 Not tainted ----------------------------- test_maps/4881 is trying to lock: ffffffff84884578 (map_idr_lock){+...}-{3:3}, at: bpf_map_free_id.part.0+0x21/0x70 other info that might help us debug this: context-{5:5} 2 locks held by test_maps/4881: #0: ffffffff846caf60 (rcu_read_lock){....}-{1:3}, at: bpf_fd_htab_map_update_elem+0xf9/0x270 #1: ffff888149ced148 (&htab->lockdep_key#2){....}-{2:2}, at: htab_m...

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Use disable_delayed_work_sync This makes use of disable_delayed_work_sync instead cancel_delayed_work_sync as it not only cancel the ongoing work but also disables new submit which is disarable since the object holding the work is about to be freed.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix not checking skb length on hci_acldata_packet This fixes not checking if skb really contains an ACL header otherwise the code may attempt to access some uninitilized/invalid memory past the valid skb->data.