In the Linux kernel, the following vulnerability has been resolved: nvmet: Don't overflow subsysnqn nvmet_root_discovery_nqn_store treats the subsysnqn string like a fixed size buffer, even though it is dynamically allocated to the size of the string. Create a new string with kstrndup instead of using the old buffer.

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init() Under certain kernel configurations when building with Clang/LLVM, the compiler does not generate a return or jump as the terminator instruction for ip_vs_protocol_init(), triggering the following objtool warning during build time: vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6() At runtime, this either causes an oops when trying to load the ipvs module or a boot-time panic if ipvs is built-in. This same issue has been reported by the Intel kernel test robot previously. Digging deeper into both LLVM and the kernel code reveals this to be a undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer of 64 chars to store the registered protocol names and leaves it uninitialized after definition. The function calls strnlen() when concatenating protocol...

File upload logic in Apache Struts is flawed. An attacker can manipulate file upload params to enable paths traversal and under some circumstances this can lead to uploading a malicious file which can be used to perform Remote Code Execution. This issue affects Apache Struts: from 2.0.0 before 6.4.0. Users are recommended to upgrade to version 6.4.0 at least and migrate to the new file upload mechanism https://struts.apache.org/core-developers/file-upload . If you are not using an old file upload logic based on FileuploadInterceptor your application is safe. You can find more details in  https://cwiki.apache.org/confluence/display/WW/S2-067

GNU objdump 2.43 is vulnerable to Buffer Overflow in the BFD (Binary File Descriptor) library's handling of tekhex format files.

iperf v3.17.1 was discovered to contain a segmentation violation via the iperf_exchange_parameters() function.

decNumberCopy in decNumber.c in jq through 1.7.1 does not properly consider that NaN is interpreted as numeric, which has a resultant stack-based buffer overflow and out-of-bounds write, as demonstrated by use of --slurp with subtraction, such as a filter of .-. when the input has a certain form of digit string with NaN (e.g., "1 NaN123" immediately followed by many more digits).

A heap-buffer-overflow vulnerability was discovered in the SkipSpacesAndLineEnd function in Assimp v5.4.3. This issue occurs when processing certain malformed MD5 model files, leading to an out-of-bounds read and potential application crash.

Prism (aka PrismJS) through 1.29.0 allows DOM Clobbering (with resultant XSS for untrusted input that contains HTML but does not directly contain JavaScript), because document.currentScript lookup can be shadowed by attacker-injected HTML elements.

Envoy is a cloud-native high-performance edge/middle/service proxy. In affected versions envoy does not properly handle http 1.1 non-101 1xx responses. This can lead to downstream failures in networked devices. This issue has been addressed in versions 1.31.5 and 1.32.3. Users are advised to upgrade. There are no known workarounds for this issue.

Envoy is a cloud-native high-performance edge/middle/service proxy. In affected versions `sendOverloadError` is going to assume the active request exists when `envoy.load_shed_points.http1_server_abort_dispatch` is configured. If `active_request` is nullptr, only onMessageBeginImpl() is called. However, the `onMessageBeginImpl` will directly return ok status if the stream is already reset leading to the nullptr reference. The downstream reset can actually happen during the H/2 upstream reset. As a result envoy may crash. This issue has been addressed in releases 1.32.3, 1.31.5, 1.30.9, and 1.29.12. Users are advised to upgrade. Users unable to upgrade may disable `http1_server_abort_dispatch` load shed point and/or use a high threshold.

Envoy is a cloud-native high-performance edge/middle/service proxy. When additional address are not ip addresses, then the Happy Eyeballs sorting algorithm will crash in data plane. This issue has been addressed in releases 1.32.2, 1.31.4, and 1.30.8. Users are advised to upgrade. Users unable to upgrade may disable Happy Eyeballs and/or change the IP configuration.

Git LFS is a Git extension for versioning large files. When Git LFS requests credentials from Git for a remote host, it passes portions of the host's URL to the `git-credential(1)` command without checking for embedded line-ending control characters, and then sends any credentials it receives back from the Git credential helper to the remote host. By inserting URL-encoded control characters such as line feed (LF) or carriage return (CR) characters into the URL, an attacker may be able to retrieve a user's Git credentials. This problem exists in all previous versions and is patched in v3.6.1. All users should upgrade to v3.6.1. There are no workarounds known at this time.

quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2.

In the Linux kernel, the following vulnerability has been resolved: x86/xen: don't do PV iret hypercall through hypercall page Instead of jumping to the Xen hypercall page for doing the iret hypercall, directly code the required sequence in xen-asm.S. This is done in preparation of no longer using hypercall page at all, as it has shown to cause problems with speculation mitigations. This is part of XSA-466 / CVE-2024-53241.

In the Linux kernel, the following vulnerability has been resolved: xen/netfront: fix crash when removing device When removing a netfront device directly after a suspend/resume cycle it might happen that the queues have not been setup again, causing a crash during the attempt to stop the queues another time. Fix that by checking the queues are existing before trying to stop them. This is XSA-465 / CVE-2024-53240.

In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: Release resources at card release The current 6fire code tries to release the resources right after the call of usb6fire_chip_abort(). But at this moment, the card object might be still in use (as we're calling snd_card_free_when_closed()). For avoid potential UAFs, move the release of resources to the card's private_free instead of the manual call of usb6fire_chip_destroy() at the USB disconnect callback.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: adjust the position to init iso data anchor MediaTek iso data anchor init should be moved to where MediaTek claims iso data interface. If there is an unexpected BT usb disconnect during setup flow, it will cause a NULL pointer crash issue when releasing iso anchor since the anchor wasn't been init yet. Adjust the position to do iso data anchor init. [ 17.137991] pc : usb_kill_anchored_urbs+0x60/0x168 [ 17.137998] lr : usb_kill_anchored_urbs+0x44/0x168 [ 17.137999] sp : ffffffc0890cb5f0 [ 17.138000] x29: ffffffc0890cb5f0 x28: ffffff80bb6c2e80 [ 17.144081] gpio gpiochip0: registered chardev handle for 1 lines [ 17.148421] x27: 0000000000000000 [ 17.148422] x26: ffffffd301ff4298 x25: 0000000000000003 x24: 00000000000000f0 [ 17.148424] x23: 0000000000000000 x22: 00000000ffffffff x21: 0000000000000001 [ 17.148425] x20: ffffffffffffffd8 x19: ffffff80c0f25560 x18: 0000000000000000 [ 1...

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix use-after-free in device_for_each_child() Syzbot has reported the following KASAN splat: BUG: KASAN: slab-use-after-free in device_for_each_child+0x18f/0x1a0 Read of size 8 at addr ffff88801f605308 by task kbnepd bnep0/4980 CPU: 0 UID: 0 PID: 4980 Comm: kbnepd bnep0 Not tainted 6.12.0-rc4-00161-gae90f6a6170d #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 ? device_for_each_child+0x18f/0x1a0 print_report+0x13a/0x4cb ? __virt_addr_valid+0x5e/0x590 ? __phys_addr+0xc6/0x150 ? device_for_each_child+0x18f/0x1a0 kasan_report+0xda/0x110 ? device_for_each_child+0x18f/0x1a0 ? __pfx_dev_memalloc_noio+0x10/0x10 device_for_each_child+0x18f/0x1a0 ? __pfx_device_for_each_child+0x10/0x10 pm_runtime_set_memalloc_noio+0xf2/0x180 netdev_unregister_kobject+0x1ed/0x270 unregister_netdevice_many_notify+0x123c/0x1d80 ? __mutex_trylock_comm...

In the Linux kernel, the following vulnerability has been resolved: xsk: Free skb when TX metadata options are invalid When a new skb is allocated for transmitting an xsk descriptor, i.e., for every non-multibuf descriptor or the first frag of a multibuf descriptor, but the descriptor is later found to have invalid options set for the TX metadata, the new skb is never freed. This can leak skbs until the send buffer is full which makes sending more packets impossible. Fix this by freeing the skb in the error path if we are currently dealing with the first frag, i.e., an skb allocated in this iteration of xsk_build_skb.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix file-backed mounts over FUSE syzbot reported a null-ptr-deref in fuse_read_args_fill: fuse_read_folio+0xb0/0x100 fs/fuse/file.c:905 filemap_read_folio+0xc6/0x2a0 mm/filemap.c:2367 do_read_cache_folio+0x263/0x5c0 mm/filemap.c:3825 read_mapping_folio include/linux/pagemap.h:1011 [inline] erofs_bread+0x34d/0x7e0 fs/erofs/data.c:41 erofs_read_superblock fs/erofs/super.c:281 [inline] erofs_fc_fill_super+0x2b9/0x2500 fs/erofs/super.c:625 Unlike most filesystems, some network filesystems and FUSE need unavoidable valid `file` pointers for their read I/Os [1]. Anyway, those use cases need to be supported too. [1] https://docs.kernel.org/filesystems/vfs.html