In the Linux kernel, the following vulnerability has been resolved: mm: use aligned address in clear_gigantic_page() In current kernel, hugetlb_no_page() calls folio_zero_user() with the fault address. Where the fault address may be not aligned with the huge page size. Then, folio_zero_user() may call clear_gigantic_page() with the address, while clear_gigantic_page() requires the address to be huge page size aligned. So, this may cause memory corruption or information leak, addtional, use more obvious naming 'addr_hint' instead of 'addr' for clear_gigantic_page().

Incorrect object recycling and reuse vulnerability in Apache Tomcat. This issue affects Apache Tomcat: 11.0.0, 10.1.31, 9.0.96. Users are recommended to upgrade to version 11.0.1, 10.1.32 or 9.0.97, which fixes the issue.

Incorrect object re-cycling and re-use vulnerability in Apache Tomcat. Incorrect recycling of the request and response used by HTTP/2 requests could lead to request and/or response mix-up between users. This issue affects Apache Tomcat: from 11.0.0-M23 through 11.0.0-M26, from 10.1.27 through 10.1.30, from 9.0.92 through 9.0.95. Users are recommended to upgrade to version 11.0.0, 10.1.31 or 9.0.96, which fixes the issue.

Unchecked Error Condition vulnerability in Apache Tomcat. If Tomcat is configured to use a custom Jakarta Authentication (formerly JASPIC) ServerAuthContext component which may throw an exception during the authentication process without explicitly setting an HTTP status to indicate failure, the authentication may not fail, allowing the user to bypass the authentication process. There are no known Jakarta Authentication components that behave in this way. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M26, from 10.1.0-M1 through 10.1.30, from 9.0.0-M1 through 9.0.95. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other EOL versions may also be affected. Users are recommended to upgrade to version 11.0.0, 10.1.31 or 9.0.96, which fix the issue.

aiohttp is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.10.11, the Python parser parses newlines in chunk extensions incorrectly which can lead to request smuggling vulnerabilities under certain conditions. If a pure Python version of aiohttp is installed (i.e. without the usual C extensions) or `AIOHTTP_NO_EXTENSIONS` is enabled, then an attacker may be able to execute a request smuggling attack to bypass certain firewalls or proxy protections. Version 3.10.11 fixes the issue.

aiohttp is an asynchronous HTTP client/server framework for asyncio and Python. In versions starting with 3.10.6 and prior to 3.10.11, a memory leak can occur when a request produces a MatchInfoError. This was caused by adding an entry to a cache on each request, due to the building of each MatchInfoError producing a unique cache entry. An attacker may be able to exhaust the memory resources of a server by sending a substantial number (100,000s to millions) of such requests. Those who use any middlewares with aiohttp.web should upgrade to version 3.10.11 to receive a patch.

A sensitive data leakage vulnerability was identified in scikit-learn's TfidfVectorizer, specifically in versions up to and including 1.4.1.post1, which was fixed in version 1.5.0. The vulnerability arises from the unexpected storage of all tokens present in the training data within the `stop_words_` attribute, rather than only storing the subset of tokens required for the TF-IDF technique to function. This behavior leads to the potential leakage of sensitive information, as the `stop_words_` attribute could contain tokens that were meant to be discarded and not stored, such as passwords or keys. The impact of this vulnerability varies based on the nature of the data being processed by the vectorizer.

The ObjectSerializationDecoder in Apache MINA uses Java’s native deserialization protocol to process incoming serialized data but lacks the necessary security checks and defenses. This vulnerability allows attackers to exploit the deserialization process by sending specially crafted malicious serialized data, potentially leading to remote code execution (RCE) attacks. This issue affects MINA core versions 2.0.X, 2.1.X and 2.2.X, and will be fixed by the releases 2.0.27, 2.1.10 and 2.2.4. It's also important to note that an application using MINA core library will only be affected if the IoBuffer#getObject() method is called, and this specific method is potentially called when adding a ProtocolCodecFilter instance using the ObjectSerializationCodecFactory class in the filter chain. If your application is specifically using those classes, you have to upgrade to the latest version of MINA core library. Upgrading will  not be enough: you also need to explicitly allow the classes the ...

launch-editor allows users to open files with line numbers in editor from Node.js. Prior to version 2.9.0, due to the insufficient sanitization of the `file` argument in the `launchEditor`, an attacker can execute arbitrary commands on Windows by supplying a filename that contains special characters. This issue has been fixed in the `launch-editor` version 2.9.0, corresponding to vite version 5.4.9.

HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. XSLT parsing performed by various components are vulnerable to XML external entity injections. A processed XML file with a malicious DTD tag ( <!DOCTYPE foo [<!ENTITY example SYSTEM "/etc/passwd"> ]> could produce XML containing data from the host system. This impacts use cases where org.hl7.fhir.core is being used to within a host where external clients can submit XML. This is related to GHSA-6cr6-ph3p-f5rf, in which its fix (#1571 & #1717) was incomplete. This issue has been addressed in release version 6.4.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. Git defines a line-based protocol that is used to exchange information between Git and Git credential helpers. Some ecosystems (most notably, .NET and node.js) interpret single Carriage Return characters as newlines, which renders the protections against CVE-2020-5260 incomplete for credential helpers that treat Carriage Returns in this way. This issue has been addressed in commit `b01b9b8` which is included in release versions v2.48.1, v2.47.2, v2.46.3, v2.45.3, v2.44.3, v2.43.6, v2.42.4, v2.41.3, and v2.40.4. Users are advised to upgrade. Users unable to upgrade should avoid cloning from untrusted URLs, especially recursive clones.

Git is a source code management tool. When cloning from a server (or fetching, or pushing), informational or error messages are transported from the remote Git process to the client via the so-called "sideband channel". These messages will be prefixed with "remote:" and printed directly to the standard error output. Typically, this standard error output is connected to a terminal that understands ANSI escape sequences, which Git did not protect against. Most modern terminals support control sequences that can be used by a malicious actor to hide and misrepresent information, or to mislead the user into executing untrusted scripts. As requested on the git-security mailing list, the patches are under discussion on the public mailing list. Users are advised to update as soon as possible. Users unable to upgrade should avoid recursive clones unless they are from trusted sources.

RabbitMQ is a feature rich, multi-protocol messaging and streaming broker. In affected versions queue deletion via the HTTP API was not verifying the `configure` permission of the user. Users who had all of the following: 1. Valid credentials, 2. Some permissions for the target virtual host & 3. HTTP API access. could delete queues it had no (deletion) permissions for. This issue has been addressed in version 3.12.11 of the open source rabbitMQ release and in versions 1.5.2, 3.13.0, and 4.0.0 of the tanzu release. Users are advised to upgrade. Users unable to upgrade may disable management plugin and use, for example, Prometheus and Grafana for monitoring.

There exists interger overflows in libvpx in versions prior to 1.14.1. Calling vpx_img_alloc() with a large value of the d_w, d_h, or align parameter may result in integer overflows in the calculations of buffer sizes and offsets and some fields of the returned vpx_image_t struct may be invalid. Calling vpx_img_wrap() with a large value of the d_w, d_h, or stride_align parameter may result in integer overflows in the calculations of buffer sizes and offsets and some fields of the returned vpx_image_t struct may be invalid. We recommend upgrading to version 1.14.1 or beyond

qBittorrent before 5.0.1 proceeds with use of https URLs even after certificate validation errors.

Gitsign is a keyless Sigstore to signing tool for Git commits with your a GitHub / OIDC identity. gitsign may select the wrong Rekor entry to use during online verification when multiple entries are returned by the log. gitsign uses Rekor's search API to fetch entries that apply to a signature being verified. The parameters used for the search are the public key and the payload. The search API returns entries that match either condition rather than both. When gitsign's credential cache is used, there can be multiple entries that use the same ephemeral keypair / signing certificate. As gitsign assumes both conditions are matched by Rekor, there is no additional validation that the entry's hash matches the payload being verified, meaning that the wrong entry can be used to successfully pass verification. Impact is minimal as while gitsign does not match the payload against the entry, it does ensure that the certificate matches. This would need to be exploited during the certificate va...

Wasmtime is a fast and secure runtime for WebAssembly. Wasmtime's filesystem sandbox implementation on Windows blocks access to special device filenames such as "COM1", "COM2", "LPT0", "LPT1", and so on, however it did not block access to the special device filenames which use superscript digits, such as "COM¹", "COM²", "LPT⁰", "LPT¹", and so on. Untrusted Wasm programs that are given access to any filesystem directory could bypass the sandbox and access devices through those special device filenames with superscript digits, and through them gain access peripheral devices connected to the computer, or network resources mapped to those devices. This can include modems, printers, network printers, and any other device connected to a serial or parallel port, including emulated USB serial ports. Patch releases for Wasmtime have been issued as 24.0.2, 25.0.3, and 26.0.1. Users of Wasmtime 23.0.x and prior are recommended to upgrade to one of these patched versions. There are no know...

golang-jwt is a Go implementation of JSON Web Tokens. Unclear documentation of the error behavior in `ParseWithClaims` can lead to situation where users are potentially not checking errors in the way they should be. Especially, if a token is both expired and invalid, the errors returned by `ParseWithClaims` return both error codes. If users only check for the `jwt.ErrTokenExpired ` using `error.Is`, they will ignore the embedded `jwt.ErrTokenSignatureInvalid` and thus potentially accept invalid tokens. A fix has been back-ported with the error handling logic from the `v5` branch to the `v4` branch. In this logic, the `ParseWithClaims` function will immediately return in "dangerous" situations (e.g., an invalid signature), limiting the combined errors only to situations where the signature is valid, but further validation failed (e.g., if the signature is valid, but is expired AND has the wrong audience). This fix is part of the 4.5.1 release. We are aware that this changes the behav...

Redis is an open source, in-memory database that persists on disk. An authenticated with sufficient privileges may create a malformed ACL selector which, when accessed, triggers a server panic and subsequent denial of service. The problem is fixed in Redis 7.2.7 and 7.4.2.

In the Linux kernel, the following vulnerability has been resolved: mm: use aligned address in copy_user_gigantic_page() In current kernel, hugetlb_wp() calls copy_user_large_folio() with the fault address. Where the fault address may be not aligned with the huge page size. Then, copy_user_large_folio() may call copy_user_gigantic_page() with the address, while copy_user_gigantic_page() requires the address to be huge page size aligned. So, this may cause memory corruption or information leak, addtional, use more obvious naming 'addr_hint' instead of 'addr' for copy_user_gigantic_page().