In the Linux kernel, the following vulnerability has been resolved: bluetooth/hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX Syzbot hit warning in hci_conn_del() caused by freeing handle that was not allocated using ida allocator. This is caused by handle bigger than HCI_CONN_HANDLE_MAX passed by hci_le_big_sync_established_evt(), which makes code think it's unset connection. Add same check for handle upper bound as in hci_conn_set_handle() to prevent warning.

In the Linux kernel, the following vulnerability has been resolved: mm: avoid overflows in dirty throttling logic The dirty throttling logic is interspersed with assumptions that dirty limits in PAGE_SIZE units fit into 32-bit (so that various multiplications fit into 64-bits). If limits end up being larger, we will hit overflows, possible divisions by 0 etc. Fix these problems by never allowing so large dirty limits as they have dubious practical value anyway. For dirty_bytes / dirty_background_bytes interfaces we can just refuse to set so large limits. For dirty_ratio / dirty_background_ratio it isn't so simple as the dirty limit is computed from the amount of available memory which can change due to memory hotplug etc. So when converting dirty limits from ratios to numbers of pages, we just don't allow the result to exceed UINT_MAX. This is root-only triggerable problem which occurs when the operator sets dirty limits to >16 TB.

No description is available for this CVE.

In the Linux kernel, the following vulnerability has been resolved: leds: mlxreg: Use devm_mutex_init() for mutex initialization In this driver LEDs are registered using devm_led_classdev_register() so they are automatically unregistered after module's remove() is done. led_classdev_unregister() calls module's led_set_brightness() to turn off the LEDs and that callback uses mutex which was destroyed already in module's remove() so use devm API instead.

In the Linux kernel, the following vulnerability has been resolved: leds: an30259a: Use devm_mutex_init() for mutex initialization In this driver LEDs are registered using devm_led_classdev_register() so they are automatically unregistered after module's remove() is done. led_classdev_unregister() calls module's led_set_brightness() to turn off the LEDs and that callback uses mutex which was destroyed already in module's remove() so use devm API instead.

In the Linux kernel, the following vulnerability has been resolved: drm/lima: fix shared irq handling on driver remove lima uses a shared interrupt, so the interrupt handlers must be prepared to be called at any time. At driver removal time, the clocks are disabled early and the interrupts stay registered until the very end of the remove process due to the devm usage. This is potentially a bug as the interrupts access device registers which assumes clocks are enabled. A crash can be triggered by removing the driver in a kernel with CONFIG_DEBUG_SHIRQ enabled. This patch frees the interrupts at each lima device finishing callback so that the handlers are already unregistered by the time we fully disable clocks.

In the Linux kernel, the following vulnerability has been resolved: powerpc: Avoid nmi_enter/nmi_exit in real mode interrupt. nmi_enter()/nmi_exit() touches per cpu variables which can lead to kernel crash when invoked during real mode interrupt handling (e.g. early HMI/MCE interrupt handler) if percpu allocation comes from vmalloc area. Early HMI/MCE handlers are called through DEFINE_INTERRUPT_HANDLER_NMI() wrapper which invokes nmi_enter/nmi_exit calls. We don't see any issue when percpu allocation is from the embedded first chunk. However with CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK enabled there are chances where percpu allocation can come from the vmalloc area. With kernel command line "percpu_alloc=page" we can force percpu allocation to come from vmalloc area and can see kernel crash in machine_check_early: [ 1.215714] NIP [c000000000e49eb4] rcu_nmi_enter+0x24/0x110 [ 1.215717] LR [c0000000000461a0] machine_check_early+0xf0/0x2c0 [ 1.215719] --- interrupt: 200 [ 1.2...

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fw: scan offload prohibit all 6 GHz channel if no 6 GHz sband We have some policy via BIOS to block uses of 6 GHz. In this case, 6 GHz sband will be NULL even if it is WiFi 7 chip. So, add NULL handling here to avoid crash.

In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Make qedf_execute_tmf() non-preemptible Stop calling smp_processor_id() from preemptible code in qedf_execute_tmf90. This results in BUG_ON() when running an RT kernel. [ 659.343280] BUG: using smp_processor_id() in preemptible [00000000] code: sg_reset/3646 [ 659.343282] caller is qedf_execute_tmf+0x8b/0x360 [qedf]

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix double free err_addr pointer warnings In amdgpu_umc_bad_page_polling_timeout, the amdgpu_umc_handle_bad_pages will be run many times so that double free err_addr in some special case. So set the err_addr to NULL to avoid the warnings.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL pointer check for kzalloc [Why & How] Check return pointer of kzalloc before using it.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check index msg_id before read or write [WHAT] msg_id is used as an array index and it cannot be a negative value, and therefore cannot be equal to MOD_HDCP_MESSAGE_ID_INVALID (-1). [HOW] Check whether msg_id is valid before reading and setting. This fixes 4 OVERRUN issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check pipe offset before setting vblank pipe_ctx has a size of MAX_PIPES so checking its index before accessing the array. This fixes an OVERRUN issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip finding free audio for unknown engine_id [WHY] ENGINE_ID_UNKNOWN = -1 and can not be used as an array index. Plus, it also means it is uninitialized and does not need free audio. [HOW] Skip and return NULL. This fixes 2 OVERRUN issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Do not return negative stream id for array [WHY] resource_stream_to_stream_idx returns an array index and it return -1 when not found; however, -1 is not a valid array index number. [HOW] When this happens, call ASSERT(), and return a zero instead. This fixes an OVERRUN and an NEGATIVE_RETURNS issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: ASSERT when failing to find index by plane/stream id [WHY] find_disp_cfg_idx_by_plane_id and find_disp_cfg_idx_by_stream_id returns an array index and they return -1 when not found; however, -1 is not a valid index number. [HOW] When this happens, call ASSERT(), and return a positive number (which is fewer than callers' array size) instead. This fixes 4 OVERRUN and 2 NEGATIVE_RETURNS issues reported by Coverity.

[REJECTED CVE]

In the Linux kernel, the following vulnerability has been resolved: jffs2: Fix potential illegal address access in jffs2_free_inode During the stress testing of the jffs2 file system,the following abnormal printouts were found: [ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948 [ 2430.649622] Mem abort info: [ 2430.649829] ESR = 0x96000004 [ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits [ 2430.650564] SET = 0, FnV = 0 [ 2430.650795] EA = 0, S1PTW = 0 [ 2430.651032] FSC = 0x04: level 0 translation fault [ 2430.651446] Data abort info: [ 2430.651683] ISV = 0, ISS = 0x00000004 [ 2430.652001] CM = 0, WnR = 0 [ 2430.652558] [0069696969696948] address between user and kernel address ranges [ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 #33 [ 2430.655008] Hardware name: linux,dummy-virt (DT) [ 2430.655517] pstate: 20000005 (nzCv daif -P...

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: restrict NL80211_ATTR_TXQ_QUANTUM values syzbot is able to trigger softlockups, setting NL80211_ATTR_TXQ_QUANTUM to 2^31. We had a similar issue in sch_fq, fixed with commit d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM") watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:0:24] Modules linked in: irq event stamp: 131135 hardirqs last enabled at (131134): [<ffff80008ae8778c>] __exit_to_kernel_mode arch/arm64/kernel/entry-common.c:85 [inline] hardirqs last enabled at (131134): [<ffff80008ae8778c>] exit_to_kernel_mode+0xdc/0x10c arch/arm64/kernel/entry-common.c:95 hardirqs last disabled at (131135): [<ffff80008ae85378>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (131135): [<ffff80008ae85378>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (125892): [<ffff80008907e82c>] neigh_hh_init net/core/nei...

In the Linux kernel, the following vulnerability has been resolved: net: txgbe: initialize num_q_vectors for MSI/INTx interrupts When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized. Thus there will be kernel panic in wx_alloc_q_vectors() to allocate queue vectors.