In the Linux kernel, the following vulnerability has been resolved: mac802154: fix llsec key resources release in mac802154_llsec_key_del mac802154_llsec_key_del() can free resources of a key directly without following the RCU rules for waiting before the end of a grace period. This may lead to use-after-free in case llsec_lookup_key() is traversing the list of keys in parallel with a key deletion: refcount_t: addition on 0; use-after-free. WARNING: CPU: 4 PID: 16000 at lib/refcount.c:25 refcount_warn_saturate+0x162/0x2a0 Modules linked in: CPU: 4 PID: 16000 Comm: wpan-ping Not tainted 6.7.0 #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:refcount_warn_saturate+0x162/0x2a0 Call Trace: <TASK> llsec_lookup_key.isra.0+0x890/0x9e0 mac802154_llsec_encrypt+0x30c/0x9c0 ieee802154_subif_start_xmit+0x24/0x1e0 dev_hard_start_xmit+0x13e/0x690 sch_direct_xmit+0x2ae/0xbc0 __dev_queue_xmit+0x11dd/0x3c20 dgram_sendmsg+0x90b/0xd60 __sys_se...

In the Linux kernel, the following vulnerability has been resolved: mm: swap: fix race between free_swap_and_cache() and swapoff() There was previously a theoretical window where swapoff() could run and teardown a swap_info_struct while a call to free_swap_and_cache() was running in another thread. This could cause, amongst other bad possibilities, swap_page_trans_huge_swapped() (called by free_swap_and_cache()) to access the freed memory for swap_map. This is a theoretical problem and I haven't been able to provoke it from a test case. But there has been agreement based on code review that this is possible (see link below). Fix it by using get_swap_device()/put_swap_device(), which will stall swapoff(). There was an extra check in _swap_info_get() to confirm that the swap entry was not free. This isn't present in get_swap_device() because it doesn't make sense in general due to the race between getting the reference and swapoff. So I've added an equivalent check directly in fr...

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix btnxpuart_close Fix scheduling while atomic BUG in btnxpuart_close(), properly purge the transmit queue and free the receive skb. [ 10.973809] BUG: scheduling while atomic: kworker/u9:0/80/0x00000002 ... [ 10.980740] CPU: 3 PID: 80 Comm: kworker/u9:0 Not tainted 6.8.0-rc7-0.0.0-devel-00005-g61fdfceacf09 #1 [ 10.980751] Hardware name: Toradex Verdin AM62 WB on Dahlia Board (DT) [ 10.980760] Workqueue: hci0 hci_power_off [bluetooth] [ 10.981169] Call trace: ... [ 10.981363] uart_update_mctrl+0x58/0x78 [ 10.981373] uart_dtr_rts+0x104/0x114 [ 10.981381] tty_port_shutdown+0xd4/0xdc [ 10.981396] tty_port_close+0x40/0xbc [ 10.981407] uart_close+0x34/0x9c [ 10.981414] ttyport_close+0x50/0x94 [ 10.981430] serdev_device_close+0x40/0x50 [ 10.981442] btnxpuart_close+0x24/0x98 [btnxpuart] [ 10.981469] hci_dev_close_sync+0x2d8/0x718 [bluetooth] [ 10.981728] hci_dev...

In the Linux kernel, the following vulnerability has been resolved: nfs: fix UAF in direct writes In production we have been hitting the following warning consistently ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 17 PID: 1800359 at lib/refcount.c:28 refcount_warn_saturate+0x9c/0xe0 Workqueue: nfsiod nfs_direct_write_schedule_work [nfs] RIP: 0010:refcount_warn_saturate+0x9c/0xe0 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x9f/0x130 ? refcount_warn_saturate+0x9c/0xe0 ? report_bug+0xcc/0x150 ? handle_bug+0x3d/0x70 ? exc_invalid_op+0x16/0x40 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0x9c/0xe0 nfs_direct_write_schedule_work+0x237/0x250 [nfs] process_one_work+0x12f/0x4a0 worker_thread+0x14e/0x3b0 ? ZSTD_getCParams_internal+0x220/0x220 kthread+0xdc/0x120 ? __btf_name_valid+0xa0/0xa0 ret_from_fork+0x1f/0x30 This is because we're completing the nfs_direct_request twice in a row. The source of this is when we have our commit requests ...

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: fix reference counting on zcrypt card objects Tests with hot-plugging crytpo cards on KVM guests with debug kernel build revealed an use after free for the load field of the struct zcrypt_card. The reason was an incorrect reference handling of the zcrypt card object which could lead to a free of the zcrypt card object while it was still in use. This is an example of the slab message: kernel: 0x00000000885a7512-0x00000000885a7513 @offset=1298. First byte 0x68 instead of 0x6b kernel: Allocated in zcrypt_card_alloc+0x36/0x70 [zcrypt] age=18046 cpu=3 pid=43 kernel: kmalloc_trace+0x3f2/0x470 kernel: zcrypt_card_alloc+0x36/0x70 [zcrypt] kernel: zcrypt_cex4_card_probe+0x26/0x380 [zcrypt_cex4] kernel: ap_device_probe+0x15c/0x290 kernel: really_probe+0xd2/0x468 kernel: driver_probe_device+0x40/0xf0 kernel: __device_attach_driver+0xc0/0x140 kernel: bus_for_each_drv+0x8c/0xd0 kernel: __device_attach+0x114...

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix failure to detect DAT corruption in btree and direct mappings Patch series "nilfs2: fix kernel bug at submit_bh_wbc()". This resolves a kernel BUG reported by syzbot. Since there are two flaws involved, I've made each one a separate patch. The first patch alone resolves the syzbot-reported bug, but I think both fixes should be sent to stable, so I've tagged them as such. This patch (of 2): Syzbot has reported a kernel bug in submit_bh_wbc() when writing file data to a nilfs2 file system whose metadata is corrupted. There are two flaws involved in this issue. The first flaw is that when nilfs_get_block() locates a data block using btree or direct mapping, if the disk address translation routine nilfs_dat_translate() fails with internal code -ENOENT due to DAT metadata corruption, it can be passed back to nilfs_get_block(). This causes nilfs_get_block() to misidentify an existing block as non-existent, c...

In the Linux kernel, the following vulnerability has been resolved: nilfs2: prevent kernel bug at submit_bh_wbc() Fix a bug where nilfs_get_block() returns a successful status when searching and inserting the specified block both fail inconsistently. If this inconsistent behavior is not due to a previously fixed bug, then an unexpected race is occurring, so return a temporary error -EAGAIN instead. This prevents callers such as __block_write_begin_int() from requesting a read into a buffer that is not mapped, which would cause the BUG_ON check for the BH_Mapped flag in submit_bh_wbc() to fail.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16() If ->NameOffset of smb2_create_req is smaller than Buffer offset of smb2_create_req, slab-out-of-bounds read can happen from smb2_open. This patch set the minimum value of the name offset to the buffer offset to validate name length of smb2_create_req().

In the Linux kernel, the following vulnerability has been resolved: net: esp: fix bad handling of pages from page_pool When the skb is reorganized during esp_output (!esp->inline), the pages coming from the original skb fragments are supposed to be released back to the system through put_page. But if the skb fragment pages are originating from a page_pool, calling put_page on them will trigger a page_pool leak which will eventually result in a crash. This leak can be easily observed when using CONFIG_DEBUG_VM and doing ipsec + gre (non offloaded) forwarding: BUG: Bad page state in process ksoftirqd/16 pfn:1451b6 page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6 flags: 0x200000000000000(node=0|zone=2) page_type: 0xffffffff() raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000 raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000 page dumped because: page_pool leak Modules linked in: ip_gre gre ...

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix potencial out-of-bounds when buffer offset is invalid I found potencial out-of-bounds when buffer offset fields of a few requests is invalid. This patch set the minimum value of buffer offset field to ->Buffer offset to validate buffer length.

In the Linux kernel, the following vulnerability has been resolved: wireguard: netlink: check for dangling peer via is_dead instead of empty list If all peers are removed via wg_peer_remove_all(), rather than setting peer_list to empty, the peer is added to a temporary list with a head on the stack of wg_peer_remove_all(). If a netlink dump is resumed and the cursored peer is one that has been removed via wg_peer_remove_all(), it will iterate from that peer and then attempt to dump freed peers. Fix this by instead checking peer->is_dead, which was explictly created for this purpose. Also move up the device_update_lock lockdep assertion, since reading is_dead relies on that. It can be reproduced by a small script like: echo "Setting config..." ip link add dev wg0 type wireguard wg setconf wg0 /big-config ( while true; do echo "Showing config..." wg showconf wg0 > /dev/null done ) & sleep 4 wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n") Resulting in: BUG: KASAN: slab-use-...

In the Linux kernel, the following vulnerability has been resolved: wireguard: netlink: access device through ctx instead of peer The previous commit fixed a bug that led to a NULL peer->device being dereferenced. It's actually easier and faster performance-wise to instead get the device from ctx->wg. This semantically makes more sense too, since ctx->wg->peer_allowedips.seq is compared with ctx->allowedips_seq, basing them both in ctx. This also acts as a defence in depth provision against freed peers.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix NULL pointer dereference when get power limit Because powerplay_table initialization is skipped under sriov case, We check and set default lower and upper OD value if powerplay_table is NULL.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add a dc_state NULL check in dc_state_release [How] Check wheather state is NULL before releasing it.

In the Linux kernel, the following vulnerability has been resolved: ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses Since commit a4d5613c4dc6 ("arm: extend pfn_valid to take into account freed memory map alignment") changes the semantics of pfn_valid() to check presence of the memory map for a PFN. A valid page for an address which is reserved but not mapped by the kernel[1], the system crashed during some uio test with the following memory layout: node 0: [mem 0x00000000c0a00000-0x00000000cc8fffff] node 0: [mem 0x00000000d0000000-0x00000000da1fffff] the uio layout is：0xc0900000, 0x100000 the crash backtrace like: Unable to handle kernel paging request at virtual address bff00000 [...] CPU: 1 PID: 465 Comm: startapp.bin Tainted: G O 5.10.0 #1 Hardware name: Generic DT based system PC is at b15_flush_kern_dcache_area+0x24/0x3c LR is at __sync_icache_dcache+0x6c/0x98 [...] (b15_flush_kern_dcache_area) from (__sync_icache_dcache+0x6c/0x9...

In the Linux kernel, the following vulnerability has been resolved: kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address Read from an unsafe address with copy_from_kernel_nofault() in arch_adjust_kprobe_addr() because this function is used before checking the address is in text or not. Syzcaller bot found a bug and reported the case if user specifies inaccessible data area, arch_adjust_kprobe_addr() will cause a kernel panic. [ mingo: Clarified the comment. ]

In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix nr_cpus < nr_iaa case If nr_cpus < nr_iaa, the calculated cpus_per_iaa will be 0, which causes a divide-by-0 in rebalance_wq_table(). Make sure cpus_per_iaa is 1 in that case, and also in the nr_iaa == 0 case, even though cpus_per_iaa is never used if nr_iaa == 0, for paranoia.

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free in do_zone_finish() Shinichiro reported the following use-after-free triggered by the device replace operation in fstests btrfs/070. BTRFS info (device nullb1): scrub: finished on devid 1 with status: 0 ================================================================== BUG: KASAN: slab-use-after-free in do_zone_finish+0x91a/0xb90 [btrfs] Read of size 8 at addr ffff8881543c8060 by task btrfs-cleaner/3494007 CPU: 0 PID: 3494007 Comm: btrfs-cleaner Tainted: G W 6.8.0-rc5-kts #1 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Call Trace: <TASK> dump_stack_lvl+0x5b/0x90 print_report+0xcf/0x670 ? __virt_addr_valid+0x200/0x3e0 kasan_report+0xd8/0x110 ? do_zone_finish+0x91a/0xb90 [btrfs] ? do_zone_finish+0x91a/0xb90 [btrfs] do_zone_finish+0x91a/0xb90 [btrfs] btrfs_delete_unused_bgs+0x5e1/0x1750 [btrfs] ? __pfx_btrfs_delete_unused_bgs+0x10/0x10 [btrfs] ? ...

In the Linux kernel, the following vulnerability has been resolved: nouveau/dmem: handle kcalloc() allocation failure The kcalloc() in nouveau_dmem_evict_chunk() will return null if the physical memory has run out. As a result, if we dereference src_pfns, dst_pfns or dma_addrs, the null pointer dereference bugs will happen. Moreover, the GPU is going away. If the kcalloc() fails, we could not evict all pages mapping a chunk. So this patch adds a __GFP_NOFAIL flag in kcalloc(). Finally, as there is no need to have physically contiguous memory, this patch switches kcalloc() to kvcalloc() in order to avoid failing allocations.

In the Linux kernel, the following vulnerability has been resolved: net: phy: qcom: at803x: fix kernel panic with at8031_probe On reworking and splitting the at803x driver, in splitting function of at803x PHYs it was added a NULL dereference bug where priv is referenced before it's actually allocated and then is tried to write to for the is_1000basex and is_fiber variables in the case of at8031, writing on the wrong address. Fix this by correctly setting priv local variable only after at803x_probe is called and actually allocates priv in the phydev struct.