An input validation vulnerability exists in the HTTP-WRITEOEM handler due to insufficient validation of user-supplied data before it is processed by internal flash-write handling logic. Successful exploitation may cause httpd process or device to crash, resulting in loss of access to the web interface and a denial-of-service condition.

In the Linux kernel, the following vulnerability has been resolved: rapidio: clear mport->net when rio_add_net() fails rio_alloc_net() stores the newly allocated rio_net in mport->net before rio_scan_alloc_net() registers the device. If rio_add_net() fails, rio_scan_alloc_net() drops the device reference with put_device(), which releases the rio_net through the device release callback. However, mport->net is left pointing at the freed object. A later mport unregister path can then dereference the dangling mport->net pointer and may try to free the same rio_net again. Clear mport->net in the rio_add_net() failure path, matching the cleanup done for the destID table allocation failure path.

In the Linux kernel, the following vulnerability has been resolved: fat: release buffer head after rebuilding parent fat_scan_logstart() leaves the matching directory entry's buffer head in sinfo.bh for the caller to release, just like fat_scan(). fat_rebuild_parent() uses the directory entry to rebuild the parent inode for the nostale_ro NFS export path, but does not release sinfo.bh after a successful scan. Release it once fat_build_inode() has consumed the directory entry data.

In the Linux kernel, the following vulnerability has been resolved: bpf: Invalidate RCU pointers after final spin unlock In a sleepable BPF program, a spin lock can provide the only RCU protection for a kptr. The final bpf_spin_unlock() ends that protection, but the verifier leaves the pointer valid. Another CPU can then free the object before the pointer is used. A capability-limited runtime PoC triggered a task_struct use-after-free in __bpf_get_task_stack(). Record whether the program is in an RCU-protected context before releasing the lock. Invalidate RCU-protected pointers only when the unlock leaves the final such context. This preserves valid pointers in non-sleepable programs and inside an explicit RCU read-side section.

In the Linux kernel, the following vulnerability has been resolved: drm/omap: dsi: Do not copy isr table To be able to unregister stuff from isrs, the corresponding table was copied. Nobody seems to unregister stuff that way, so it does not help. But there are stack-allocated objects passed to these isrs giving chances of UAF of these objects if irqs are unregistered while they are handled, so better do not copy that table.

In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Add lockdown checks to legacy I/O and memory handlers Currently, the legacy I/O and memory sysfs handlers do not check security_locked_down(LOCKDOWN_PCI_ACCESS), leaving the legacy_io and legacy_mem files unprotected when the kernel is locked down. Commit eb627e17727e ("PCI: Lock down BAR access when the kernel is locked down") added the check to pci_write_config(), pci_mmap_resource(), and pci_write_resource_io() to prevent userspace from programming DMA-capable hardware that could be used to modify kernel code, but did not cover the legacy handlers. As a result, root can still write arbitrary I/O ports and map the legacy I/O and memory spaces while the kernel is locked down, which is the same capability the lockdown is meant to remove. Add the same check to pci_write_legacy_io(), pci_mmap_legacy_mem(), and pci_mmap_legacy_io(). These generic handlers cover both architectures that define HAVE_PCI_LEGA

In the Linux kernel, the following vulnerability has been resolved: remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry() table->offset[i] is a u32 from firmware, but was stored into a signed int. A crafted offset like 0xFFFFFFF0 becomes -16, placing hdr 16 bytes before the table buffer. The subsequent avail check was bypassed because the negative int was promoted to a large size_t in the expression "table_sz - offset - sizeof(*hdr)", yielding a large positive avail and letting the out-of-bounds hdr->type read proceed undetected. Store the offset as u32 and validate it with unsigned comparisons before any pointer arithmetic.

In the Linux kernel, the following vulnerability has been resolved: bpf, cgroup: Fix invalid storage access after __cgroup_bpf_attach failed A potential invalid storage access issue can occur after replacing a cgroup bpf prog. This occurs in the following scenario: 1. prog1 with storage is attached to a cgroup in multi-attach mode. 2. prog1 is replaced with prog2 using BPF_F_REPLACE in multi-attach mode, but fails midway (e.g. in bpf_trampoline_link_cgroup_shim or update_effective_progs). 3. A new prog3 is attached to the cgroup in multi-attach mode. The reason is that __cgroup_bpf_attach overwrites pl->storage with the new storage prior to attachment completion. When attachment fails midway, the cleanup path calls bpf_cgroup_storages_free(new_storage) to free the newly allocated storage, but fails to restore pl->storage back to old_storage. Consequently, the still-active prog1 holds invalid or dangling storage pointers, leading to an invalid memory access when prog1 execute

In the Linux kernel, the following vulnerability has been resolved: bpf: Check load-acquire src ptr type before the load check_atomic_load() calls check_load_mem() before atomic_ptr_type_ok(). For a load-acquire that fetches into its own source register (dst_reg == src_reg), check_load_mem() overwrites src_reg's type with the type of the loaded value, so the subsequent atomic_ptr_type_ok() no longer sees the source pointer and fails to reject the disallowed types (ctx, pkt, flow_keys, sock). Since bpf_convert_ctx_accesses() does not rewrite atomic loads, the raw access to the underlying kernel object is left in place. The destination type is taken from the ctx access itself, so a load-acquire of the sk field of struct __sk_buff for example leaves the register typed as PTR_TO_SOCK_COMMON_OR_NULL, which type_is_sk_pointer() does not match either, while it actually holds unconverted struct sk_buff bytes. Once the NULL check has passed this is a type confusion, not just a leak of kernel

In the Linux kernel, the following vulnerability has been resolved: thermal: hwmon: Remove hwmon class device along with its parent The current code creates one hwmon device per thermal zone type and that device is registered under the first thermal zone of the given type. That turns out to be problematic when the thermal zone holding the hwmon device is removed. For example, say that there are two ACPI thermal zones on a system /sys/devices/virtual/thermal/thermal_zone0/ /sys/devices/virtual/thermal/thermal_zone1/ The current code registers a hwmon class device for thermal_zone0 only: /sys/devices/virtual/thermal/thermal_zone0/hwmon0/ because the type is "acpitz" for both of them, but it adds a sysfs attribute that belongs to thermal_zone1 under it: /sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp2_input There is also /sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp1_input which belongs to thermal_zone0. When thermal_zone0 is removed, say because the ACPI

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

A denial-of-service vulnerability exists in httpd service on Archer A6 v4 where the asynchronous systool instruction handlng path in httpd does not properly synchronize or safely manage concurrent systool operations.  By sending crafted systool instructions through the asynchronous request path, successful exploitation may cause the httpd process or device management service to crash and may result in temporary loss of access to the web management interface or device reboot.

In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Hold CQ references when processing EQ events EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or error callbacks outside the xarray lock. erdma_destroy_cq() can erase the CQ from the xarray and free its queue buffer and doorbell record while a previously scheduled EQ handler is still using the CQ. Add a CQ refcount and take a reference under the xarray lock with refcount_inc_not_zero(). Remove the CQ from the xarray before dropping the destroy-path reference, then wait for in-flight EQ users before releasing CQ resources.

In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Hold QP references for AE and CM processing AE QP fatal events and iWARP CM paths load QPs from dev->qp_xa and then use or reference them outside the xarray lock. erdma_destroy_qp() can drop the destroy-path reference and free QP resources while such a lookup is in flight. Add erdma_qp_get_by_qpn() to acquire a kref under the xarray lock with kref_get_unless_zero(). Remove the QP from the xarray before dropping the destroy-path reference so no new lookup can acquire it while destruction waits for existing users.

In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ srp_recv_done() passes wc->byte_len to srp_process_rsp(). It passes nothing to srp_process_cred_req() and srp_process_aer_req(), which read fixed-size fields from the receive buffer without checking that those fields were received. The buffer size is max_ti_iu_len, which comes from the login response and is not validated. A target that advertises 8 and then sends an 8-byte SRP_CRED_REQ makes the initiator read req->tag from beyond the end of the buffer. req->tag is copied into the SRP_CRED_RSP and sent back, so those bytes reach the target. SRP_AER_REQ behaves the same way and also reads req->lun. The leak is 8 bytes per response. max_ti_iu_len also decides which slab cache the buffer comes from. With 8 the buffer is a kmalloc-8 object and the read is entirely outside it: BUG: KASAN: slab-out-of-bounds in srp_recv_done+0x172b/0x1aa0 Read of size 8

In the Linux kernel, the following vulnerability has been resolved: ARM: 9481/2: breakpoint: CFI breakpoints only on demand This removes the stub hw_breakpoint_cfi_handler() from ARM, making it not steal breakpoint type 0x03 (ARM_ENTRY_CFI_BREAKPOINT) unless CFI is actively used in the kernel. When not instrumenting with CFI, or when a breakpoint is issued in userspace, we fall through to return 1 from hw_breakpoint_pending() "unhandled fault" so userspace can make use of this breakpoint. Tested with LKDTM and this command line: echo CFI_FORWARD_PROTO > /sys/kernel/debug/provoke-crash/DIRECT still works as expected.

In the Linux kernel, the following vulnerability has been resolved: ARM: 9483/1: select HAVE_POSIX_CPU_TIMERS_TASK_WORK Commit c6e61c06d606 ("ARM: 9463/1: Allow to enable RT") enabled PREEMPT_RT on ARM but did not select HAVE_POSIX_CPU_TIMERS_TASK_WORK. This leaves CONFIG_POSIX_CPU_TIMERS_TASK_WORK disabled, so CPU timers expire in hard IRQ context. On PREEMPT_RT this makes run_posix_cpu_timers() take the sleeping sighand->siglock: BUG: sleeping function called from invalid context at spinlock_rt.c:48 rt_spin_lock from lock_task_sighand lock_task_sighand from run_posix_cpu_timers run_posix_cpu_timers from update_process_times ARM handles TIF_NOTIFY_RESUME on all return-to-user paths, including v7-M. ARM32 KVM host support was removed by commit 541ad0150ca4 ("arm: Remove 32bit KVM host support"), so the select need not be conditional on KVM. Select it to defer POSIX CPU timer expiry to task context. Reproduced with setrlimit(RLIMIT_CPU, ...) and a busy loop. The sam

In the Linux kernel, the following vulnerability has been resolved: ARM: 9484/1: enable interrupts when unhandled user faults are triggered PREEMPT_RT requires interrupts to be enabled when sending signals. When do_DataAbort()/do_PrefetchAbort() triggers unhandled user faults, that is `inf->fn()` return a non-zero value, and the interrupts are not enabled within the hook function, force_sig_fault() will be called with interrupts disabled. This can be triggered by user programs executing the bkpt instruction, with kernel config CONFIG_PERF_EVENTS=n. Enable interrupts in do_DataAbort()/do_PrefetchAbort() when unhandled user faults are triggered to fix the issue.

In the Linux kernel, the following vulnerability has been resolved: ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults When CONFIG_DEBUG_USER=y, and cmdline "user_debug=31" is set, a user fault may trigger show_pte() without any lock. If another thread in the same process concurrently calls munmap(), the page table pages may be freed while show_pte() is still traversing them, causing a use-after-free in show_pte(). If CONFIG_ARM_LPAE=y, this may cause a kernel panic if the pages table of PMD are freed when show_pte() is running. Acquire mmap_write_lock() around show_pte() for user faults to fix the contention. For user faults, additionally restrict that show_pte() is called only when the addr is a user-space address (addr < TASK_SIZE). This is because the lock of tsk->mm only protects the virtual memory of user address space, furthermore, dumping the page tables of a kernel-space address for user faults is unnecessary and may have security implications. Ke

In the Linux kernel, the following vulnerability has been resolved: ocfs2: synchronize heartbeat callbacks with o2net teardown Patch series "ocfs2: harden heartbeat teardown races". This series fixes two OCFS2 heartbeat/o2net teardown races found by KASAN. This patch (of 2): Heartbeat callbacks stay registered while configfs local-node teardown enters o2net_stop_listening(). A node-down event can still run through o2net_disconnect_node() and o2net_set_nn_state() while teardown is destroying o2net_wq, so the later queue/flush operations can hit a dead workqueue. KASAN has caught this as a slab-use-after-free in __queue_work() with the call chain: KASAN slab-use-after-free in __queue_work+0x56/0xa90 Read of size 4 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 __queue_work+0x56/0xa90 srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __queue_delayed_work+0x58/0x1e0 queue_delayed_work_on+0xb4/0xc0 o2net_set_nn