In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free of new block group that became unused If a task creates a new block group and that block group becomes unused before we finish its creation, at btrfs_create_pending_block_groups(), then when btrfs_mark_bg_unused() is called against the block group, we assume that the block group is currently in the list of block groups to reclaim, and we move it out of the list of new block groups and into the list of unused block groups. This has two consequences: 1) We move it out of the list of new block groups associated to the current transaction. So the block group creation is not finished and if we attempt to delete the bg because it's unused, we will not find the block group item in the extent tree (or the new block group tree), its device extent items in the device tree etc, resulting in the deletion to fail due to the missing items; 2) We don't increment the reference count on the block group when...

In the Linux kernel, the following vulnerability has been resolved: skbuff: Fix a race between coalescing and releasing SKBs Commit 1effe8ca4e34 ("skbuff: fix coalescing for page_pool fragment recycling") allowed coalescing to proceed with non page pool page and page pool page when @from is cloned, i.e. to->pp_recycle --> false from->pp_recycle --> true skb_cloned(from) --> true However, it actually requires skb_cloned(@from) to hold true until coalescing finishes in this situation. If the other cloned SKB is released while the merging is in process, from_shinfo->nr_frags will be set to 0 toward the end of the function, causing the increment of frag page _refcount to be unexpectedly skipped resulting in inconsistent reference counts. Later when SKB(@to) is released, it frees the page directly even though the page pool page is still in use, leading to use-after-free or double-free errors. So it should be prohibited. The double-free error message below prompted us to investigate:...

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: don't allow to overwrite ENDPOINT0 attributes A bad USB device is able to construct a service connection response message with target endpoint being ENDPOINT0 which is reserved for HTC_CTRL_RSVD_SVC and should not be modified to be used for any other services. Reject such service connection responses. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: arm64/sme: Set new vector length before reallocating As part of fixing the allocation of the buffer for SVE state when changing SME vector length we introduced an immediate reallocation of the SVE state, this is also done when changing the SVE vector length for consistency. Unfortunately this reallocation is done prior to writing the new vector length to the task struct, meaning the allocation is done with the old vector length and can lead to memory corruption due to an undersized buffer being used. Move the update of the vector length before the allocation to ensure that the new vector length is taken into account. For some reason this isn't triggering any problems when running tests on the arm64 fixes branch (even after repeated tries) but is triggering issues very often after merge into mainline.

A flaw was found in the Linux kernel's btrfs filesystem. A local user could exploit a race condition that occurs during the creation and relocation of quota trees. This race condition can lead to a system crash, resulting in a Denial of Service (DoS).

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Avoid undefined behavior: applying zero offset to null pointer ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:...

In the Linux kernel, the following vulnerability has been resolved: dma-buf/dma-resv: Stop leaking on krealloc() failure Currently dma_resv_get_fences() will leak the previously allocated array if the fence iteration got restarted and the krealloc_array() fails. Free the old array by hand, and make sure we still clear the returned *fences so the caller won't end up accessing freed memory. Some (but not all) of the callers of dma_resv_get_fences() seem to still trawl through the array even when dma_resv_get_fences() failed. And let's zero out *num_fences as well for good measure.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid NULL pointer access during management transmit cleanup Currently 'ar' reference is not added in skb_cb. Though this is generally not used during transmit completion callbacks, on interface removal the remaining idr cleanup callback uses the ar pointer from skb_cb from management txmgmt_idr. Hence fill them during transmit call for proper usage to avoid NULL pointer dereference. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can lead to the use of wrong `CIDR_POS(c)` for calculating array offsets, which can lead to integer underflow. As a result, it leads to slab out-of-bound access. This patch adds back the IP_SET_HASH_WITH_NET0 macro to ip_set_hash_netportnet to address the issue.

In the Linux kernel, the following vulnerability has been resolved: mm: fix zswap writeback race condition The zswap writeback mechanism can cause a race condition resulting in memory corruption, where a swapped out page gets swapped in with data that was written to a different page. The race unfolds like this: 1. a page with data A and swap offset X is stored in zswap 2. page A is removed off the LRU by zpool driver for writeback in zswap-shrink work, data for A is mapped by zpool driver 3. user space program faults and invalidates page entry A, offset X is considered free 4. kswapd stores page B at offset X in zswap (zswap could also be full, if so, page B would then be IOed to X, then skip step 5.) 5. entry A is replaced by B in tree->rbroot, this doesn't affect the local reference held by zswap-shrink work 6. zswap-shrink work writes back A at X, and frees zswap entry A 7. swapin of slot X brings A in memory instead of B The fix: Once the swap page cache has been allocated (case...

In the Linux kernel, the following vulnerability has been resolved: media: hi846: fix usage of pm_runtime_get_if_in_use() pm_runtime_get_if_in_use() does not only return nonzero values when the device is in use, it can return a negative errno too. And especially during resuming from system suspend, when runtime pm is not yet up again, -EAGAIN is being returned, so the subsequent pm_runtime_put() call results in a refcount underflow. Fix system-resume by handling -EAGAIN of pm_runtime_get_if_in_use().

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Reinit port->pm on port specific driver unbind When we unbind a serial port hardware specific 8250 driver, the generic serial8250 driver takes over the port. After that we see an oops about 10 seconds later. This can produce the following at least on some TI SoCs: Unhandled fault: imprecise external abort (0x1406) Internal error: : 1406 [#1] SMP ARM Turns out that we may still have the serial port hardware specific driver port->pm in use, and serial8250_pm() tries to call it after the port specific driver is gone: serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base] uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base] uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c __tty_hangup.part.0 from disassociate_ctty+0x154/0x20c disassociate_ctty from do_exit+0x744/0xaac do_exit from do_group_exit+0x40/0x8c do_group_exit from __wake_up_parent+0x0/0x1c Let's fix ...

In the Linux kernel, the following vulnerability has been resolved: PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the device yet), doing a VM hibernation triggers a panic in hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because pdev->dev.msi.data is still NULL. Avoid the panic by checking if MSI-X/MSI is enabled.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix possible memory leak if device_add() fails If device_add() returns error, the name allocated by dev_set_name() needs be freed. As the comment of device_add() says, put_device() should be used to decrease the reference count in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanp().

In the Linux kernel, the following vulnerability has been resolved: tty: pcn_uart: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: fsverity: reject FS_IOC_ENABLE_VERITY on mode 3 fds Commit 56124d6c87fd ("fsverity: support enabling with tree block size < PAGE_SIZE") changed FS_IOC_ENABLE_VERITY to use __kernel_read() to read the file's data, instead of direct pagecache accesses. An unintended consequence of this is that the 'WARN_ON_ONCE(!(file->f_mode & FMODE_READ))' in __kernel_read() became reachable by fuzz tests. This happens if FS_IOC_ENABLE_VERITY is called on a fd opened with access mode 3, which means "ioctl access only". Arguably, FS_IOC_ENABLE_VERITY should work on ioctl-only fds. But ioctl-only fds are a weird Linux extension that is rarely used and that few people even know about. (The documentation for FS_IOC_ENABLE_VERITY even specifically says it requires O_RDONLY.) It's probably not worthwhile to make the ioctl internally open a new fd just to handle this case. Thus, just reject the ioctl on such fds for now.

In the Linux kernel, the following vulnerability has been resolved: vfio/type1: prevent underflow of locked_vm via exec() When a vfio container is preserved across exec, the task does not change, but it gets a new mm with locked_vm=0, and loses the count from existing dma mappings. If the user later unmaps a dma mapping, locked_vm underflows to a large unsigned value, and a subsequent dma map request fails with ENOMEM in __account_locked_vm. To avoid underflow, grab and save the mm at the time a dma is mapped. Use that mm when adjusting locked_vm, rather than re-acquiring the saved task's mm, which may have changed. If the saved mm is dead, do nothing. locked_vm is incremented for existing mappings in a subsequent patch.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: Removed unneeded of_node_put in felix_parse_ports_node Remove unnecessary of_node_put from the continue path to prevent child node from being released twice, which could avoid resource leak or other unexpected issues.

In the Linux kernel, the following vulnerability has been resolved: x86/resctrl: Clear staged_config[] before and after it is used As a temporary storage, staged_config[] in rdt_domain should be cleared before and after it is used. The stale value in staged_config[] could cause an MSR access error. Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3 Cache (MBA should be disabled if the number of CLOSIDs for MB is less than 16.) : mount -t resctrl resctrl -o cdp /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..7} umount /sys/fs/resctrl/ mount -t resctrl resctrl /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..8} An error occurs when creating resource group named p8: unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60) Call Trace: <IRQ> __flush_smp_call_function_queue+0x11d/0x170 __sysvec_call_function+0x24/0xd0 sysvec_call_function+0x89/0xc0 </IRQ> <TASK> asm_sysvec_call_function+0x16/0x20 When creatin...

In the Linux kernel, the following vulnerability has been resolved: usb: ucsi_acpi: Increase the command completion timeout Commit 130a96d698d7 ("usb: typec: ucsi: acpi: Increase command completion timeout value") increased the timeout from 5 seconds to 60 seconds due to issues related to alternate mode discovery. After the alternate mode discovery switch to polled mode the timeout was reduced, but instead of being set back to 5 seconds it was reduced to 1 second. This is causing problems when using a Lenovo ThinkPad X1 yoga gen7 connected over Type-C to a LG 27UL850-W (charging DP over Type-C). When the monitor is already connected at boot the following error is logged: "PPM init failed (-110)", /sys/class/typec is empty and on unplugging the NULL pointer deref fixed earlier in this series happens. When the monitor is connected after boot the following error is logged instead: "GET_CONNECTOR_STATUS failed (-110)". Setting the timeout back to 5 seconds fixes both cases.