In the Linux kernel, the following vulnerability has been resolved: amt: re-read skb header pointers after every pull Several AMT receive and transmit paths cache a pointer into the skb head (ip_hdr(), ipv6_hdr(), eth_hdr() or the AMT message header) and then call a helper that can reallocate that head before the cached pointer is used again. pskb_may_pull(), ip_mc_may_pull(), ipv6_mc_may_pull(), iptunnel_pull_header(), ip_mc_check_igmp() and ipv6_mc_check_mld() can all free the old head and move the data, so a pointer taken before the call dangles afterwards and the later access is a use-after-free of the freed head. The affected sites are: amt_rcv() caches ip_hdr() before amt_parse_type() pulls, then reads iph->saddr. amt_dev_xmit() caches ip_hdr()/ipv6_hdr() before ip_mc_check_igmp()/ ipv6_mc_check_mld() and pskb_may_pull(), then reads the group address. amt_multicast_data_handler() caches eth_hdr() before pskb_may_pull(), then writes the L2 header. amt_membership_query_handler(...

In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix memory leak on slave unregistration by removing synced VLANs When an HSR master device is brought UP, it auto-adds VLAN 0 via vlan_vid0_add(), which propagates VID 0 to its slave devices (slave A and B). If a slave device is later unregistered while HSR is active (e.g., during netns cleanup or interface destruction), hsr_del_port() is called to detach the slave port from the HSR master. However, hsr_del_port() currently does not delete the VLAN IDs that were synced to the slave device by HSR. As a result, the slave device retains a refcount on VID 0 (and any other synced VLANs). When the slave device is destroyed, its vlan_info / vlan_vid_info structure remains allocated, leading to a memory leak. Fix this by calling vlan_vids_del_by_dev(port->dev, master->dev) in hsr_del_port() before unlinking slave A or slave B ports, matching the propagation logic in hsr_ndo_vlan_rx_add_vid() / hsr_ndo_vlan_rx_kill...

In the Linux kernel, the following vulnerability has been resolved: sctp: auth: verify auth requirement when auth_chunk is NULL sctp_auth_chunk_verify() returns true unconditionally when chunk->auth_chunk is NULL, silently skipping authentication. This is incorrect when: 1. skb_clone() failed in the BH receive path, leaving auth_chunk NULL. In sctp_endpoint_bh_rcv() asoc is NULL for new connections, so the early sctp_auth_recv_cid() check cannot catch this. 2. No AUTH chunk precedes COOKIE-ECHO, so skb_clone() is never called and auth_chunk remains NULL. Fix by checking sctp_auth_recv_cid() when auth_chunk is NULL: if authentication is required, return false to drop the chunk; otherwise continue normally.

In the Linux kernel, the following vulnerability has been resolved: vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the outer header, but for a Geneve-encapsulated packet the device can set them based on the inner header instead, signalled by the VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the function never skips the outer encapsulation, this mismatch triggers: - BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer protocol is UDP (Geneve), not TCP. - BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa). Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the function cannot locate the inner header it would need to parse. Also convert the remaining BUG_ON()s in this function to return 0 defensively.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Fix SVM leak on resv obj alloc failure in xe_vm_create() Commit 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm") made xe_svm_init() unconditional in xe_vm_create() and extended it to also initialize a "simple" gpusvm state for non-fault-mode VMs. The matching xe_svm_fini() call in xe_vm_close_and_put() was updated to run unconditionally, but the error unwind path in xe_vm_create() was not. On the drm_gpuvm_resv_object_alloc() failure path, xe_svm_init() has already succeeded but xe_svm_fini() is only called when XE_VM_FLAG_FAULT_MODE is set. For non-fault-mode VMs this leaves vm->svm.gpusvm partially initialized and leaks the resources allocated by drm_gpusvm_init(). For fault-mode VMs, xe_svm_init() additionally acquires the pagemap owner via drm_pagemap_acquire_owner() and the pagemaps via xe_svm_get_pagemaps(). Those resources are released by xe_svm_close(), not xe_svm_fini(). On the same er...

In the Linux kernel, the following vulnerability has been resolved: tipc: fix u16 MTU truncation in media and bearer MTU validation Both TIPC_NL_MEDIA_SET and TIPC_NL_BEARER_SET accept user-supplied MTU values but only enforce a minimum bound, not a maximum. When a user sets the MTU to a value exceeding U16_MAX (65535), it passes validation but is silently truncated when assigned to u16 fields l->mtu and l->advertised_mtu in tipc_link_create(). Values like 65536 (0x10000) truncate to 0, causing a division by zero in tipc_link_set_queue_limits() which computes TIPC_MAX_PUBL / (l->mtu / ITEM_SIZE). Other overflowing values (e.g. 65537-131071) produce small incorrect MTU values, resulting in link malfunction behaviors. Crash stack (triggered as unprivileged user via user namespace): tipc_link_set_queue_limits net/tipc/link.c:2531 tipc_link_create net/tipc/link.c:520 tipc_node_check_dest net/tipc/node.c:1279 tipc_disc_rcv net/tipc/discover.c:252 tipc_rcv...

In the Linux kernel, the following vulnerability has been resolved: net: gre: fix lltx regression for GRE tunnels with SEQ/CSUM Before commit 00d066a4d4ed ("netdev_features: convert NETIF_F_LLTX to dev->lltx"), NETIF_F_LLTX was set unconditionally in both __gre_tunnel_init() and ip6gre_tnl_init_features() alongside GRE_FEATURES: dev->features |= GRE_FEATURES | NETIF_F_LLTX; When that commit converted NETIF_F_LLTX to the dev->lltx flag, it placed 'dev->lltx = true' after the SEQ/CSUM early returns instead of before them. This causes GRE/GRETAP/ip6gre tunnels with SEQ or CSUM+encap to lose lockless TX, reintroducing _xmit_lock acquisition around their ndo_start_xmit. Since GRE xmit re-enters the stack via ip_tunnel_xmit(), holding _xmit_lock risks ABBA deadlock with the underlay device. CPU0 CPU1 ---- ---- lock(&qdisc_xmit_lock_key#6); lock(&qdisc_xmit_lock_key#3); lock(&qdisc_xmit_lock_key#6); lock(&qdisc_xmit_lock_key#3); Fix by moving d...

In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Zero-extend signed ALU32 div/mod results ALU32 operations write a 32-bit result and leave the upper 32 bits of the BPF register zero. The LoongArch JIT sign-extends the result of signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient or remainder leaves bits 63:32 set in JITted code while the verifier and interpreter model those bits as zero. Keep sign-extension on the operands, which signed divide needs, and zero-extend the ALU32 result after the divide or modulo instruction, matching the unsigned ALU32 div/mod paths and every other ALU32 operation in this JIT.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: restrict socket creation to the initial network namespace QRTR keeps its entire port and node state in module-global variables that are not partitioned per network namespace: qrtr_local_nid is a single global node id (always 1) and qrtr_ports is a single global xarray. qrtr_port_lookup() and qrtr_local_enqueue() operate on that global state with no network-namespace check, and qrtr_create() places no restriction on the namespace a socket is created in. As a result an unprivileged process that creates an AF_QIPCRTR socket in a separate network namespace, e.g. via unshare(CLONE_NEWUSER | CLONE_NEWNET), can send QRTR datagrams - including control-plane messages such as QRTR_TYPE_NEW_SERVER - to QRTR sockets owned by another namespace, and vice versa. The receiving socket sees such a message as coming from node id 1, indistinguishable from a legitimate local client, breaking the isolation that network namespa...

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix MCIA register buffer overflow on 32 dword reads The MCIA register can return up to 32 dwords (128 bytes) when the device advertises the mcia_32dwords capability, but struct mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just 12 dwords (48 bytes) of data. mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then memcpy()s that many bytes out of the register, potentially reading past the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this is caught as a buffer overflow while reading the module EEPROM via ethtool: detected buffer overflow in memcpy kernel BUG at lib/string_helpers.c:1048! RIP: 0010:fortify_panic+0x13/0x20 Call Trace: mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core] mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core] mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core] eeprom_prepare_data+0xf3/0x170 ethnl_default_doit+0xf1/0x3b0 Extend th...

In the Linux kernel, the following vulnerability has been resolved: ice: prevent tstamp ring allocation for non-PF VSI types The pf->txtime_txqs bitmap tracks which Tx queues have ETF (Earliest TxTime First) offload enabled. This bitmap is indexed by queue number and is set by ice_offload_txtime(), which only operates on PF VSI queues. However, ice_is_txtime_ena() does not check the VSI type before consulting the bitmap. When ETF offload is enabled on PF Tx queue 0, bit 0 is set in pf->txtime_txqs. During a subsequent PCI reset rebuild, the CTRL VSI's Tx queue 0 is reconfigured and ice_is_txtime_ena() is called for that ring. Since it only checks pf->txtime_txqs by queue index without distinguishing VSI type, it finds bit 0 set and returns true, matching the PF VSI's ETF queue, not the CTRL VSI's. This causes ice_vsi_cfg_txq() to spuriously allocate a tstamp_ring for the CTRL VSI ring. Since CTRL VSI rings have no associated netdev, ice_clean_tx_ring() takes an early return at the !...

In the Linux kernel, the following vulnerability has been resolved: idpf: fix max_vport related crash on allocation error during init Set adapter->max_vports only after successful allocation of vports, netdevs and vport_config buffers. This fixes possible crashes on reset or rmmod, following failed allocation on init [ 305.981402] idpf 0000:83:00.0: enabling device (0100 -> 0102) [ 305.994464] idpf 0000:83:00.0: Device HW Reset initiated [ 320.416872] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 320.416918] #PF: supervisor read access in kernel mode [ 320.416942] #PF: error_code(0x0000) - not-present page [ 320.416963] PGD 2099657067 P4D 0 [ 320.416983] Oops: Oops: 0000 [#1] SMP NOPTI ... [ 320.417093] RIP: 0010:idpf_remove+0x118/0x200 [idpf] [ 320.417130] Code: 8b bb 98 09 00 00 e8 17 0f 5b e5 48 8b bb e8 08 00 00 e8 0b 0f 5b e5 66 83 bb 28 06 00 00 00 48 8b bb 20 06 00 00 74 49 31 ed <48> 8b 04 ef 48 85 c0 74 2f 48 8b 78 20 e8 66 58 91 e5 48 8b 83 20...

In the Linux kernel, the following vulnerability has been resolved: rds: tcp: unregister sysctl before tearing down listen socket rds_tcp_exit_net() frees the per-netns RDS TCP listen socket via rds_tcp_kill_sock() before unregistering the per-netns sysctl table. Since rds_tcp_skbuf_handler() derives the netns from rtn->rds_tcp_listen_sock->sk, a concurrent sysctl write can race with netns teardown and dereference the freed socket/sk. KASAN reports the race as: BUG: KASAN: slab-use-after-free in rds_tcp_skbuf_handler+0x2aa/0x2e0 rds_tcp_skbuf_handler net/rds/tcp.c:721 proc_sys_call_handler fs/proc/proc_sysctl.c vfs_write fs/read_write.c __x64_sys_pwrite64 fs/read_write.c Fix this by unregistering the RDS TCP sysctl table before calling rds_tcp_kill_sock(). unregister_net_sysctl_table() prevents new sysctl handlers from starting and waits for in-flight handlers to finish, so the listen socket can then be released sa...

In the Linux kernel, the following vulnerability has been resolved: tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream() In tipc_recvmsg(), the copy length is computed as: copy = min_t(int, dlen - offset, buflen); buflen is size_t but min_t(int, ...) casts it to int. When buflen exceeds INT_MAX (e.g. 0xFFFFFFFF via io_uring provided buffers), it wraps negative, wins the comparison, and the negative copy length propagates to simple_copy_to_iter() where int-to-size_t promotion makes it SIZE_MAX, triggering a WARN_ON. tipc_recvstream() has the same pattern. Kernel panic - not syncing: kernel: panic_on_warn set ... RIP: 0010:simple_copy_to_iter+0x9e/0xd0 (net/core/datagram.c:521) Call Trace: __skb_datagram_iter+0x123/0x8b0 (net/core/datagram.c:402) skb_copy_datagram_iter+0x77/0x1a0 (net/core/datagram.c:534) tipc_recvmsg+0x3d7/0xe80 (net/tipc/socket.c:1934) io_recvmsg+0x47e/0xda0 Fix by changing min_t(int, ...) to min_t(size_t, ...) in both functions. The result is always <...

In the Linux kernel, the following vulnerability has been resolved: net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() open code the NET_DM_ATTR_PAYLOAD attribute to avoid zeroing the packet payload before overwriting it with skb_copy_bits(). skb_put() reserves nla_total_size(payload_len), i.e. the header plus the NLA_ALIGN() padding, but only payload_len bytes are copied in. When payload_len is not a multiple of 4 the 1-3 padding bytes are never initialized and are leaked to user space inside the netlink message. KMSAN confirms the leak for the software path when the packet payload length is not 4-byte aligned: BUG: KMSAN: kernel-infoleak in _copy_to_iter _copy_to_iter __skb_datagram_iter skb_copy_datagram_iter netlink_recvmsg sock_recvmsg __sys_recvfrom Uninit was created at: kmem_cache_alloc_node_noprof __alloc_skb net_dm_packet_work Bytes 173-175 of 176 are uninitialized Use __nla_reserve(), which sets up the at...

In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix size calculations for 64-bit attributes net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and NET_DM_ATTR_TIMESTAMP). On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for 64-bit alignment. However, net_dm_packet_report_size() and net_dm_hw_packet_report_size() used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)), budgeting 12 bytes instead of up to 16 bytes. This under-estimation of SKB size can lead to an skb_over_panic() when __nla_reserve() or skb_put() is subsequently called. Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations.

In the Linux kernel, the following vulnerability has been resolved: drop_monitor: perform u64_stats updates under IRQ-disabled section In net_dm_packet_trace_kfree_skb_hit() and net_dm_hw_trap_packet_probe(), u64_stats_update_begin() / u64_stats_inc() / u64_stats_update_end() were called after spin_unlock_irqrestore(&...drop_queue.lock, flags), when local IRQs had already been re-enabled. Tracepoint probes can execute in IRQ or softirq context. On 32-bit architectures, u64_stats_update_begin() disables preemption but not interrupts, relying on seqcount writes. If a nested interrupt occurs on the same CPU during the 64-bit stats update, the reentrant seqcount update can corrupt the seqcount state or stats value. Fix this by performing the 64-bit per-CPU stats update before releasing drop_queue.lock via spin_unlock_irqrestore(), ensuring local interrupts remain disabled during the u64_stats update.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Fix memory leak in bpf_jit_free() When bpf_int_jit_compile() is called for subprograms, it returns early during the first pass (!prog->is_func || extra_pass is false), keeping ctx->offset alive for the subsequent extra pass. If JIT compilation fails for a later subprogram, the BPF core aborts and calls bpf_jit_free() to clean up the first subprogram. However, bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory leak of the JIT context offsets array. So fix this by adding the missing kvfree(jit_data->ctx.offset) in bpf_jit_free().

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg() tcp_bpf_sendmsg() keeps msg_tx across sk_stream_wait_memory(), which drops and reacquires the socket lock. Its error path tries to decide whether msg_tx names the local temporary message by comparing it with the current value of psock->cork. This comparison is unsafe when two threads send on the same socket: Thread A Thread B msg_tx = psock->cork sk_msg_alloc() fails sk_stream_wait_memory() releases the socket lock acquires the socket lock completes the cork psock->cork = NULL frees the cork reacquires the socket lock msg_tx != psock->cork sk_msg_free(msg_tx) The stale cork is therefore mistaken for the local temporary message and freed again. KASAN reported: BUG: KASAN: slab-use-after-free in sk_msg_free+0x49/0x50 Read of size 4 at addr ffff88810c908800 by task poc/90 Call Trace: sk_msg_free+0x49/0x50 tcp_bpf_sendmsg+0x14f5/0x...

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free freeing trigger private data Commit 61d445af0a7c ("tracing: Add bulk garbage collection of freeing event_trigger_data") moved the kfree() of event_trigger_data to a kthread that runs tracepoint_synchronize_unregister() before freeing. That removed the synchronization the trigger .free callbacks used to get implicitly and inline from trigger_data_free(). event_hist_trigger_free(), event_hist_trigger_named_free() and event_enable_trigger_free() free their satellite data (hist_data, cmd_ops, enable_data) right after trigger_data_free() returns. With the synchronization now deferred to the kthread, a concurrent tracepoint handler can still reach that data through the list_del_rcu()'d trigger, causing a use-after-free. The histogram teardown must stay synchronous: remove_hist_vars() and unregister_field_var_hists() have to detach a synthetic event from the histogram before the trigger-removal ...