In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Fix uninitialized stack variable issue with dmsintc Variable vector[] is declared on stack in function dmsintc_inject_irq() and sometimes it is used without initialized. Here fix this issue.

A user with physical access to a smartphone can bypass authentication mechanism of Kidsview mobile application and grant himself full access to the device owner's account by interacting with application's push notification. This issue was fixed in version 4.4.3

In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Free init resources if kvm_init() fails kvm_loongarch_init() calls kvm_loongarch_env_init() to allocate the per-CPU kvm_context (vmcs) and kvm_loongarch_ops and to register the perf callbacks, and then calls kvm_init(). If kvm_init() fails its result is returned directly, but since module_init() does not run the module_exit() stuff on failure, so kvm_loongarch_env_exit() is never called and those resources are leaked. So call kvm_loongarch_env_exit() when kvm_init() fails, matching the teardown-on-failure pattern used by riscv_kvm_init().

In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Preserve memslot arch flags on KVM_MR_FLAGS_ONLY kvm_arch_prepare_memory_region() computes new->arch.flags, i.e. whether a memslot is KVM_MEM_HUGEPAGE_CAPABLE or KVM_MEM_HUGEPAGE_INCAPABLE, only for KVM_MR_CREATE and KVM_MR_MOVE, and returns early for every other change. But the generic code allocates a zeroed memslot for every change and never copies old->arch, so after a KVM_MR_FLAGS_ONLY update, e.g. toggling KVM_MEM_LOG_DIRTY_PAGES for live migration, the active memslot has arch.flags == 0. With both flags clear, fault_supports_huge_mapping() falls through to the alignment check on the HVA range alone, which no longer verifies that the GPA and HVA have the same offset within a PMD. A memslot that was marked KVM_MEM_HUGEPAGE_INCAPABLE because of a GPA/HVA offset mismatch can then be mapped with PMD entries on read faults, and since kvm_map_page() aligns the gfn and the pfn independently, the guest

In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Validate MSI data before routing it to EIOINTC pch_msi_set_irq() passes e->msi.data straight into eiointc_set_irq() as the irq number. The MSI data comes from userspace, that either via a KVM_IRQ_ROUTING_MSI entry set with KVM_SET_GSI_ROUTING (used by irqfd and KVM_IRQ_LINE) or directly via KVM_SIGNAL_MSI, and is never checked against EIOINTC_IRQS. eiointc_set_irq() uses the value with __set_bit()/__clear_bit() on the 256-bit isr bitmap, eiointc_update_irq() then indexes sw_coremap[] and the per-cpu coreisr/sw_coreisr bitmaps with it. Therefore a data value >= 256 reads and writes memory past the end of those arrays, i.e. any process holding a VM fd can corrupt kernel memory beyond the allocation of loongarch_eiointc. Reject MSI data that doesn't fit in the EIOINTC irq space. The DMSINTC path is unaffected as it decodes the vector from the address and masks it.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Refactor jump offset calculation in tail call The old macro-based jmp_offset calculation derives the jump distance from a stale prior-pass code stride, which can lead to wrong branch offsets and soft lockups under extra JIT passes. Fix this by calculating the offset directly on the absolute target: "ctx->offset[insn + 1] - ctx->idx". To avoid a false 16-bit range check abort during size estimation, add a "ctx->image == NULL" guard to inject a safe dummy offset.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Move arena register slot below TCC context Currently, the stack layout places the optional arena register slot above the tail call counter context. When arena_vm_start is dynamically enabled, it shifts the relative offset of the tcc_ptr slot within the stack frame, causing hardcoded tracking macros to mismatch and leading to memory misalignment or corruption potentially. To fix this, move the arena register save and restore sequences below the tail call counter context slots in both build_prologue() and the epilogue. Update __build_epilogue() to insert a proper offset decrement to safely skip the unneeded tcc_ptr reading block while accurately aligning with the relocated arena slot at the very bottom. With this patch, the tcc_ptr slot is always positioned at a fixed distance directly underneath the base callee-saved registers that is independent of whether the arena features are on.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix acpi_package_ids[] array overflow With LoongArch virt machine, a typical setting is one core per socket, there will max 256 sockets (packages) on one VM. With PPTT acpi table, array acpi_package_ids[] will be overflowed. Here change the array size of acpi_package_ids[] with the max value of MAX_PACKAGES and KVM_MAX_VCPUS.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Do not save/restore percpu base register in rethook trampoline The rethook trampoline saves $r21 ($u0), the percpu base, into its frame at entry and restores it at exit. Inbetween rethook_trampoline_handler() may schedule via preempt_enable_notrace(). If the task migrates to another CPU, the frame's $r21 holds the old CPU's percpu base, and restoring it poisons $r21 on the new CPU. Until the next user->kernel transition heals $r21, all this_cpu_*() accesses (runqueues, RCU per-CPU data, timer tick programming, FPU ownership) hit the wrong CPU's percpu area. Under kretprobe-heavy preemptible load this can corrupt scheduler and timer state: scheduling-while-atomic splats, wrong-CPU RCU warnings, WARN_ON_ONCE(rq != this_rq()) in nohz_balance_exit_idle(), and CPUs parking in the idle loop with the constant timer never re-armed (hard lockup). Reproduces on a Loongson-3A6000 with kretprobes on VFS paths plus h

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Avoid preempt count underflow without probe LoongArch uses break 11 for the breakpoint placed after an instruction that Kprobes executes out of line. Since userspace can issue the same break instruction, do_bp() can reach kprobe_singlestep_handler() when there is no current probe. The handler actually returns false in this case, but it first calls preempt_enable_no_resched(). The corresponding preempt_disable() is done by kprobe_breakpoint_handler() on a real Kprobe hit, so it has not run here. As a result, an ordinary userspace breakpoint (code 11) underflows the current task's preempt count. This also makes in_interrupt() return true until the task schedules. One visible consequence is the socket cgroup attribution: cgroup_sk_alloc() treats the allocation as interrupt context and assigns the socket to the root cgroup. A socket opened from the SIGTRAP handler can then avoid a BPF_CGROUP_INET_SOCK_CREATE

In the Linux kernel, the following vulnerability has been resolved: media: airspy: use vb2_video_unregister_device() on disconnect to fix NULL deref airspy_disconnect() clears s->udev under v4l2_lock, but airspy_stop_streaming() unconditionally calls airspy_ctrl_msg() and airspy_free_stream_bufs() afterwards. If a streaming user closes the device after disconnect, stop_streaming() runs and dereferences the NULL s->udev: airspy_stop_streaming() airspy_ctrl_msg(s, CMD_RECEIVER_MODE, 0, 0, NULL, 0) usb_sndctrlpipe(s->udev, 0) /* NULL deref */ airspy_free_stream_bufs(s) usb_free_coherent(s->udev, ...) /* NULL deref */ The airspy driver uses vb2_fop_release() in its file_operations, so replace video_unregister_device(&s->vdev) with vb2_video_unregister_device(&s->vdev) and move it before clearing s->udev. vb2_video_unregister_device() releases the vb2 queue, which synchronously runs airspy_stop_streaming() if streaming is active, so the URBs, coherent D

In the Linux kernel, the following vulnerability has been resolved: media: cec: core: Fix kmemleak due to missed rc_free_device() call The commit dccc0c3ddf8f ("media: rc: fix race between unregister and urb/irq callbacks") removed the implicit call to rc_free_device() from rc_unregister_device(). However, the commit missed to remove the NULL assignment of adap->rc that is now causing rc_free_device() to never be called on an allocated rc device. kmemleak reports following after e.g. dw-hdmi unbind: unreferenced object 0xffff00010ac10000 (size 4096): comm "kworker/u16:1", pid 39, jiffies 4294897739 hex dump (first 32 bytes): 20 23 4b 0a 01 00 ff ff 08 00 c1 0a 01 00 ff ff #K............. 08 00 c1 0a 01 00 ff ff 00 00 00 00 00 00 00 00 ................ backtrace (crc e11baccc): kmemleak_alloc+0x38/0x44 __kmalloc_cache_noprof+0x4a8/0x5e0 rc_allocate_device+0x48/0x2a0 cec_allocate_adapter+0x3ac/0x800 dw_hdmi_cec_probe+0x264/0x634 platform_probe

Autel Maxi Charger Single firmware through V1.03.51 permits unrestricted access to the NXP i.MX6 recovery mode through exposed hardware recovery pins. An attacker with physical access can boot attacker-controlled code in memory and modify or extract firmware and other sensitive data.

In the Linux kernel, the following vulnerability has been resolved: media: cec: disable delayed work before freeing an interrupted transmit cec_transmit_msg_fh() drops adap->lock to wait for a blocking transmit in wait_for_completion_killable(). If that wait is interrupted by a signal, cancel_delayed_work_sync() can run before the CEC kthread arms the reply timeout via schedule_delayed_work(&data->work) in cec_transmit_done_ts(). The work is then armed after the cancel, and the data is freed with its delayed_work still pending: ODEBUG: free active (active state 0) object: ... hint: cec_wait_timeout Use disable_delayed_work_sync(): it cancels the work and disables it, so the later schedule_delayed_work() becomes a no-op and the work cannot be re-armed. The data is freed right after, so it need not be re-enabled.

In the Linux kernel, the following vulnerability has been resolved: media: cec: extron-da-hd-4k-plus: add sanity check Add check to prevent overflowing msg.msg[] in case the incoming data is malformed.

In the Linux kernel, the following vulnerability has been resolved: media: cec: Serialize exclusive follower delivery cec_receive_notify() reads the exclusive follower pointer without the adapter lock. Serialize the no-follower check and message delivery against mode changes and release.

In the Linux kernel, the following vulnerability has been resolved: media: cedrus: fix memory leak in cedrus_init_ctrls() In cedrus_init_ctrls(), the V4L2 control handler is initialized before allocating memory for ctx->ctrls. If this allocation fails, the function returns -ENOMEM without freeing the previously allocated handler resources, leading to a memory leak. Fix this by calling v4l2_ctrl_handler_free() on the ctx->ctrls allocation failure path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an Allwinner SoC or board with a Cedrus VPU available to test with, no runtime testing was able to be performed.

In the Linux kernel, the following vulnerability has been resolved: media: cobalt: Avoid freeing ALSA private data twice snd_cobalt_card_create() stores cobsc in sc->private_data and installs snd_cobalt_card_private_free() as sc->private_free. From that point, snd_card_free(sc) releases cobsc through the ALSA card cleanup path. If cobalt_alsa_init() fails after snd_cobalt_card_create(), the err_exit_free path calls snd_card_free(sc) and then kfree(cobsc). That second free releases the same object again. Remove the explicit kfree(cobsc) and leave ownership with the ALSA card. This issue was found by a static analysis checker and confirmed by manual source review.

In the Linux kernel, the following vulnerability has been resolved: media: cx231xx: reject geometry changes while the VBI queue is busy vidioc_s_fmt_vid_cap() and vidioc_s_std() change the device-wide dev->width / dev->norm but only refuse the change when the *video* queue (dev->vidq) is busy. The VBI queue (dev->vbiq) shares that same geometry: cx231xx_init_vbi_isoc() latches dma_q->lines_per_field from dev->norm, the VBI videobuf2 plane is sized from dev->width / dev->norm in vbi_queue_setup() and vbi_buf_prepare(), and cx231xx_do_vbi_copy() then recomputes the destination offset from the *live* dev->width and the latched lines_per_field on every URB completion: offset = lines_completed * (dev->width << 1) + ...; if (dma_q->current_field == 2) offset += dev->width * 2 * dma_q->lines_per_field; memcpy(plane + offset, p_buffer, lencopy); Because the VBI node shares video_ioctl_ops with the video node, an application can size a small VBI plane (REQBUFS/QBUF with a small width,

In the Linux kernel, the following vulnerability has been resolved: media: cx23885: cancel NetUP CI work before teardown netup_ci_exit() frees a netup_ci_state while its work item, netup_read_ci_status(), may still be pending or running on the system workqueue. The worker obtains the state with container_of() and dereferences it, so it must not outlive the state. netup_ci_init() queues the initial status read, and CI GPIO interrupts subsequently queue the same work from netup_ci_slot_status(). During remove, cx23885_finidev() calls free_irq() before the CI device is unregistered. free_irq() prevents further IRQ handlers from running, but does not drain work queued previously, so the worker can run after netup_ci_exit() frees the state. Call cancel_work_sync() before dvb_ca_en50221_release() and kfree(). This issue was found by an in-house static analysis tool.