In the Linux kernel, the following vulnerability has been resolved: media: em28xx: defer audio-only extension registration The audio-only path registers extensions while probing the primary device. For a dual-TS board, this happens before dev_next is created. The duplicate device inherits is_audio_only and is then independently inserted into em28xx_devlist. The list is intended to contain only primary devices: extension operations reach the secondary device through dev_next. The independently linked secondary can be freed during disconnect while its list node remains reachable, resulting in a use-after-free. Defer audio-only extension registration to the module-request work item. It runs only after probing has completed construction of the optional secondary device, so only the primary is registered and extension callbacks reach the secondary through dev_next.

In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix use-after-free of dev_next->devlist on disconnect When a device with has_dual_ts=1 is probed and the is_audio_only path is taken, both dev and dev->dev_next are added to the global em28xx_devlist via em28xx_init_extension(). However, during disconnect, em28xx_close_extension(dev) only calls list_del(&dev->devlist), leaving dev->dev_next->devlist still linked in the global list. When dev_next is subsequently freed via kref_put(), its devlist entry becomes a dangling pointer in em28xx_devlist. The next device probe that calls em28xx_init_extension() triggers a list corruption BUG when list_add_tail detects the freed node. This bug was exposed by commit a368ecde8a50 ("USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor") which clears reserved bits in bEndpointAddress during endpoint parsing. This causes fuzzed endpoint addresses like 0xf3 to be normalized to 0x83, which

In the Linux kernel, the following vulnerability has been resolved: media: go7007: defer the ALSA v4l2 put until card release go7007_snd_init() already takes a v4l2_device reference for the ALSA side, but go7007_snd_remove() drops it immediately after calling snd_card_free_when_closed(). That is too early when a userspace process still has the capture PCM open. The ALSA card and its PCM callbacks remain alive until the last file is closed, so the release path can still reach struct go7007 through pcm->private_data and call go7007_snd_hw_free() after the V4L2 release path has freed the object. Move the matching v4l2_device_put() to the ALSA card private_free callback so the existing ALSA reference covers the whole deferred card lifetime.

Autel Maxi Charger Single firmware through V1.03.51 exposes an accessible UART interface that permits interruption of the boot process and access to the U-Boot bootloader. An attacker with physical access can modify the boot configuration or file system to obtain operating system access.

In the Linux kernel, the following vulnerability has been resolved: media: i2c: imx415: Release runtime PM reference on VBLANK error The VBLANK path returned immediately when programming VMAX failed after pm_runtime_get_if_in_use() had taken a runtime PM reference. Break out of the switch instead so the common pm_runtime_put() path is used.

In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov02a10: fix endpoint parsing use-after-free The ov02a10_check_hwcfg() function calls fwnode_handle_put(ep) immediately after allocating and parsing the endpoint. However, it subsequently calls fwnode_property_read_u32() using the same 'ep' handle, leading to a potential use-after-free. Additionally, reading the optional 'ovti,mipi-clock-voltage' property used to overwrite the 'ret' variable. If the property was missing, 'ret' would become negative, and this failure code would be incorrectly returned at the end of the function, causing probe to fail entirely. Fix the use-after-free by moving fwnode_property_read_u32() before the endpoint is parsed and freed. Avoid the error leak by not assigning the result of fwnode_property_read_u32() to 'ret'.

In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov7740: fix use-after-destroy in remove The ov7740_remove() function had a severe teardown order bug where it destroyed the driver's mutex before freeing the V4L2 control handler which relies on that mutex, leading to a use-after-destroy kernel panic. Furthermore, the driver explicitly called v4l2_ctrl_handler_free() and mutex_destroy() sequentially, but then called ov7740_free_controls() which invokes both of them a second time, resulting in a double-free. This patch fixes the issue by unregistering the subdevice first, and relying exclusively on ov7740_free_controls() to safely tear down the mutex and control handler in the correct order.

In the Linux kernel, the following vulnerability has been resolved: media: intel/ipu6: fix async notifier cleanup leak on parse error isys_notifier_init() calls v4l2_async_nf_init() and then adds fwnode remote subdevs in a loop with v4l2_async_nf_add_fwnode_remote(). If an endpoint parse or add fails partway through the loop, it jumps to err_parse and returns without calling v4l2_async_nf_cleanup(), leaking every v4l2_async_connection already added to the notifier's waiting list. The register-failure path just below already cleans up correctly, and the caller only tears the notifier down (isys_notifier_cleanup()) once isys_notifier_init() has returned success. Clean up the notifier on the parse error path too.

In the Linux kernel, the following vulnerability has been resolved: media: platform: mtk-mdp3: Fix SCP device refcounting mdp_probe() first tries to get the SCP handle with scp_get(). When that fails, it falls back to looking up the SCP platform device with __get_pdev_by_id() and then reads its driver data. The fallback lookup returns the platform device with a reference, just like scp_get() does. However, the fallback path currently drops that reference immediately after platform_get_drvdata(). The driver later still calls scp_put(mdp->scp) unconditionally from the probe error path and from mdp_video_device_release(), which drops the SCP device reference again. Keep the fallback reference until the existing scp_put() call, so that the fallback path follows the same ownership rules as the scp_get() path.

In the Linux kernel, the following vulnerability has been resolved: media: platform: mtk-mdp3: fix NULL deref on failed SCP lookup Add the missing sanity check after looking up the SCP to avoid dereferencing a NULL-pointer in case its driver has not yet been bound.

In the Linux kernel, the following vulnerability has been resolved: media: rc: sunxi-cir: Unregister rc device on probe failure After rc_register_device() succeeds, later probe failures must undo the registration with rc_unregister_device(). The current error path jumps to the allocation cleanup label and only calls rc_free_device(), leaving the rc device registration and resources created by rc_register_device() behind. Add a registered-device unwind label for the IRQ lookup, IRQ request, and hardware initialization failure paths. Keep rc_free_device() for failures before rc_register_device() succeeds.

In the Linux kernel, the following vulnerability has been resolved: media: rkvdec: hevc: guard INTER_REF_PIC_SET_PRED index underflow st_ref_pic_set_prediction() computes the reference RPS index as st_rps_idx - (delta_idx_minus1 + 1) per HEVC spec equation 7-59. Both operands are u8, so when delta_idx_minus1 + 1 exceeds the current index the subtraction wraps and the subsequent array access at calculated_rps_st_sets[ref_rps_idx] reads far out of bounds. A userspace V4L2 client that can open the RKVDEC m2m decoder can submit an EXT_SPS_ST_RPS control with INTER_REF_PIC_SET_PRED set and delta_idx_minus1 crafted to trigger the underflow. Reject the entry early when the reference index would underflow.

In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to NULL before any pending streaming teardown has run. When user space later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming() which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases each coherent buffer with: usb_free_coherent(dev->udev, dev->buf_size, dev->buf_list[dev->buf_num], dev->dma_addr[dev->buf_num]); usb_free_coherent() returns immediately when its dev argument is NULL, so every DMA stream buffer that was live at disconnect is silently leaked. The URBs allocated in rtl2832_sdr_alloc_urbs() outlive the device for the same reason. The rtl2832_sdr driver uses vb2_fop_release() in its file_operations, so replace video_unregister_device(&dev->vdev) with vb2_video_unregister_device(&dev

In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(), rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and shares a single err: label that only unlocks the mutex and returns. When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs() itself returns -ENOMEM after alloc_stream_bufs() has already succeeded, the URBs and/or the coherent DMA stream buffers stay allocated while streaming reports failure to vb2. Two latent defects follow on the next VIDIOC_STREAMON: 1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently leaking the coherent DMA memory allocated by the previous attempt. 2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only increments it. After a second successful pass urbs_i

Autel Maxi Charger Single firmware through V1.03.51 contains a heap-based buffer overflow in the set_ap_param command handled by the /localcfg endpoint. An authenticated attacker can supply oversized input, resulting in denial of service and potentially arbitrary code execution.

In the Linux kernel, the following vulnerability has been resolved: media: s2255: bound JPEG frame size before copying into the buffer s2255_fillbuff() memcpy()s vc->jpg_size bytes of a captured JPEG/MJPEG frame into the vb2 plane. vc->jpg_size is taken verbatim from the S2255_MARKER_FRAME header the device sends (pdword[4] in save_frame()) and, unlike the frame payload length just above it, is never bounded: payload = le32_to_cpu(pdword[3]); if (payload > vc->req_image_size) /* payload is checked ... */ return -EINVAL; vc->pkt_size = payload; vc->jpg_size = le32_to_cpu(pdword[4]); /* ... jpg_size is not */ A malicious or malfunctioning device can therefore report a jpg_size larger than the destination vb2 plane, and the memcpy() writes past it. jpg_size is a signed int, so a value with the top bit set also turns into a huge length. Reject a frame whose jpg_size is negative or exceeds the plane size before copying it.

In the Linux kernel, the following vulnerability has been resolved: media: s2255: check firmware size before reading trailing marker s2255_probe() reads a 4-byte marker and version from the last 8 bytes of the firmware blob (fw->data[fw_size - 8] and [fw_size - 4]). If the firmware file is shorter than 8 bytes, fw_size - 8 underflows and the access reads out of bounds. Validate the firmware size before indexing.

In the Linux kernel, the following vulnerability has been resolved: media: saa7164: fix cleanup on resource allocation failure saa7164_dev_setup() adds the device to the global saa7164_devlist before requesting the PCI BAR memory regions. If get_resources() fails, saa7164_dev_setup() decrements the device count and returns an error, but leaves the device on saa7164_devlist. The probe error path then frees the device, leaving a dangling entry on the global list. Reuse the existing MMIO mapping error path to remove the device from saa7164_devlist and decrement the device count before returning. Also release BAR0 if it was successfully requested but the BAR2 request fails.

In the Linux kernel, the following vulnerability has been resolved: media: tda18250: fix possible integer overflow Integer overflow may occur, when variable exp equals to zero. Result of shift 1 << (exp - 1) may then leads to undefined behavior.

In the Linux kernel, the following vulnerability has been resolved: media: ti: vpe: quiesce overflow recovery before freeing streams The VIP overflow recovery worker is armed from the hardirq handler when a FIFO overflow is detected, and the list-complete path looks the stream up through the VPDMA list private pointer. Both keep touching stream, port and device state; the recovery worker also resets the parser and VPDMA, repopulates the descriptor list, and re-enables the per-list IRQs. vip_stop_streaming() masks and clears the per-list IRQs, but it neither synchronizes the hardirq handler nor disables recovery_work. An overflow IRQ that has already queued recovery_work, or a list-complete IRQ in flight when the stream is torn down, can therefore still dereference the stream after its resources are released: the descriptor list is freed by vip_release_stream() on file release, and the stream itself by free_stream() on unbind/remove. Drain the recovery worker and the IRQ handler at