In the Linux kernel, the following vulnerability has been resolved: ASoC: rockchip: Fix PM usage reference of rockchip_i2s_tdm_resume pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8192-mt6359: Fix error handling in mt8192_mt6359_dev_probe The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error paths. Fix this by calling of_node_put() in error handling too.

In the Linux kernel, the following vulnerability has been resolved: ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mxs: Fix error handling in mxs_sgtl5000_probe This function only calls of_node_put() in the regular path. And it will cause refcount leak in error paths. For example, when codec_np is NULL, saif_np[0] and saif_np[1] are not NULL, it will cause leaks. of_node_put() will check if the node pointer is NULL, so we can call it directly to release the refcount of regular pointers.

In the Linux kernel, the following vulnerability has been resolved: ASoC: atmel: Fix error handling in sam9x5_wm8731_driver_probe The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error path.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8195: Fix error handling in mt8195_mt6359_rt1019_rt5682_dev_probe The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error path.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd934x: Add missing of_node_put() in wcd934x_codec_parse_data The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This is similar to commit 64b92de9603f ("ASoC: wcd9335: fix a leaked reference by adding missing of_node_put")

In the Linux kernel, the following vulnerability has been resolved: ath11k: free peer for station when disconnect from AP for QCA6390/WCN6855 Commit b4a0f54156ac ("ath11k: move peer delete after vdev stop of station for QCA6390 and WCN6855") is to fix firmware crash by changing the WMI command sequence, but actually skip all the peer delete operation, then it lead commit 58595c9874c6 ("ath11k: Fixing dangling pointer issue upon peer delete failure") not take effect, and then happened a use-after-free warning from KASAN. because the peer->sta is not set to NULL and then used later. Change to only skip the WMI_PEER_DELETE_CMDID for QCA6390/WCN6855. log of user-after-free: [ 534.888665] BUG: KASAN: use-after-free in ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888696] Read of size 8 at addr ffff8881396bb1b8 by task rtcwake/2860 [ 534.888705] CPU: 4 PID: 2860 Comm: rtcwake Kdump: loaded Tainted: G W 5.15.0-wt-ath+ #523 [ 534.888712] Hardware name: Intel(R...

In the Linux kernel, the following vulnerability has been resolved: ath11k: add missing of_node_put() to avoid leak The node pointer is returned by of_find_node_by_type() or of_parse_phandle() with refcount incremented. Calling of_node_put() to aovid the refcount leak.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF due to race between btf_try_get_module and load_module While working on code to populate kfunc BTF ID sets for module BTF from its initcall, I noticed that by the time the initcall is invoked, the module BTF can already be seen by userspace (and the BPF verifier). The existing btf_try_get_module calls try_module_get which only fails if mod->state == MODULE_STATE_GOING, i.e. it can increment module reference when module initcall is happening in parallel. Currently, BTF parsing happens from MODULE_STATE_COMING notifier callback. At this point, the module initcalls have not been invoked. The notifier callback parses and prepares the module BTF, allocates an ID, which publishes it to userspace, and then adds it to the btf_modules list allowing the kernel to invoke btf_try_get_module for the BTF. However, at this point, the module has not been fully initialized (i.e. its initcalls have not finished). The cod...

In the Linux kernel, the following vulnerability has been resolved: ath9k_htc: fix uninit value bugs Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing field initialization. In htc_connect_service() svc_meta_len and pad are not initialized. Based on code it looks like in current skb there is no service data, so simply initialize svc_meta_len to 0. htc_issue_send() does not initialize htc_frame_hdr::control array. Based on firmware code, it will initialize it by itself, so simply zero whole array to make KMSAN happy Fail logs: BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline] hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline] htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275 ... Un...

In the Linux kernel, the following vulnerability has been resolved: net: dsa: Avoid cross-chip syncing of VLAN filtering Changes to VLAN filtering are not applicable to cross-chip notifications. On a system like this: .-----. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-' '-1-2-' '-1-2-' Before this change, upon sw1p1 leaving a bridge, a call to dsa_port_vlan_filtering would also be made to sw2p1 and sw3p1. In this scenario: .---------. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-3-4-' '-1-2-' '-1-2-' When sw1p4 would leave a bridge, dsa_port_vlan_filtering would be called for sw2 and sw3 with a non-existing port - leading to array out-of-bounds accesses and crashes on mv88e6xxx.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Call dc_stream_release for remove link enc assignment [Why] A porting error resulted in the stream assignment for the link being retained without being released - a memory leak. [How] Fix the porting error by adding back the dc_stream_release() intended as part of the original patch.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes() In amdgpu_dm_connector_add_common_modes(), amdgpu_dm_create_common_mode() is assigned to mode and is passed to drm_mode_probed_add() directly after that. drm_mode_probed_add() passes &mode->head to list_add_tail(), and there is a dereference of it in list_add_tail() without recoveries, which could lead to NULL pointer dereference on failure of amdgpu_dm_create_common_mode(). Fix this by adding a NULL check of mode. This bug was found by a static analyzer. Builds with 'make allyesconfig' show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: rtw88: fix memory overrun and memory leak during hw_scan Previously we allocated less memory than actual required, overwrite to the buffer causes the mm module to complaint and raise access violation faults. Along with potential memory leaks when returned early. Fix these by passing the correct size and proper deinit flow.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix possible memory leak in mt7915_mcu_add_sta Free allocated skb in mt7915_mcu_add_sta routine in case of failures.

In the Linux kernel, the following vulnerability has been resolved: ptp: unregister virtual clocks when unregistering physical clock. When unregistering a physical clock which has some virtual clocks, unregister the virtual clocks with it. This fixes the following oops, which can be triggered by unloading a driver providing a PTP clock when it has enabled virtual clocks: BUG: unable to handle page fault for address: ffffffffc04fc4d8 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:ptp_vclock_read+0x31/0xb0 Call Trace: timecounter_read+0xf/0x50 ptp_vclock_refresh+0x2c/0x50 ? ptp_clock_release+0x40/0x40 ptp_aux_kworker+0x17/0x30 kthread_worker_fn+0x9b/0x240 ? kthread_should_park+0x30/0x30 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a btf decl_tag bug when tagging a function syzbot reported a btf decl_tag bug with stack trace below: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 3592 Comm: syz-executor914 Not tainted 5.16.0-syzkaller-11424-gb7892f7d5cb2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:btf_type_vlen include/linux/btf.h:231 [inline] RIP: 0010:btf_decl_tag_resolve+0x83e/0xaa0 kernel/bpf/btf.c:3910 ... Call Trace: <TASK> btf_resolve+0x251/0x1020 kernel/bpf/btf.c:4198 btf_check_all_types kernel/bpf/btf.c:4239 [inline] btf_parse_type_sec kernel/bpf/btf.c:4280 [inline] btf_parse kernel/bpf/btf.c:4513 [inline] btf_new_fd+0x19fe/0x2370 kernel/bpf/btf.c:6047 bpf_btf_load kernel/bpf/syscall.c:4039 [inline] __sys_bpf+0x1cbb/0x5970 kern...

In the Linux kernel, the following vulnerability has been resolved: igc: avoid kernel warning when changing RX ring parameters Calling ethtool changing the RX ring parameters like this: $ ethtool -G eth0 rx 1024 on igc triggers kernel warnings like this: [ 225.198467] ------------[ cut here ]------------ [ 225.198473] Missing unregister, handled but fix driver [ 225.198485] WARNING: CPU: 7 PID: 959 at net/core/xdp.c:168 xdp_rxq_info_reg+0x79/0xd0 [...] [ 225.198601] Call Trace: [ 225.198604] <TASK> [ 225.198609] igc_setup_rx_resources+0x3f/0xe0 [igc] [ 225.198617] igc_ethtool_set_ringparam+0x30e/0x450 [igc] [ 225.198626] ethnl_set_rings+0x18a/0x250 [ 225.198631] genl_family_rcv_msg_doit+0xca/0x110 [ 225.198637] genl_rcv_msg+0xce/0x1c0 [ 225.198640] ? rings_prepare_data+0x60/0x60 [ 225.198644] ? genl_get_cmd+0xd0/0xd0 [ 225.198647] netlink_rcv_skb+0x4e/0xf0 [ 225.198652] genl_rcv+0x24/0x40 [ 225.198655] netlink_unicast+0x20e/0x330 [ 225.198659] netlink_sen...

In the Linux kernel, the following vulnerability has been resolved: net: asix: add proper error handling of usb read errors Syzbot once again hit uninit value in asix driver. The problem still the same -- asix_read_cmd() reads less bytes, than was requested by caller. Since all read requests are performed via asix_read_cmd() let's catch usb related error there and add __must_check notation to be sure all callers actually check return value. So, this patch adds sanity check inside asix_read_cmd(), that simply checks if bytes read are not less, than was requested and adds missing error handling of asix_read_cmd() all across the driver code.