In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921s: fix a possible memory leak in mt7921_load_patch Always release fw data at the end of mt7921_load_patch routine.

In the Linux kernel, the following vulnerability has been resolved: power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()： If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put().

In the Linux kernel, the following vulnerability has been resolved: cxl/port: Hold port reference until decoder release KASAN + DEBUG_KOBJECT_RELEASE reports a potential use-after-free in cxl_decoder_release() where it goes to reference its parent, a cxl_port, to free its id back to port->decoder_ida. BUG: KASAN: use-after-free in to_cxl_port+0x18/0x90 [cxl_core] Read of size 8 at addr ffff888119270908 by task kworker/35:2/379 CPU: 35 PID: 379 Comm: kworker/35:2 Tainted: G OE 5.17.0-rc2+ #198 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: events kobject_delayed_cleanup Call Trace: <TASK> dump_stack_lvl+0x59/0x73 print_address_description.constprop.0+0x1f/0x150 ? to_cxl_port+0x18/0x90 [cxl_core] kasan_report.cold+0x83/0xdf ? to_cxl_port+0x18/0x90 [cxl_core] to_cxl_port+0x18/0x90 [cxl_core] cxl_decoder_release+0x2a/0x60 [cxl_core] device_release+0x5f/0x100 kobject_cleanup+0x80/0x1c0 The device core only guarantees parent lifetime unt...

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: anx7625: Fix overflow issue on reading EDID The length of EDID block can be longer than 256 bytes, so we should use `int` instead of `u8` for the `edid_pos` variable.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: populate connector of struct dp_panel DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose and expect DP source return correct checksum. During drm edid read, correct edid checksum is calculated and stored at connector::real_edid_checksum. The problem is struct dp_panel::connector never be assigned, instead the connector is stored in struct msm_dp::connector. When we run compliance testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid edid set in struct dp_panel::edid so we'll try to use the connectors real_edid_checksum and hit a NULL pointer dereference error because the connector pointer is never assigned. Changes in V2: -- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps() Changes in V3: -- remove unhelpful kernel crash trace commit text -- remove renaming dp_display parameter to dp Changes in V4: -- add more details to comm...

In the Linux kernel, the following vulnerability has been resolved: dax: make sure inodes are flushed before destroy cache A bug can be triggered by following command $ modprobe nd_pmem && modprobe -r nd_pmem [ 10.060014] BUG dax_cache (Not tainted): Objects remaining in dax_cache on __kmem_cache_shutdown() [ 10.060938] Slab 0x0000000085b729ac objects=9 used=1 fp=0x000000004f5ae469 flags=0x200000000010200(slab|head|node) [ 10.062433] Call Trace: [ 10.062673] dump_stack_lvl+0x34/0x44 [ 10.062865] slab_err+0x90/0xd0 [ 10.063619] __kmem_cache_shutdown+0x13b/0x2f0 [ 10.063848] kmem_cache_destroy+0x4a/0x110 [ 10.064058] __x64_sys_delete_module+0x265/0x300 This is caused by dax_fs_exit() not flushing inodes before destroy cache. To fix this issue, call rcu_barrier() before destroy cache.

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: fix memory leak during D3hot to D0 transition If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does not have No_Soft_Reset bit set in its PMCSR config register), then the current PCI state will be saved locally in 'vfio_pci_core_device::pm_save' during D0->D3hot transition and same will be restored back during D3hot->D0 transition. For saving the PCI state locally, pci_store_saved_state() is being used and the pci_load_and_free_saved_state() will free the allocated memory. But for reset related IOCTLs, vfio driver calls PCI reset-related API's which will internally change the PCI power state back to D0. So, when the guest resumes, then it will get the current state as D0 and it will skip the call to vfio_pci_set_power_state() for changing the power state to D0 explicitly. In this case, the memory pointed by 'pm_save' will never be freed. In a malicious sequence, the state changing to D3hot fo...

In the Linux kernel, the following vulnerability has been resolved: drm/dp: Fix OOB read when handling Post Cursor2 register The link_status array was not large enough to read the Adjust Request Post Cursor2 register, so remove the common helper function to avoid an OOB read, found with a -Warray-bounds build: drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_get_adjust_request_post_cursor': drivers/gpu/drm/drm_dp_helper.c:59:27: error: array subscript 10 is outside array bounds of 'const u8[6]' {aka 'const unsigned char[6]'} [-Werror=array-bounds] 59 | return link_status[r - DP_LANE0_1_STATUS]; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/drm_dp_helper.c:147:51: note: while referencing 'link_status' 147 | u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE], | ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Replace the only user of the helper with an open-coded fetch and decode, simil...

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix abort all task initialization In pm80xx_send_abort_all(), the n_elem field of the ccb used is not initialized to 0. This missing initialization sometimes lead to the task completion path seeing the ccb with a non-zero n_elem resulting in the execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(), causing a crash such as: [ 197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280 [ 197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012 [ 197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0 [ 197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0 [ 197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b [ 197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000 [ 197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000 [ 197.741493] FS: 0000000000000000(0000) GS:ffff889bbc...

In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Fix reference leak in tegra_dsi_ganged_probe The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add put_device() call to fix this.

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix race at socket teardown Fix a race in the xsk socket teardown code that can lead to a NULL pointer dereference splat. The current xsk unbind code in xsk_unbind_dev() starts by setting xs->state to XSK_UNBOUND, sets xs->dev to NULL and then waits for any NAPI processing to terminate using synchronize_net(). After that, the release code starts to tear down the socket state and free allocated memory. BUG: kernel NULL pointer dereference, address: 00000000000000c0 PGD 8000000932469067 P4D 8000000932469067 PUD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 25 PID: 69132 Comm: grpcpp_sync_ser Tainted: G I 5.16.0+ #2 Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.2.10 03/09/2015 RIP: 0010:__xsk_sendmsg+0x2c/0x690 [...] RSP: 0018:ffffa2348bd13d50 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000040 RCX: ffff8d5fc632d258 RDX: 0000000000400000 RSI: ffffa2348bd13e10 RDI: ffff8d5fc5489800 RBP: ff...

In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Don't use DSISR for SLB faults Since commit 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.") we use page_fault_is_write(regs->dsisr) in __bad_page_fault() to determine if the fault is for a read or write, and change the message printed accordingly. But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data Storage Interrupt Status Register) to a useful value. All ISA versions from v2.03 through v3.1 specify that the Data Segment Interrupt sets DSISR "to an undefined value". As far as I can see there's no mention of SLB faults setting DSISR in any BookIV content either. This manifests as accesses that should be a read being incorrectly reported as writes, for example, using the xmon "dump" command: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [359526.415354][ C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000 [359526.415611][ C6] Fault...

In the Linux kernel, the following vulnerability has been resolved: ath10k: Fix error handling in ath10k_setup_msa_resources The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error path.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init The reference counting issue happens in several error handling paths on a refcounted object "nc->dmac". In these paths, the function simply returns the error code, forgetting to balance the reference count of "nc->dmac", increased earlier by dma_request_channel(), which may cause refcount leaks. Fix it by decrementing the refcount of specific object in those error paths.

In the Linux kernel, the following vulnerability has been resolved: mips: cdmm: Fix refcount leak in mips_cdmm_phys_base The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount.

In the Linux kernel, the following vulnerability has been resolved: MIPS: pgalloc: fix memory leak caused by pgd_free() pgd page is freed by generic implementation pgd_free() since commit f9cb654cb550 ("asm-generic: pgalloc: provide generic pgd_free()"), however, there are scenarios that the system uses more than one page as the pgd table, in such cases the generic implementation pgd_free() won't be applicable anymore. For example, when PAGE_SIZE_4KB is enabled and MIPS_VA_BITS_48 is not enabled in a 64bit system, the macro "PGD_ORDER" will be set as "1", which will cause allocating two pages as the pgd table. Well, at the same time, the generic implementation pgd_free() just free one pgd page, which will result in the memory leak. The memory leak can be easily detected by executing shell command: "while true; do ls > /dev/null; grep MemFree /proc/meminfo; done"

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full If tcp_bpf_sendmsg() is running while sk msg is full. When sk_msg_alloc() returns -ENOMEM error, tcp_bpf_sendmsg() goes to wait_for_memory. If partial memory has been alloced by sk_msg_alloc(), that is, msg_tx->sg.size is greater than osize after sk_msg_alloc(), memleak occurs. To fix we use sk_msg_trim() to release the allocated memory, then goto wait for memory. Other call paths of sk_msg_alloc() have the similar issue, such as tls_sw_sendmsg(), so handle sk_msg_trim logic inside sk_msg_alloc(), as Cong Wang suggested. This issue can cause the following info: WARNING: CPU: 3 PID: 7950 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0 Call Trace: <TASK> inet_csk_destroy_sock+0x55/0x110 __tcp_close+0x279/0x470 tcp_close+0x1f/0x60 inet_release+0x3f/0x80 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0x92/0x250 task_work_run+0x6a/0xa0 do_e...

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Prevent some integer underflows My static checker complains that: drivers/infiniband/hw/irdma/ctrl.c:3605 irdma_sc_ceq_init() warn: can subtract underflow 'info->dev->hmc_fpm_misc.max_ceqs'? It appears that "info->dev->hmc_fpm_misc.max_ceqs" comes from the firmware in irdma_sc_parse_fpm_query_buf() so, yes, there is a chance that it could be zero. Even if we trust the firmware, it's easy enough to change the condition just as a hardenning measure.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix memleak in sk_psock_queue_msg If tcp_bpf_sendmsg is running during a tear down operation we may enqueue data on the ingress msg queue while tear down is trying to free it. sk1 (redirect sk2) sk2 ------------------- --------------- tcp_bpf_sendmsg() tcp_bpf_send_verdict() tcp_bpf_sendmsg_redir() bpf_tcp_ingress() sock_map_close() lock_sock() lock_sock() ... blocking sk_psock_stop sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED); release_sock(sk); lock_sock() sk_mem_charge() get_page() sk_psock_queue_msg() sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED); drop_sk_msg() release_sock() While drop_sk_msg(), the msg has charged memory form sk by sk_mem_charge and has sg pages need to put. To fix we use sk_msg_free() and then kfee() msg. This issue can cause the following info: WARNING: CPU: 0 PID: 9202 at net/core/stream.c:205 sk_stream_kill_queues+0xc8/0xe0 Ca...

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix memory leak in error flow for subscribe event routine In case the second xa_insert() fails, the obj_event is not released. Fix the error unwind flow to free that memory to avoid a memory leak.