In the Linux kernel, the following vulnerability has been resolved: usb: gadget: Fix use-after-free bug by not setting udc->dev.driver The syzbot fuzzer found a use-after-free bug: BUG: KASAN: use-after-free in dev_uevent+0x712/0x780 drivers/base/core.c:2320 Read of size 8 at addr ffff88802b934098 by task udevd/3689 CPU: 2 PID: 3689 Comm: udevd Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 dev_uevent+0x712/0x780 drivers/base/core.c:2320 uevent_show+0x1b8/0x380 drivers/base/core.c:2391 dev_attr_show+0x4b/0x90 drivers/base/core.c:2094 Although the bug manifested in the driver core, the real cause was a race with the gadget c...

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: rndis: prevent integer overflow in rndis_set_response() If "BufOffset" is very large the "BufOffset + 8" operation can have an integer overflow.

In the Linux kernel, the following vulnerability has been resolved: Input: aiptek - properly check endpoint type Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. There was a check for the number of endpoints, but not for the type of endpoint. Fix it by replacing old desc.bNumEndpoints check with usb_find_common_endpoints() helper for finding endpoints Fail log: usb 5-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Workqueue: usb_hub_wq hub_event ... Call Trace: <TASK> aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830 input_open_device+0x1bb/0x320 drivers/input/input.c:629 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Page fault in reply q processing A page fault was encountered in mpt3sas on a LUN reset error path: [ 145.763216] mpt3sas_cm1: Task abort tm failed: handle(0x0002),timeout(30) tr_method(0x0) smid(3) msix_index(0) [ 145.778932] scsi 1:0:0:0: task abort: FAILED scmd(0x0000000024ba29a2) [ 145.817307] scsi 1:0:0:0: attempting device reset! scmd(0x0000000024ba29a2) [ 145.827253] scsi 1:0:0:0: [sg1] tag#2 CDB: Receive Diagnostic 1c 01 01 ff fc 00 [ 145.837617] scsi target1:0:0: handle(0x0002), sas_address(0x500605b0000272b9), phy(0) [ 145.848598] scsi target1:0:0: enclosure logical id(0x500605b0000272b8), slot(0) [ 149.858378] mpt3sas_cm1: Poll ReplyDescriptor queues for completion of smid(0), task_type(0x05), handle(0x0002) [ 149.875202] BUG: unable to handle page fault for address: 00000007fffc445d [ 149.885617] #PF: supervisor read access in kernel mode [ 149.894346] #PF: error_code(0x0000) - n...

In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: Fix bug in pipe direction for control transfers The syzbot fuzzer reported a minor bug in the usbtmc driver: usb 5-1: BOGUS control dir, pipe 80001e80 doesn't match bRequestType 0 WARNING: CPU: 0 PID: 3813 at drivers/usb/core/urb.c:412 usb_submit_urb+0x13a5/0x1970 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 3813 Comm: syz-executor122 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0 ... Call Trace: <TASK> usb_start_wait_urb+0x113/0x530 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x2a5/0x4b0 drivers/usb/core/message.c:153 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1947 [inline] The problem is that usbtmc_ioctl_request() uses usb_rcvctrlpipe() for all of its transfers, whether they are in or out. It's easy to fix.

In the Linux kernel, the following vulnerability has been resolved: btrfs: skip reserved bytes warning on unmount after log cleanup failure After the recent changes made by commit c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it") and its followup fix, commit 651740a5024117 ("btrfs: check WRITE_ERR when trying to read an extent buffer"), we can now end up not cleaning up space reservations of log tree extent buffers after a transaction abort happens, as well as not cleaning up still dirty extent buffers. This happens because if writeback for a log tree extent buffer failed, then we have cleared the bit EXTENT_BUFFER_UPTODATE from the extent buffer and we have also set the bit EXTENT_BUFFER_WRITE_ERR on it. Later on, when trying to free the log tree with free_log_tree(), which iterates over the tree, we can end up getting an -EIO error when trying to read a node or a leaf, since read_extent_buffer_pages() returns -EIO if an extent buffer does not have EXT...

In the Linux kernel, the following vulnerability has been resolved: audit: don't deref the syscall args when checking the openat2 open_how::flags As reported by Jeff, dereferencing the openat2 syscall argument in audit_match_perm() to obtain the open_how::flags can result in an oops/page-fault. This patch fixes this by using the open_how struct that we store in the audit_context with audit_openat2_how(). Independent of this patch, Richard Guy Briggs posted a similar patch to the audit mailing list roughly 40 minutes after this patch was posted.

In the Linux kernel, the following vulnerability has been resolved: ima: fix reference leak in asymmetric_verify() Don't leak a reference to the key if its algorithm is unknown.

In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix potential CAN frame reception race in isotp_rcv() When receiving a CAN frame the current code logic does not consider concurrently receiving processes which do not show up in real world usage. Ziyang Xuan writes: The following syz problem is one of the scenarios. so->rx.len is changed by isotp_rcv_ff() during isotp_rcv_cf(), so->rx.len equals 0 before alloc_skb() and equals 4096 after alloc_skb(). That will trigger skb_over_panic() in skb_put(). ======================================================= CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc8-syzkaller #0 RIP: 0010:skb_panic+0x16c/0x16e net/core/skbuff.c:113 Call Trace: <TASK> skb_over_panic net/core/skbuff.c:118 [inline] skb_put.cold+0x24/0x24 net/core/skbuff.c:1990 isotp_rcv_cf net/can/isotp.c:570 [inline] isotp_rcv+0xa38/0x1e30 net/can/isotp.c:668 deliver net/can/af_can.c:574 [inline] can_rcv_filter+0x445/0x8d0 net/can/af_can.c:635 ca...

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes iattr::ia_size is a loff_t, so these NFSv3 procedures must be careful to deal with incoming client size values that are larger than s64_max without corrupting the value. Silently capping the value results in storing a different value than the client passed in which is unexpected behavior, so remove the min_t() check in decode_sattr3(). Note that RFC 1813 permits only the WRITE procedure to return NFS3ERR_FBIG. We believe that NFSv3 reference implementations also return NFS3ERR_FBIG when ia_size is too large.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix ia_size underflow iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and NFSv4 both define file size as an unsigned 64-bit type. Thus there is a range of valid file size values an NFS client can send that is already larger than Linux can handle. Currently decode_fattr4() dumps a full u64 value into ia_size. If that value happens to be larger than S64_MAX, then ia_size underflows. I'm about to fix up the NFSv3 behavior as well, so let's catch the underflow in the common code path: nfsd_setattr().

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix the behavior of READ near OFFSET_MAX Dan Aloni reports: > Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to > the RPC read layers") on the client, a read of 0xfff is aligned up > to server rsize of 0x1000. > > As a result, in a test where the server has a file of size > 0x7fffffffffffffff, and the client tries to read from the offset > 0x7ffffffffffff000, the read causes loff_t overflow in the server > and it returns an NFS code of EINVAL to the client. The client as > a result indefinitely retries the request. The Linux NFS client does not handle NFS?ERR_INVAL, even though all NFS specifications permit servers to return that status code for a READ. Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed and return a short result. Set the EOF flag in the result to prevent the client from retrying the READ request. This behavior appears to be consistent with Solaris NFS servers. ...

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Fix deadlock on DSI device attach error DSI device attach to DSI host will be done with host device's lock held. Un-registering host in "device attach" error path (ex: probe retry) will result in deadlock with below call trace and non operational DSI display. Startup Call trace: [ 35.043036] rt_mutex_slowlock.constprop.21+0x184/0x1b8 [ 35.043048] mutex_lock_nested+0x7c/0xc8 [ 35.043060] device_del+0x4c/0x3e8 [ 35.043075] device_unregister+0x20/0x40 [ 35.043082] mipi_dsi_remove_device_fn+0x18/0x28 [ 35.043093] device_for_each_child+0x68/0xb0 [ 35.043105] mipi_dsi_host_unregister+0x40/0x90 [ 35.043115] vc4_dsi_host_attach+0xf0/0x120 [vc4] [ 35.043199] mipi_dsi_attach+0x30/0x48 [ 35.043209] tc358762_probe+0x128/0x164 [tc358762] [ 35.043225] mipi_dsi_drv_probe+0x28/0x38 [ 35.043234] really_probe+0xc0/0x318 [ 35.043244] __driver_probe_device+0x80/0xe8 [ 35.043254] driver...

In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Add stag_work to all the vports Call trace seen when creating NPIV ports, only 32 out of 64 show online. stag work was not initialized for vport, hence initialize the stag work. WARNING: CPU: 8 PID: 645 at kernel/workqueue.c:1635 __queue_delayed_work+0x68/0x80 CPU: 8 PID: 645 Comm: kworker/8:1 Kdump: loaded Tainted: G IOE --------- -- 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge MX740c/0177V9, BIOS 2.12.2 07/09/2021 Workqueue: events fc_lport_timeout [libfc] RIP: 0010:__queue_delayed_work+0x68/0x80 Code: 89 b2 88 00 00 00 44 89 82 90 00 00 00 48 01 c8 48 89 42 50 41 81 f8 00 20 00 00 75 1d e9 60 24 07 00 44 89 c7 e9 98 f6 ff ff <0f> 0b eb c5 0f 0b eb a1 0f 0b eb a7 0f 0b eb ac 44 89 c6 e9 40 23 RSP: 0018:ffffae514bc3be40 EFLAGS: 00010006 RAX: ffff8d25d6143750 RBX: 0000000000000202 RCX: 0000000000000002 RDX: ffff8d2e31383748 RSI: ffff8d25c000d600 RDI: ffff8d2e31383788 RBP: ffff8d2e31380d...

In the Linux kernel, the following vulnerability has been resolved: scsi: myrs: Fix crash in error case In myrs_detect(), cs->disable_intr is NULL when privdata->hw_init() fails with non-zero. In this case, myrs_cleanup(cs) will call a NULL ptr and crash the kernel. [ 1.105606] myrs 0000:00:03.0: Unknown Initialization Error 5A [ 1.105872] myrs 0000:00:03.0: Failed to initialize Controller [ 1.106082] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.110774] Call Trace: [ 1.110950] myrs_cleanup+0xe4/0x150 [myrs] [ 1.111135] myrs_probe.cold+0x91/0x56a [myrs] [ 1.111302] ? DAC960_GEM_intr_handler+0x1f0/0x1f0 [myrs] [ 1.111500] local_pci_probe+0x48/0x90

In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Fix refcount issue when LOGO is received during TMF Hung task call trace was seen during LOGO processing. [ 974.309060] [0000:00:00.0]:[qedf_eh_device_reset:868]: 1:0:2:0: LUN RESET Issued... [ 974.309065] [0000:00:00.0]:[qedf_initiate_tmf:2422]: tm_flags 0x10 sc_cmd 00000000c16b930f op = 0x2a target_id = 0x2 lun=0 [ 974.309178] [0000:00:00.0]:[qedf_initiate_tmf:2431]: portid=016900 tm_flags =LUN RESET [ 974.309222] [0000:00:00.0]:[qedf_initiate_tmf:2438]: orig io_req = 00000000ec78df8f xid = 0x180 ref_cnt = 1. [ 974.309625] host1: rport 016900: Received LOGO request while in state Ready [ 974.309627] host1: rport 016900: Delete port [ 974.309642] host1: rport 016900: work event 3 [ 974.309644] host1: rport 016900: lld callback ev 3 [ 974.313243] [0000:61:00.2]:[qedf_execute_tmf:2383]:1: fcport is uploading, not executing flush. [ 974.313295] [0000:61:00.2]:[qedf_execute_tmf:2400]:1: task mgmt ...

In the Linux kernel, the following vulnerability has been resolved: usb: f_fs: Fix use-after-free for epfile Consider a case where ffs_func_eps_disable is called from ffs_func_disable as part of composition switch and at the same time ffs_epfile_release get called from userspace. ffs_epfile_release will free up the read buffer and call ffs_data_closed which in turn destroys ffs->epfiles and mark it as NULL. While this was happening the driver has already initialized the local epfile in ffs_func_eps_disable which is now freed and waiting to acquire the spinlock. Once spinlock is acquired the driver proceeds with the stale value of epfile and tries to free the already freed read buffer causing use-after-free. Following is the illustration of the race: CPU1 CPU2 ffs_func_eps_disable epfiles (local copy) ffs_epfile_release ffs_data_closed if (last file closed) ffs_data_reset ffs_data_clear ffs_epfiles_destroy spin_lock dereference epfiles Fix this races ...

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: avoid double fput() on failed usercopy If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact, dma_buf_fd() called fd_install() before, i.e. "consumed" one reference, leaving us with none. Calling dma_buf_put() will therefore put a reference we no longer own, leading to a valid file descritor table entry for an already released 'file' object which is a straight use-after-free. Simply avoid calling dma_buf_put() and rely on the process exit code to do the necessary cleanup, if needed, i.e. if the file descriptor is still valid.

In the Linux kernel, the following vulnerability has been resolved: phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable() This error path needs to decrement "usbphyc->n_pll_cons.counter" before returning.

In the Linux kernel, the following vulnerability has been resolved: tcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case syzbot found that mixing sendpage() and sendmsg(MSG_ZEROCOPY) calls over the same TCP socket would again trigger the infamous warning in inet_sock_destruct() WARN_ON(sk_forward_alloc_get(sk)); While Talal took into account a mix of regular copied data and MSG_ZEROCOPY one in the same skb, the sendpage() path has been forgotten. We want the charging to happen for sendpage(), because pages could be coming from a pipe. What is missing is the downgrading of pure zerocopy status to make sure sk_forward_alloc will stay synced. Add tcp_downgrade_zcopy_pure() helper so that we can use it from the two callers.