In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Really move i915_gem_context.link under ref protection i915_perf assumes that it can use the i915_gem_context reference to protect its i915->gem.contexts.list iteration. However, this requires that we do not remove the context from the list until after we drop the final reference and release the struct. If, as currently, we remove the context from the list during context_close(), the link.next pointer may be poisoned while we are holding the context reference and cause a GPF: [ 4070.573157] i915 0000:00:02.0: [drm:i915_perf_open_ioctl [i915]] filtering on ctx_id=0x1fffff ctx_id_mask=0x1fffff [ 4070.574881] general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP [ 4070.574897] CPU: 1 PID: 284392 Comm: amd_performance Tainted: G E 5.17.9 #180 [ 4070.574903] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918....

In the Linux kernel, the following vulnerability has been resolved: gpio: mockup: Fix potential resource leakage when register a chip If creation of software node fails, the locally allocated string array is left unfreed. Free it on error path.

In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: Set lineevent_state::irq after IRQ register successfully When running gpio test on nxp-ls1028 platform with below command gpiomon --num-events=3 --rising-edge gpiochip1 25 There will be a warning trace as below: Call trace: free_irq+0x204/0x360 lineevent_free+0x64/0x70 gpio_ioctl+0x598/0x6a0 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x5c/0x130 ...... el0t_64_sync+0x1a0/0x1a4 The reason of this issue is that calling request_threaded_irq() function failed, and then lineevent_free() is invoked to release the resource. Since the lineevent_state::irq was already set, so the subsequent invocation of free_irq() would trigger the above warning call trace. To fix this issue, set the lineevent_state::irq after the IRQ register successfully.

In the Linux kernel, the following vulnerability has been resolved: mm/slub: fix to return errno if kmalloc() fails In create_unique_id(), kmalloc(, GFP_KERNEL) can fail due to out-of-memory, if it fails, return errno correctly rather than triggering panic via BUG_ON(); kernel BUG at mm/slub.c:5893! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Call trace: sysfs_slab_add+0x258/0x260 mm/slub.c:5973 __kmem_cache_create+0x60/0x118 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x19c/0x31c mm/slab_common.c:335 kmem_cache_create+0x1c/0x28 mm/slab_common.c:390 f2fs_kmem_cache_create fs/f2fs/f2fs.h:2766 [inline] f2fs_init_xattr_caches+0x78/0xb4 fs/f2fs/xattr.c:808 f2fs_fill_super+0x1050/0x1e0c fs/f2fs/super.c:4149 mount_bdev+0x1b8/0x210 fs/super.c:1400 f2fs_mount+0x44/0x58 fs/f2fs/super.c:4512 legacy_get_tree+0x30/0x74 fs/fs_context.c:610 vfs_get_tree+0x40/0x140 fs/super.c:1530 do_new_mount+0x1dc/0x4e4 fs/namespace.c:3040 path_mount+0x358/0x914 fs/nam...

In the Linux kernel, the following vulnerability has been resolved: mm: slub: fix flush_cpu_slab()/__free_slab() invocations in task context. Commit 5a836bf6b09f ("mm: slub: move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context") moved all flush_cpu_slab() invocations to the global workqueue to avoid a problem related with deactivate_slab()/__free_slab() being called from an IRQ context on PREEMPT_RT kernels. When the flush_all_cpu_locked() function is called from a task context it may happen that a workqueue with WQ_MEM_RECLAIM bit set ends up flushing the global workqueue, this will cause a dependency issue. workqueue: WQ_MEM_RECLAIM nvme-delete-wq:nvme_delete_ctrl_work [nvme_core] is flushing !WQ_MEM_RECLAIM events:flush_cpu_slab WARNING: CPU: 37 PID: 410 at kernel/workqueue.c:2637 check_flush_dependency+0x10a/0x120 Workqueue: nvme-delete-wq nvme_delete_ctrl_work [nvme_core] RIP: 0010:check_flush_dependency+0x10a/0x120[ 453.262125] Call Trace: __flush_wo...

In the Linux kernel, the following vulnerability has been resolved: arm64: topology: fix possible overflow in amu_fie_setup() cpufreq_get_hw_max_freq() returns max frequency in kHz as *unsigned int*, while freq_inv_set_max_ratio() gets passed this frequency in Hz as 'u64'. Multiplying max frequency by 1000 can potentially result in overflow -- multiplying by 1000ULL instead should avoid that... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-private: Fix refcount leak bug in of_xudma_dev_get() We should call of_node_put() for the reference returned by of_parse_phandle() in fail path or when it is not used anymore. Here we only need to move the of_node_put() before the check.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Harden accesses to the reset domains Accessing reset domains descriptors by the index upon the SCMI drivers requests through the SCMI reset operations interface can potentially lead to out-of-bound violations if the SCMI driver misbehave. Add an internal consistency check before any such domains descriptors accesses.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix possible bogus match in nf_osf_find() nf_osf_find() incorrectly returns true on mismatch, this leads to copying uninitialized memory area in nft_osf which can be used to leak stale kernel stack data to userspace.

In the Linux kernel, the following vulnerability has been resolved: ice: Don't double unplug aux on peer initiated reset In the IDC callback that is accessed when the aux drivers request a reset, the function to unplug the aux devices is called. This function is also called in the ice_prepare_for_reset function. This double call is causing a "scheduling while atomic" BUG. [ 662.676430] ice 0000:4c:00.0 rocep76s0: cqp opcode = 0x1 maj_err_code = 0xffff min_err_code = 0x8003 [ 662.676609] ice 0000:4c:00.0 rocep76s0: [Modify QP Cmd Error][op_code=8] status=-29 waiting=1 completion_err=1 maj=0xffff min=0x8003 [ 662.815006] ice 0000:4c:00.0 rocep76s0: ICE OICR event notification: oicr = 0x10000003 [ 662.815014] ice 0000:4c:00.0 rocep76s0: critical PE Error, GLPE_CRITERR=0x00011424 [ 662.815017] ice 0000:4c:00.0 rocep76s0: Requesting a reset [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 66...

In the Linux kernel, the following vulnerability has been resolved: ice: Fix crash by keep old cfg when update TCs more than queues There are problems if allocated queues less than Traffic Classes. Commit a632b2a4c920 ("ice: ethtool: Prohibit improper channel config for DCB") already disallow setting less queues than TCs. Another case is if we first set less queues, and later update more TCs config due to LLDP, ice_vsi_cfg_tc() will failed but left dirty num_txq/rxq and tc_cfg in vsi, that will cause invalid pointer access. [ 95.968089] ice 0000:3b:00.1: More TCs defined than queues/rings allocated. [ 95.968092] ice 0000:3b:00.1: Trying to use more Rx queues (8), than were allocated (1)! [ 95.968093] ice 0000:3b:00.1: Failed to config TC for VSI index: 0 [ 95.969621] general protection fault: 0000 [#1] SMP NOPTI [ 95.969705] CPU: 1 PID: 58405 Comm: lldpad Kdump: loaded Tainted: G U W O --------- -t - 4.18.0 #1 [ 95.969867] Hardware name: O.E.M/BC11SPSCB10, BIOS...

In the Linux kernel, the following vulnerability has been resolved: ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header If an AF_PACKET socket is used to send packets through ipvlan and the default xmit function of the AF_PACKET socket is changed from dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and remains as the initial value of 65535, this may trigger slab-out-of-bounds bugs as following: ================================================================= UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 all Trace: print_address_description.constprop.0+0x1d/0x160 print_report.cold+0x4f/0x112 kasan_report+0xa3/0x130 ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] ipvlan_start_xmit+0x29/0xa0 [ipvlan] __dev_direct_xmit+0x2e2/...

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix memory leak in __qlt_24xx_handle_abts() Commit 8f394da36a36 ("scsi: qla2xxx: Drop TARGET_SCF_LOOKUP_LUN_FROM_TAG") made the __qlt_24xx_handle_abts() function return early if tcm_qla2xxx_find_cmd_by_tag() didn't find a command, but it missed to clean up the allocated memory for the management command.

In the Linux kernel, the following vulnerability has been resolved: mm/slab_common: fix possible double free of kmem_cache When doing slub_debug test, kfence's 'test_memcache_typesafe_by_rcu' kunit test case cause a use-after-free error: BUG: KASAN: use-after-free in kobject_del+0x14/0x30 Read of size 8 at addr ffff888007679090 by task kunit_try_catch/261 CPU: 1 PID: 261 Comm: kunit_try_catch Tainted: G B N 6.0.0-rc5-next-20220916 #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_address_description.constprop.0+0x87/0x2a5 print_report+0x103/0x1ed kasan_report+0xb7/0x140 kobject_del+0x14/0x30 kmem_cache_destroy+0x130/0x170 test_exit+0x1a/0x30 kunit_try_run_case+0xad/0xc0 kunit_generic_run_threadfn_adapter+0x26/0x50 kthread+0x17b/0x1b0 </TASK> The cause is inside kmem_cache_destroy(): kmem_cache_destroy acquire lock/mutex shutdown_cache schedule_work(kmem_cache_release) (if RCU flag set) ...

In the Linux kernel, the following vulnerability has been resolved: sfc: fix null pointer dereference in efx_hard_start_xmit Trying to get the channel from the tx_queue variable here is wrong because we can only be here if tx_queue is NULL, so we shouldn't dereference it. As the above comment in the code says, this is very unlikely to happen, but it's wrong anyway so let's fix it. I hit this issue because of a different bug that caused tx_queue to be NULL. If that happens, this is the error message that we get here: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [...] RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]

In the Linux kernel, the following vulnerability has been resolved: sfc: fix TX channel offset when using legacy interrupts In legacy interrupt mode the tx_channel_offset was hardcoded to 1, but that's not correct if efx_sepparate_tx_channels is false. In that case, the offset is 0 because the tx queues are in the single existing channel at index 0, together with the rx queue. Without this fix, as soon as you try to send any traffic, it tries to get the tx queues from an uninitialized channel getting these errors: WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/sfc/tx.c:540 efx_hard_start_xmit+0x12e/0x170 [sfc] [...] RIP: 0010:efx_hard_start_xmit+0x12e/0x170 [sfc] [...] Call Trace: <IRQ> dev_hard_start_xmit+0xd7/0x230 sch_direct_xmit+0x9f/0x360 __dev_queue_xmit+0x890/0xa40 [...] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [...] RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc] [...] Call Trace: <IRQ> dev_hard_start_xmit+0xd7/0x230 sch_direct_xmit+0x9f/0x36...

In the Linux kernel, the following vulnerability has been resolved: sfc/siena: fix null pointer dereference in efx_hard_start_xmit Like in previous patch for sfc, prevent potential (but unlikely) NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: net: enetc: deny offload of tc-based TSN features on VF interfaces TSN features on the ENETC (taprio, cbs, gate, police) are configured through a mix of command BD ring messages and port registers: enetc_port_rd(), enetc_port_wr(). Port registers are a region of the ENETC memory map which are only accessible from the PCIe Physical Function. They are not accessible from the Virtual Functions. Moreover, attempting to access these registers crashes the kernel: $ echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/sriov_numvfs pci 0000:00:01.0: [1957:ef00] type 00 class 0x020001 fsl_enetc_vf 0000:00:01.0: Adding to iommu group 15 fsl_enetc_vf 0000:00:01.0: enabling device (0000 -> 0002) fsl_enetc_vf 0000:00:01.0 eno0vf0: renamed from eth0 $ tc qdisc replace dev eno0vf0 root taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \ sched-entry S 0x7f 900000 sched-entry S 0x80 100000 flags 0x2 Un...

In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: avoid disabling offload when it was never enabled In an incredibly strange API design decision, qdisc->destroy() gets called even if qdisc->init() never succeeded, not exclusively since commit 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation"), but apparently also earlier (in the case of qdisc_create_dflt()). The taprio qdisc does not fully acknowledge this when it attempts full offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS parsed from netlink (in taprio_change(), tail called from taprio_init()). But in taprio_destroy(), we call taprio_disable_offload(), and this determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags). But looking at the implementation of FULL_OFFLOAD_IS_ENABLED() (a bitwise check of bit 1 in q->flags), it is invalid to call this macro on q->flags when it contains TA...

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix nft_counters_enabled underflow at nf_tables_addchain() syzbot is reporting underflow of nft_counters_enabled counter at nf_tables_addchain() [1], for commit 43eb8949cfdffa76 ("netfilter: nf_tables: do not leave chain stats enabled on error") missed that nf_tables_chain_destroy() after nft_basechain_init() in the error path of nf_tables_addchain() decrements the counter because nft_basechain_init() makes nft_is_base_chain() return true by setting NFT_CHAIN_BASE flag. Increment the counter immediately after returning from nft_basechain_init().