Поиск уязвимостей

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: account only unread bytes in read_skb() After a partial stream receive, rx_bytes tracks the unread suffix while buf_used and peer credit still cover the whole packet. virtio_transport_read_skb() dequeues that packet but passes pkt_len for both counters, underflowing rx_bytes. On a connected CID_LOCAL stream with an SK_SKB verdict, a 40-byte read from a 100-byte packet made SIOCINQ report -40, an empty recv return ELOOP, and poll report the empty socket readable. After verdict detach, receiving 40 bytes wrapped the counter to zero and hid those queued bytes until one more byte arrived. The fixed run kept the counter balanced and exposed all queued data immediately. This was found during an LLM-assisted manual source audit of VSOCK receive accounting while re-evaluating virtio_transport_read_skb() after CVE-2024-50169. Subtract only skb->len minus the VSOCK offset from rx_bytes. Retain the full packet...

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix P2P device removal race in brcmf_detach() When the driver is removed while the user space process that created the P2P device (e.g. wpa_supplicant) is still exiting, the P2P device interface is removed twice and the kernel crashes. The two paths are: - wpa_supplicant, on exit, sends NL80211_CMD_DEL_INTERFACE for the P2P device. nl80211_del_interface() holds RTNL and the wiphy mutex and calls brcmf_p2p_del_vif(), which disables discovery and waits up to 1.5 s for BRCMF_E_IF_DEL. Then it calls brcmf_remove_interface(), which unregisters the wdev and frees the vif and the ifp. - brcmf_detach() sets the bus down, so BRCMF_E_IF_DEL never arrives, and calls brcmf_remove_interface(ifp, false) for the same ifp. brcmf_p2p_ifp_removed() reads ifp->vif and then blocks on rtnl_lock(). When brcmf_p2p_del_vif() releases RTNL, it calls cfg80211_unregister_wdev() on the wdev that was already unregistered and fre...

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7603: initialize global station WCID mt7603 uses a driver-private global station WCID for frames that have neither a station nor a vif, including frames injected through a monitor interface. Unlike the core global WCID initialized by mt76_register_device(), this WCID is published without ever being passed to mt76_wcid_init(). Since commit 0335c034e726 ("wifi: mt76: fix race condition related to checking tx queue fill status"), mt76_tx() queues every such frame on the WCID's tx_pending or tx_offchannel queue and links its tx_list. The first injected frame therefore reaches __skb_queue_tail() with an uninitialized sk_buff_head and dereferences a NULL prev pointer. Initialize the WCID before publishing it. The fix was tested on an MT7603 PCIe device. Three wildcard probe requests were injected through a monitor interface. The hardware queue head and tail advanced from 0 to 3 and a second radio captured th...

Use after free in Accessibility in Google Chrome on Windows prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High)

In the Linux kernel, the following vulnerability has been resolved: wireguard: noise: reject response consumption after intermediate initiation Two threads begin processing the identical response message, received twice. The first thread, A, runs. While it's running, the second one, B, gets partway through, and during that slow calculation, or even while blocking on down_write(), A completes and then also a handshake initiation that's already been queued up runs in thread C, which itself takes that same down_write(). The handshake initiation creation succeeds, and sets the state back to waiting-for-response, and calls up_write(), at which point thread B resumes, because either its finished its calculations or was finally allowed to acquire down_write(). Thread B then copies the state back to the peer, and begins a new session, using that state, which is the same session as the one made in thread A. Thread AThread BThread C down_read() sA = handshake->state memcpy(cA, handshake->cryp...

In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix NULL current_pwq deref in chained work check current_wq_worker() only tells us that %current is a kworker. It does not guarantee that the worker is currently executing a work item, as worker->current_pwq is populated only while process_one_work() is running the work function. is_chained_work() can be reached while queueing on a draining or destroying workqueue. If a kworker outside work-item execution reaches that path, current_wq_worker() returns a worker but worker->current_pwq is NULL, and the chained-work test can fault before it emits the intended warning. Guard the chained-work test with worker->current_pwq. A kworker without current_pwq is not executing work on the target workqueue, so the helper should return false and let the draining/destroying warning fire.

In the Linux kernel, the following vulnerability has been resolved: xen/netfront: don't leak the skb when xennet_fill_frags() fails When a response chain has more slots than fit in the skb's frags, xennet_fill_frags() returns an error and xennet_poll() jumps to its error path. That path moves what's left on tmpq to errq to be freed, but the skb being filled was already dequeued from tmpq, so it's never freed. Each chain that overflows leaks the skb and the pages attached to it as frags, and the backend decides how many slots it sends. Put the skb back on tmpq before taking the error path, like the xennet_set_skb_gso() failure just above it does.

In the Linux kernel, the following vulnerability has been resolved: strparser: make sure __strp_recv isn't running before tearing down the parser The comment above strp_done() claims that if strp is stopped, strp_recv will no longer be called. That's only true if the caller has a mechanism (eg locking) to guarantee that strp_recv() calls that started before strp_stop() have completed by the time we call strp_done(). This adds a dummy lock_sock/release_sock pair to guarantee that any in-flight strp_recv() (which runs under either bh_lock_sock or lock_sock, depending if it's called from ->sk_data_ready or strp_work) has completed. Only espintcp can be affected by this race condition, but this patch makes sure no future user of strp can have the bug. This could crash on strp->sk ("general mode" of strp), but this mode has been here for 9 years and has never been used. It'll be gone soon, no point worrying about it. Switch the stopped/paused/etc bits to u8's to avoid races between strp_...

In the Linux kernel, the following vulnerability has been resolved: tcp: reject net_iov in zerocopy receive mapping hints After copying a readable prefix, receive_fallback_to_copy() asks tcp_zerocopy_set_hint_for_skb() where page mapping can resume. If the next skb is unreadable, find_next_mappable_frag() passes its net_iov fragment to can_map_frag(). skb_frag_page() returns NULL for a net_iov, but can_map_frag() dereferences it in PageCompound(). A v7.2 KASAN run on a connected TCP socket with 64 readable bytes followed by a 4096-byte NET_IOV_DMABUF fragment reported: BUG: KASAN: null-ptr-deref in can_map_frag tcp_zerocopy_receive -> can_map_frag Kernel panic - not syncing: KASAN: panic_on_warn set The diagnostic inserted the net_iov directly because the test host has no devmem-capable NIC. Hardware end-to-end reachability remains untested and requires CONFIG_NET_DEVMEM plus a supported DMA-buf-bound RX queue. Reject all net_iov fragments before skb_frag_page(). This covers both DM...

In the Linux kernel, the following vulnerability has been resolved: tipc: destroy topsrv workqueues before closing connections tipc_topsrv_stop() closed subscriber connections while the topology server's send and receive workqueues were still running. Socket callbacks and subscription events could then queue more work, and in-flight send/recv work could drop the last connection reference during the conn_idr walk. That race produced several teardown failures: refcount_t addition on 0 from conn_get() on a connection whose release was blocked on idr_lock, a subsequent use-after-free in tipc_conn_close(), queue_work() on an already destroyed workqueue from the listener data-ready callback, and an RCU stall in tipc_topsrv_exit_net() while the walk spun under idr_lock. Clear srv->listener under idr_lock so it acts as a shutdown flag, skip queue_work() once it is NULL, destroy the workqueues to flush in-flight work, and only then close the remaining connections. Refuse tipc_conn_lookup() a...

In the Linux kernel, the following vulnerability has been resolved: tipc: hold a reference to nodes found by link name tipc_node_find_by_name() returns a node after dropping its RCU read lock without taking a reference. The LINK_SET, LINK_GET and LINK_RESET_STATS handlers then lock and access the node, racing with timer-driven cleanup of a down peer. Generic netlink serialization does not exclude the node timer. The following interleaving can leave a handler using a freed node: CPU 0: find the node under RCU and release the node read lock CPU 1: tipc_node_timeout() clears the links and unlinks the down node CPU 1: drop the list and timer references, queuing tipc_node_free() CPU 0: leave the RCU read-side critical section CPU 1: complete the grace period and free the node CPU 0: acquire the node lock through the stale pointer LINK_SET also uses the node's media address after releasing the node lock, when passing queued packets to tipc_bearer_xmit(). KASAN on v7.3-rc5 reported: BUG:...

In the Linux kernel, the following vulnerability has been resolved: selinux: preserve NATIVE_LABELS on already-initialized sb in set_mnt_opts When an NFSv4 filesystem exported with security_label is mounted a second time, sget_fc() returns the existing superblock and nfs_get_root() calls security_sb_set_mnt_opts() again on it. Since the superblock is already SB_INITIALIZED, selinux_set_mnt_opts() takes an early exit without setting SECURITY_LSM_NATIVE_LABELS in *set_kern_flags. nfs_get_root() then sees kflags without SECURITY_LSM_NATIVE_LABELS set and clears NFS_CAP_SECURITY_LABEL on the shared nfs_server, silently disabling per-file labeling for both the new and the original mount. Commit 3815a245b501 ("security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock") fixed the same problem in selinux_sb_clone_mnt_opts(). The reused-superblock path for a plain second mount now goes through sb_set_mnt_opts rather than sb_clone_mnt_opts, so it needs the same treatment: on both...

In the Linux kernel, the following vulnerability has been resolved: fsverity: RCU-delay the freeing of struct fsverity_info __fsverity_get_info() calls rhashtable_lookup_fast(), which just uses rcu_read_lock() and doesn't directly synchronize with fsverity_remove_info(). For the same inode this isn't a problem: its fsverity_info is removed only at inode eviction time or upon failure to enable verity, when the inode no longer needs its fsverity_info and it will no longer be accessed via that inode. However, this is broken and can cause a use-after-free for concurrent __fsverity_get_info() for *different* inodes. Those rely on following fsverity_info::rhash_head in the rhashtable under rcu_read_lock() only. They also use fsverity_info::inode to do the key comparison. Fix this by RCU-delaying the freeing of 'struct fsverity_info' after it's been removed from the rhashtable.

In the Linux kernel, the following vulnerability has been resolved: gpio: mpsse: fix race when arming the IRQ poll worker gpio_mpsse_irq_enable() arms the poll worker before publishing it: schedule_work() runs before the worker is added to priv->workers. If gpio_mpsse_disconnect() walks the list in that window it misses the worker, and once disconnect returns, the USB core frees mpsse_priv while the orphaned gpio_mpsse_poll() work keeps accessing it, causing a use-after-free. Fix this by publishing and arming the worker in one irq_spin critical section. Teardown walks the same list under irq_spin, so a worker found on the list is guaranteed to be armed, and cancel_work_sync() handles it whether it is queued or running. A worker armed after the disconnect walk would still be missed, so also set a new priv->dying flag under irq_spin before the teardown walk, and check it in the same critical section, freeing it via kfree_rcu() instead when the device is going away, since kfree() would...

Use after free in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High)

In the Linux kernel, the following vulnerability has been resolved: gpio: xilinx: fix runtime PM leak on request error path pm_runtime_get_sync() leaves the usage counter incremented even when it fails, and xgpio_request() returns the error without dropping it. gpiolib does not call ->free() when ->request() fails, so xgpio_free(), which holds the only matching pm_runtime_put(), never runs. The reference is leaked and the controller can no longer runtime-suspend, so its clock stays enabled. Switch to pm_runtime_resume_and_get(), which only increments the usage counter on success.

In the Linux kernel, the following vulnerability has been resolved: gve: fix napi_disable deadlock when attempting to disable XSK pools When disabling XSK pools, GVE calls the unlocked versions of napi_disable and napi_enable. However, the netdev lock has already been acquired before ndo_bpf is called because GVE supports queue management ops. Calling the unlocked versions of napi_disable/enable results in a deadlock when attempting to disable XSK pools, as the thread attempts to re-acquire a lock it already holds. Update the NAPI calls to use the locked versions. This issue was found in production.

In the Linux kernel, the following vulnerability has been resolved: gve: fix XSK buffer leak when rings are stopped GVE does not free XSK buffers when resetting ring state as a part of stopping queues. This causes all XSK buffers which are posted to the NIC to be leaked. Free XSK buffers attached to an allocated buf_state when stopping rings. This issue was hit in production.

In the Linux kernel, the following vulnerability has been resolved: gve: fix XSK buffer leak on error descriptor When the error bit is set in the RX completion descriptor, the buf_state and its attached buffer should be freed. In the case of AF_XDP ZC, the XSK buffer was not freed, leading to a leak. This issue was caught by LLM.

In the Linux kernel, the following vulnerability has been resolved: ibmveth: h_free logical LAN on open-fail after register ibmveth_open() registers the logical LAN, then allocates the RX buffer pools. A pool failure jumps to out_free_buffer_pools without h_free_logical_lan(), so PHYP still owns the buffer-list page when it is unmapped. request_irq() failure already issued the hypercall before taking the same label. Move that h_free to the shared post-register unwind so both paths deregister before the buffer list is unmapped.