In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task Watchdog task might end between send_sig() and kthread_stop() calls, what results in the use-after-free issue. Fix this by increasing watchdog task reference count before calling send_sig() and dropping it by switching to kthread_stop_put().

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Don't allow pointer operations on unconfigured streams When reporting the pointer for a compressed stream we report the current I/O frame position by dividing the position by the number of channels multiplied by the number of container bytes. These values default to 0 and are only configured as part of setting the stream parameters so this allows a divide by zero to be configured. Validate that they are non zero, returning an error if not

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx4: Fix resource leak on error in mlx4_ib_create_srq() Sashiko points out that mlx4_srq_alloc() was not undone during error unwind, add the missing call to mlx4_srq_free().

In the Linux kernel, the following vulnerability has been resolved: ipmi: Add limits to event and receive message requests The driver would just fetch events and receive messages until the BMC said it was done. To avoid issues with BMCs that never say they are done, add a limit of 10 fetches at a time. In addition, an si interface has an attn state it can return from the hardware which is supposed to cause a flag fetch to see if the driver needs to fetch events or message or a few other things. If the attn bit gets stuck, it's a similar problem. So allow messages in between flag fetches so the driver itself doesn't get stuck. This is a more general fix than the previous fix for the specific bad BMC, but should fix the more general issue of a BMC that won't stop saying it has data. This has been there from the beginning of the driver. It's not a bug per-se, but it is accounting for bugs in BMCs.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init() mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When ib_create_srq() fails for s1, the error branch destroys s0 but falls through and unconditionally assigns the freed s0 and the ERR_PTR s1 to devr->s0 and devr->s1. This leads to several problems: the lock-free fast path checks "if (devr->s1) return 0;" and treats the ERR_PTR as already initialised; users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences the ERR_PTR and double-frees s0 on teardown. Fix by adding the same `goto unlock` in the s1 failure path.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix fsck inconsistency caused by FGGC of node block During FGGC node block migration, fsck may incorrectly treat the migrated node block as fsync-written data. The reproduction scenario: root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync root@vm:/mnt/f2fs# rm -f 1 root@vm:/mnt/f2fs# sync root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP SPO, "fsck --dry-run" find inode has already checkpointed but still with DENT_BIT_SHIFT set The root cause is that GC does not clear the dentry mark and fsync mark during node block migration, leading fsck to misinterpret them as user-issued fsync writes. In BGGC mode, node block migration is handled by f2fs_sync_node_pages(), which guarantees the dentry and fsync marks are cleared before writing. This patch move the set/clear of the fsync|dentry marks into __write_node_folio to make the logic clearer, and en...

In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache Make sure resources are not improperly shared in the op cache and cause instruction corruption this way.

In the Linux kernel, the following vulnerability has been resolved: exit: prevent preemption of oopsing TASK_DEAD task When an already-exiting task oopses, make_task_dead() currently calls do_task_dead() with preemption enabled. That is forbidden: do_task_dead() calls __schedule(), which has a comment saying "WARNING: must be called with preemption disabled!". If an oopsing task is preempted in do_task_dead(), between becoming TASK_DEAD and entering the scheduler explicitly, bad things happen: finish_task_switch() assumes that once the scheduler has switched away from a TASK_DEAD task, the task can never run again and its stack is no longer needed; but that assumption apparently doesn't hold if the dead task was preempted (the SM_PREEMPT case). This means that the scheduler ends up repeatedly dropping references on the dead task's stack, which can lead to use-after-free or double-free of the entire task stack; in other words, two tasks can end up running on the same stack, resultin...

In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm6: release dst on error in xfrm6_rcv_encap() xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not already have a dst attached. ip6_route_input_lookup() returns a referenced dst entry even when the lookup resolves to an error route. If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching the dst to the skb and without releasing the reference returned by the lookup. Repeated packets hitting this path therefore leak dst entries. Release the dst before jumping to the drop path.

In the Linux kernel, the following vulnerability has been resolved: riscv: kvm: fix vector context allocation leak When the second kzalloc (host_context.vector.datap) fails in kvm_riscv_vcpu_alloc_vector_context, the first allocation (guest_context.vector.datap) is leaked. Free it before returning.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: free sk if last When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(), and released at the end. If at that moment, it was the last reference being held, the sk would not be freed. sock_put() should then be called instead of __sock_put(). But that's not enough: if it is the last reference, sock_put() will call sk_free(), which will end up calling sk_stop_timer_sync() on the same timer, and waiting indefinitely to finish. So it is needed to mark that the timer is done at the end of the timer handler when it has not been rescheduled, not to call sk_stop_timer_sync() on "itself".

In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix uninit-value by validating catalog record size Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The root cause is that hfs_brec_read() doesn't validate that the on-disk record size matches the expected size for the record type being read. When mounting a corrupted filesystem, hfs_brec_read() may read less data than expected. For example, when reading a catalog thread record, the debug output showed: HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26 HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ! hfs_brec_read() only validates that entrylength is not greater than the buffer size, but doesn't check if it's less than expected. It successfully reads 26 bytes into a 520-byte structure and returns success, leaving 494 bytes uninitialized. This uninitialized data in tmp.thread.nodeName then gets copied by hfsplus_cat_build_key_uni() and used by hfsplus_strcasec...

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix scheduling with atomic in timestamp sockopt Using lock_sock_fast() (atomic context) around sock_set_timestamp() and sock_set_timestamping() is unsafe, as both helpers can sleep. Replace lock_sock_fast() with sleepable lock_sock()/release_sock() to avoid scheduling while atomic panic.

In the Linux kernel, the following vulnerability has been resolved: usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl Just like in a previous problem in this driver, usblp_ctrl_msg() will collapse the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. Ideally that short command should be detected and error out, but many printers are known to send "incorrect" responses back so we can't just do that. statusbuf is kmalloc(8) at probe time and never filled before the first LPGETSTATUS ioctl. usblp_read_status() requests 1 byte. If a malicious printer responds with zero bytes, *statusbuf is one byte of stale kmalloc heap, sign-extended into the local int status, which the LPGETSTATUS path then copy_to_user()s directly to the ioctl caller. Fix this all by just zapping out the memory buffer when allocated at probe time. If a later call does a short read, the data will be identical to what the device sent it the last time, so there is...

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: use safe list iteration in radar detect work The call to ieee80211_dfs_cac_cancel can cause the iterated chanctx to be freed and removed from the list. Guard against this to avoid a slab-use-after-free error.

In the Linux kernel, the following vulnerability has been resolved: openvswitch: vport: fix self-deadlock on release of tunnel ports vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. So, either in an RCU call or after the synchronize_net(). The rtnl_delete_link() must happen under RTNL and so can't be executed in RCU context. Calling synchronize_net() while holding RTNL is not a good idea for performance and system stability under load in general, so calling netdev_put() in RCU call is the right solution here. However, when the device is deleted, rtnl_unlock() will call netdev_run_todo() and block until all the references are gone. In the current code this means that we never reach the call_rcu() and the vport is never freed and the reference is never released, causing a self-deadlock on device removal. Fix that by moving the rcu_call() before the rtnl_unlock(), so the scheduled RCU callback will be executed when synchroni...

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix double free in create_space_info_sub_group() error path When kobject_init_and_add() fails, the call chain is: create_space_info_sub_group() -> btrfs_sysfs_add_space_info_type() -> kobject_init_and_add() -> failure -> kobject_put(&sub_group->kobj) -> space_info_release() -> kfree(sub_group) Then control returns to create_space_info_sub_group(), where: btrfs_sysfs_add_space_info_type() returns error -> kfree(sub_group) Thus, sub_group is freed twice. Keep parent->sub_group[index] = NULL for the failure path, but after btrfs_sysfs_add_space_info_type() has called kobject_put(), let the kobject release callback handle the cleanup.

In the Linux kernel, the following vulnerability has been resolved: wifi: b43legacy: enforce bounds check on firmware key index in RX path Same fix as b43: the firmware-controlled key index in b43legacy_rx() can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is non-enforcing in production builds, allowing an out-of-bounds read of dev->key[]. Make the check enforcing by dropping the frame for invalid indices.

In the Linux kernel, the following vulnerability has been resolved: ice: fix double free in ice_sf_eth_activate() error path When auxiliary_device_add() fails, ice_sf_eth_activate() jumps to aux_dev_uninit and calls auxiliary_device_uninit(&sf_dev->adev). The device release callback ice_sf_dev_release() frees sf_dev, but the current error path falls through to sf_dev_free and calls kfree(sf_dev) again, causing a double free. Keep kfree(sf_dev) for the auxiliary_device_init() failure path, but avoid falling through to sf_dev_free after auxiliary_device_uninit().

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix divide-by-zero in setup_geo() with zero far_copies setup_geo() extracts near_copies (nc) and far_copies (fc) from the user-provided layout parameter without checking for zero. When fc=0 with the "improved" far set layout selected, 'geo->far_set_size = disks / fc' triggers a divide-by-zero. Validate nc and fc immediately after extraction, returning -1 if either is zero.