In the Linux kernel, the following vulnerability has been resolved: bpf: Keep dynamic inner array lookups nullable An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its inner map template. A concrete inner array with a different max_entries value can then replace the template. After a successful outer map lookup, the verifier represents the resulting map pointer using the inner map template. Const-key lookup nullness elision consequently uses the template max_entries even though the runtime helper uses the concrete inner map max_entries. Do not elide lookup result nullness for maps marked with BPF_F_INNER_MAP, because the template max_entries does not prove that the key is in bounds for the concrete runtime map.

In the Linux kernel, the following vulnerability has been resolved: bpf: Allow LPM map access from sleepable BPF programs trie_lookup_elem() annotates its rcu_dereference_check() walks with only rcu_read_lock_bh_held(). Because rcu_dereference_check(p, c) resolves to "c || rcu_read_lock_held()", this passes for XDP/NAPI and classic RCU readers but fails for sleepable BPF programs, which enter via __bpf_prog_enter_sleepable() and hold only rcu_read_lock_trace(). trie_update_elem() and trie_delete_elem() have the same problem in a different form: they walk the trie with plain rcu_dereference(), which asserts rcu_read_lock_held() unconditionally. Both are reachable from sleepable BPF programs via the bpf_map_update_elem / bpf_map_delete_elem helpers, and from the syscall path under classic rcu_read_lock(). In the writer paths the trie is actually protected by trie->lock (an rqspinlock taken across the walk); we never relied on the RCU read-side lock to keep nodes alive there. A slee...

In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65535 read from header_start[2], then drives a memcmp() and the following skb_trim() and skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10, which is 14000 bytes. That is an out of bounds read. Require both the start and end framing headers to be present before subtracting them, on every loop iteration.

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info() cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream mapping update fails, the error path frees the allocated stream rings and stream_rings array, but leaves stream_ctx_array allocated. Free the stream context array before falling through to the stream_rings cleanup path.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup() The dwc3_ulpi_setup() calls the register read and write calls with dwc3->regs when both these calls take the dwc3 structure directly. Chnage these two calls to fix the following sparse warning, and possibly a nasty bug in the dwc3_ulpi_setup() code: drivers/usb/dwc3/core.c:796:45: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:796:45: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:796:45: got void [noderef] __iomem *regs drivers/usb/dwc3/core.c:798:40: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:798:40: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:798:40: got void [noderef] __iomem *regs

In the Linux kernel, the following vulnerability has been resolved: usb: free iso schedules on failed submit EHCI and FOTG210 isochronous submits build an ehci_iso_sched before linking the URB to the endpoint queue, and keep the staged schedule in urb->hcpriv until iso_stream_schedule() and the link helpers consume it. If the controller is no longer accessible, or usb_hcd_link_urb_to_ep() fails, submit jumps to done_not_linked before that handoff happens and leaks the staged schedule still attached to urb->hcpriv. Free the staged schedule from done_not_linked when submit fails before the URB is linked and clear urb->hcpriv after the free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an...

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head inside struct usb_composite_dev. config->descriptors[0] reads whatever sits at that offset. The memcpy copies up to w_length bytes of it into the response buffer. cdev->configs can be empty in two cases. One is a teardown race on gadget unbind with a control transfer in flight. The other is a driver that sets is_otg before it adds a config. A reproducer that holds cdev...

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: Fix use-after-free in gadget_match_driver The udc structure acts as the management structure for the gadget, but their lifecycles are decoupled. A race condition exists where usb_del_gadget() frees the udc memory (e.g., via mode-switch work) while gadget_match_driver() concurrently accesses the freed udc memory (e.g., via configfs), causing a Use-After-Free (UAF) that triggers a NULL pointer dereference when the freed memory is zeroed: [39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [39430.911397][ T1171] pc : __pi_strcmp+0x20/0x140 [39430.911441][ T1171] lr : gadget_match_driver+0x34/0x60 ... [39430.911890][ T1171] usb_gadget_register_driver_owner+0x50/0xf8 [39430.911910][ T1171] gadget_dev_desc_UDC_store+0xf4/0x140 [39430.931308][ T1171] configfs_write_iter+0xec/0x134 [39430.957058][ T1171] Workqueue: events_freezable __dwc3_set_mode ...

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_printer: take kref only for successful open printer_open() returns -EBUSY when the character device is already open, but it increments dev->kref regardless of the return value. VFS does not call ->release() for a failed open, so every rejected second open permanently leaks one reference. Move kref_get() into the successful-open branch.

In the Linux kernel, the following vulnerability has been resolved: USB: idmouse: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

In the Linux kernel, the following vulnerability has been resolved: USB: ldusb: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect Submitted write URBs are not stopped on close() and therefore need to be stopped unconditionally on disconnect() to avoid use-after-free in the completion handler.

In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

In the Linux kernel, the following vulnerability has been resolved: USB: legousbtower: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: bound bulk IN response length to the received transfer usbio_bulk_msg() copies bpkt_len = le16_to_cpu(bpkt->len) bytes out of the bulk IN buffer (usbio->rxbuf, allocated with size usbio->rxbuf_len) into the caller's buffer. bpkt_len is fully controlled by the device and is only checked against ibuf_len; ibuf_len in turn is checked against usbio->txbuf_len, not against rxbuf_len: if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) || (ibuf_len > (usbio->txbuf_len - sizeof(*bpkt)))) return -EMSGSIZE; txbuf_len and rxbuf_len are taken independently from the bulk OUT and bulk IN endpoint wMaxPacketSize in usbio_probe(). A malicious or malfunctioning device that advertises a large bulk OUT endpoint and a small bulk IN endpoint (e.g. by claiming one of the quirk-free IDs such as the Lattice NX33U, 0x2ac1:0x20cb) therefore makes ibuf_len, and hence the device-supplied bpkt_len, exceed rxbuf_len. memcpy...

In the Linux kernel, the following vulnerability has been resolved: USB: misc: uss720: unregister parport on probe failure uss720_probe() registers a parport before reading the 1284 register used to detect unsupported Belkin F5U002 adapters. If get_1284_register() fails, the error path drops the driver private data and the USB device reference, but leaves the parport device registered. Leaving the port registered is more than a private allocation leak: parport_register_port() has already reserved a parport number and registered the parport bus device, while pp->private_data still points at the private data that the common error path is about to release. Undo the pre-announce registration in the get_1284_register() failure branch before jumping to the common private-data cleanup path. Clear priv->pp first, matching the disconnect path and avoiding a stale pointer in the private data. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

In the Linux kernel, the following vulnerability has been resolved: usb: mtu3: unmap request DMA on queue failure mtu3_gadget_queue() maps the request before checking whether the QMU GPD ring can accept another transfer. the request is returned with -EAGAIN before it is linked on the endpoint request list if mtu3_prepare_transfer() fails. Normal completion and dequeue paths unmap requests from mtu3_req_complete(), but this error path never reaches that helper, so the DMA mapping is left active. Unmap the request before returning from the failed queue path.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan_pda: fix information leak The write() callback is supposed to return the number of characters accepted or a negative errno. Since the addition of write fifo support the keyspan_pda implementation will however return the number characters submitted to the device if the write urb is not already in use. If this number is larger than the number of characters passed to write(), the line discipline continues writing data from beyond the tty write buffer. Fix the information leak by making sure that keyspan_pda_write_start() returns zero on success as intended.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix broken rx after throttle If the port is closed while throttled, the read urb is never resubmitted and the port will not receive any further data until the device is reconnected (or the driver is rebound). Clear the throttle flags and submit the urb if needed when opening the port.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix hard lockup on disconnect If submitting the OOB write urb fails persistently (e.g if the device is being disconnected) the driver would loop indefinitely with interrupts disabled. Check for urb submission errors when sending OOB commands to avoid hanging if, for example, open(), set_termios() or close() races with a physical disconnect. This is issue was flagged by Sashiko when reviewing an unrelated change to the driver.