In the Linux kernel, the following vulnerability has been resolved: f2fs: fix infinite loop in __insert_extent_tree() When we get wrong extent info data, and look up extent_node in rb tree, it will cause infinite loop (CONFIG_F2FS_CHECK_FS=n). Avoiding this by return NULL and print some kernel messages in that case.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix mmap write lock not release If mmap write lock is taken while draining retry fault, mmap write lock is not released because svm_range_restore_pages calls mmap_read_unlock then returns. This causes deadlock and system hangs later because mmap read or write lock cannot be taken. Downgrade mmap write lock to read lock if draining retry fault fix this bug.

In the Linux kernel, the following vulnerability has been resolved: sctp: Prevent TOCTOU out-of-bounds write For the following path not holding the sock lock, sctp_diag_dump() -> sctp_for_each_endpoint() -> sctp_ep_dump() make sure not to exceed bounds in case the address list has grown between buffer allocation (time-of-check) and write (time-of-use).

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Shutdown FW DMA in bnxt_shutdown() The netif_close() call in bnxt_shutdown() only stops packet DMA. There may be FW DMA for trace logging (recently added) that will continue. If we kexec to a new kernel, the DMA will corrupt memory in the new kernel. Add bnxt_hwrm_func_drv_unrgtr() to unregister the driver from the FW. This will stop the FW DMA. In case the call fails, call pcie_flr() to reset the function and stop the DMA.

In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb The Mesa issue referenced below pointed out a possible deadlock: [ 1231.611031] Possible interrupt unsafe locking scenario: [ 1231.611033] CPU0 CPU1 [ 1231.611034] ---- ---- [ 1231.611035] lock(&xa->xa_lock#17); [ 1231.611038] local_irq_disable(); [ 1231.611039] lock(&fence->lock); [ 1231.611041] lock(&xa->xa_lock#17); [ 1231.611044] <Interrupt> [ 1231.611045] lock(&fence->lock); [ 1231.611047] *** DEADLOCK *** In this example, CPU0 would be any function accessing job->dependencies through the xa_* functions that don't disable interrupts (eg: drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()). CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling callback so in an interrupt con...

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_close_cached_fid() find_or_create_cached_dir() could grab a new reference after kref_put() had seen the refcount drop to zero but before cfid_list_lock is acquired in smb2_close_cached_fid(), leading to use-after-free. Switch to kref_put_lock() so cfid_release() is called with cfid_list_lock held, closing that gap.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix system hang caused by cpu-clock usage cpu-clock usage by the async-profiler tool can trigger a system hang, which got bisected back to the following commit by Octavia Togami: 18dbcbfabfff ("perf: Fix the POLL_HUP delivery breakage") causes this issue The root cause of the hang is that cpu-clock is a special type of SW event which relies on hrtimers. The __perf_event_overflow() callback is invoked from the hrtimer handler for cpu-clock events, and __perf_event_overflow() tries to call cpu_clock_event_stop() to stop the event, which calls htimer_cancel() to cancel the hrtimer. But that's a recursion into the hrtimer code from a hrtimer handler, which (unsurprisingly) deadlocks. To fix this bug, use hrtimer_try_to_cancel() instead, and set the PERF_HES_STOPPED flag, which causes perf_swevent_hrtimer() to stop the event once it sees the PERF_HES_STOPPED flag. [ mingo: Fixed the comments and improved the c...

In the Linux kernel, the following vulnerability has been resolved: NFSD: Define actions for the new time_deleg FATTR4 attributes NFSv4 clients won't send legitimate GETATTR requests for these new attributes because they are intended to be used only with CB_GETATTR and SETATTR. But NFSD has to do something besides crashing if it ever sees a GETATTR request that queries these attributes. RFC 8881 Section 18.7.3 states: > The server MUST return a value for each attribute that the client > requests if the attribute is supported by the server for the > target file system. If the server does not support a particular > attribute on the target file system, then it MUST NOT return the > attribute value and MUST NOT set the attribute bit in the result > bitmap. The server MUST return an error if it supports an > attribute on the target but cannot obtain its value. In that case, > no attribute values will be returned. Further, RFC 9754 Section 5 states: > These new attributes are invalid to b...

In the Linux kernel, the following vulnerability has been resolved: md/raid10: wait barrier before returning discard request with REQ_NOWAIT raid10_handle_discard should wait barrier before returning a discard bio which has REQ_NOWAIT. And there is no need to print warning calltrace if a discard bio has REQ_NOWAIT flag. Quality engineer usually checks dmesg and reports error if dmesg has warning/error calltrace.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix crash in nfsd4_read_release() When tracing is enabled, the trace_nfsd_read_done trace point crashes during the pynfs read.testNoFh test.

In the Linux kernel, the following vulnerability has been resolved: fbcon: Set fb_display[i]->mode to NULL when the mode is released Recently, we discovered the following issue through syzkaller: BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0 Read of size 4 at addr ff11000001b3c69c by task syz.xxx ... Call Trace: <TASK> dump_stack_lvl+0xab/0xe0 print_address_description.constprop.0+0x2c/0x390 print_report+0xb9/0x280 kasan_report+0xb8/0xf0 fb_mode_is_equal+0x285/0x2f0 fbcon_mode_deleted+0x129/0x180 fb_set_var+0xe7f/0x11d0 do_fb_ioctl+0x6a0/0x750 fb_ioctl+0xe0/0x140 __x64_sys_ioctl+0x193/0x210 do_syscall_64+0x5f/0x9c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Based on experimentation and analysis, during framebuffer unregistration, only the memory of fb_info->modelist is freed, without setting the corresponding fb_display[i]->mode to NULL for the freed modes. This leads to UAF issues during subsequent accesses. Here's an example of reproduction steps: 1. With /dev/fb0 ...

In the Linux kernel, the following vulnerability has been resolved: fbdev: bitblit: bound-check glyph index in bit_putcs* bit_putcs_aligned()/unaligned() derived the glyph pointer from the character value masked by 0xff/0x1ff, which may exceed the actual font's glyph count and read past the end of the built-in font array. Clamp the index to the actual glyph count before computing the address. This fixes a global out-of-bounds read reported by syzbot.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brc...

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential cfid UAF in smb2_query_info_compound When smb2_query_info_compound() retries, a previously allocated cfid may have been freed in the first attempt. Because cfid wasn't reset on replay, later cleanup could act on a stale pointer, leading to a potential use-after-free. Reinitialize cfid to NULL under the replay label. Example trace (trimmed): refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 11224 at ../lib/refcount.c:28 refcount_warn_saturate+0x9c/0x110 [...] RIP: 0010:refcount_warn_saturate+0x9c/0x110 [...] Call Trace: <TASK> smb2_query_info_compound+0x29c/0x5c0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] ? step_into+0x10d/0x690 ? __legitimize_path+0x28/0x60 smb2_queryfs+0x6a/0xf0 [cifs f90b72658819bd21c94769b6a652029a07a7172f] smb311_queryfs+0x12d/0x140 [cifs f90b72658819bd21c94769b6a652029a07a7172f] ? kmem_cache_alloc+0x18a/0x340 ? getname_flags+0x46/0x1e0 cifs_statfs+0x9f/...

In the Linux kernel, the following vulnerability has been resolved: bpf: Sync pending IRQ work before freeing ring buffer Fix a race where irq_work can be queued in bpf_ringbuf_commit() but the ring buffer is freed before the work executes. In the syzbot reproducer, a BPF program attached to sched_switch triggers bpf_ringbuf_commit(), queuing an irq_work. If the ring buffer is freed before this work executes, the irq_work thread may accesses freed memory. Calling `irq_work_sync(&rb->work)` ensures that all pending irq_work complete before freeing the buffer.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix race in hci_cmd_sync_dequeue_once hci_cmd_sync_dequeue_once() does lookup and then cancel the entry under two separate lock sections. Meanwhile, hci_cmd_sync_work() can also delete the same entry, leading to double list_del() and "UAF". Fix this by holding cmd_sync_work_lock across both lookup and cancel, so that the entry cannot be removed concurrently.

In the Linux kernel, the following vulnerability has been resolved: regmap: slimbus: fix bus_context pointer in regmap init calls Commit 4e65bda8273c ("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap. That commit breaks audio playback, for instance, on sdm845 Thundercomm Dragonboard 845c board: Unable to handle kernel paging request at virtual address ffff8000847cbad4 ... CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT Hardware name: Thundercomm Dragonboard 845c (DT) ... Call trace: slim_xfer_msg+0x24/0x1ac [slimbus] (P) slim_read+0x48/0x74 [slimbus] regmap_slimbus_read+0x18/0x24 [regmap_slimbus] _regmap_raw_read+0xe8/0x174 _regmap_bus_read+0x44/0x80 _regmap_read+0x60/0xd8 _regmap_update_bits+0xf4/0x140 _regmap_select_page+0xa8/0x124 _regmap_raw_write_impl+0x3b8/0x65c _regmap_bus_raw_write+0x60/0x80 _regmap_write+0x58/0xc0 regmap_write+0x4c/0x80 wcd934x_hw_params+0x494/0x8b8 [snd_s...

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix device use-after-free on unbind A recent change fixed device reference leaks when looking up drm platform device driver data during bind() but failed to remove a partial fix which had been added by commit 80805b62ea5b ("drm/mediatek: Fix kobject put for component sub-drivers"). This results in a reference imbalance on component bind() failures and on unbind() which could lead to a user-after-free. Make sure to only drop the references after retrieving the driver data by effectively reverting the previous partial fix. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix epfile null pointer access after ep enable. A race condition occurs when ffs_func_eps_enable() runs concurrently with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset() sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading to a NULL pointer dereference when accessing epfile->ep in ffs_func_eps_enable() after successful usb_ep_enable(). The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and ffs_data_close() functions, and its modification is protected by the spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function is also protected by ffs->eps_lock. Thus, add NULL pointer handling for ffs->epfiles in the ffs_func_eps_enable() function to fix issues

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: Use-after-free during failed initialization and exit of cdnsp gadget In the __cdnsp_gadget_init() and cdnsp_gadget_exit() functions, the gadget structure (pdev->gadget) was freed before its endpoints. The endpoints are linked via the ep_list in the gadget structure. Freeing the gadget first leaves dangling pointers in the endpoint list. When the endpoints are subsequently freed, this results in a use-after-free. Fix: By separating the usb_del_gadget_udc() operation into distinct "del" and "put" steps, cdnsp_gadget_free_endpoints() can be executed prior to the final release of the gadget structure with usb_put_gadget(). A patch similar to bb9c74a5bd14("usb: dwc3: gadget: Free gadget structure only after freeing endpoints").