In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_...

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. The issue was discovered by the drivers/net/xdp.py selftest, more specifically the test_xdp_native_tx_mb: - The mlx5 driver allocates a page_pool page and initializes it with a frag counter of 64 (pp_ref_count=64) and the internal frag counter to 0. - The test sends one packet with no payload. - On RX (mlx5e_skb_from_cqe_mpwrq_nonlinear()), mlx5 configures the XDP buffer with the packet data starting in the first frag...

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. Such issue can be observed with the test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of 3600 and shrinking by 256 bytes (an upcoming selftest patch): the last fragment gets released by the XDP code but doesn't get tracked by the driver. This results in a negative pp_ref_count during page release and the following splat: WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra...

In the Linux kernel, the following vulnerability has been resolved: rxrpc, afs: Fix missing error pointer check after rxrpc_kernel_lookup_peer() rxrpc_kernel_lookup_peer() can also return error pointers in addition to NULL, so just checking for NULL is not sufficient. Fix this by: (1) Changing rxrpc_kernel_lookup_peer() to return -ENOMEM rather than NULL on allocation failure. (2) Making the callers in afs use IS_ERR() and PTR_ERR() to pass on the error code returned.

In the Linux kernel, the following vulnerability has been resolved: net: spacemit: Fix error handling in emac_tx_mem_map() The DMA mappings were leaked on mapping error. Free them with the existing emac_free_tx_buf() function.

In the Linux kernel, the following vulnerability has been resolved: spi: amlogic: spifc-a4: Fix DMA mapping error handling Fix three bugs in aml_sfc_dma_buffer_setup() error paths: 1. Unnecessary goto: When the first DMA mapping (sfc->daddr) fails, nothing needs cleanup. Use direct return instead of goto. 2. Double-unmap bug: When info DMA mapping failed, the code would unmap sfc->daddr inline, then fall through to out_map_data which would unmap it again, causing a double-unmap. 3. Wrong unmap size: The out_map_info label used datalen instead of infolen when unmapping sfc->iaddr, which could lead to incorrect DMA sync behavior.

In the Linux kernel, the following vulnerability has been resolved: spi: rockchip-sfc: Fix double-free in remove() callback The driver uses devm_spi_register_controller() for registration, which automatically unregisters the controller via devm cleanup when the device is removed. The manual call to spi_unregister_controller() in the remove() callback can lead to a double-free. And to make sure controller is unregistered before DMA buffer is unmapped, switch to use spi_register_controller() in probe().

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-core: flush delayed work before removing DAIs and widgets When a sound card is unbound while a PCM stream is open, a use-after-free can occur in snd_soc_dapm_stream_event(), called from the close_delayed_work workqueue handler. During unbind, snd_soc_unbind_card() flushes delayed work and then calls soc_cleanup_card_resources(). Inside cleanup, snd_card_disconnect_sync() releases all PCM file descriptors, and the resulting PCM close path can call snd_soc_dapm_stream_stop() which schedules new delayed work with a pmdown_time timer delay. Since this happens after the flush in snd_soc_unbind_card(), the new work is not caught. soc_remove_link_components() then frees DAPM widgets before this work fires, leading to the use-after-free. The existing flush in soc_free_pcm_runtime() also cannot help as it runs after soc_remove_link_components() has already freed the widgets. Add a flush in soc_cleanup_card_resource...

In the Linux kernel, the following vulnerability has been resolved: serial: caif: hold tty->link reference in ldisc_open and ser_release A reproducer triggers a KASAN slab-use-after-free in pty_write_room() when caif_serial's TX path calls tty_write_room(). The faulting access is on tty->link->port. Hold an extra kref on tty->link for the lifetime of the caif_serial line discipline: get it in ldisc_open() and drop it in ser_release(), and also drop it on the ldisc_open() error path. With this change applied, the reproducer no longer triggers the UAF in my testing.

In the Linux kernel, the following vulnerability has been resolved: mctp: i2c: fix skb memory leak in receive path When 'midev->allow_rx' is false, the newly allocated skb isn't consumed by netif_rx(), it needs to free the skb directly.

In the Linux kernel, the following vulnerability has been resolved: bonding: fix type confusion in bond_setup_by_slave() kernel BUG at net/core/skbuff.c:2306! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306 RSP: 0018:ffffc90004aff760 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900 RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000 R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780 R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0 Call Trace: <TASK> ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900 dev_hard_header include/linux/netdevice.h:3439 [inline] packet_snd net/packet/af_packet.c:3028 [inline] packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108 sock_sendmsg...

In the Linux kernel, the following vulnerability has been resolved: mctp: route: hold key->lock in mctp_flow_prepare_output() mctp_flow_prepare_output() checks key->dev and may call mctp_dev_set_key(), but it does not hold key->lock while doing so. mctp_dev_set_key() and mctp_dev_release_key() are annotated with __must_hold(&key->lock), so key->dev access is intended to be serialized by key->lock. The mctp_sendmsg() transmit path reaches mctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output() without holding key->lock, so the check-and-set sequence is racy. Example interleaving: CPU0 CPU1 ---- ---- mctp_flow_prepare_output(key, devA) if (!key->dev) // sees NULL mctp_flow_prepare_output( key, devB) if (!key->dev) // still NULL mctp_dev_set_key(devB, key) mctp_dev_hold(devB) key->dev = devB mctp_dev_set_key(devA, key) mctp_dev_hold(devA) key->dev = devA // overwrites devB Now both devA and devB refer...

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix for duplicate device in netdev hooks When handling NETDEV_REGISTER notification, duplicate device registration must be avoided since the device may have been added by nft_netdev_hook_alloc() already when creating the hook.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: fix stack out-of-bounds read in pipapo_drop() pipapo_drop() passes rulemap[i + 1].n to pipapo_unmap() as the to_offset argument on every iteration, including the last one where i == m->field_count - 1. This reads one element past the end of the stack-allocated rulemap array (declared as rulemap[NFT_PIPAPO_MAX_FIELDS] with NFT_PIPAPO_MAX_FIELDS == 16). Although pipapo_unmap() returns early when is_last is true without using the to_offset value, the argument is evaluated at the call site before the function body executes, making this a genuine out-of-bounds stack read confirmed by KASAN: BUG: KASAN: stack-out-of-bounds in pipapo_drop+0x50c/0x57c [nf_tables] Read of size 4 at addr ffff8000810e71a4 This frame has 1 object: [32, 160) 'rulemap' The buggy address is at offset 164 -- exactly 4 bytes past the end of the rulemap array. Pass 0 instead of rulemap[i + 1].n on the last iteration to avoi...

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: guard option walkers against 1-byte tail reads When the last byte of options is a non-single-byte option kind, walkers that advance with i += op[i + 1] ? : 1 can read op[i + 1] past the end of the option area. Add an explicit i == optlen - 1 check before dereferencing op[i + 1] in xt_tcpudp and xt_dccp option walkers.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: fix entry leak in bridge verdict error path nfqnl_recv_verdict() calls find_dequeue_entry() to remove the queue entry from the queue data structures, taking ownership of the entry. For PF_BRIDGE packets, it then calls nfqa_parse_bridge() to parse VLAN attributes. If nfqa_parse_bridge() returns an error (e.g. NFQA_VLAN present but NFQA_VLAN_TCI missing), the function returns immediately without freeing the dequeued entry or its sk_buff. This leaks the nf_queue_entry, its associated sk_buff, and all held references (net_device refcounts, struct net refcount). Repeated triggering exhausts kernel memory. Fix this by dropping the entry via nfqnl_reinject() with NF_DROP verdict on the error path, consistent with other error handling in this file.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table() nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a label inside the for loop body. When the "last" helper saved in cb->args[1] is deleted between dump rounds, every entry fails the (cur != last) check, so cb->args[1] is never cleared. The for loop finishes with cb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps back into the loop body bypassing the bounds check, causing an 8-byte out-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize]. The 'goto restart' block was meant to re-traverse the current bucket when "last" is no longer found, but it was placed after the for loop instead of inside it. Move the block into the for loop body so that the restart only occurs while cb->args[0] is still within bounds. BUG: KASAN: slab-out-of-bounds in nfnl_cthelper_dump_table+0x9f/0x1b0 Read of size 8 at addr ffff888104ca3000 ...

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set dev->online_queues is a count incremented in nvme_init_queue. Thus, valid indices are 0 through dev->online_queues − 1. This patch fixes the loop condition to ensure the index stays within the valid range. Index 0 is excluded because it is the admin queue. KASAN splat: ================================================================== BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 Read of size 2 at addr ffff88800592a574 by task kworker/u8:5/74 CPU: 0 UID: 0 PID: 74 Comm: kworker/u8:5 Not tainted 6.19.0-dirty #10 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: nvme-reset-wq nvme_reset_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [...

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix race bug in nvme_poll_irqdisable() In the following scenario, pdev can be disabled between (1) and (3) by (2). This sets pdev->msix_enabled = 0. Then, pci_irq_vector() will return MSI-X IRQ(>15) for (1) whereas return INTx IRQ(<=15) for (2). This causes IRQ warning because it tries to enable INTx IRQ that has never been disabled before. To fix this, save IRQ number into a local variable and ensure disable_irq() and enable_irq() operate on the same IRQ number. Even if pci_free_irq_vectors() frees the IRQ concurrently, disable_irq() and enable_irq() on a stale IRQ number is still valid and safe, and the depth accounting reamins balanced. task 1: nvme_poll_irqdisable() disable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(1) enable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(3) task 2: nvme_reset_work() nvme_dev_disable() pdev->msix_enable = 0; ...(2) crash log: ------------[ cut here ]----------...

In the Linux kernel, the following vulnerability has been resolved: iavf: fix PTP use-after-free during reset Commit 7c01dbfc8a1c5f ("iavf: periodically cache PHC time") introduced a worker to cache PHC time, but failed to stop it during reset or disable. This creates a race condition where `iavf_reset_task()` or `iavf_disable_vf()` free adapter resources (AQ) while the worker is still running. If the worker triggers `iavf_queue_ptp_cmd()` during teardown, it accesses freed memory/locks, leading to a crash. Fix this by calling `iavf_ptp_release()` before tearing down the adapter. This ensures `ptp_clock_unregister()` synchronously cancels the worker and cleans up the chardev before the backing resources are destroyed.