In the Linux kernel, the following vulnerability has been resolved: libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo() Since commit 1e7ab6f67824 ("anon_inode: rework assertions"), path_noexec() warns when an anonymous-inode file is mmap'd from a superblock that has not set SB_I_NOEXEC. dma-buf backs its files this way and never set the flag, so mmap of any exported buffer trips the warning on a CONFIG_DEBUG_VFS=y kernel: WARNING: CPU: 11 PID: 121813 at fs/exec.c:118 path_noexec+0x47/0x50 do_mmap+0x2b5/0x680 vm_mmap_pgoff+0x129/0x210 ksys_mmap_pgoff+0x177/0x240 __x64_sys_mmap+0x33/0x70 init_pseudo() sets up internal SB_NOUSER mounts that are never path-reachable. Set both flags here so every pseudo filesystem gets them by default instead of each caller setting them. SB_I_NODEV is inert for unreachable mounts. SB_I_NOEXEC has one visible effect: an executable mapping of a pseudo-fs fd, such as a dma-buf, now fails with -EPERM, which is the invariant the

In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go: cancel cfg_setup work in hid_go_cfg_remove() hid_go_cfg_probe() initialises drvdata.go_cfg_setup and schedules it to run 2 ms later: INIT_DELAYED_WORK(&drvdata.go_cfg_setup, &cfg_setup); schedule_delayed_work(&drvdata.go_cfg_setup, msecs_to_jiffies(2)); cfg_setup() dereferences drvdata.hdev to issue MCU command requests. hid_go_cfg_remove() tears down sysfs and stops the HID device, but never drains the delayed work. If the device is unbound within the 2 ms scheduling delay (a probe failure rolling back via remove, or a fast rmmod after probe), the work fires after hid_destroy_device() has dropped its reference and released the underlying hdev struct, leaving cfg_setup() with a stale drvdata.hdev pointer. Mirror the sibling driver hid-lenovo-go-s.c, whose hid_gos_cfg_remove() already calls cancel_delayed_work_sync() on its analogous work, and drain go_cfg_setup at the top of hid_go_cfg

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: initialize reset_work at allocation time ffs_fs_kill_sb() unconditionally calls cancel_work_sync() on ffs->reset_work when a functionfs instance is unmounted: ffs_data_reset(ffs); cancel_work_sync(&ffs->reset_work); However ffs->reset_work is only ever initialized via INIT_WORK() in ffs_func_set_alt() and ffs_func_disable(), and only on the FFS_DEACTIVATED path. That state is reached solely by ffs_data_closed() when the instance is mounted with the "no_disconnect" option, so for the common case (no "no_disconnect", or mounted and unmounted without ever being deactivated) reset_work is never initialized. ffs_data_new() allocates the ffs_data with kzalloc_obj() and does not initialize reset_work, and ffs_data_reset()/ffs_data_clear() do not touch it either, so reset_work.func is left NULL. cancel_work_sync() on such a work then trips the WARN_ON(!work->func) guard in __flush_work(): WARNING:

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not trim a device which is not writeable [BUG] There is a bug report that btrfs/242 can randomly fail with the following NULL pointer dereference: run fstests btrfs/242 at 2026-06-01 10:25:08 BTRFS: device fsid d4d7f234-487c-4787-88e4-47a8b68c9874 devid 1 transid 9 /dev/sdc (8:32) scanned by mount (122609) BTRFS info (device sdc): first mount of filesystem d4d7f234-487c-4787-88e4-47a8b68c9874 BTRFS info (device sdc): using crc32c checksum algorithm BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS info (device sdc): allowing degraded mounts BTRFS info (device sdc): turning on async discard BTRFS info (device sdc): enabling free space tree Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 user pgtable: 4k pages, 48-bit

In the Linux kernel, the following vulnerability has been resolved: riscv: mm: Unconditionally sfence.vma for spurious fault Svvptc does not guarantee that it's safe to just return here. Since we have already cleared our bit, if, theoretically, the bounded timeframe for the accessed page to become valid still hasn't happened after sret, we could fault again and actually crash. Hopefully, these spurious faults should be rare enough that this is an acceptable slowdown.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid WARNING in sva unbind path The Intel IOMMU driver allows SVA on devices even if they do not support PCI/PRI. Commit 39c20c4e83b9 ("iommu/vt-d: Only handle IOPF for SVA when PRI is supported") modified the SVA bind path to allow this configuration by skipping IOPF enablement when PRI is missing. However, it failed to update the unbind path. This creates an imbalance: the unbind path attempts to disable IOPF for a device that never had it enabled, triggering a WARNING in intel_iommu_disable_iopf(): WARNING: drivers/iommu/intel/iommu.c:3475 at intel_iommu_disable_iopf+0x4f/0x90d Call Trace: <TASK> blocking_domain_set_dev_pasid+0x50/0x70 iommu_detach_device_pasid+0x89/0xc0 iommu_sva_unbind_device+0x73/0x150 xe_vm_close_and_put+0x4d2/0x1200 [xe] Fix this by bypassing IOPF operations for SVA domains on non-PRI hardware in both the bind and unbind paths.

In the Linux kernel, the following vulnerability has been resolved: dma-buf/udmabuf: skip redundant cpu sync to fix cacheline EEXIST warning When CONFIG_DMA_API_DEBUG_SG is enabled, importing a udmabuf into a DRM driver (e.g. amdgpu for video playback in GNOME Videos / Showtime) triggers a spurious warning: DMA-API: amdgpu 0000:03:00.0: cacheline tracking EEXIST, \ overlapping mappings aren't supported WARNING: kernel/dma/debug.c:619 at add_dma_entry+0x473/0x5f0 The call chain is: amdgpu_cs_ioctl -> amdgpu_ttm_backend_bind -> dma_buf_map_attachment -> [udmabuf] map_udmabuf -> get_sg_table -> dma_map_sgtable(dev, sg, direction, 0) // attrs=0 -> debug_dma_map_sg -> add_dma_entry -> EEXIST This happens because udmabuf builds a per-page scatter-gather list via sg_set_folio(). When begin_cpu_udmabuf() has already created an sg table mapped for the misc device, and an importer such as amdgpu maps the same pages for its own device via map_udmabuf()

Missing cryptographic step in Caliptra Core Firmware (aes_256_gcm_update module) results in an incorrect GCM authentication tag. When the streaming AES-256-GCM API is used with empty AAD, the hardware GHASH accumulator state is not saved after the first update call, causing the final tag to exclude the first batch of processed ciphertext. Ciphertext produced by that call may be modified without the tag reflecting the change. This issue affects Core Runtime Firmware: from 2.0.0 through 2.0.1, 2.1.0.

In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix NULL-deref on adapter registration failure If adapter registration ever fails the release callback would trigger a NULL-pointer dereference as the completion struct has not been initialised. Note that before the offending commit this would instead have resulted in a minor memory leak of the adapter name.

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix data races on ring->ready On weakly-ordered architectures, the store to fiq->ops can be reordered past the store to ring->ready, allowing a CPU that sees ring->ready == true via fuse_uring_ready() to dispatch requests through a stale fiq->ops pointer. Upgrade the store to smp_store_release() and the load in fuse_uring_ready() to smp_load_acquire() so that the preceding WRITE_ONCE(fiq->ops, ...) is visible to any CPU that observes ring->ready == true. Additionally, fuse_uring_do_register() publishes ring->ready with WRITE_ONCE() but the fast-path check reads it with a plain load. This is a marked-vs-unmarked access that KCSAN will flag. Wrap it in READ_ONCE() to mark it without adding unnecessary ordering. Also wrap the fc->ring load in fuse_uring_ready() in READ_ONCE() to prevent the compiler from reloading it between the NULL check and the dereference.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: arc: emac: quiesce interrupts before requesting IRQ Normal RX/TX interrupts are enabled later, in arc_emac_open(), so probe should not see interrupt delivery in the usual case. However, hardware may still present stale or latched interrupt status left by firmware or the bootloader. If probe later unwinds after devm_request_irq() has installed the handler, such a stale interrupt can still reach arc_emac_intr() during teardown and race with release of the associated net_device. Avoid that window by putting the device into a known quiescent state before requesting the IRQ: disable all EMAC interrupt sources and clear any pending EMAC interrupt status bits. This keeps the change hardware-focused and minimal, while preventing spurious IRQ delivery from leftover state.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: drain bus_reset work on device removal brcmf_fw_crashed() and the debugfs "reset" entry both schedule drvr->bus_reset, whose callback recovers drvr through container_of() and dereferences it. The removal path frees drvr (brcmf_free -> wiphy_free) without draining the work, so a bus_reset callback pending or running during removal can outlive drvr. Cancellation cannot live in brcmf_detach() or brcmf_free(): the work callback reaches teardown through the bus .reset op (PCIe brcmf_pcie_reset -> brcmf_detach; SDIO brcmf_sdio_bus_reset -> brcmf_sdiod_remove -> brcmf_free), so cancelling there would wait for the running work and deadlock. Add a per-bus mutex (bus_reset_lock) and route all arming through brcmf_bus_schedule_reset(), which under the lock skips when the bus is marked removing. Each bus remove entry calls brcmf_bus_cancel_reset_work(), which under the same lock sets removing and cancels the

In the Linux kernel, the following vulnerability has been resolved: can: esd_usb: kill anchored URBs before freeing netdevs esd_usb_disconnect() frees each CAN netdev with free_candev() inside its per-netdev loop and only calls unlink_all_urbs(dev) afterwards. The per-netdev private data (struct esd_usb_net_priv) is embedded in the net_device allocation returned by alloc_candev(), so once free_candev() has run, dev->nets[i] points to freed memory. unlink_all_urbs() then dereferences the freed dev->nets[i] to kill the per-netdev TX anchor (usb_kill_anchored_urbs(&priv->tx_submitted)), clear active_tx_jobs, and reset priv->tx_contexts[]. Reorder the teardown so the anchored URBs are killed before the netdevs are freed, matching other CAN/USB drivers in the same directory such as ems_usb, usb_8dev and mcba_usb, which unregister, then unlink, then free: unregister the netdevs first (which stops their TX queues), call unlink_all_urbs(dev) once, then free the netdevs. This issue was foun

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: cancel pending IN work before freeing the midi object The f_midi driver embeds a work item (midi->work) whose handler, f_midi_in_work(), dereferences the enclosing struct f_midi through container_of(). This work is armed from two sites: f_midi_complete(), on a normal IN-endpoint completion, and f_midi_in_trigger(), on an ALSA rawmidi output-stream start. Neither f_midi_disable() nor f_midi_unbind() cancels midi->work. f_midi_disable() only disables the endpoints and drains the in_req_fifo; it does not synchronize the work item, and the sound card is released asynchronously to the final free of the midi object. The midi object is reference-counted (midi->free_ref) and is freed in f_midi_free() only once both the usb_function reference and the rawmidi private_data reference have been dropped. In f_midi_unbind(), f_midi_disable() runs before the sound card is released, so while the USB endpoints

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: bdc: free IRQ and drain func_wake_notify before teardown The Broadcom BDC UDC driver registers its IRQ handler with devm_request_irq() in bdc_udc_init(), so the IRQ is released by devm only after bdc_remove() returns. devm releases resources in reverse LIFO order, but bdc_remove() runs bdc_udc_exit() and bdc_hw_exit() -> bdc_mem_free() manually before returning: bdc_udc_exit() tears down individual endpoint objects via bdc_free_ep(), while bdc_hw_exit() -> bdc_mem_free() frees and NULLs the DMA-coherent status-report ring (bdc->srr.sr_bds) and kfree()s bdc->bdc_ep_array. Both happen while the IRQ handler (bdc_udc_interrupt, requested with IRQF_SHARED) remains deliverable in the window up to the post-remove devm free_irq(). On receipt of a shared interrupt in that window, bdc_udc_interrupt() dereferences bdc->srr.sr_bds[bdc->srr.dqp_index] (NULL or freed DMA) and dispatches sr_handler callbacks th

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix a use-after-free problem in rxe_mmap rxe_mmap() removes a rxe_mmap_info struct from the pending_mmaps list and releases pending_lock while the struct's kref is still at 1: list_del_init(&ip->pending_mmaps); spin_unlock_bh(&rxe->pending_lock); /* ref == 1, no lock held */ ret = remap_vmalloc_range(vma, ip->obj, 0); /* walks PTEs */ [...] rxe_vma_open(vma); /* kref_get, ref → 2 */ remap_vmalloc_range_partial() walks PTEs without any lock. A concurrent DESTROY_CQ ioctl on another CPU calls: kref_put(&q->ip->ref, rxe_mmap_release) /* ref 1→0 */ vfree(ip->obj) /* clears vmalloc PTEs mid-walk */ kfree(ip) /* frees rxe_mmap_info */ This yields: 1. Kernel crash, vmalloc_to_page() returns NULL when vfree wins the per-PTE race -> vm_insert_page(NULL) → GPF in validate_page_before_insert 2. Page UAF, vmalloc_to_page() reads a stale

In the Linux kernel, the following vulnerability has been resolved: xfrm: fix sk_dst_cache double-free in xfrm_user_policy() xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(), i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with rcu_dereference_protected(), stores NULL and dst_release()s the old dst. That is only safe if no other thread modifies sk_dst_cache concurrently. For a connected UDP socket that does not hold: the transmit fast path (udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly with an atomic xchg(). A per-socket policy change racing a send can make both sides observe the same old dst and each dst_release() it, dropping the socket's single reference twice and freeing the xfrm_dst bundle while it is still referenced: BUG: KASAN: slab-use-after-free in dst_release Write of size 4 at addr ffff88801897b6c0 by task exploit/155 Call Trace: ... dst_release (... ./include/linux/rcuref.h:109) xfrm_user_p

In the Linux kernel, the following vulnerability has been resolved: xfrm6: clear dst.dev on error to avoid double netdev_put in xfrm6_fill_dst() On the error path where in6_dev_get(dev) returns NULL, xfrm6_fill_dst() releases the device reference with netdev_put() but leaves xdst->u.dst.dev set. dst_destroy() later calls netdev_put(dst->dev) again, so the same net_device reference is released twice, underflowing its refcount (ref_tracker WARNING + "unregister_netdevice: waiting for <dev> to become free"). Clear xdst->u.dst.dev after the netdev_put(), the same way the XFRM device-offload paths xfrm_dev_state_add() and xfrm_dev_policy_add() in net/xfrm/xfrm_device.c NULL ->dev when releasing the reference on error. ref_tracker: reference already released. ref_tracker: allocated in: xfrm6_fill_dst (net/ipv6/xfrm6_policy.c:86) ... udpv6_sendmsg (net/ipv6/udp.c:1696) ... ref_tracker: freed in: xfrm6_fill_dst (net/ipv6/xfrm6_policy.c:90) ... WARNING: lib/ref_tra

The Geo Mashup plugin for WordPress is vulnerable to time-based blind SQL Injection via the 'geo_mashup_null_fields' parameter in all versions up to, and including, 1.13.19 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert xfrm_hash_rebuild()'s first loop preallocates the bins/chains the reinsert loop needs, so the reinsert (after hlist_del_rcu()) cannot allocate or fail. But its guard is inverted: it skips policies with prefixlen < threshold and preallocates for the rest. prefixlen < threshold is exactly when policy_hash_bysel() returns NULL and the reinsert takes the allocating xfrm_policy_inexact_insert() path. So the loop preallocates for the exact policies (which never allocate) and skips the inexact ones, whose bin/node is then allocated GFP_ATOMIC during reinsert. On failure the error path only WARN_ONCE()s and continues, leaving a poisoned bydst node; the next rebuild's hlist_del_rcu() dereferences LIST_POISON2 and takes a GPF. Reachable under memory pressure, deterministic via failslab. Invert the guard so preallocation covers exactly the reinserted pol