In the Linux kernel, the following vulnerability has been resolved: net: ipa: fix event ring index not programmed for IPA v5.0+ For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 to CH_C_CNTXT_1. The v5.0 register definition intended to define this field in the CH_C_CNTXT_1 fmask array but used the old identifier of ERINDEX instead of CH_ERINDEX. Without a valid event ring, GSI channels could never signal transfer completions. This caused gsi_channel_trans_quiesce() to block forever in wait_for_completion(). At least for IPA v5.2 this resolves an issue seen where runtime suspend, system suspend, and remoteproc stop all hanged forever. It also meant the IPA data path was completely non functional.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix die ID init and look up bugs In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path, uncore_device_to_die() may return -1 when all CPUs associated with the UBOX device are offline. Remove the WARN_ON_ONCE(die_id == -1) check for two reasons: - The current code breaks out of the loop. This is incorrect because pci_get_device() does not guarantee iteration in domain or bus order, so additional UBOX devices may be skipped during the scan. - Returning -EINVAL is incorrect, since marking offline buses with die_id == -1 is expected and should not be treated as an error. Separately, when NUMA is disabled on a NUMA-capable platform, pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die() to return -1 for all PCI devices. As a result, spr_update_device_location(), used on Intel SPR and EMR, ignores the corresponding PMON units and does not add them to the RB tree. Fix this by using...

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix unbalanced refcnt in geth_free geth_alloc() increments the reference count, but geth_free() fails to decrement it. This prevents the configuration of attributes via configfs after unlinking the function. Decrement the reference count in geth_free() to ensure proper cleanup.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Protect RNDIS options with mutex The class/subclass/protocol options are suspectible to race conditions as they can be accessed concurrently through configfs. Use existing mutex to protect these options. This issue was identified during code inspection.

In the Linux kernel, the following vulnerability has been resolved: net/ipv6: ioam6: prevent schema length wraparound in trace fill ioam6_fill_trace_data() stores the schema contribution to the trace length in a u8. With bit 22 enabled and the largest schema payload, sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the remaining-space check. __ioam6_fill_trace_data() then positions the write cursor without reserving the schema area but still copies the 4-byte schema header and the full schema payload, overrunning the trace buffer. Keep sclen in an unsigned int so the remaining-space check and the write cursor calculation both see the full schema length.

In the Linux kernel, the following vulnerability has been resolved: comedi: Reinit dev->spinlock between attachments to low-level drivers `struct comedi_device` is the main controlling structure for a COMEDI device created by the COMEDI subsystem. It contains a member `spinlock` containing a spin-lock that is initialized by the COMEDI subsystem, but is reserved for use by a low-level driver attached to the COMEDI device (at least since commit 25436dc9d84f ("Staging: comedi: remove RT code")). Some COMEDI devices (those created on initialization of the COMEDI subsystem when the "comedi.comedi_num_legacy_minors" parameter is non-zero) can be attached to different low-level drivers over their lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in inconsistent lock states being reported when there is a mismatch in the spin-lock locking levels used by each low-level driver to which the COMEDI device has been attached. Fix it by reinitializing `dev->spinlock` before ca...

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible UaF in addrconf_permanent_addr() The mentioned helper try to warn the user about an exceptional condition, but the message is delivered too late, accessing the ipv6 after its possible deletion. Reorder the statement to avoid the possible UaF; while at it, place the warning outside the idev->lock as it needs no protection.

In the Linux kernel, the following vulnerability has been resolved: btrfs: reserve enough transaction items for qgroup ioctls Currently our qgroup ioctls don't reserve any space, they just do a transaction join, which does not reserve any space, neither for the quota tree updates nor for the delayed refs generated when updating the quota tree. The quota root uses the global block reserve, which is fine most of the time since we don't expect a lot of updates to the quota root, or to be too close to -ENOSPC such that other critical metadata updates need to resort to the global reserve. However this is not optimal, as not reserving proper space may result in a transaction abort due to not reserving space for delayed refs and then abusing the use of the global block reserve. For example, the following reproducer (which is unlikely to model any real world use case, but just to illustrate the problem), triggers such a transaction abort due to -ENOSPC when running delayed refs: $ cat test....

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference in dcn401_init_hw() dcn401_init_hw() assumes that update_bw_bounding_box() is valid when entering the update path. However, the existing condition: ((!fams2_enable && update_bw_bounding_box) || freq_changed) does not guarantee this, as the freq_changed branch can evaluate to true independently of the callback pointer. This can result in calling update_bw_bounding_box() when it is NULL. Fix this by separating the update condition from the pointer checks and ensuring the callback, dc->clk_mgr, and bw_params are validated before use. Fixes the below: ../dc/hwss/dcn401/dcn401_hwseq.c:367 dcn401_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 362) (cherry picked from commit 86117c5ab42f21562fedb0a64bffea3ee5fcd477)

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: chacha: Zeroize permuted_state before it leaves scope Since the ChaCha permutation is invertible, the local variable 'permuted_state' is sufficient to compute the original 'state', and thus the key, even after the permutation has been done. While the kernel is quite inconsistent about zeroizing secrets on the stack (and some prominent userspace crypto libraries don't bother at all since it's not guaranteed to work anyway), the kernel does try to do it as a best practice, especially in cases involving the RNG. Thus, explicitly zeroize 'permuted_state' before it goes out of scope.

In the Linux kernel, the following vulnerability has been resolved: interconnect: qcom: sm8450: Fix NULL pointer dereference in icc_link_nodes() The change to dynamic IDs for SM8450 platform interconnects left two links unconverted, fix it to avoid the NULL pointer dereference in runtime, when a pointer to a destination interconnect is not valid: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 <...> Call trace: icc_link_nodes+0x3c/0x100 (P) qcom_icc_rpmh_probe+0x1b4/0x528 platform_probe+0x64/0xc0 really_probe+0xc4/0x2a8 __driver_probe_device+0x80/0x140 driver_probe_device+0x48/0x170 __device_attach_driver+0xc0/0x148 bus_for_each_drv+0x88/0xf0 __device_attach+0xb0/0x1c0 device_initial_probe+0x58/0x68 bus_probe_device+0x40/0xb8 deferred_probe_work_func+0x90/0xd0 process_one_work+0x15c/0x3c0 worker_thread+0x2e8/0x400 kthread+0x150/0x208 ret_from_fork+0x10/0x20 Code: 900310f4 911d6294 91008280 94176078 (f94002a0) ---[ end trace 0000000000000000 ]--- ...

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: force responder MITM requirements before building the pairing response smp_cmd_pairing_req() currently builds the pairing response from the initiator auth_req before enforcing the local BT_SECURITY_HIGH requirement. If the initiator omits SMP_AUTH_MITM, the response can also omit it even though the local side still requires MITM. tk_request() then sees an auth value without SMP_AUTH_MITM and may select JUST_CFM, making method selection inconsistent with the pairing policy the responder already enforces. When the local side requires HIGH security, first verify that MITM can be achieved from the IO capabilities and then force SMP_AUTH_MITM in the response in both rsp.auth_req and auth. This keeps the responder auth bits and later method selection aligned.

In the Linux kernel, the following vulnerability has been resolved: bpf: reject direct access to nullable PTR_TO_BUF pointers check_mem_access() matches PTR_TO_BUF via base_type() which strips PTR_MAYBE_NULL, allowing direct dereference without a null check. Map iterator ctx->key and ctx->value are PTR_TO_BUF | PTR_MAYBE_NULL. On stop callbacks these are NULL, causing a kernel NULL dereference. Add a type_may_be_null() guard to the PTR_TO_BUF branch, matching the existing PTR_TO_BTF_ID pattern.

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone device registration error path If thermal_zone_device_register_with_trips() fails after registering a thermal zone device, it needs to wait for the tz->removal completion like thermal_zone_device_unregister(), in case user space has managed to take a reference to the thermal zone device's kobject, in which case thermal_release() may not be called by the error path itself and tz may be freed prematurely. Add the missing wait_for_completion() call to the thermal zone device registration error path.

In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Disable KCOV instrumentation after load_segments() The load_segments() function changes segment registers, invalidating GS base (which KCOV relies on for per-cpu data). When CONFIG_KCOV is enabled, any subsequent instrumented C code call (e.g. native_gdt_invalidate()) begins crashing the kernel in an endless loop. To reproduce the problem, it's sufficient to do kexec on a KCOV-instrumented kernel: $ kexec -l /boot/otherKernel $ kexec -e The real-world context for this problem is enabling crash dump collection in syzkaller. For this, the tool loads a panic kernel before fuzzing and then calls makedumpfile after the panic. This workflow requires both CONFIG_KEXEC and CONFIG_KCOV to be enabled simultaneously. Adding safeguards directly to the KCOV fast-path (__sanitizer_cov_trace_pc()) is also undesirable as it would introduce an extra performance overhead. Disabling instrumentation for the individual functi...

In the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix overflow on long hmac keys When a key longer than block size is supplied, it is copied and then hashed into the real key. The memory allocated for the copy needs to be rounded to DMA cache alignment, as otherwise the hashed key may corrupt neighbouring memory. The copying is performed using kmemdup, however this leads to an overflow: reading more bytes (aligned_len - keylen) from the keylen source buffer. Fix this by replacing kmemdup with kmalloc, followed by memcpy.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error path When kobject_init_and_add() fails, cpufreq_dbs_governor_init() calls kobject_put(&dbs_data->attr_set.kobj). The kobject release callback cpufreq_dbs_data_release() calls gov->exit(dbs_data) and kfree(dbs_data), but the current error path then calls gov->exit(dbs_data) and kfree(dbs_data) again, causing a double free. Keep the direct kfree(dbs_data) for the gov->init() failure path, but after kobject_init_and_add() has been called, let kobject_put() handle the cleanup through cpufreq_dbs_data_release().

In the Linux kernel, the following vulnerability has been resolved: USB: dummy-hcd: Fix locking/synchronization error Syzbot testing was able to provoke an addressing exception and crash in the usb_gadget_udc_reset() routine in drivers/usb/gadgets/udc/core.c, resulting from the fact that the routine was called with a second ("driver") argument of NULL. The bad caller was set_link_state() in dummy_hcd.c, and the problem arose because of a race between a USB reset and driver unbind. These sorts of races were not supposed to be possible; commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"), along with a few followup commits, was written specifically to prevent them. As it turns out, there are (at least) two errors remaining in the code. Another patch will address the second error; this one is concerned with the first. The error responsible for the syzbot crash occurred because the stop_activity() routine will sometimes drop and then re-acquire the dum->lock s...

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix SCX_KICK_WAIT deadlock by deferring wait to balance callback SCX_KICK_WAIT busy-waits in kick_cpus_irq_workfn() using smp_cond_load_acquire() until the target CPU's kick_sync advances. Because the irq_work runs in hardirq context, the waiting CPU cannot reschedule and its own kick_sync never advances. If multiple CPUs form a wait cycle, all CPUs deadlock. Replace the busy-wait in kick_cpus_irq_workfn() with resched_curr() to force the CPU through do_pick_task_scx(), which queues a balance callback to perform the wait. The balance callback drops the rq lock and enables IRQs following the sched_core_balance() pattern, so the CPU can process IPIs while waiting. The local CPU's kick_sync is advanced on entry to do_pick_task_scx() and continuously during the wait, ensuring any CPU that starts waiting for us sees the advancement and cannot form cyclic dependencies.