In the Linux kernel, the following vulnerability has been resolved: xfs: close crash window in attr dabtree inactivation When inactivating an inode with node-format extended attributes, xfs_attr3_node_inactive() invalidates all child leaf/node blocks via xfs_trans_binval(), but intentionally does not remove the corresponding entries from their parent node blocks. The implicit assumption is that xfs_attr_inactive() will truncate the entire attr fork to zero extents afterwards, so log recovery will never reach the root node and follow those stale pointers. However, if a log shutdown occurs after the leaf/node block cancellations commit but before the attr bmap truncation commits, this assumption breaks. Recovery replays the attr bmap intact (the inode still has attr fork extents), but suppresses replay of all cancelled leaf/node blocks, maybe leaving them as stale data on disk. On the next mount, xlog_recover_process_iunlinks() retries inactivation and attempts to read the root nod...

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check tdls flag in ieee80211_tdls_oper When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the station exists but not whether it is actually a TDLS station. This allows the operation to proceed for non-TDLS stations, causing unintended side effects like modifying channel context and HT protection before failing. Add a check for sta->sta.tdls early in the ENABLE_LINK case, before any side effects occur, to ensure the operation is only allowed for actual TDLS peers.

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq The wacom_intuos_bt_irq() function processes Bluetooth HID reports without sufficient bounds checking. A maliciously crafted short report can trigger an out-of-bounds read when copying data into the wacom structure. Specifically, report 0x03 requires at least 22 bytes to safely read the processed data and battery status, while report 0x04 (which falls through to 0x03) requires 32 bytes. Add explicit length checks for these report IDs and log a warning if a short report is received.

In the Linux kernel, the following vulnerability has been resolved: atm: lec: fix use-after-free in sock_def_readable() A race condition exists between lec_atm_close() setting priv->lecd to NULL and concurrent access to priv->lecd in send_to_lecd(), lec_handle_bridge(), and lec_atm_send(). When the socket is freed via RCU while another thread is still using it, a use-after-free occurs in sock_def_readable() when accessing the socket's wait queue. The root cause is that lec_atm_close() clears priv->lecd without any synchronization, while callers dereference priv->lecd without any protection against concurrent teardown. Fix this by converting priv->lecd to an RCU-protected pointer: - Mark priv->lecd as __rcu in lec.h - Use rcu_assign_pointer() in lec_atm_close() and lecd_attach() for safe pointer assignment - Use rcu_access_pointer() for NULL checks that do not dereference the pointer in lec_start_xmit(), lec_push(), send_to_lecd() and lecd_attach() - Use rcu_read_lock/rcu_dereference...

In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure Presently, if the force feedback initialisation fails when probing the Logitech G920 Driving Force Racing Wheel for Xbox One, an error number will be returned and propagated before the userspace infrastructure (sysfs and /dev/input) has been torn down. If userspace ignores the errors and continues to use its references to these dangling entities, a UAF will promptly follow. We have 2 options; continue to return the error, but ensure that all of the infrastructure is torn down accordingly or continue to treat this condition as a warning by emitting the message but returning success. It is thought that the original author's intention was to emit the warning but keep the device functional, less the force feedback feature, so let's go with that.

In the Linux kernel, the following vulnerability has been resolved: HID: core: Mitigate potential OOB by removing bogus memset() The memset() in hid_report_raw_event() has the good intention of clearing out bogus data by zeroing the area from the end of the incoming data string to the assumed end of the buffer. However, as we have previously seen, doing so can easily result in OOB reads and writes in the subsequent thread of execution. The current suggestion from one of the HID maintainers is to remove the memset() and simply return if the incoming event buffer size is not large enough to fill the associated report. Suggested-by Benjamin Tissoires <bentiss@kernel.org> [bentiss: changed the return value]

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Check to ensure report responses match the request It is possible for a malicious (or clumsy) device to respond to a specific report's feature request using a completely different report ID. This can cause confusion in the HID core resulting in nasty side-effects such as OOB writes. Add a check to ensure that the report ID in the response, matches the one that was requested. If it doesn't, omit reporting the raw event and return early.

In the Linux kernel, the following vulnerability has been resolved: btrfs: reject root items with drop_progress and zero drop_level [BUG] When recovering relocation at mount time, merge_reloc_root() and btrfs_drop_snapshot() both use BUG_ON(level == 0) to guard against an impossible state: a non-zero drop_progress combined with a zero drop_level in a root_item, which can be triggered: ------------[ cut here ]------------ kernel BUG at fs/btrfs/relocation.c:1545! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 283 ... Tainted: 6.18.0+ #16 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Ubuntu 24.04 PC v2, BIOS 1.16.3-debian-1.16.3-2 RIP: 0010:merge_reloc_root+0x1266/0x1650 fs/btrfs/relocation.c:1545 Code: ffff0000 00004589 d7e9acfa ffffe8a1 79bafebe 02000000 Call Trace: merge_reloc_roots+0x295/0x890 fs/btrfs/relocation.c:1861 btrfs_recover_relocation+0xd6e/0x11d0 fs/btrfs/relocation.c:4195 btrfs_start_pre_rw_mount+0xa4d/0x1810 fs...

In the Linux kernel, the following vulnerability has been resolved: mshv: Fix error handling in mshv_region_pin The current error handling has two issues: First, pin_user_pages_fast() can return a short pin count (less than requested but greater than zero) when it cannot pin all requested pages. This is treated as success, leading to partially pinned regions being used, which causes memory corruption. Second, when an error occurs mid-loop, already pinned pages from the current batch are not properly accounted for before calling mshv_region_invalidate_pages(), causing a page reference leak. Treat short pins as errors and fix partial batch accounting before cleanup.

In the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix DMA corruption on long hmac keys When a key longer than block size is supplied, it is copied and then hashed into the real key. The memory allocated for the copy needs to be rounded to DMA cache alignment, as otherwise the hashed key may corrupt neighbouring memory. The rounding was performed, but never actually used for the allocation. Fix this by replacing kmemdup with kmalloc for a larger buffer, followed by memcpy.

In the Linux kernel, the following vulnerability has been resolved: crypto: af-alg - fix NULL pointer dereference in scatterwalk The AF_ALG interface fails to unmark the end of a Scatter/Gather List (SGL) when chaining a new af_alg_tsgl structure. If a sendmsg() fills an SGL exactly to MAX_SGL_ENTS, the last entry is marked as the end. A subsequent sendmsg() allocates a new SGL and chains it, but fails to clear the end marker on the previous SGL's last data entry. This causes the crypto scatterwalk to hit a premature end, returning NULL on sg_next() and leading to a kernel panic during dereference. Fix this by explicitly unmarking the end of the previous SGL when performing sg_chain() in af_alg_alloc_tsgl().

In the Linux kernel, the following vulnerability has been resolved: mpls: add seqcount to protect the platform_label{,s} pair The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have an inconsistent view of platform_labels vs platform_label in case of a concurrent resize (resize_platform_label_table, under platform_mutex). This can lead to OOB accesses. This patch adds a seqcount, so that we get a consistent snapshot. Note that mpls_label_ok is also susceptible to this, so the check against RTA_DST in rtm_to_route_config, done outside platform_mutex, is not sufficient. This value gets passed to mpls_label_ok once more in both mpls_route_add and mpls_route_del, so there is no issue, but that additional check must not be removed.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak __radix_tree_create() allocates and links intermediate nodes into the tree one by one. If a subsequent allocation fails, the already-linked nodes remain in the tree with no corresponding leaf entry. These orphaned internal nodes are never reclaimed because radix_tree_for_each_slot() only visits slots containing leaf values. The radix_tree API is deprecated in favor of xarray. As suggested by Matthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray instead of fixing the radix_tree itself [1]. xarray properly handles cleanup of internal nodes — xa_destroy() frees all internal xarray nodes when the qrtr_node is released, preventing the leak. [1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak When processing Router Advertisements with user options the kernel builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct has three padding fields that are never zeroed and can leak kernel data The fix is simple, just zeroes the padding fields.

In the Linux kernel, the following vulnerability has been resolved: net: ti: icssg-prueth: fix missing data copy and wrong recycle in ZC RX dispatch emac_dispatch_skb_zc() allocates a new skb via napi_alloc_skb() but never copies the packet data from the XDP buffer into it. The skb is passed up the stack containing uninitialized heap memory instead of the actual received packet, leaking kernel heap contents to userspace. Copy the received packet data from the XDP buffer into the skb using skb_copy_to_linear_data(). Additionally, remove the skb_mark_for_recycle() call since the skb is backed by the NAPI page frag allocator, not page_pool. Marking a non-page_pool skb for recycle causes the free path to return pages to a page_pool that does not own them, corrupting page_pool state. The non-ZC path (emac_rx_packet) does not have these issues because it uses napi_build_skb() to wrap the existing page_pool page directly, requiring no copy, and correctly marks for recycle since the page co...

In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a fake TLV without checking if the remaining packet length can hold the full 18-byte struct ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that e...

In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip4ip6_err() Oskar Kjos reported the following problem. ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr value. __ip_options_echo() then reads optlen from attacker-controlled packet data at sptr[rr+1] and copies that many bytes into dopt->__data, a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE). To fix this we clear skb2->cb[], as suggested by Oskar Kjos. Also add minimal IPv4 header validation (version == 4, ihl >= 5).

In the Linux kernel, the following vulnerability has been resolved: net: use skb_header_pointer() for TCPv4 GSO frag_off check Syzbot reported a KMSAN uninit-value warning in gso_features_check() called from netif_skb_features() [1]. gso_features_check() reads iph->frag_off to decide whether to clear mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr() can rely on skb header offsets that are not always safe for direct dereference on packets injected from PF_PACKET paths. Use skb_header_pointer() for the TCPv4 frag_off check so the header read is robust whether data is already linear or needs copying. [1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407

In the Linux kernel, the following vulnerability has been resolved: net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak When building netlink messages, tc_chain_fill_node() never initializes the tcm_info field of struct tcmsg. Since the allocation is not zeroed, kernel heap memory is leaked to userspace through this 4-byte field. The fix simply zeroes tcm_info alongside the other fields that are already initialized.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: set backing store type from query type bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the firmware response in ctxm->type and later uses that value to index fixed backing-store metadata arrays such as ctx_arr[] and bnxt_bstore_to_trace[]. ctxm->type is fixed by the current backing-store query type and matches the array index of ctx->ctx_arr. Set ctxm->type from the current loop variable instead of depending on resp->type. Also update the loop to advance type from next_valid_type in the for statement, which keeps the control flow simpler for non-valid and unchanged entries.