In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix locking in .getsockopt Mirror iucv_sock_setsockopt() and wrap the whole switch in lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock becomes redundant and is removed. Any AF_IUCV HIPER user can potentially crash the kernel by racing recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences iucv->hs_dev->mtu after iucv_sock_close() (called from the racing recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference oops.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared. However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang. scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the que

In the Linux kernel, the following vulnerability has been resolved: ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table() ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports too soon. Only after unregister_net_sysctl_table() we can be sure no threads can possibly use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix setup list UAF on proc write error snd_pcm_oss_proc_write() links a newly allocated setup entry into the OSS setup list before duplicating the task name. If the task-name allocation fails, the error path frees the already linked entry and leaves setup_list pointing at freed memory. A later OSS device open can then walk the stale list entry in snd_pcm_oss_look_for_setup() and dereference freed memory. Allocate the task name and initialize the setup entry before publishing the entry on setup_list. Also fetch the initial proc read iterator only after taking setup_mutex, so all setup_list traversal follows the same list lifetime rules.

In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix potential OOB access in supervision frame handling Ensure the entire TLV header is linearized before access by adding sizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this, a truncated frame could cause an out-of-bounds access.

The General Options plugin for WordPress is vulnerable to Stored Cross-Site Scripting in versions up to and including 1.1.0. This is due to the use of sanitize_text_field() for output escaping in the Contact Number (ad_contact_number) field — a function that strips HTML tags but does not encode double-quote characters to their HTML entity equivalent ("). When the stored value is echoed inside a double-quoted HTML attribute (value="..."), an attacker-supplied double-quote character breaks out of the attribute context. Even with WordPress's wp_magic_quotes mechanism (which prefixes quotes with a backslash), the resulting \" sequence is NOT treated as an escaped quote by HTML parsers — the backslash is rendered as a literal character and the bare double-quote still closes the attribute. This makes it possible for authenticated attackers with Administrator-level access and above to inject arbitrary web scripts in the admin settings page that will execute whenever any administrator

In the Linux kernel, the following vulnerability has been resolved: ethtool: rss: fix indir_table and hkey leak on get_rxfh failure rss_prepare_get() allocates the indirection table and hash key buffer via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them. If get_rxfh() fails, the function returns an error without freeing the allocation.

In the Linux kernel, the following vulnerability has been resolved: ethtool: module: call ethnl_ops_complete() on module flash errors When validate() fails we are skipping over ethnl_ops_complete() even tho we already called ethnl_ops_begin().

In the Linux kernel, the following vulnerability has been resolved: ethtool: module: avoid leaking a netdev ref on module flash errors module_flash_fw_schedule() is missing undo for setting the "in_progress" flag and taking the netdev reference. Delay taking these, the device can't disappear while we are holding rtnl_lock.

In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: require exact CDB reply length Malicious SFP module could respond with rpl_len longer than what cmis_cdb_process_reply() expected, leading to OOB writes. Malicious HW is a bit theoretical but some modules may just be buggy and/or the reads may occasionally get corrupted, so let's protect the kernel. The existing check protects from short replies. We need to protect from long ones, too. All callers that pass a non-zero rpl_exp_len cast the reply payload to a fixed-layout struct and read fields at fixed offsets, with no version negotiation or short-reply handling: - cmis_cdb_validate_password() - cmis_cdb_module_features_get() - cmis_fw_update_fw_mng_features_get() so let's assume that responses longer than expected do not have to be handled gracefully here. Add a warning message to make the debug easier in case my understanding is wrong... Note that page_data->length (argument of kmalloc) come

In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: validate start_cmd_payload_size from module The CMIS firmware update code reads start_cmd_payload_size from the module's FW Management Features CDB reply and uses it directly as the byte count for memcpy. The destination buffer is 112 bytes (ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious module (or corrupted response) can cause a OOB write later on in cmis_fw_update_start_download(). Let's error out. If modules that expect longer LPL writes actually exist we should revisit. struct cmis_cdb_start_fw_download_pl's definition has to move, no change there.

In the Linux kernel, the following vulnerability has been resolved: tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed.

In the Linux kernel, the following vulnerability has been resolved: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko.

In the Linux kernel, the following vulnerability has been resolved: tunnels: do not assume transport header in iptunnel_pmtud_check_icmp() In some cases, iptunnel_pmtud_check_icmp() can be called while skb transport header is not set. This triggers an out-of-bound access, because (typeof(skb->transport_header))~0U is 65535. Access the icmp header based on IPv4 network header, after making sure icmp->type is present in skb linear part. Note that iptunnel_pmtud_check_icmpv6()) is fine.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt() The skb_clone() function can return NULL if memory allocation fails. send_mcast_pkt() calls skb_clone() without checking the return value, which can lead to a NULL pointer dereference in send_pkt() when it dereferences skb->data. Add a NULL check after skb_clone() and skip the peer if the clone fails.

In the Linux kernel, the following vulnerability has been resolved: bonding: refuse to enslave CAN devices syzbot reported a kernel paging request crash in can_rx_unregister() inside net/can/af_can.c. The crash occurs because a virtual CAN device (vxcan) is being enslaved to a bonding master. During the enslavement process, the bonding driver mutates and modifies the network device states to fit an Ethernet-like aggregation model. However, CAN devices operate on a completely different Layer 2 architecture, relying on the CAN mid-layer private data structure (can_ml_priv) instead of standard Ethernet structures. Since bonding does not initialize or maintain these CAN structures, subsequent operations on the half-enslaved interface (such as closing associated sockets via isotp_release) lead to a null-pointer dereference when accessing the CAN receiver lists. Bonding CAN interfaces is architecturally invalid as CAN lacks MAC addresses, ARP capabilities, and standard Ethernet link-laye

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was issued in error. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage.

In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in netlink path Since the introduction of the netlink configuration path for bridge ports in commit 25c71c75ac87 ("bridge: bridge port parameters over netlink"), br_setport() was always called with the bridge lock held around it. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function only processed three STP related netlink attributes (cost, priority and state). Nowadays, br_setport() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port

In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in sysfs path Since the start of the git history, brport_store() always acquired the bridge lock. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function was only used by two STP related attributes (cost and priority). Nowadays, brport_store() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port: Only requires RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port fla

In the Linux kernel, the following vulnerability has been resolved: ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION nest list with an index 'i' and writes new_profile[i++] without bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES entries (5), but the Netlink nest count is entirely user-controlled. Netlink policies do not have support for constraining the number of nested entries (or number of multi-attr entries).