ProFTPD mod_sftp contains a heap-based buffer overflow reachable by an authenticated SFTP user. The fxp_packet_read() function accepts the attacker-supplied 32-bit big-endian SFTP packet length without a minimum sanity check. A value of 0 causes an unsigned subtraction elsewhere in the read path to underflow to approximately 4 GB. That oversized request reaches the core memory allocator, where the rounded size is computed in size_t but passed to new_block() as a 32-bit int; the low 32 bits of 0x100000000 are 0, so new_block() returns a small (~512-byte) block while the caller is told it received ~4 GB. The subsequent fill loop then streams attacker-controlled bytes past the end of the 544-byte allocation, producing an attacker-controlled heap buffer overflow. An authenticated user can crash the per-connection ProFTPD session child on demand with a single malformed SFTP packet (packet_len=0 followed by a body greater than approximately 544 bytes), producing reliable authenticated rem...

Dual-Algorithm CertificateVerify out-of-bounds read. When processing a dual-algorithm CertificateVerify message, an out-of-bounds read can occur on crafted input. This can only occur when --enable-experimental and --enable-dual-alg-certs is used when building wolfSSL.

Heap out-of-bounds read in PKCS7 parsing. A crafted PKCS7 message can trigger an OOB read on the heap. The missing bounds check is in the indefinite-length end-of-content verification loop in PKCS7_VerifySignedData().

Glances is an open-source system cross-platform monitoring tool. From 4.0.8 until 4.5.5, the secure_popen() function in glances/secure.py interprets > (file redirection), | (pipe), and && (command chaining) operators in command strings. These operators are applied without any validation on the target file path, piped command, or chained command. When Application Monitoring Process (AMP) modules load their command or service_cmd configuration values from glances.conf, those values are passed directly to secure_popen() with no sanitization. This allows an attacker who can modify the Glances configuration file to write arbitrary content to arbitrary filesystem paths (via >), chain arbitrary commands (via &&), or pipe command output to arbitrary programs (via |). This vulnerability is fixed in 4.5.5.

Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Client, Apache ActiveMQ Broker. An authenticated user can cause a broker DoS by sending a crafted OpenWire Message with a large encoded size value for the map. OpenWire message property maps are unmarshaled without size validation which can trigger OOM and crash the broker. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Client: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp. An unauthenticated client that opens a STOMP NIO connection can send header bytes that never terminate which makes the broker buffer them without limit, exhausting the JVM heap. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

diff3 tool from GNU diffutils is vulnerable to a heap‑based buffer overflow due to multiple signed integer overflows in line‑mapping calculations. Incorrect arithmetic in mapping line ranges can result in corrupted values being used for memory allocation and loop bounds. When processing crafted diff output, these overflows may cause the application to allocate insufficient memory and subsequently perform out‑of‑bounds writes during internal processing. An attacker who can control the output of the diff program used by diff3 (e.g. via --diff-program pointing to a malicious script) can trigger out-of-bounds writes, resulting in a crash and potentially remote code execution depending on the environment. This issue has been fixed in commit 9ff04d5b84743e331e80b589335a52c5480d1815 NOTE: The project maintainers claim that this is not a security issue. They state that the worst outcome this issue can cause is a crash of diff and that it cannot be used to escalate privileges.

An issue was discovered in Django 6.0 before 6.0.7 and 5.2 before 5.2.16. `DomainNameValidator` does not prohibit newlines in domain names (unless used via a form field, since `CharField` strips newlines). If an application uses values with newlines in an HTTP response, header injection can occur. Django itself is unaffected because `HttpResponse` prohibits newlines in HTTP headers. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Bence Nagy for reporting this issue.

An issue was discovered in Django 6.0 before 6.0.7 and 5.2 before 5.2.16. `django.contrib.gis.gdal.GDALRaster` over-reads its in-memory buffer when constructed from a bytes object, which can disclose adjacent memory or cause service degradation via a potential segmentation fault when the `vsi_buffer` property is accessed. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Bence Nagy for reporting this issue.

An unauthenticated user with write access to the knowledge base can store an XSS payload in a knowledge base item. This issue affects glpi: before 11.0.7.

rsync before 3.5.0 contains a symlink following vulnerability that allows local attackers to overwrite arbitrary files by placing a symlink at a predictable output path such as --log-file, --write-batch, or daemon-mode log and statistics paths. Attackers can exploit rsync's failure to reject symlinks during ancillary file writes to redirect output to arbitrary filesystem locations, achieving local privilege escalation on installations where rsync runs with elevated privileges such as setuid or privileged daemon configurations.

rsync before 3.5.0 contains an arbitrary file read vulnerability that allows attackers to read files accessible to the rsync daemon process by exploiting symlink following in input configuration file handling including --files-from, --password-file, and filter merge files. Attackers can place a symlink at a predictable --files-from or --password-file path, or supply a --files-from path that escapes the daemon module root, to read arbitrary files accessible to the rsync process.

rsync before 3.5.0 contains a symlink race condition vulnerability in the sender's directory scanning logic that allows attackers to cause the sender to enumerate and transfer files outside the module root's intended subtree. Attackers who can create or manipulate symlinks in a path component of the scanned tree can replace a symlink with a directory entry pointing outside the module root between the lstat() call and the subsequent opendir() call, exposing files beyond the intended root in both daemon-mode and non-daemon sender-side scanning.

rsync before 3.5.0 contains a symlink race condition vulnerability in the --remove-source-files feature that allows attackers with symlink creation access to cause arbitrary file deletion. Attackers can atomically substitute a symlink for a source file between transfer completion and the unlink() call, causing rsync to delete the symlink target rather than the intended source file.

rsync before 3.5.0 contains a symlink race condition vulnerability that allows local attackers to cause rsync to apply arbitrary ACLs or extended attributes to unintended files by substituting a symlink at a predictable destination path between the file write and the subsequent acl_set_file() or lsetxattr() call. Attackers can exploit this timing window to redirect ACL and xattr application through a crafted symlink to files outside the intended destination tree, potentially granting elevated permissions and enabling local privilege escalation.

rsync before 3.5.0 contains a privilege confusion vulnerability in the name-converter subprocess uid/gid mapping that allows local attackers to cause transferred files to be owned by root by influencing name-converter responses to return empty values. When the name-converter subprocess returns an empty response for a uid or gid lookup, rsync incorrectly interprets it as a successful resolution to uid/gid 0 (root) rather than a lookup failure, and if the name-converter also signals fake super-user status, rsync proceeds with root ownership assignments for transferred files.

rsync before 3.5.0 contains a symlink race condition vulnerability in the sender's source tree traversal that allows an attacker who can manipulate a parent directory of the source tree to redirect file reads to unintended paths. Attackers can atomically replace a parent directory component with a symlink pointing outside the source root between path resolution and file open operations to disclose file contents outside the intended transfer root.

rsync before 3.5.0 contains a time-of-check to time-of-use (TOCTOU) race condition vulnerability in the non-daemon receiver's destination directory handling that allows an attacker who can manipulate destination path parent components to redirect file writes to unintended locations. Attackers can substitute a symlink for a component of the destination path between the path resolution and chdir() call, causing the receiver's working directory to be established outside the intended destination tree so that subsequent relative-path file writes land in unintended filesystem locations.

rsync before 3.5.0 contains an arbitrary file write vulnerability that allows attackers to write files outside the intended destination tree by specifying an absolute path via --temp-dir or --link-dest options. The rename-confinement logic is bypassed when these options resolve to paths outside the destination tree, enabling attacker-controlled values to write files to arbitrary locations accessible to the rsync process.

rsync before 3.5.0 contains a logic error in --max-alloc handling that allows a sender or configuration setting --max-alloc=0 to disable allocation sanity checks entirely rather than enforcing a zero-byte cap. Attackers can exploit this flaw to cause the receiver to attempt unbounded memory allocations for file list and data structures, potentially exhausting available memory and causing a denial of service.