IBM Turbonomic prometurbo agent 8.16.0 through 8.17.6 IBM Turbonomic Application Resource Management grants excessive cluster‑wide permissions, including unrestricted read access to all secrets. An attacker that compromises the operator or its service account can exfiltrate sensitive credentials, escalate privileges, and potentially achieve full cluster compromise.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: mxuport: fix memory corruption with small endpoint Make sure that the bulk-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption should a malicious device report a smaller size.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: mct_u232: fix memory corruption with small endpoint The driver overrides the maximum transfer size for a specific device which only accepts 16 byte packets for its 32 byte bulk-out endpoint. Make sure to never increase the maximum transfer size to prevent slab corruption should a malicious device report a smaller endpoint max packet size than expected.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: mct_u232: fix missing interrupt-in transfer sanity check Add the missing sanity check on the size of interrupt-in transfers to avoid parsing stale or uninitialised slab data (and leaking it to user space).

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling The WebUSB GET_URL handler in composite_setup() narrows landing_page_length to fit the host-supplied wLength using landing_page_length = w_length - WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset; If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the unsigned subtraction wraps, and the subsequent memcpy(url_descriptor->URL, cdev->landing_page + landing_page_offset, landing_page_length - landing_page_offset); ends up copying close to UINT_MAX bytes from cdev->landing_page into cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the memcpy as a 4294967293-byte field-spanning write into url_descriptor->URL (size 252). A USB host can reach this from a single SETUP packet against any gadget that has webusb/use=1 and a

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: copy only received bytes on short ep0 read ffs_ep0_read() allocates its control-OUT data buffer with kmalloc() (not kzalloc) at the Length value from the Setup packet, then copies that full len to userspace regardless of how many bytes were actually received: data = kmalloc(len, GFP_KERNEL); ... ret = __ffs_ep0_queue_wait(ffs, data, len); if ((ret > 0) && (copy_to_user(buf, data, len))) ret = -EFAULT; __ffs_ep0_queue_wait() returns req->actual, which on a short control OUT transfer is strictly less than len. The copy_to_user() call still copies len bytes, so on a short OUT the last (len - ret) bytes of the kmalloc() buffer -- uninitialised slab residue -- are delivered to the FunctionFS daemon. Short ep0 OUT completions are specified USB control-transfer behavior and are produced by in-tree UDCs: * dwc2 continues on req->actual < req->length for ep0 DATA OUT (

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: serialize DMABUF cancel against request completion ffs_epfile_dmabuf_io_complete() calls usb_ep_free_request() on the completed request but leaves priv->req, the back-pointer that ffs_dmabuf_transfer() set on submission, pointing at the freed memory. A later FUNCTIONFS_DMABUF_DETACH ioctl or ffs_epfile_release() on the close path still sees priv->req non-NULL under ffs->eps_lock: if (priv->ep && priv->req) usb_ep_dequeue(priv->ep, priv->req); so usb_ep_dequeue() is called on a freed usb_request. On dummy_hcd the dequeue path only walks a live queue and pointer-compares, so the freed pointer reads without faulting and KASAN requires an explicit check at the FunctionFS call site to surface the use-after-free. On SG-capable in-tree UDCs the dequeue path dereferences the supplied request immediately: * chipidea's ep_dequeue() does container_of(req, struct ci_hw_req, req) and

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Reject u32 wrap in tb_property_entry_valid() entry->value is u32 and entry->length is u16; the sum is performed in u32 and wraps. A malicious XDomain peer can pick value = 0xffffff00, length = 0x100 so the sum 0x100000000 wraps to 0 and passes the > block_len check. tb_property_parse() then passes entry->value to parse_dwdata() as a dword offset into the property block, reading attacker-directed memory far past the allocation. For TEXT-typed entries with the "deviceid" or "vendorid" keys this lands in xd->device_name / xd->vendor_name and is readable back via the per-XDomain device_name / vendor_name sysfs attributes; the leak is NUL-bounded (kstrdup() stops at the first zero byte) and untargeted (the attacker picks a delta, not an absolute address). DATA-typed entries are parsed into property->value.data but not generically surfaced to userspace. Use check_add_overflow() so a wrapped sum i

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Reject dir_len < 4 to prevent size_t underflow On the non-root path, __tb_property_parse_dir() takes dir_len from entry->length (u16 widened to size_t). Two distinct OOB conditions follow when entry->length < 4: 1. The non-root path begins with kmemdup(&block[dir_offset], sizeof(*dir->uuid), ...) which always reads 4 dwords from dir_offset. tb_property_entry_valid() only enforces dir_offset + entry->length <= block_len, so a crafted entry with dir_offset close to the end of the property block and entry->length in 0..3 passes that gate but lets the UUID copy run off the block (e.g. dir_offset = 497, dir_len = 3 in a 500-dword block reads block[497..501]). 2. After the kmemdup, content_len = dir_len - 4 underflows size_t to ~SIZE_MAX, nentries becomes SIZE_MAX / 4, and the entry walk runs OOB on each iteration until an entry fails validation or the kernel oopses

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Cap recursion depth in __tb_property_parse_dir() A DIRECTORY entry's value field is used as the dir_offset for a recursive call into __tb_property_parse_dir() with no depth counter. A crafted peer that chains DIRECTORY entries into a back-reference loop drives the parser until the kernel stack is exhausted and the guard page fires. Any untrusted XDomain peer (cable, dock, in-line inspector, adjacent host) that reaches the PROPERTIES_REQUEST control-plane exchange can trigger this without authentication. Thread a depth counter through tb_property_parse() and __tb_property_parse_dir(), and reject blocks that exceed TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any observed legitimate XDomain layout. Operators who do not need XDomain host-to-host discovery can disable the path entirely with thunderbolt.xdomain=0 on the kernel command line.

In the Linux kernel, the following vulnerability has been resolved: scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the descriptor cursor by an attacker-supplied fip_dlen without ever requiring dlen >= sizeof(struct fip_desc) in the default branch. The named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor (fip_dtype >= 128, which the standard requires receivers to silently ignore) skipped that check entirely. An unauthenticated L2 peer on the FCoE control VLAN could hang fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely by emitting one FIP CVL frame whose single descriptor had fip_dtype == FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes per iteration and the loop condition rlen >= sizeof(*desc) stayed true forever, blocking every subsequent FIP frame on that controller.

A flaw was found in ArgoCD Image Updater. This vulnerability allows an attacker, with permissions to create or modify an ImageUpdater resource in a multi-tenant environment, to bypass namespace boundaries. By exploiting insufficient validation, the attacker can trigger unauthorized image updates on applications managed by other tenants. This leads to cross-namespace privilege escalation, impacting application integrity through unauthorized application updates.

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32 An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in the generic FC transport. This is not a local userspace or IP network path; the attacker must be able to inject fabric traffic, for example as a compromised switch or fabric controller, or as a same-zone N_Port on a fabric that permits source spoofing. The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop counter against the 32-bit on-wire pname_count field, and did not bound pname_count by the descriptor body already validated by the TLV walker. A pname_count of 256 therefore wraps the counter and keeps the loop condition true indefinitely. Factor the shared pname_list[] walk into one helper, widen the counter to u32, and clamp pname_count against the entries that fit in the descriptor body before ite

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd() Two latent bugs in the Text-phase handler, both present since the original LIO integration in commit e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1"): 1) DataDigest CRC buffer overread (4 bytes past text_in). text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then incremented by ISCSI_CRC_LEN to make room for the received DataDigest in the iovec, but the same (now-bumped) rx_size is passed as the buffer length to iscsit_crc_buf(): if (conn->conn_ops->DataDigest) { ... rx_size += ISCSI_CRC_LEN; } ... if (conn->conn_ops->DataDigest) { data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL); iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so when DataDigest is negotiated it reads 4 bytes past the en

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf iscsi_encode_text_output() concatenates "key=value\0" records into login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check the remaining buffer capacity: *length += sprintf(output_buf, "%s=%s", er->key, er->value); *length += 1; output_buf = textbuf + *length; The 8192-byte ceiling at iscsi_target_check_login_request() bounds the *input* Login PDU payload, but a single PDU can carry up to 2048 minimal four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte "a=NotUnderstood\0" output record via iscsi_add_notunderstood_response(). 2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB heap overrun in the kmalloc-8k slab. The fix introduces a static iscsi_encode_text

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Validate CHAP_R length before base64 decode chap_server_compute_hash() allocates client_digest as kzalloc(chap->digest_size) and then, for BASE64-encoded responses, passes chap_r directly to chap_base64_decode() without checking whether the input length could produce more than digest_size bytes of output. chap_base64_decode() writes to the destination unconditionally as long as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and the "0b" prefix stripped by extract_param(), up to 127 base64 characters can reach the decoder. 127 characters decode to 95 bytes. For SHA-256 (digest_size=32) this overflows client_digest by 63 bytes; for MD5 (digest_size=16) the overflow is 79 bytes. The length check at line 344 fires after the write has already happened. The HEX branch in the same switch statement already validates the length up front. Apply the same approach to the BASE64 branch: str

In the Linux kernel, the following vulnerability has been resolved: drm/gem: fix race between change_handle and handle_delete drm_gem_change_handle_ioctl leaves the old handle live in the IDR during the window between spin_unlock(table_lock) and the final spin_lock(table_lock). A concurrent drm_gem_handle_delete on the old handle succeeds in this window, decrements handle_count to 0, and frees the GEM object while the new handle's IDR entry still references it. NULL the old handle's IDR entry before dropping table_lock so that any concurrent GEM_CLOSE on the old handle sees NULL and returns -EINVAL. Restore the old entry on the prime-bookkeeping error path.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential UAF in TTM object purge TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(), move casting it to an i915_tt object later to actually get the right pointer. A user reported hitting the following bug under heavy use on DG2: [26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI [26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy) [26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025 [26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915] [26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78 [26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282 [26620.09

In the Linux kernel, the following vulnerability has been resolved: serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ When uart_flush_buffer() runs before the DMA completion IRQ is delivered, the following race can occur (all steps serialized by uart_port_lock): 1. DMA starts: tx_remaining = N, kfifo contains N bytes 2. DMA completes in hardware; IRQ is pending but not yet delivered 3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(), making kfifo_len() = 0 while tx_remaining remains N 4. uart_flush_buffer() releases the port lock 5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls uart_xmit_advance(uport, tx_remaining) on an empty kfifo uart_xmit_advance() increments kfifo->out by tx_remaining. Since kfifo_reset() already set both in and out to 0, out wraps past in, causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The next start_tx_dma() call then submits a DMA transfer of stale buffer dat

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL pointer bug in svm_range_set_attr The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm before calling kfd_ioctl_svm. (cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4)