In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix NULL pointer dereference in bond_do_ioctl() In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which can return NULL if the requested interface name does not exist. However, the subsequent slave_dbg() call is placed before the NULL check: slave_dev = __dev_get_by_name(net, ifr->ifr_slave); slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here if (!slave_dev) return -ENODEV; The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt, (slave_dev)->name, ...) which unconditionally dereferences slave_dev->name before the NULL check is performed. This results in a NULL pointer dereference kernel oops when a user calls bonding ioctl (e.g. SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave interface name. This is reachable from userspace via the bonding ioctl interface with CAP_NET_ADMIN capability, making it a potential local denial-of-service ve...

In the Linux kernel, the following vulnerability has been resolved: nvmem: layouts: onie-tlv: fix hang on unknown types The EEPROM on my board has a vendor specific entry of type 0x41. When stumbling upon that, this driver hangs in an endless loop. Fix it by keep incrementing the offset on unknown entries, so the loop will eventually stop.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: handle ctx allocation failure DAMON_LRU_SORT allocates the damon_ctx object for its kdamond in its init function. damon_lru_sort_enabled_store() wrongly assumes the allocation will always succeed once tried. If the damon_ctx allocation was failed, therefore, code execution reaches to damon_commit_ctx() while 'ctx' is NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the NULL dereference by returning -ENOMEM if 'ctx' is NULL.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/reclaim: handle ctx allocation failure Patch series "mm/damon/{reclaim,lru_sort}: handle ctx allocation failures". DAMON_RECLAIM and DAMON_LRU_SORT could dereference NULL pointers if their damon_ctx object allocations fail. The bugs are expected to happen infrequently because the allocations are arguably too small to fail on common setups. But theoretically they are possible and the consequences are bad. Fix those. The issues were discovered [1] by Sashiko. This patch (of 2): DAMON_RECLAIM allocates the damon_ctx object for its kdamond in its init function. damon_reclaim_enabled_store() wrongly assumes the allocation will always succeed once tried. If the damon_ctx allocation was failed, therefore, code execution reaches to damon_commit_ctx() while 'ctx' is NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the NULL dereference by returning -ENOMEM if 'ctx' is NULL.

In the Linux kernel, the following vulnerability has been resolved: mm/mincore: handle non-swap entries before !CONFIG_SWAP guard mincore_swap() also fields migration/hwpoison entries (and shmem swapin-error entries), which can exist on !CONFIG_SWAP builds when CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The !IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return, so mincore_pte_range() can spuriously WARN and report these pages nonresident on !CONFIG_SWAP kernels. Move the guard below the non-swap-entry check so only true swap entries trip the WARN, and migration/hwpoison entries take the existing "uptodate / non-shmem" path.

In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards. One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work. [ 21.858578] ------------[ cut here ]------------ [ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116 ... [ 21.859251] Call trace: [ 21.859255] __queue_work+0x5e0/0x790 (P) [ 21.859265] queue_work_on+0x6c/0xf0 [ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl] [ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_...

In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock During the SSR/PDR down notification the tx_lock is taken with the intent to provide synchronization with active DMA transfers. But during this period qcom_slim_ngd_down() is invoked, which ends up in slim_report_absent(), which takes the slim_controller lock. In multiple other codepaths these two locks are taken in the opposite order (i.e. slim_controller then tx_lock). The result is a lockdep splat, and a possible deadlock: rprocctl/449 is trying to acquire lock: ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus but task is already holding lock: ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ...

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval() [Why & How] The aux_rd_interval array in struct dc_lttpr_caps is declared with MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset parameter passed to dp_get_eq_aux_rd_interval() can be as large as MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD. This leads to an out-of-bounds read of aux_rd_interval[7] when offset is 8. Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to accommodate the full range of valid repeater counts defined by the DP spec. (cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Use krealloc_array() in dal_vector_reserve() [Why & How] dal_vector_reserve() computes the allocation size as "capacity * vector->struct_size" using uint32_t arithmetic, which can silently wrap to a small value on overflow. This would cause krealloc to return a smaller buffer than expected, leading to heap overflows on subsequent vector appends. Replace krealloc() with krealloc_array() which performs an internal overflow check and returns NULL on wrap, preventing the issue. (cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707)

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task() A WARN fires when systemd's user manager writes "+cpu +memory +pids" to its own subtree_control while a sched_ext scheduler is loaded: WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0 scx_cgroup_move_task+0xa8/0xb0 sched_move_task+0x134/0x290 cpu_cgroup_attach+0x39/0x70 cgroup_migrate_execute+0x37d/0x450 cgroup_update_dfl_csses+0x1e3/0x270 cgroup_subtree_control_write+0x3e7/0x440 scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu cgroup changes. It can still be NULL when scx_cgroup_move_task() runs, through this sequence: Step Result --------------------------------- ---------------------------------- 1. cpu enabled on cgroup G cpu css = A 2. cpu toggled off then on for G A killed, B created (same cgroup) 3. an exiting task keeps A alive migration skips it, A now sta...

In the Linux kernel, the following vulnerability has been resolved: debugobjects: Do not fill_pool() if pi_blocked_on On RT enabled kernels, fill_pool() ends up calling rtlock_lock(), which asserts if current::pi_blocked_on is set, because a task can obviously only block on one lock as otherwise the priority inheritenace chain gets corrupted. Prevent this by expanding the conditional to take current::pi_blocked_on into account.

In the Linux kernel, the following vulnerability has been resolved: debugobjects: Don't call fill_pool() in early boot hardirq context When booting a debug PREEMPT_RT kernel on an ARM64 system, a "inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage" lockdep warning message was reported to the console. During early boot, interrupts are enabled before the scheduler is enabled. In this window (before SYSTEM_SCHEDULING is set) interrupts can fire and in the hard interrupt context handler attempt to fill the pool This can lead to a deadlock when the interrupt occurred when the interrupt hits a region which holds a lock that is required to be taken in the allocation path. Add a new can_fill_pool() helper and reorder the exception rule and forbid this scenario by excluding allocations from hard interrupt context.

In the Linux kernel, the following vulnerability has been resolved: agp/amd64: Fix broken error propagation in agp_amd64_probe() A NULL pointer dereference was observed in the AMD64 AGP driver when running in a virtualized environment (e.g. qemu/kvm) without a physical AMD northbridge. The crash occurs in amd64_fetch_size() when attempting to dereference the pointer returned by node_to_amd_nb(0). The root cause of this crash is broken error propagation in agp_amd64_probe(): When no AMD northbridges are found, cache_nbs() correctly returns -ENODEV. However, the probe function erroneously checks the return value against exactly -1, rather than < 0. As a result, the hardware absence error is masked, allowing the driver to improperly proceed with initialization. It eventually calls agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware does not exist, node_to_amd_nb(0) returns NULL, leading to a General Protection Fault (GPF) when accessing its ->misc member. Fix the iss...

In the Linux kernel, the following vulnerability has been resolved: net: mana: Use pci_name() for debugfs directory naming Use pci_name(pdev) for the per-device debugfs directory instead of hardcoded "0" for PFs and pci_slot_name(pdev->slot) for VFs. The previous approach had two issues: 1. pci_slot_name() dereferences pdev->slot, which can be NULL for VFs in environments like generic VFIO passthrough or nested KVM, causing a NULL pointer dereference. 2. Multiple PFs would all use "0", and VFs across different PCI domains or buses could share the same slot name, leading to -EEXIST errors from debugfs_create_dir(). pci_name(pdev) returns the unique BDF address, is always valid, and is unique across the system.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: remove redundant netdev_lock_ops() from conduit ethtool ops DSA replaces the conduit (master) device's ethtool_ops with its own wrappers that aggregate stats from both the conduit and DSA switch ports. Taking the lock again inside the DSA wrappers causes a deadlock. Stumbled upon this when booting qemu with fbnic and CONFIG_NET_DSA_LOOP=y (which looks like some kind of testing device that auto-populates the ports of eth0). `ethtool -i` is enough to deadlock. This means we have basically zero coverage for DSA stuff with real ops locked devs. Remove the redundant netdev_lock_ops()/netdev_unlock_ops() calls from the DSA conduit ethtool wrappers.

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Clean up DMABUFs before disabling function On device shutdown, make vfio_pci_core_close_device() call vfio_pci_dma_buf_cleanup() before the function is disabled via vfio_pci_core_disable(). This ensures that all access via DMABUFs is revoked before the function's BARs become inaccessible. This fixes an issue where, if the function is disabled first, a tiny window exists in which the function's MSE is cleared and yet BARs could still be accessed via the DMABUF. The resources would also be freed and up for grabs by a different driver.

In the Linux kernel, the following vulnerability has been resolved: io_uring/napi: cap busy_poll_to 10 msec Currently there's no cap on the maximum amount of time that napi is allowed to poll if no events are found, which can lead to kernel complaints on a task being stuck as there's no conditional rescheduling done within that loop. Just cap it to 10 msec in total, that's already way above any kind of sane value that will reap any benefits, yet low enough that it's nowhere near being able to trigger preemption complaints.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty() nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead blocks by comparing it with the current block number bd_blocknr. If they differ, the block is considered dead and skipped. However, bd_oblocknr should never be 0 since block 0 typically stores the primary superblock and is never a valid GC target block. A corrupted ioctl request with bd_oblocknr set to 0 causes the comparison to incorrectly match when the lookup returns -ENOENT and sets bd_blocknr to 0, bypassing the dead block check and calling nilfs_bmap_mark() on a non-existent block. This causes nilfs_btree_do_lookup() to return -ENOENT, triggering the WARN_ON(ret == -ENOENT). Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at the beginning of each iteration. [ryusuke: slightly modified the commit message and comments for accuracy]

In the Linux kernel, the following vulnerability has been resolved: blk-wbt: remove WARN_ON_ONCE from wbt_init_enable_default() wbt_init_enable_default() uses WARN_ON_ONCE to check for failures from wbt_alloc() and wbt_init(). However, both are expected failure paths: - wbt_alloc() can return NULL under memory pressure (-ENOMEM) - wbt_init() can fail with -EBUSY if wbt is already registered syzbot triggers this by injecting memory allocation failures during MTD partition creation via ioctl(BLKPG), causing a spurious warning. wbt_init_enable_default() is a best-effort initialization called from blk_register_queue() with a void return type. Failure simply means the disk operates without writeback throttling, which is harmless. Replace WARN_ON_ONCE with plain if-checks, consistent with how wbt_set_lat() in the same file already handles these failures. Add a pr_warn() for the wbt_init() failure to retain diagnostic information without triggering a full stack trace.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_tx_check_aggr() Move the NULL check for 'sta' before dereferencing it to prevent a possible crash.