Количество 77 240
Количество 77 240
CVE-2026-53179
In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix buffer over-read in rtw_update_protection rtw_update_protection() is called with a pointer offset into the ies buffer but the full ie_length is passed, causing a potential buffer over-read.
CVE-2026-53178
In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction Add guards to ensure ie_length is large enough before subtracting fixed IE offsets to prevent unsigned integer underflow.
CVE-2026-53177
In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix NULL pointer dereference PCIe errors detected by a Root Port or Downstream Port cause error recovery services to run on all subordinate devices regardless of administrative state. The .error_detected() callback, bnxt_io_error_detected(), disables and synchronizes IRQs via bnxt_disable_int_sync(), which calls bnxt_cp_num_to_irq_num() to map completion rings to IRQs using bp->bnapi. Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe error recovery on a closed NIC can dereference a NULL pointer. Check if bp->bnapi is NULL before disabling and synchronizing IRQs.
CVE-2026-53176
In the Linux kernel, the following vulnerability has been resolved: IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done() computes the login request payload length as wc->byte_len minus ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int. A remote iSER initiator can post a login Send work request carrying fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows and login_req_len becomes negative. isert_rx_login_req() then reads that negative length back into a signed int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the min() is signed it keeps the negative value; the value is then passed as the memcpy() length and sign-extended to a multi-gigabyte size_t. The copy into the 8192-byte login->req_buf runs far out of bounds and faults, crashing the target node. The login phase precedes iSCSI authentication, so no credentials are required to reach this path. Reject a...
CVE-2026-53175
In the Linux kernel, the following vulnerability has been resolved: inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and flushes every fragment queue that is not yet complete using inet_frag_queue_flush(). That helper frees all the skbs queued on the fragment queue but does not set INET_FRAG_COMPLETE, and leaves q->fragments_tail and q->last_run_head pointing at the freed skbs. The queue itself stays in the rhashtable. fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups, but it cannot stop a fragment that already obtained the queue through inet_frag_find() earlier and stalled just before taking the queue lock. Once that fragment resumes after the flush and takes the queue lock, it passes the INET_FRAG_COMPLETE check and then dereferences the freed fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of that pointer and, on the append path, writes ->next_frag, causing...
CVE-2026-53174
In the Linux kernel, the following vulnerability has been resolved: ovl: keep err zero after successful ovl_cache_get() ovl_iterate_merged() stores PTR_ERR(cache) in err before checking IS_ERR(cache). On success err holds the truncated cache pointer and can be returned as a bogus non-zero error. The syzbot reproducer reaches this through overlay-on-overlay readdir: getdents64 iterate_dir(outer overlay file) ovl_iterate_merged() ovl_cache_get() ovl_dir_read_merged() ovl_dir_read() iterate_dir(inner overlay file) ovl_iterate_merged() Only compute PTR_ERR(cache) on the error path.
CVE-2026-53173
In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate() The command stream parsing loop increments the index variable a second time when a 64-bit command word is encountered (bit 14 set), but does not re-check the loop bound before writing the second word: for (i = 0; i < size / 4; i++) { bocmds[i] = cmds[0]; if (cmd & 0x4000) { i++; bocmds[i] = cmds[1]; /* unchecked */ } } The buffer bocmds is backed by a DMA allocation of exactly size bytes from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1]. When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is set, bocmds[size/4-1] is written in bounds, i is then incremented to size/4, and bocmds[size/4] writes four bytes past the end of the allocation. Userspace controls both the buffer contents and the size argument via the ioctl, making this a userspace-triggerable heap out-of-bounds write. Fix by checking the incremented...
CVE-2026-53172
In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix IFM region index out-of-bounds in command stream parser NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving a maximum value of 127. However region_size[] and output_region[] in struct ethosu_validated_cmdstream_info are both sized to NPU_BASEP_REGION_MAX (8), giving valid indices [0..7]. Every other region assignment in the same switch uses param & 0x7: NPU_SET_OFM_REGION: st.ofm.region = param & 0x7; NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7; NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7; NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7; The 0x7f mask on IFM is inconsistent and appears to be a typo. feat_matrix_length() and calc_sizes() use the region index directly as an array subscript into the kzalloc'd info struct: info->region_size[fm->region] = max(...); A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes a write up to 127*8 =...
CVE-2026-53171
In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix arithmetic issues in dma_length() dma_length() derives DMA region usage from command stream values and updates region_size[]: len = ((len + stride[0]) * size0 + stride[1]) * size1 region_size[region] = max(..., len + dma->offset) Several arithmetic issues can corrupt the derived region size: - signed stride values may underflow when added to len - intermediate multiplications may overflow - len + dma->offset may overflow during region_size updates - dma_length() error returns were not validated by the caller region_size[] is later used by ethosu_job.c to validate command stream accesses against GEM buffer sizes. Arithmetic wraparound can therefore under-report region usage and bypass the bounds validation. Fix by validating signed additions, using overflow helpers for multiplications and offset updates, and propagating dma_length() failures to the caller.
CVE-2026-53170
In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: reject DMA commands with uninitialized length cmd_state_init() initializes the command state with memset(0xff), leaving dma->len at U64_MAX to signal missing setup. The only setter is NPU_SET_DMA0_LEN; if userspace omits this command and issues NPU_OP_DMA_START, dma->len remains U64_MAX. In dma_length(), a positive stride added to U64_MAX wraps to a small value. With size0 == 1, check_mul_overflow() does not trigger and dma_length() returns 0 instead of U64_MAX. The caller's U64_MAX check then passes, region_size[] stays 0, and the bounds check in ethosu_job.c is bypassed, allowing hardware to execute DMA with stale physical addresses. Fix by checking for U64_MAX at the start of dma_length() before any arithmetic, consistent with the sentinel value used throughout the driver to detect uninitialized fields.
CVE-2026-5316
A vulnerability was identified in Nothings stb up to 1.22. The impacted element is the function setup_free of the file stb_vorbis.c. The manipulation leads to allocation of resources. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2026-53169
In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: reject NPU_OP_RESIZE commands from userspace NPU_OP_RESIZE is a U85-only command that the driver does not yet implement. The existing WARN_ON(1) placeholder fires unconditionally whenever userspace submits this command via DRM_IOCTL_ETHOSU_GEM_CREATE, causing unbounded kernel log spam. If panic_on_warn is set the kernel panics, giving any unprivileged user with access to the DRM device a trivial denial-of-service primitive. Replace the WARN_ON(1) with an explicit -EINVAL return so the ioctl rejects the command before it reaches hardware.
CVE-2026-53168
In the Linux kernel, the following vulnerability has been resolved: fuse: reject fuse_notify() pagecache ops on directories The operations FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE allow the FUSE daemon to actively write/read pagecache contents. For directories with FOPEN_CACHE_DIR, the pagecache is used as kernel-internal cache storage, and userspace is not supposed to have direct access to this cache - in particular, fuse_parse_cache() will hit WARN_ON() if the cache contains bogus data. Reject FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE on anything other than regular files with -EINVAL.
CVE-2026-53167
In the Linux kernel, the following vulnerability has been resolved: fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios can contain uninitialized data. Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already in the page cache and not wait for data from the FUSE daemon, treat !uptodate folios as if they weren't present. This only has security impact on systems that don't enable automatic zero-initialization of all page allocations via CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1.
CVE-2026-53166
Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
CVE-2026-53165
In the Linux kernel, the following vulnerability has been resolved: iomap: avoid potential null folio->mapping deref during error reporting When a buffered read fails, iomap_finish_folio_read() reports the error with fserror_report_io(folio->mapping->host, ...). This is called after ifs->read_bytes_pending has been decremented by the bytes attempted to be read. For a folio split across multiple read completions, the folio is only guaranteed to stay locked while read_bytes_pending > 0. Once iomap_finish_folio_read() decrements read_bytes_pending, another in-flight read can complete and end the read on the folio, which unlocks it. This allows truncate logic to run and detach the folio (set folio->mapping to NULL). The error reporting path then can dereference a NULL folio->mapping. As reported by Sam Sun, this is the race that can occur: CPU0: failed completion CPU1: final completion CPU2: truncate ----------------------- ---------------------- -------------- read_by...
CVE-2026-53164
In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Do not try to iommu_map a 0 length region in swiotlb iommu_dma_iova_link_swiotlb() processes a mapping that is unaligned in three parts, the head, middle and trailer. If the middle is empty because there are no aligned pages it will call down to iommu_map() with a 0 size which the iommupt implementation will fail as illegal. It then tries to do an error unwind and starts from the wrong spot corrupting the mapping so the eventual destruction triggers a WARN_ON. Check for 0 length and avoid mapping and use offset not 0 as the starting point to unlink. This is frequently triggered by using some kinds of thunderbolt NVMe drives that trigger forced SWIOTLB for unaligned memory. NVMe seems to pass in oddly aligned buffers for the passthrough commands from smartctl that hit this condition.
CVE-2026-53163
In the Linux kernel, the following vulnerability has been resolved: locking/rtmutex: Skip remove_waiter() when waiter is not enqueued syzbot triggered the following splat in remove_waiter() via FUTEX_CMP_REQUEUE_PI: KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f] class_raw_spinlock_constructor remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561 rt_mutex_start_proxy_lock+0x103/0x120 futex_requeue+0x10e4/0x20d0 __x64_sys_futex+0x34f/0x4d0 task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection, leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead of current in remove_waiter()") made this fatal. Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter() upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock() (where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this ch...
CVE-2026-53162
In the Linux kernel, the following vulnerability has been resolved: memcg: use round-robin victim selection in refill_stock Harry Yoo reported that get_random_u32_below() is not safe to call in the nmi context and memcg charge draining can happen in nmi context. More specifically get_random_u32_below() is neither reentrant- nor NMI-safe: it acquires a per-cpu local_lock via local_lock_irqsave() on the batched_entropy_u32 state. An NMI that lands on a CPU mid-update of the ChaCha batch state and recurses into the random subsystem would corrupt that state. The memcg_stock local_trylock prevents re-entry on the percpu stock itself, but cannot protect an unrelated subsystem's per-cpu lock. Replace the random pick with a per-cpu round-robin counter stored in memcg_stock_pcp and serialized by the same local_trylock that already guards cached[] and nr_pages[]. No atomics, no random calls, no extra locks needed.
CVE-2026-53161
In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free of fastrpc_user in workqueue context There is a race between fastrpc_device_release() and the workqueue that processes DSP responses. When the user closes the file descriptor, fastrpc_device_release() frees the fastrpc_user structure. Concurrently, an in-flight DSP invocation can complete and fastrpc_rpmsg_callback() schedules context cleanup via schedule_work(&ctx->put_work). If the workqueue runs fastrpc_context_free() in parallel with or after fastrpc_device_release() has freed the user structure, it dereferences the freed fastrpc_user. Depending on the state of the context at the time of the race, any one of the following accesses can be hit: 1. fastrpc_buf_free() calls fastrpc_ipa_to_dma_addr(buf->fl->cctx, ...) to strip the SID bits from the stored IOVA before passing the physical address to dma_free_coherent(). 2. fastrpc_free_map() reads map->fl->cctx->vmperms[0].vmid to rec...
Уязвимостей на страницу
Уязвимость | CVSS | EPSS | Опубликовано | |
|---|---|---|---|---|
CVE-2026-53179 In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix buffer over-read in rtw_update_protection rtw_update_protection() is called with a pointer offset into the ies buffer but the full ie_length is passed, causing a potential buffer over-read. | CVSS3: 7.1 | 0% Низкий | 2 месяца назад | |
CVE-2026-53178 In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction Add guards to ensure ie_length is large enough before subtracting fixed IE offsets to prevent unsigned integer underflow. | CVSS3: 8.1 | 0% Низкий | 2 месяца назад | |
CVE-2026-53177 In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix NULL pointer dereference PCIe errors detected by a Root Port or Downstream Port cause error recovery services to run on all subordinate devices regardless of administrative state. The .error_detected() callback, bnxt_io_error_detected(), disables and synchronizes IRQs via bnxt_disable_int_sync(), which calls bnxt_cp_num_to_irq_num() to map completion rings to IRQs using bp->bnapi. Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe error recovery on a closed NIC can dereference a NULL pointer. Check if bp->bnapi is NULL before disabling and synchronizing IRQs. | CVSS3: 5.5 | 0% Низкий | 2 месяца назад | |
CVE-2026-53176 In the Linux kernel, the following vulnerability has been resolved: IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done() computes the login request payload length as wc->byte_len minus ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int. A remote iSER initiator can post a login Send work request carrying fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows and login_req_len becomes negative. isert_rx_login_req() then reads that negative length back into a signed int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the min() is signed it keeps the negative value; the value is then passed as the memcpy() length and sign-extended to a multi-gigabyte size_t. The copy into the 8192-byte login->req_buf runs far out of bounds and faults, crashing the target node. The login phase precedes iSCSI authentication, so no credentials are required to reach this path. Reject a... | CVSS3: 9.8 | 1% Низкий | 2 месяца назад | |
CVE-2026-53175 In the Linux kernel, the following vulnerability has been resolved: inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and flushes every fragment queue that is not yet complete using inet_frag_queue_flush(). That helper frees all the skbs queued on the fragment queue but does not set INET_FRAG_COMPLETE, and leaves q->fragments_tail and q->last_run_head pointing at the freed skbs. The queue itself stays in the rhashtable. fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups, but it cannot stop a fragment that already obtained the queue through inet_frag_find() earlier and stalled just before taking the queue lock. Once that fragment resumes after the flush and takes the queue lock, it passes the INET_FRAG_COMPLETE check and then dereferences the freed fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of that pointer and, on the append path, writes ->next_frag, causing... | CVSS3: 9.8 | 0% Низкий | 2 месяца назад | |
CVE-2026-53174 In the Linux kernel, the following vulnerability has been resolved: ovl: keep err zero after successful ovl_cache_get() ovl_iterate_merged() stores PTR_ERR(cache) in err before checking IS_ERR(cache). On success err holds the truncated cache pointer and can be returned as a bogus non-zero error. The syzbot reproducer reaches this through overlay-on-overlay readdir: getdents64 iterate_dir(outer overlay file) ovl_iterate_merged() ovl_cache_get() ovl_dir_read_merged() ovl_dir_read() iterate_dir(inner overlay file) ovl_iterate_merged() Only compute PTR_ERR(cache) on the error path. | CVSS3: 7.8 | 0% Низкий | 2 месяца назад | |
CVE-2026-53173 In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate() The command stream parsing loop increments the index variable a second time when a 64-bit command word is encountered (bit 14 set), but does not re-check the loop bound before writing the second word: for (i = 0; i < size / 4; i++) { bocmds[i] = cmds[0]; if (cmd & 0x4000) { i++; bocmds[i] = cmds[1]; /* unchecked */ } } The buffer bocmds is backed by a DMA allocation of exactly size bytes from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1]. When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is set, bocmds[size/4-1] is written in bounds, i is then incremented to size/4, and bocmds[size/4] writes four bytes past the end of the allocation. Userspace controls both the buffer contents and the size argument via the ioctl, making this a userspace-triggerable heap out-of-bounds write. Fix by checking the incremented... | CVSS3: 7.8 | 0% Низкий | 2 месяца назад | |
CVE-2026-53172 In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix IFM region index out-of-bounds in command stream parser NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving a maximum value of 127. However region_size[] and output_region[] in struct ethosu_validated_cmdstream_info are both sized to NPU_BASEP_REGION_MAX (8), giving valid indices [0..7]. Every other region assignment in the same switch uses param & 0x7: NPU_SET_OFM_REGION: st.ofm.region = param & 0x7; NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7; NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7; NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7; The 0x7f mask on IFM is inconsistent and appears to be a typo. feat_matrix_length() and calc_sizes() use the region index directly as an array subscript into the kzalloc'd info struct: info->region_size[fm->region] = max(...); A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes a write up to 127*8 =... | CVSS3: 7.8 | 0% Низкий | 2 месяца назад | |
CVE-2026-53171 In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix arithmetic issues in dma_length() dma_length() derives DMA region usage from command stream values and updates region_size[]: len = ((len + stride[0]) * size0 + stride[1]) * size1 region_size[region] = max(..., len + dma->offset) Several arithmetic issues can corrupt the derived region size: - signed stride values may underflow when added to len - intermediate multiplications may overflow - len + dma->offset may overflow during region_size updates - dma_length() error returns were not validated by the caller region_size[] is later used by ethosu_job.c to validate command stream accesses against GEM buffer sizes. Arithmetic wraparound can therefore under-report region usage and bypass the bounds validation. Fix by validating signed additions, using overflow helpers for multiplications and offset updates, and propagating dma_length() failures to the caller. | CVSS3: 8.8 | 0% Низкий | 2 месяца назад | |
CVE-2026-53170 In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: reject DMA commands with uninitialized length cmd_state_init() initializes the command state with memset(0xff), leaving dma->len at U64_MAX to signal missing setup. The only setter is NPU_SET_DMA0_LEN; if userspace omits this command and issues NPU_OP_DMA_START, dma->len remains U64_MAX. In dma_length(), a positive stride added to U64_MAX wraps to a small value. With size0 == 1, check_mul_overflow() does not trigger and dma_length() returns 0 instead of U64_MAX. The caller's U64_MAX check then passes, region_size[] stays 0, and the bounds check in ethosu_job.c is bypassed, allowing hardware to execute DMA with stale physical addresses. Fix by checking for U64_MAX at the start of dma_length() before any arithmetic, consistent with the sentinel value used throughout the driver to detect uninitialized fields. | CVSS3: 8.8 | 0% Низкий | 2 месяца назад | |
CVE-2026-5316 A vulnerability was identified in Nothings stb up to 1.22. The impacted element is the function setup_free of the file stb_vorbis.c. The manipulation leads to allocation of resources. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | CVSS3: 4.3 | 0% Низкий | 5 месяцев назад | |
CVE-2026-53169 In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: reject NPU_OP_RESIZE commands from userspace NPU_OP_RESIZE is a U85-only command that the driver does not yet implement. The existing WARN_ON(1) placeholder fires unconditionally whenever userspace submits this command via DRM_IOCTL_ETHOSU_GEM_CREATE, causing unbounded kernel log spam. If panic_on_warn is set the kernel panics, giving any unprivileged user with access to the DRM device a trivial denial-of-service primitive. Replace the WARN_ON(1) with an explicit -EINVAL return so the ioctl rejects the command before it reaches hardware. | CVSS3: 5.5 | 0% Низкий | 2 месяца назад | |
CVE-2026-53168 In the Linux kernel, the following vulnerability has been resolved: fuse: reject fuse_notify() pagecache ops on directories The operations FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE allow the FUSE daemon to actively write/read pagecache contents. For directories with FOPEN_CACHE_DIR, the pagecache is used as kernel-internal cache storage, and userspace is not supposed to have direct access to this cache - in particular, fuse_parse_cache() will hit WARN_ON() if the cache contains bogus data. Reject FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE on anything other than regular files with -EINVAL. | CVSS3: 5.5 | 0% Низкий | 2 месяца назад | |
CVE-2026-53167 In the Linux kernel, the following vulnerability has been resolved: fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios can contain uninitialized data. Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already in the page cache and not wait for data from the FUSE daemon, treat !uptodate folios as if they weren't present. This only has security impact on systems that don't enable automatic zero-initialization of all page allocations via CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1. | CVSS3: 5.5 | 0% Низкий | 2 месяца назад | |
CVE-2026-53166 Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | 2 месяца назад | |||
CVE-2026-53165 In the Linux kernel, the following vulnerability has been resolved: iomap: avoid potential null folio->mapping deref during error reporting When a buffered read fails, iomap_finish_folio_read() reports the error with fserror_report_io(folio->mapping->host, ...). This is called after ifs->read_bytes_pending has been decremented by the bytes attempted to be read. For a folio split across multiple read completions, the folio is only guaranteed to stay locked while read_bytes_pending > 0. Once iomap_finish_folio_read() decrements read_bytes_pending, another in-flight read can complete and end the read on the folio, which unlocks it. This allows truncate logic to run and detach the folio (set folio->mapping to NULL). The error reporting path then can dereference a NULL folio->mapping. As reported by Sam Sun, this is the race that can occur: CPU0: failed completion CPU1: final completion CPU2: truncate ----------------------- ---------------------- -------------- read_by... | CVSS3: 7.5 | 0% Низкий | 2 месяца назад | |
CVE-2026-53164 In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Do not try to iommu_map a 0 length region in swiotlb iommu_dma_iova_link_swiotlb() processes a mapping that is unaligned in three parts, the head, middle and trailer. If the middle is empty because there are no aligned pages it will call down to iommu_map() with a 0 size which the iommupt implementation will fail as illegal. It then tries to do an error unwind and starts from the wrong spot corrupting the mapping so the eventual destruction triggers a WARN_ON. Check for 0 length and avoid mapping and use offset not 0 as the starting point to unlink. This is frequently triggered by using some kinds of thunderbolt NVMe drives that trigger forced SWIOTLB for unaligned memory. NVMe seems to pass in oddly aligned buffers for the passthrough commands from smartctl that hit this condition. | CVSS3: 5.5 | 0% Низкий | 2 месяца назад | |
CVE-2026-53163 In the Linux kernel, the following vulnerability has been resolved: locking/rtmutex: Skip remove_waiter() when waiter is not enqueued syzbot triggered the following splat in remove_waiter() via FUTEX_CMP_REQUEUE_PI: KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f] class_raw_spinlock_constructor remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561 rt_mutex_start_proxy_lock+0x103/0x120 futex_requeue+0x10e4/0x20d0 __x64_sys_futex+0x34f/0x4d0 task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection, leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead of current in remove_waiter()") made this fatal. Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter() upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock() (where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this ch... | CVSS3: 5.5 | 0% Низкий | 2 месяца назад | |
CVE-2026-53162 In the Linux kernel, the following vulnerability has been resolved: memcg: use round-robin victim selection in refill_stock Harry Yoo reported that get_random_u32_below() is not safe to call in the nmi context and memcg charge draining can happen in nmi context. More specifically get_random_u32_below() is neither reentrant- nor NMI-safe: it acquires a per-cpu local_lock via local_lock_irqsave() on the batched_entropy_u32 state. An NMI that lands on a CPU mid-update of the ChaCha batch state and recurses into the random subsystem would corrupt that state. The memcg_stock local_trylock prevents re-entry on the percpu stock itself, but cannot protect an unrelated subsystem's per-cpu lock. Replace the random pick with a per-cpu round-robin counter stored in memcg_stock_pcp and serialized by the same local_trylock that already guards cached[] and nr_pages[]. No atomics, no random calls, no extra locks needed. | CVSS3: 7.8 | 0% Низкий | 2 месяца назад | |
CVE-2026-53161 In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free of fastrpc_user in workqueue context There is a race between fastrpc_device_release() and the workqueue that processes DSP responses. When the user closes the file descriptor, fastrpc_device_release() frees the fastrpc_user structure. Concurrently, an in-flight DSP invocation can complete and fastrpc_rpmsg_callback() schedules context cleanup via schedule_work(&ctx->put_work). If the workqueue runs fastrpc_context_free() in parallel with or after fastrpc_device_release() has freed the user structure, it dereferences the freed fastrpc_user. Depending on the state of the context at the time of the race, any one of the following accesses can be hit: 1. fastrpc_buf_free() calls fastrpc_ipa_to_dma_addr(buf->fl->cctx, ...) to strip the SID bits from the stored IOVA before passing the physical address to dma_free_coherent(). 2. fastrpc_free_map() reads map->fl->cctx->vmperms[0].vmid to rec... | CVSS3: 7.8 | 0% Низкий | 2 месяца назад |
Уязвимостей на страницу