In the Linux kernel, the following vulnerability has been resolved: drm/xe/display: fix oops in suspend/shutdown without display The xe driver keeps track of whether to probe display, and whether display hardware is there, using xe->info.probe_display. It gets set to false if there's no display after intel_display_device_probe(). However, the display may also be disabled via fuses, detected at a later time in intel_display_device_info_runtime_init(). In this case, the xe driver does for_each_intel_crtc() on uninitialized mode config in xe_display_flush_cleanup_work(), leading to a NULL pointer dereference, and generally calls display code with display info cleared. Check for intel_display_device_present() after intel_display_device_info_runtime_init(), and reset xe->info.probe_display as necessary. Also do unset_display_features() for completeness, although display runtime init has already done that. This will need to be unified across all cases later. Move intel_display_device_info...

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix global performance monitor reference counting In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on the perfmon it returns, but v3d_perfmon_set_global_ioctl() and v3d_perfmon_delete() fail to release that reference on several paths: 1. v3d_perfmon_set_global_ioctl() leaks the reference on its error paths. 2. CLEAR_GLOBAL leaks both the find reference and the reference previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl that configured it. 3. Destroying a perfmon that is the current global perfmon leaks the reference stashed by the SET_GLOBAL ioctl. Release each of these references explicitly.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix vaddr leak when indirect CSD has zeroed workgroups v3d_rewrite_csd_job_wg_counts_from_indirect() maps both the indirect buffer and the workgroup buffer and is expected to release them before returning. When any of the workgroup counts read from the buffer is zero, the function bailed out early and skipped the cleanup, leaking the vaddr mappings of both BOs. Jump to the cleanup path instead of returning directly, so the mappings are always dropped.

A vulnerability has been found in Nothings stb up to 2.30. This issue affects the function stbi__gif_load_next in the library stb_image.h of the component GIF Decoder. Such manipulation leads to denial of service. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Skip CSD when it has zeroed workgroups A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2 registers. Kicking off a dispatch with a zero count in any of the three dimensions is invalid. First, the hardware will process 0 as 65536, while the user-space driver exposes a maximum of 65535. Over that, a submission with a zeroed workgroup dimension should be a no-op. These zeroed counts can reach the dispatch path through an indirect CSD job, whose workgroup counts are only known once the indirect buffer is read and may legitimately be zero, but such scenario should only result in a no-op. Overwrite the indirect CSD job workgroup counts with the indirect BO ones, even if they are zeroed, and don't submit the job to the hardware when any of the workgroup counts is zero, so the job completes immediately instead of running the shader.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;) and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since most are connector- based) 256 is a generous upper bound. (cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size [Why & How] During HDCP 2.x repeater authentication over HDMI, the driver reads the sink's RxStatus register and extracts a 10-bit message size field (max value 1023). This value is used as the read length for the ReceiverID list without being clamped to the size of the destination buffer rx_id_list[177]. A malicious HDMI repeater could advertise a message size larger than the buffer, causing an out-of-bounds write during the I2C read. Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the rx_id_list buffer, matching the approach already used in the DP branch. (cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp VBIOS HDMI retimer register count to array size [Why & How] The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9] and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated before use, so a malformed VBIOS can specify values up to 255, causing an out-of-bounds heap write during driver probe. Clamp each register count to the destination array size using min_t() before the copy loops, in both get_integrated_info_v11() and get_integrated_info_v2_1(). (cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs [Why & How] dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc without checking for NULL. A connector can be connected but not bound to any CRTC (e.g. after hot-plug before the next atomic commit), causing a kernel crash when writing to the sdp_message debugfs node. The function also ignores the user-provided size argument and always passes 36 bytes to copy_from_user(), reading past the user buffer when size < 36. Fix both issues by: - Returning -ENODEV when connector->base.state or state->crtc is NULL - Clamping write_size to min(size, sizeof(data)) (cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300)

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fib: fix stale stack leak via the OIFNAME register For NFT_FIB_RESULT_OIFNAME the destination register is declared with len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail, RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one register via "*dest = 0". The remaining three registers are left as whatever was on the stack in nft_do_chain()'s struct nft_regs, and a downstream expression that loads the register span can leak that uninitialised kernel stack to userspace. The NFTA_FIB_F_PRESENT existence check has the same shape: it is only meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type while the eval stores a single byte via nft_reg_store8(), leaving the rest of the declared span stale. Fix both: - replace the bare "*dest = 0" in the eval with nft_fib_store_result(), which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already used on the other ea...

In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Fix truncation for block sizes >= 4G When the iommu is used the linearization of the mapping can give a single block that is very large split across multiple SG entries. When __rdma_block_iter_next() reassembles the split SG entries it is overflowing the 32 bit stack values and computed the wrong DMA addresses for blocks after the truncation. Use the right types to hold DMA addresses.

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix potential unbounded skb queue virtio_transport_inc_rx_pkt() checks vvs->rx_bytes + len > vvs->buf_alloc. virtio_transport_recv_enqueue() skips coalescing for packets with VIRTIO_VSOCK_SEQ_EOM. If fed with packets with len == 0 and VIRTIO_VSOCK_SEQ_EOM, a very large number of packets can be queued because vvs->rx_bytes stays at 0. Fix this by estimating the skb metadata size: (Number of skbs in the queue) * SKB_TRUESIZE(0)

In the Linux kernel, the following vulnerability has been resolved: netfilter: require Ethernet MAC header before using eth_hdr() `ip6t_eui64`, `xt_mac`, the `bitmap:ip,mac`, `hash:ip,mac`, and `hash:mac` ipset types, and `nf_log_syslog` access `eth_hdr(skb)` after either assuming that the skb is associated with an Ethernet device or checking only that the `ETH_HLEN` bytes at `skb_mac_header(skb)` lie between `skb->head` and `skb->data`. Make these paths first verify that the skb is associated with an Ethernet device, that the MAC header was set, and that it spans at least a full Ethernet header before accessing `eth_hdr(skb)`.

In the Linux kernel, the following vulnerability has been resolved: fs/omfs: reject s_sys_blocksize smaller than OMFS_DIR_START omfs_fill_super() rejects oversized s_sys_blocksize values (> PAGE_SIZE), but it does not reject values smaller than OMFS_DIR_START (0x1b8 = 440). Later, omfs_make_empty() uses sbi->s_sys_blocksize - OMFS_DIR_START as the length argument to memset(). Since s_sys_blocksize is u32, a crafted filesystem image with s_sys_blocksize < OMFS_DIR_START causes an unsigned underflow there, wrapping to a value near 2^32. That drives a ~4 GiB memset() from bh->b_data + OMFS_DIR_START and overwrites kernel memory far beyond the backing block buffer. Add the corresponding lower-bound check alongside the existing upper-bound check in omfs_fill_super(), so that malformed images are rejected during superblock validation before any filesystem data is processed.

In the Linux kernel, the following vulnerability has been resolved: fs/mbcache: cancel shrink work before destroying the cache mb_cache_destroy() calls shrinker_free() and then frees all cache entries and the cache itself, but it does not cancel the pending c_shrink_work work item first. If mb_cache_entry_create() schedules c_shrink_work via schedule_work() and the work item is still pending or running when mb_cache_destroy() runs, mb_cache_shrink_worker() will access the cache after its memory has been freed, causing a use-after-free. This is only reachable by a privileged user (root or CAP_SYS_ADMIN) who can trigger the last put of a mounted ext2/ext4/ocfs2 filesystem. Cancel the work item with cancel_work_sync() before calling shrinker_free(), ensuring the worker has finished and will not be rescheduled before the cache is torn down.

In the Linux kernel, the following vulnerability has been resolved: drbd: Balance RCU calls in drbd_adm_dump_devices() Make drbd_adm_dump_devices() call rcu_read_lock() before rcu_read_unlock() is called. This has been detected by the Clang thread-safety analyzer.

In the Linux kernel, the following vulnerability has been resolved: block: fix zones_cond memory leak on zone revalidation error paths When blk_revalidate_disk_zones() fails after disk_revalidate_zone_resources() has allocated args.zones_cond, the memory is leaked because no error path frees it.

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix disk reference leak in blkcg_maybe_throttle_current() Add the missing put_disk() on the error path in blkcg_maybe_throttle_current(). When blkcg lookup, blkg lookup, or blkg_tryget() fails, the function jumps to the out label which only calls rcu_read_unlock() but does not release the disk reference acquired by blkcg_schedule_throttle() via get_device(). Since current->throttle_disk is already set to NULL before the lookup, blkcg_exit() cannot release this reference either, causing the disk to never be freed. Restore the reference release that was present as blk_put_queue() in the original code but was inadvertently dropped during the conversion from request_queue to gendisk.

In the Linux kernel, the following vulnerability has been resolved: md: fix array_state=clear sysfs deadlock When "clear" is written to array_state, md_attr_store() breaks sysfs active protection so the array can delete itself from its own sysfs store method. However, md_attr_store() currently drops the mddev reference before calling sysfs_unbreak_active_protection(). Once do_md_stop(..., 0) has made the mddev eligible for delayed deletion, the temporary kobject reference taken by sysfs_break_active_protection() can become the last kobject reference protecting the md kobject. That allows sysfs_unbreak_active_protection() to drop the last kobject reference from the current sysfs writer context. kobject teardown then recurses into kernfs removal while the current sysfs node is still being unwound, and lockdep reports recursive locking on kn->active with kernfs_drain() in the call chain. Reproducer on an existing level: 1. Create an md0 linear array and activate it: mknod /dev/md0 b 9 ...

In the Linux kernel, the following vulnerability has been resolved: ublk: reset per-IO canceled flag on each fetch If a ublk server starts recovering devices but dies before issuing fetch commands for all IOs, cancellation of the fetch commands that were successfully issued may never complete. This is because the per-IO canceled flag can remain set even after the fetch for that IO has been submitted - the per-IO canceled flags for all IOs in a queue are reset together only once all IOs for that queue have been fetched. So if a nonempty proper subset of the IOs for a queue are fetched when the ublk server dies, the IOs in that subset will never successfully be canceled, as their canceled flags remain set, and this prevents ublk_cancel_cmd from actually calling io_uring_cmd_done on the commands, despite the fact that they are outstanding. Fix this by resetting the per-IO cancel flags immediately when each IO is fetched instead of waiting for all IOs for the queue (which may never happ...