In the Linux kernel, the following vulnerability has been resolved: net/packet: fix TOCTOU race on mmap'd vnet_hdr in tpacket_snd() In tpacket_snd(), when PACKET_VNET_HDR is enabled, vnet_hdr points directly into the mmap'd TX ring buffer shared with userspace. The kernel validates the header via __packet_snd_vnet_parse() but then re-reads all fields later in virtio_net_hdr_to_skb(). A concurrent userspace thread can modify the vnet_hdr fields between validation and use, bypassing all safety checks. The non-TPACKET path (packet_snd()) already correctly copies vnet_hdr to a stack-local variable. All other vnet_hdr consumers in the kernel (tun.c, tap.c, virtio_net.c) also use stack copies. The TPACKET TX path is the only caller of virtio_net_hdr_to_skb() that reads directly from user-controlled shared memory. Fix this by copying vnet_hdr from the mmap'd ring buffer to a stack-local variable before validation and use, consistent with the approach used in packet_snd() and all other call...

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed When retrieving the PEK CSR, don't attempt to copy the blob to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405 CPU: 14 UID: 0 PID: 21405 Comm: syz.9.219 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, B...

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed When retrieving the PDH cert, don't attempt to copy the blobs to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033 CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. ...

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy ID to userspace if PSP command failed When retrieving the ID for the CPU, don't attempt to copy the ID blob to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388 CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_...

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix missing validation of ticket length in non-XDR key preparsing In rxrpc_preparse(), there are two paths for parsing key payloads: the XDR path (for large payloads) and the non-XDR path (for payloads <= 28 bytes). While the XDR path (rxrpc_preparse_xdr_rxkad()) correctly validates the ticket length against AFSTOKEN_RK_TIX_MAX, the non-XDR path fails to do so. This allows an unprivileged user to provide a very large ticket length. When this key is later read via rxrpc_read(), the total token size (toksize) calculation results in a value that exceeds AFSTOKEN_LENGTH_MAX, triggering a WARN_ON(). [ 2001.302904] WARNING: CPU: 2 PID: 2108 at net/rxrpc/key.c:778 rxrpc_read+0x109/0x5c0 [rxrpc] Fix this by adding a check in the non-XDR parsing path of rxrpc_preparse() to ensure the ticket length does not exceed AFSTOKEN_RK_TIX_MAX, bringing it into parity with the XDR parsing logic.

In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free Currently we execute `SET_NETDEV_DEV(dev, &priv->lowerdev->dev)` for the virt_wifi net devices. However, unregistering a virt_wifi device in netdev_run_todo() can happen together with the device referenced by SET_NETDEV_DEV(). It can result in use-after-free during the ethtool operations performed on a virt_wifi device that is currently being unregistered. Such a net device can have the `dev.parent` field pointing to the freed memory, but ethnl_ops_begin() calls `pm_runtime_get_sync(dev->dev.parent)`. Let's remove SET_NETDEV_DEV for virt_wifi to avoid bugs like this: ================================================================== BUG: KASAN: slab-use-after-free in __pm_runtime_resume+0xe2/0xf0 Read of size 2 at addr ffff88810cfc46f8 by task pm/606 Call Trace: <TASK> dump_stack_lvl+0x4d/0x70 print_report+0x170/0x4f3 ? __pfx__raw_spin_lock_irqsave+0x10/...

In the Linux kernel, the following vulnerability has been resolved: fuse: reject oversized dirents in page cache fuse_add_dirent_to_cache() computes a serialized dirent size from the server-controlled namelen field and copies the dirent into a single page-cache page. The existing logic only checks whether the dirent fits in the remaining space of the current page and advances to a fresh page if not. It never checks whether the dirent itself exceeds PAGE_SIZE. As a result, a malicious FUSE server can return a dirent with namelen=4095, producing a serialized record size of 4120 bytes. On 4 KiB page systems this causes memcpy() to overflow the cache page by 24 bytes into the following kernel page. Reject dirents that cannot fit in a single page before copying them into the readdir cache.

In the Linux kernel, the following vulnerability has been resolved: cifs: some missing initializations on replay In several places in the code, we have a label to signify the start of the code where a request can be replayed if necessary. However, some of these places were missing the necessary reinitializations of certain local variables before replay. This change makes sure that these variables get initialized after the label.

In the Linux kernel, the following vulnerability has been resolved: rtnetlink: add missing netlink_ns_capable() check for peer netns rtnl_newlink() lacks a CAP_NET_ADMIN capability check on the peer network namespace when creating paired devices (veth, vxcan, netkit). This allows an unprivileged user with a user namespace to create interfaces in arbitrary network namespaces, including init_net. Add a netlink_ns_capable() check for CAP_NET_ADMIN in the peer namespace before allowing device creation to proceed.

In the Linux kernel, the following vulnerability has been resolved: igb: remove napi_synchronize() in igb_down() When an AF_XDP zero-copy application terminates abruptly (e.g., kill -9), the XSK buffer pool is destroyed but NAPI polling continues. igb_clean_rx_irq_zc() repeatedly returns the full budget, preventing napi_complete_done() from clearing NAPI_STATE_SCHED. igb_down() calls napi_synchronize() before napi_disable() for each queue vector. napi_synchronize() spins waiting for NAPI_STATE_SCHED to clear, which never happens. igb_down() blocks indefinitely, the TX watchdog fires, and the TX queue remains permanently stalled. napi_disable() already handles this correctly: it sets NAPI_STATE_DISABLE. After a full-budget poll, __napi_poll() checks napi_disable_pending(). If set, it forces completion and clears NAPI_STATE_SCHED, breaking the loop that napi_synchronize() cannot. napi_synchronize() was added in commit 41f149a285da ("igb: Fix possible panic caused by Rx traffic arrival...

In the Linux kernel, the following vulnerability has been resolved: firmware: thead: Fix buffer overflow and use standard endian macros Addresses two issues in the TH1520 AON firmware protocol driver: 1. Fix a potential buffer overflow where the code used unsafe pointer arithmetic to access the 'mode' field through the 'resource' pointer with an offset. This was flagged by Smatch static checker as: "buffer overflow 'data' 2 <= 3" 2. Replace custom RPC_SET_BE* and RPC_GET_BE* macros with standard kernel endianness conversion macros (cpu_to_be16, etc.) for better portability and maintainability. The functionality was re-tested with the GPU power-up sequence, confirming the GPU powers up correctly and the driver probes successfully. [ 12.702370] powervr ffef400000.gpu: [drm] loaded firmware powervr/rogue_36.52.104.182_v1.fw [ 12.711043] powervr ffef400000.gpu: [drm] FW version v1.0 (build 6645434 OS) [ 12.719787] [drm] Initialized powervr 1.0.0 for ffef400000.gpu on minor 0

In the Linux kernel, the following vulnerability has been resolved: EDAC/mc: Fix error path ordering in edac_mc_alloc() When the mci->pvt_info allocation in edac_mc_alloc() fails, the error path will call put_device() which will end up calling the device's release function. However, the init ordering is wrong such that device_initialize() happens *after* the failed allocation and thus the device itself and the release function pointer are not initialized yet when they're called: MCE: In-kernel MCE decoding enabled. ------------[ cut here ]------------ kobject: '(null)': is not initialized, yet kobject_put() is being called. WARNING: lib/kobject.c:734 at kobject_put, CPU#22: systemd-udevd CPU: 22 UID: 0 PID: 538 Comm: systemd-udevd Not tainted 7.0.0-rc1+ #2 PREEMPT(full) RIP: 0010:kobject_put Call Trace: <TASK> edac_mc_alloc+0xbe/0xe0 [edac_core] amd64_edac_init+0x7a4/0xff0 [amd64_edac] ? __pfx_amd64_edac_init+0x10/0x10 [amd64_edac] do_one_initcall ... Reorder the calling sequence so...

In the Linux kernel, the following vulnerability has been resolved: gpio: omap: do not register driver in probe() Commit 11a78b794496 ("ARM: OMAP: MPUIO wake updates") registers the omap_mpuio_driver from omap_mpuio_init(), which is called from omap_gpio_probe(). However, it neither makes sense to register drivers from probe() callbacks of other drivers, nor does the driver core allow registering drivers with a device lock already being held. The latter was revealed by commit dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()") leading to a potential deadlock condition described in [1]. Additionally, the omap_mpuio_driver is never unregistered from the driver core, even if the module is unloaded. Hence, register the omap_mpuio_driver from the module initcall and unregister it in module_exit().

In the Linux kernel, the following vulnerability has been resolved: mm/kasan: fix double free for kasan pXds kasan_free_pxd() assumes the page table is always struct page aligned. But that's not always the case for all architectures. E.g. In case of powerpc with 64K pagesize, PUD table (of size 4096) comes from slab cache named pgtable-2^9. Hence instead of page_to_virt(pxd_page()) let's just directly pass the start of the pxd table which is passed as the 1st argument. This fixes the below double free kasan issue seen with PMEM: radix-mmu: Mapped 0x0000047d10000000-0x0000047f90000000 with 2.00 MiB pages ================================================================== BUG: KASAN: double-free in kasan_remove_zero_shadow+0x9c4/0xa20 Free of addr c0000003c38e0000 by task ndctl/2164 CPU: 34 UID: 0 PID: 2164 Comm: ndctl Not tainted 6.19.0-rc1-00048-gea1013c15392 #157 VOLUNTARY Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_012) hv:phyp ...

In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_eui64: reject invalid MAC header for all packets `eui64_mt6()` derives a modified EUI-64 from the Ethernet source address and compares it with the low 64 bits of the IPv6 source address. The existing guard only rejects an invalid MAC header when `par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()` can still reach `eth_hdr(skb)` even when the MAC header is not valid. Fix this by removing the `par->fragoff != 0` condition so that packets with an invalid MAC header are rejected before accessing `eth_hdr(skb)`.

In the Linux kernel, the following vulnerability has been resolved: net: sched: act_csum: validate nested VLAN headers tcf_csum_act() walks nested VLAN headers directly from skb->data when an skb still carries in-payload VLAN tags. The current code reads vlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without first ensuring that the full VLAN header is present in the linear area. If only part of an inner VLAN header is linearized, accessing h_vlan_encapsulated_proto reads past the linear area, and the following skb_pull(VLAN_HLEN) may violate skb invariants. Fix this by requiring pskb_may_pull(skb, VLAN_HLEN) before accessing and pulling each nested VLAN header. If the header still is not fully available, drop the packet through the existing error path.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: avoid OGM aggregation when skb tailroom is insufficient When OGM aggregation state is toggled at runtime, an existing forwarded packet may have been allocated with only packet_len bytes, while a later packet can still be selected for aggregation. Appending in this case can hit skb_put overflow conditions. Reject aggregation when the target skb tailroom cannot accommodate the new packet. The caller then falls back to creating a new forward packet instead of appending.

In the Linux kernel, the following vulnerability has been resolved: bridge: br_nd_send: linearize skb before parsing ND options br_nd_send() parses neighbour discovery options from ns->opt[] and assumes that these options are in the linear part of request. Its callers only guarantee that the ICMPv6 header and target address are available, so the option area can still be non-linear. Parsing ns->opt[] in that case can access data past the linear buffer. Linearize request before option parsing and derive ns from the linear network header.

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_multiport: validate range encoding in checkentry ports_match_v1() treats any non-zero pflags entry as the start of a port range and unconditionally consumes the next ports[] element as the range end. The checkentry path currently validates protocol, flags and count, but it does not validate the range encoding itself. As a result, malformed rules can mark the last slot as a range start or place two range starts back to back, leaving ports_match_v1() to step past the last valid ports[] element while interpreting the rule. Reject malformed multiport v1 rules in checkentry by validating that each range start has a following element and that the following element is not itself marked as another range start.

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: flowlabel: defer exclusive option free until RCU teardown `ip6fl_seq_show()` walks the global flowlabel hash under the seq-file RCU read-side lock and prints `fl->opt->opt_nflen` when an option block is present. Exclusive flowlabels currently free `fl->opt` as soon as `fl->users` drops to zero in `fl_release()`. However, the surrounding `struct ip6_flowlabel` remains visible in the global hash table until later garbage collection removes it and `fl_free_rcu()` finally tears it down. A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that early `kfree()` and dereference freed option state, triggering a crash in `ip6fl_seq_show()`. Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches the lifetime already required for the enclosing flowlabel while readers can still reach it under RCU.